Asus p5k se epu руководство

Asus P5K SE EPU User Manual

  • Contents

  • Table of Contents

  • Bookmarks

Quick Links

loading

Related Manuals for Asus P5K SE EPU

Summary of Contents for Asus P5K SE EPU

  • Page 1
    P5K SE/EPU…
  • Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
  • Page 3: Table Of Contents

    Welcome! ………………1-1 Package contents …………….. 1-1 Special features …………….1-2 1.3.1 Product highlights …………1-2 1.3.2 ASUS AI Lifestyle features ……….1-4 1.3.3 ASUS Stylish features …………. 1-5 1.3.4 ASUS Intelligent Overclocking features ……1-6 Chapter 2: Hardware information Before you proceed …………..

  • Page 4: Contents

    4.1.1 ASUS Update utility …………4-1 4.1.2 Creating a bootable floppy disk ……..4-4 4.1.3 ASUS EZ Flash 2 utility ……….. 4-5 4.1.4 AFUDOS utility …………..4-6 4.1.5 ASUS CrashFree BIOS 3 utility ……..4-8 BIOS setup program …………..4-9 4.2.1…

  • Page 5
    4.6.2 Boot Settings Configuration ………. 4-30 4.6.3 Security …………….. 4-31 Tools menu …………….. 4-33 4.7.1 ASUS EZ Flash 2 …………4-33 4.7.2 ASUS O.C. Profile …………4-34 Exit menu ………………4-35 Chapter 5: Software support Installing an operating system ……….. 5-1 Support CD information …………..
  • Page 6
    Contents 5.3.3 ASUS PC Probe II …………5-14 5.3.4 ASUS AI Suite …………… 5-20 5.3.5 ASUS EPU Utility — AI Gear 3 ……..5-22 5.3.6 ASUS AI Nap …………..5-24 5.3.7 ASUS Q-Fan 2 ………….. 5-25 5.3.8 ASUS AI Booster …………5-26…
  • Page 7: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.

  • Page 8: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 9: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 10: Conventions Used In This Guide

    Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 11: P5K Se/Epu Specifications Summary

    — 4 x 240-pin DIMM sockets support unbuffered non-ECC DDR2 1200/1066/800/667MHz memory modules — Supports up to 8 GB system memory * Refer to www.asus.com or this user manual for the Memory QVL (Qualified Vendors Lists). Expansion slots 1 x PCI Express™ x16 slot…

  • Page 12
    System panel connector (Q-Connector) BIOS features 8 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM 2.0, SM BIOS 2.3, ACPI 2.0a, ASUS EZ Flash 2, ASUS CrashFree BIOS 3 Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE…
  • Page 13: Chapter 1: Product Introduction

    This chapter describes the motherboard features and the new technologies it supports. Chapter 1: Product introduction…

  • Page 14
    Chapter summary Welcome! ………………1-1 Package contents …………….. 1-1 Special features …………….1-2 ASUS P5K SE/EPU…
  • Page 15: Welcome

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

  • Page 16: Special Features

    Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packaging to safeguard consumers’ health while minimizing the impact on the environment.

  • Page 17: High Definition Audio

    Audio CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature, and multi-streaming technology that simultaneously sends different audio streams to different destinations. You can now talk to your partners on the headphone while playing multi-channel network games. See pages 2-24 and 2-25 for details. ASUS P5K SE/EPU…

  • Page 18: Asus Ai Lifestyle Features

    1.3.2 ASUS AI Lifestyle features ASUS Power Saving Solution ASUS Power Saving solution makes system more stable and enhances the overclocking capability. ASUS EPU The ASUS EPU utilizes innovative technology to digitally monitor and tune the CPU power supply with improved VR responses in heavy or light loadings.

  • Page 19: Asus Stylish Features

    Smart Support CD It provides a checklist to allow the user to see which drivers are already installed, as well as those that aren’t. When using ASUS PC Probe II, you can easily see the critical parts of the computer.

  • Page 20: Asus Intelligent Overclocking Features

    1.3.4 ASUS Intelligent Overclocking features AI Booster The ASUS AI Booster allows you to overclock the CPU speed in Windows environment without the hassle of booting the BIOS. See page 5-26 for details. Precision Tweaker This feature allows you to fine tune the CPU/memory voltage and gradually increase the memory Front Side Bus (FSB) and PCI Express frequency at 1MHz increment to achieve maximum system performance.

  • Page 21: Chapter 2: Hardware Information

    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Chapter 2: Hardware information…

  • Page 22
    Chapter summary Before you proceed …………..2-1 Motherboard overview …………..2-2 Central Processing Unit (CPU) ……….. 2-6 System memory …………….. 2-13 Expansion slots …………….2-19 Jumpers ………………2-22 Connectors …………….. 2-24 ASUS P5K SE/EPU…
  • Page 23: Before You Proceed

    The illustration below shows the location of the onboard LED. SB_PWR ® Standby Powered Power P5K SE/EPU Onboard LED ASUS P5K SE/EPU…

  • Page 24: Motherboard Overview

    Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.

  • Page 25: Motherboard Layout

    Lithium Cell PCIEX1_1 CMOS Power SATA2 SATA1 Super ALC883 SPDIF_OUT CLRTC PWR_FAN PCIEX1_2 USBPW9-12 CHA_FAN BIOS SB_PWR PRI_EIDE COM1 USB1112 USB910 AAFP PANEL Refer to 2.7 Connectors for more information about rear panel connectors and internal connectors. ASUS P5K SE/EPU…

  • Page 26: Layout Contents

    2.2.4 Layout contents Slots Page DDR2 DIMM slots 2-13 PCI slots 2-21 PCI Express x1 slot 2-21 PCI Express x16 slots 2-21 Jumper Page Clear RTC RAM (3-pin CLRTC) 2-22 Keyboard power (3-pin PS2_USBPW) 2-23 USB device wake-up (3-pin USBPW1-4, USBPW5-8, USB9-12) 2-23 Rear panel connectors Page…

  • Page 27
    • System power LED (2-pin PLED) • Hard disk drive activity LED (2-pin IDE_LED) • System warning speaker (4-pin SPEAKER) • ATX power button/soft-off button (2-pin PWRSW) • Reset button (2-pin RESET) ASUS Q-connector (system panel) 2-35 ASUS P5K SE/EPU…
  • Page 28: Central Processing Unit (Cpu)

    ASUS will shoulder the cost of repair only if the damage is shipment/transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA775 socket.

  • Page 29: Installing The Cpu

    This side of the socket box should face you. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. Lift the load lever in the direction of the arrow to a 135º angle. ASUS P5K SE/EPU…

  • Page 30
    Lift the load plate with your thumb and forefinger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B). Load plate Alignment key Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then fit the socket…
  • Page 31: Installing The Cpu Heatsink And Fan

    CPU fan connector. Motherboard hole Fastener Narrow end of the groove Make sure to orient each fastener with the narrow end of the groove pointing outward. (The photo shows the groove shaded for emphasis.) ASUS P5K SE/EPU…

  • Page 32
    Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. CPU_FAN ® P5K SE/EPU CPU fan connector Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.
  • Page 33
    Rotate each fastener counterclockwise. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. Carefully remove the heatsink and fan assembly from the motherboard. ASUS P5K SE/EPU 2-11…
  • Page 34
    Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.) Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation.
  • Page 35: System Memory

    The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. The figure illustrates the location of the DDR2 DIMM sockets: ® P5K SE/EPU 240-pin DDR2 DIMM sockets Channel Sockets Channel A DIMM_A1 and DIMM_B1 Channel B DIMM_A2 and DIMM_B2 ASUS P5K SE/EPU 2-13…

  • Page 36: Memory Configurations

    2.4.2 Memory configurations You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets. Recommended Memory Configurations Sockets Mode DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 Populated Single-Channel Populated Dual-channel (1) Populated Populated Dual-channel (2) Populated Populated Populated…

  • Page 37
    CM2X1024 — 9136C5D / XMS9105V1.1 • If you install a DDR2-1066 memory module whose SPD is DDR2-800, make sure that you set the DRAM Frequency item in BIOS to [DDR2-1066MHz]. See section 4.4.1 Jumperfree Configuration for details. ASUS P5K SE/EPU 2-15…
  • Page 38
    P5K SE/EPU Motherboard Qualified Vendors Lists (QVL) DDR2-800 MHz capability DIMM support Chip Size Vendor Chip No. Part No. Brand 512MB KINGSTON K4T51083QC KVR800D2N5/512 • • • 1024MB KINGSTON Heat-Sink Package 4-4-4-12 KHX6400D2LL/1G • • 1024MB KINGSTON Heat-Sink Package 4-4-4-12 KHX6400D2LLK2/1GN •…
  • Page 39: Asus P5K Se/Epu

    Dual-channel memory configuration. • C*: Supports 4 modules inserted into both the yellow and black slots as two pairs of Dual-channel memory configuration. Visit the ASUS website for the latest DDR2-1066/800/667MHz QVL. ASUS P5K SE/EPU 2-17…

  • Page 40: Installing A Dimm

    2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. To install a DIMM: DDR2 DIMM notch Unlock a DIMM socket by pressing the retaining clips outward.

  • Page 41: Expansion Slots

    IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Refer to the table on the next page for details. ASUS P5K SE/EPU 2-19…

  • Page 42: Interrupt Assignments

    2.5.3 Interrupt assignments Standard function System timer Keyboard controller Re-direct to IRQ#9 IRQ holder for PCI steering* Communications port (COM1)* IRQ holder for PCI steering* Floppy disk controller IRQ holder for PCI steering* System CMOS/Real Time Clock IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering* IRQ holder for PCI steering*…

  • Page 43: Pci Slots

    PCI Express x1 slot. 2.5.6 PCI Express x16 slot This motherboard supports one PCI Express x16 graphics card that complies with the PCI Express specifications. The figure shows a graphics card installed on the PCI Express x16 slot. ASUS P5K SE/EPU 2-21…

  • Page 44: Clear Rtc Ram

    Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.

  • Page 45
    500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS P5K SE/EPU 2-23…
  • Page 46: Connectors

    Connectors 2.7.1 Rear panel connectors PS/2 keyboard port (purple). This port is for a PS/2 keyboard. LAN (RJ-45) port. Supported by Gigabit LAN controller, this port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. Center/Subwoofer port (orange).

  • Page 47
    12. Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable. 13. USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. ASUS P5K SE/EPU 2-25…
  • Page 48: Internal Connectors

    2.7.2 Internal connectors Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.

  • Page 49
    If any device jumper is set as “Cable-Select,” make sure all other device jumpers have the same setting. ® PRI_EIDE PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. P5K SE/EPU IDE connector ASUS P5K SE/EPU 2-27…
  • Page 50
    ICH9 Serial ATA connectors (7-pin SATA1-4) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. SATA3 SATA4 SATA1 SATA2 SATA3 SATA4 ® P5B SATA Connectors SATA2 SATA1 P5K SE/EPU SATA connectors When using the connectors in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1/2 connector.
  • Page 51
    Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. ® SPDIF_OUT P5K SE/EPU Digital audio connector The S/PDIF module is purchased separately. ASUS P5K SE/EPU 2-29…
  • Page 52: Usb Connectors

    Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.

  • Page 53
    ® PWR_FAN CHA_FAN P5K SE/EPU Fan connectors Only the CPU_FAN and CHA_FAN connector support the ASUS Q-FAN 2 feature. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
  • Page 54: Chassis Intrusion Connector

    Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced.

  • Page 55
    CPU: Intel Pentium Extreme 3.73GHz ® ® Memory: 512 MB DDR2 (x4) Graphics card: ASUS EAX1900XT Parallel ATA device: IDE hard disk drive Serial ATA device: SATA hard disk drive (x2) Optical drive: DVD-RW ASUS P5K SE/EPU 2-33…
  • Page 56: System Panel Connector

    12. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. PLED SPEAKER PANEL ® RESET IDE_LED PWRSW Requires an ATX power supply. P5K SE/EPU System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.

  • Page 57
    Q-Connector (system panel) You can use ASUS Q-Connector to connect / disconnect chassis front panel cables by only a few steps. Directions below shows how to install ASUS Q-Connector. Step1. Connect correct front panel to ASUS Q-Connector first. You can refer to the marking on Q-Connector itself to know the detail pin definition.
  • Page 58
    2-36 Chapter 2: Hardware information…
  • Page 59: Chapter 3: Powering Up

    This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system. Chapter 3: Powering up…

  • Page 60
    Chapter summary Starting up for the first time …………3-1 Turning off the computer …………. 3-2 ASUS P5K SE/EPU…
  • Page 61: Starting Up For The First Time

    One continuous beep followed by three No VGA detected short beeps One continuous beep followed by four Hardware component failure short beeps At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS P5K SE/EPU…

  • Page 62: Turning Off The Computer

    Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows ® Click the Start button then select Turn Off Computer. Click the Turn Off button to shut down the computer. The power supply should turn off after Windows ®…

  • Page 63: Chapter 4: Bios Setup

    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Chapter 4: BIOS setup…

  • Page 64
    Chapter summary Managing and updating your BIOS ……….4-1 BIOS setup program …………..4-9 Main menu ……………… 4-12 Advanced menu …………….. 4-16 Power menu …………….4-25 Boot menu ……………… 4-29 Tools menu …………….. 4-33 Exit menu ………………4-35 ASUS P5K SE/EPU…
  • Page 65: Managing And Updating Your Bios

    ASUS Update (Updates the BIOS in Windows environment.) ® ASUS EZ Flash 2 (Updates the BIOS using a floppy disk or USB flash disk.) AFUDOS utility (Updates the BIOS using a bootable floppy disk.) ASUS CrashFree BIOS 3 (Updates the BIOS using a bootable floppy disk, USB flash disk or the motherboard support CD when the BIOS file fails or gets corrupted.)

  • Page 66
    To update the BIOS through the Internet: desktop by clicking Start Launch the ASUS Update utility from the Windows ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from the Select the ASUS FTP site nearest…
  • Page 67
    To update the BIOS through a BIOS file: desktop by clicking Start Launch the ASUS Update utility from the Windows ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from a file option from the drop-down menu, then click Next.
  • Page 68: Creating A Bootable Floppy Disk

    4.1.2 Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk. DOS environment a. Insert a 1.44MB floppy disk into the drive. b. At the DOS prompt, type format A:/S then press <Enter>. Windows XP environment ®…

  • Page 69: Asus Ez Flash 2 Utility

    4.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing <Alt>…

  • Page 70: Afudos Utility

    Updating the BIOS file To update the BIOS file using the AFUDOS utility: Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. Chapter 4: BIOS setup…

  • Page 71
    A:>afudos /iP5KSE.ROM The utility verifies the file and starts updating the BIOS. A:>afudos /iP5KSE.ROM AMI Firmware Update Utility — Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ..
  • Page 72: Asus Crashfree Bios 3 Utility

    4.1.5 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or a USB flash disk that contains the updated BIOS file.

  • Page 73: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS P5K SE/EPU…

  • Page 74: Bios Menu Screen

    4.2.1 BIOS menu screen Menu items Menu bar Configuration fields General help BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit Use [ENTER], [TAB] or System Time [10:55:25] [SHIFT-TAB] to select System Date [Mon 01/28/2008] a field. Legacy Diskette A [1.44M, 3.5 in] Use [+] or [-] to configure system Time.

  • Page 75: Menu Items

    Up/Down arrow keys or <Page Up> /<Page Down> keys to display the other items on the screen. 4.2.9 General help Pop-up window At the top right corner of the menu screen Scroll bar is a brief description of the selected item. ASUS P5K SE/EPU 4-11…

  • Page 76: Main Menu

    Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section 4.2.1 BIOS menu screen for information on the menu screen items and how to navigate through them. BIOS SETUP UTILITY Main Advanced…

  • Page 77: Sata 1-4

    When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] ASUS P5K SE/EPU 4-13…

  • Page 78: Sata Configuration

    DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer.

  • Page 79: System Information

    Available : 1024 MB General Help Save and Exit Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. ASUS P5K SE/EPU 4-15…

  • Page 80: Advanced Menu

    Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. BIOS SETUP UTILITY Main Advanced Power…

  • Page 81
    Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [DDR2-667MHz] [DDR2-800MHz] [DDR2-1066MHz] [DDR2-1200MHz] Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. ASUS P5K SE/EPU 4-17…
  • Page 82
    DRAM Timing Control [Auto] Allows you to set the DRAM timing control. Configuration options: [Auto] [MANUAL] The following items appear when you set the DRAM Timing Control item to [Manual]. CAS# Latency [ 5] Configuration options: [3] [4] [5] [6] RAS# to CAS# Delay [ 5 DRAM Clocks] Configuration options: [3 DRAM Clocks] [4 DRAM Clocks]~[9 DRAM Clocks] [10 DRAM Clocks]…
  • Page 83: Ai Net 2

    Allows you to enable or disable LAN cable check during POST. When enabled, the menu reports the cable faults or shorts, and displays the point (length) where the faults or shorts are detected. Configuration options: [Disabled] [Enabled] ASUS P5K SE/EPU 4-19…

  • Page 84: Usb Configuration

    4.4.3 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the configuration options. BIOS SETUP UTILITY Advanced USB Configuration Options USB Devices Enabled: Disabled None Enhanced USB Functions [Enabled] USB 2.0 Controller [Enabled]…

  • Page 85: Cpu Configuration

    Allows you to enable or disable C1E Support. Configuration options: [Disabled] [Enabled] Max CPUID Value Limit [Disabled] Setting this item to [Enabled] allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] ASUS P5K SE/EPU 4-21…

  • Page 86: Chipset

    Vanderpool Technology [Enabled] Configuration options: [Enabled] [Disabled] CPU TM Function [Enabled] Configuration options: [Disabled] [Enabled] Execute Disable Bit [Enabled] Allows you to enable or disable the No-Execution Page Protection Technology. Setting this item to [Disabled] forces the XD feature flag to always return to zero (0).

  • Page 87: Onboard Devices Configuration

    AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] Marvell IDE Controller [Enabled] Allows you to disable or enable the onboard Marvell IDE controller. ® Configuration options: [Enabled] [Disabled] ASUS P5K SE/EPU 4-23…

  • Page 88: Pci Pnp

    Onboard PCIE GbE LAN [Enabled] Configuration options: [Enabled] [Disabled] LAN Option ROM [Disabled] This item appears only when you enable the previous item. Configuration options: [Disabled] [Enabled] Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] 4.4.7 PCI PnP…

  • Page 89: Power Menu

    Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] ASUS P5K SE/EPU 4-25…

  • Page 90: Apm Configuration

    4.5.5 APM Configuration BIOS SETUP UTILITY Power APM Configuration <Enter> to select whether or not to restart the system after AC power loss. Restore on AC Power Loss [Power Off] Power On By RTC Alarm [Disabled] Power On By External Modems [Disabled] Power On By PCI Devices [Disabled]…

  • Page 91: Hardware Monitor

    N/A. CPU Q-Fan Control [Disabled] Allows you to enable or disable the CPU Q-Fan controller. Configuration options: [Disabled] [Enabled] The CPU Fan Profile item appears when you enable the CPU Q-Fan Control feature. ASUS P5K SE/EPU 4-27…

  • Page 92
    CPU Fan Profile [Optimal] Allows you to set the appropriate performance level of the CPU Q-Fan. When set to [Optimal], the CPU fan automatically adjusts depending on the CPU temperature. Set this item to [Silent Mode] to minimize fan speed for quiet CPU fan operation, or [Performance Mode] to achieve maximum CPU fan speed.
  • Page 93: Boot Menu

    These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Configuration options: [1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM] [Disabled] ASUS P5K SE/EPU 4-29…

  • Page 94: Boot Settings Configuration

    Configuration options: [Disabled] [Enabled] Full Screen Logo [Enabled] This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo2 feature. ™ AddOn ROM Display Mode [Force BIOS] Sets the display mode for option ROM.

  • Page 95: Security

    Time Clock (RTC) RAM. See section 2.6 Jumper for information on how to erase the RTC RAM. After you have set a supervisor password, the other items appear to allow you to change other security settings. ASUS P5K SE/EPU 4-31…

  • Page 96: Change User Password

    BIOS SETUP UTILITY Boot <Enter> to change Security Settings password. <Enter> again to Supervisor Password :Installed disabled password. User Password :Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup] Select Screen Select Item Enter Change General Help…

  • Page 97: Tools Menu

    4.7.1 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice. Please see section 4.1.3 for details.

  • Page 98: Asus O.c. Profile

    Start O.C. Profile Allows you to run the utility to save and load CMOS. Press <Enter> to run the utility. ASUSTek O.C. Profile Utility V1.05 Current CMOS Restore CMOS BOARD: P5K SE EPU BOARD: Unknown VER: 0110 VER: Unknown DATE:…

  • Page 99: Exit Menu

    Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select Ok to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. ASUS P5K SE/EPU 4-35…

  • Page 100
    4-36 Chapter 4: BIOS setup…
  • Page 101: Chapter 5: Software Support

    This chapter describes the contents of the support CD that comes with the motherboard package. Software Chapter 5: support…

  • Page 102
    Chapter summary Installing an operating system ……….. 5-1 Support CD information ………….. 5-1 Software information …………..5-8 ASUS P5K SE/EPU…
  • Page 103: Installing An Operating System

    The contents of the support CD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 5.2.1 Running the support CD Place the support CD to the optical drive.

  • Page 104: Drivers Menu

    6111 Serial ATA controller driver. ® USB 2.0 Driver Installs the Universal Serial Bus 2.0 (USB 2.0) driver. AI Gear 3+ Driver Installs the EPU and AI Gear 3 driver. Install this driver before the ASUS AI Suite utility. Chapter 5: Software support…

  • Page 105: Utilities Menu

    Installs all of the utilities through the Installation Wizard. ASUS Update Allows you to download the latest version of the BIOS from the ASUS website. Before using the ASUS Update, make sure that you have an Internet connection so you can connect to the ASUS website.

  • Page 106
    You can also install the following utilities from the ASUS Superb Software Library CD. ADOBE Acrobat Reader V7.0 Installs the Adobe Acrobat Reader that allows you to open, view, and print ® ® documents in Portable Document Format (PDF). Microsoft DirectX 9.0c Installs the Microsoft DirectX 9.0 driver.
  • Page 107: Manual Menu

    Reader from the ASUS Superb Software Library CD before ® ® opening a user manual file. 5.2.5 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. ASUS P5K SE/EPU…

  • Page 108: Other Information

    5.2.6 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this CD Displays the support CD contents in graphical format.

  • Page 109: Technical Support Form

    Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support CD and a brief description of each in text format. ASUS P5K SE/EPU…

  • Page 110: Software Information

    5.3.1 ASUS MyLogo2™ The ASUS MyLogo2™ utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On Self-Tests (POST). The ASUS MyLogo2™ is automatically installed when you install the ASUS Update utility from the Support CD.

  • Page 111
    Ratio box. When the screen returns to the ASUS Update utility, flash the original BIOS to load the new boot logo. 10. After flashing the BIOS, restart the computer to display the new boot logo during POST.
  • Page 112: Audio Configurations

    5.3.2 Audio configurations The Realtek ALC883 audio CODEC provides 8-channel audio capability to deliver ® the ultimate audio experience on your computer. The software provides Jack- Sensing function, S/PDIF Out support, and interrupt capability. The ALC883 also includes the Realtek ®…

  • Page 113: Configuration Options

    Click the shortcut buttons or the drop-down menus for options on changing the acoustic environment, adjust the equalizer, or set the karaoke to your desired settings. Click to effect the Sound Effect settings and exit. ASUS P5K SE/EPU 5-11…

  • Page 114
    Mixer The Mixer option allows you to configure audio output (playback) volume and audio input (record) volume. To set the mixer options: From the Realtek HD Audio Manager, click the Mixer tab. Turn the volume buttons to adjust the Playback and/or Record volume.
  • Page 115
    From the Realtek HD Audio Manager, click the 3D Audio Demo tab. Click the option buttons to change the sound, moving path, or environment settings. Click to test your settings. Click to effect the 3D Audio Demo settings and exit. ASUS P5K SE/EPU 5-13…
  • Page 116: Asus Pc Probe Ii

    To launch the PC Probe II from the Windows ® > ASUS > PC Probe II > PC Probe II v1.xx.xx. The PC Probe II main window appears. After launching the application, the PC Probe II icon appears in the Windows ®…

  • Page 117
    When a system sensor detects a problem, the main window right handle turns red, as the illustrations below show. When displayed, the monitor panel for that sensor also turns red. Refer to the Monitor panels section for details. ASUS P5K SE/EPU 5-15…
  • Page 118
    Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small). When you check the Enable Monitoring Panel option from the Preference section, the monitor panels appear on your computer’s desktop.
  • Page 119
    You can enlarge or reduce the browser size by dragging the bottom right corner of the browser. DMI browser Click to display the DMI (Desktop Management Interface) browser. This browser displays various desktop and system information. Click the plus sign (+) before DMI Information to display the available information. ASUS P5K SE/EPU 5-17…
  • Page 120
    PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard disk drive space, and memory usage.
  • Page 121
    The Preference tab allows you to customize sensor alerts, or change the temperature scale. Loads the default Loads your saved threshold values for Cancels or configuration each sensor ignores your changes Applies your Saves your changes configuration ASUS P5K SE/EPU 5-19…
  • Page 122: Asus Ai Suite

    ASUS AI Suite allows you to launch AI Gear 3 , AI Booster, AI Nap, and Q-Fan 2 utilities easily. Install the AI Gear 3+ Driver before the ASUS AI Suite utility. Otherwise, the ASUS AI Suite will not function properly. Installing AI Suite To install AI Suite on your computer: Place the support DVD to the optical drive.

  • Page 123
    Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/CPU frequency Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit. ASUS P5K SE/EPU 5-21…
  • Page 124: Asus Epu Utility — Ai Gear 3

    After installing ASUS AI Suite from the bundled support DVD, you can launch ASUS AI Gear 3 by double-clicking the AI Suite icon on your Windows OS taskbar and then click the AI Gear 3 button on the AI Suite main window.

  • Page 125
    Electricity Savings Calculator window. You may reset the Click time for the calculator to start counting. Click to reset the time the calculator starts Displays the electricity saved since the time was reset ASUS P5K SE/EPU 5-23…
  • Page 126: Asus Ai Nap

    5.3.6 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away. Enable this feature for minimum power consumption and a more quiet system operation. After installing AI Suite from the bundled support CD, you can launch the utility by double-clicking the AI Suite icon on the Windows OS taskbar and click the AI Nap button on the AI Suite main window.

  • Page 127: Asus Q-Fan 2

    5.3.7 ASUS Q-Fan 2 This ASUS Q-Fan 2 Control feature allows you to set the appropriate performance level of the CPU Q-Fan 2 or the Chassis Q-Fan 2 for more efficient system operation. After enabling the Q-Fan 2 function, the fans can be set to automatically adjust depending on the temperature, to decrease fan speed, or to achieve the maximum fan speed.

  • Page 128: Asus Ai Booster

    5.3.8 ASUS AI Booster The ASUS AI Booster application allows you to overclock the CPU speed in WIndows environment without the hassle of booting the BIOS. ® After installing AI Suite from the bundled support CD, you can launch the utility…

  • Page 129: Appendix: Cpu Features

    The Appendix describes the CPU features and technologies that the motherboard supports. Appendix: CPU features…

  • Page 130: A.1 Intel ® Em64T

    Chapter summary Intel ® EM64T ………………A-1 Enhanced Intel SpeedStep Technology (EIST) ……A-1 ® Intel Hyper-Threading Technology ………..A-3 ® ASUS P5K SE/EPU…

  • Page 131: Intel ® Em64T

    32-bit operating systems. • The motherboard comes with a BIOS file that supports EM64T. You can download the latest BIOS file from the ASUS website (www.asus.com/ support/download/) if you need to update the BIOS file. See Chapter 4 for details.

  • Page 132: Using The Eist

    A.2.2 Using the EIST To use the EIST feature: Turn on the computer, then enter the BIOS Setup. Go to the Advanced Menu, highlight CPU Configuration, then press <Enter>. Set the Intel(R) SpeedStep Technology item to [Automatic], then press <Enter>. Press <F10>…

  • Page 133: Intel ® Hyper-Threading Technology

    Power up the system and enter the BIOS Setup. Under the Advanced Menu, make sure that the item Hyper-Threading Technology is set to [Enabled]. The BIOS item appears only if you installed a CPU that supports Hyper-Threading Technology. Restart the computer. ASUS P5K SE/EPU…

  • Page 134
    Appendix: CPU features…

  • Драйверы

    19

  • Инструкции по эксплуатации

    13

Языки:

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(134 страницы)

  • Языки:Английский
  • Тип:
    PDF
  • Размер:
    5.23 MB
  • Описание:
    P5K SE/EPU user’s manual(English)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(134 страницы)

  • Языки:Английский
  • Тип:
    PDF
  • Размер:
    5.23 MB
  • Описание:
    P5K SE/EPU user’s manual(English)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(40 страниц)

  • Языки:Молдавский, Немецкий
  • Тип:
    PDF
  • Размер:
    1.65 MB
  • Описание:
    Motherboard Installation Guide (German)
    Motherboard Installation Guide (German)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(134 страницы)

  • Языки:Китайский
  • Тип:
    PDF
  • Размер:
    3.7 MB
  • Описание:
    P5K SE/EPU user’s manual(Traditional Chinese)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(134 страницы)

  • Языки:Китайский
  • Тип:
    PDF
  • Размер:
    3.63 MB
  • Описание:
    P5K SE/EPU user’s manual(Simplified Chinese)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(134 страницы)

  • Языки:Французский
  • Тип:
    PDF
  • Размер:
    3.35 MB
  • Описание:
    P5K SE/EPU user’s manual (French)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(134 страницы)

  • Языки:Китайский
  • Тип:
    PDF
  • Размер:
    8.57 MB
  • Описание:
    P5K SE/EPU user’s manual (Traditional Chinese)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(44 страницы)

  • Языки:Китайский, Молдавский
  • Тип:
    PDF
  • Размер:
    1.88 MB
  • Описание:
    Motherboard Installation Guide (Simplified Chinese)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(44 страницы)

  • Языки:Китайский, Молдавский
  • Тип:
    PDF
  • Размер:
    2.02 MB
  • Описание:
    Motherboard Installation Guide (Traditional Chinese)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(8 страниц)

  • Языки:Китайский, Молдавский
  • Тип:
    PDF
  • Размер:
    2.67 MB
  • Описание:
    Motherboard DIY Troubleshooting Guide (Traditional Chinese version)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(40 страниц)

  • Языки:Молдавский, Японский
  • Тип:
    PDF
  • Размер:
    1.73 MB
  • Описание:
    Motherboard Installation Guide (Japanese)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(40 страниц)

  • Языки:Молдавский, Французский
  • Тип:
    PDF
  • Размер:
    1.64 MB
  • Описание:
    Motherboard Installation Guide (French)

Просмотр

Preview

ASUS P5K SE/EPU инструкция по эксплуатации
(721 страница)

  • Языки:Молдавский
  • Тип:
    PDF
  • Размер:
    43.88 MB
  • Описание:
    Motherboard Installation Guide (Multiple Languages)

Просмотр

На NoDevice можно скачать инструкцию по эксплуатации для ASUS P5K SE/EPU. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации ASUS P5K SE/EPU. Инструкции по использованию помогут правильно настроить ASUS P5K SE/EPU, исправить ошибки и выявить неполадки.

E4039

Second Edition V2

June 2008

Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. («ASUS»).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL «AS IS» WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

ii

Loading…

P5K SE/EPUMotherboard

E4039

Second Edition V2

June 2008

Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing byASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

ii

Contents

Contents………………………………………………………………………………………….

iii

Notices…………………………………………………………………………………………..

vii

Safety information………………………………………………………………………….

viii

About this guide………………………………………………………………………………

ix

P5K SE/EPU specifications summary……………………………………………….

xi

Chapter 1:

Product introduction

1.1

Welcome!……………………………………………………………………………

1-1

1.2

Package contents……………………………………………………………….

1-1

1.3

Special features………………………………………………………………….

1-2

1.3.1

Product highlights……………………………………………………

1-2

1.3.2

ASUS AI Lifestyle features……………………………………….

1-4

1.3.3

ASUS Stylish features.…………………………………………….

1-5

1.3.4

ASUS Intelligent Overclocking features………………………

1-6

Chapter 2:

Hardware information

2.1

Before you proceed…………………………………………………………….

2-1

2.2

Motherboard overview………………………………………………………..

2-2

2.2.1

Placement direction…………………………………………………

2-2

2.2.2

Screw holes……………………………………………………………

2-2

2.2.3

Motherboard layout………………………………………………….

2-3

2.2.4

Layout contents.……………………………………………………..

2-4

2.3

Central Processing Unit (CPU)…………………………………………….

2-6

2.3.1

Installing the CPU……………………………………………………

2-7

2.3.2

Installing the CPU heatsink and fan…………………………..

2-9

2.3.3

Uninstalling the CPU heatsink and fan………………………

2-11

2.4

System memory………………………………………………………………..

2-13

2.4.1

Overview………………………………………………………………

2-13

2.4.2

Memory configurations.………………………………………….

2-14

2.4.3

Installing a DIMM…………………………………………………..

2-18

2.4.4

Removing a DIMM…………………………………………………

2-18

2.5

Expansion slots………………………………………………………………..

2-19

2.5.1

Installing an expansion card……………………………………

2-19

2.5.2

Configuring an expansion card………………………………..

2-19

2.5.3

Interrupt assignments…………………………………………….

2-20

2.5.4

PCI slots.……………………………………………………………..

2-21

iii

Contents

2.5.5

PCI Express x1 slots ……………………………………………..

2-21

2.5.6

PCI Express x16 slot . …………………………………………….

2-21

2.6

Jumpers

……………………………………………………………………………

2-22

2.7

Connectors……………………………………………………………………….

2-24

2.7.1 …………………………………………..

Rear panel connectors

2-24

2.7.2 ………………………………………………..

Internal connectors

2-26

Chapter 3:

Powering up

3.1

Starting up for the first time………………………………………………..

3-1

3.2

Turning off the computer…………………………………………………….

3-2

3.2.1

Using the OS shut down function.……………………………..

3-2

3.2.2

Using the dual function power switch.………………………..

3-2

Chapter 4:

BIOS setup

4.1

Managing and updating your BIOS………………………………………

4-1

4.1.1

ASUS Update utility…………………………………………………

4-1

4.1.2

Creating a bootable floppy disk.………………………………..

4-4

4.1.3

ASUS EZ Flash 2 utility.…………………………………………..

4-5

4.1.4

AFUDOS utility……………………………………………………….

4-6

4.1.5

ASUS CrashFree BIOS 3 utility…………………………………

4-8

4.2

BIOS setup program……………………………………………………………

4-9

4.2.1

BIOS menu screen.……………………………………………….

4-10

4.2.2

Menu bar……………………………………………………………..

4-10

4.2.3

Navigation keys.……………………………………………………

4-10

4.2.4

Menu items……………………………………………………………

4-11

4.2.5

Sub-menu items…………………………………………………….

4-11

4.2.6

Configuration fields…………………………………………………

4-11

4.2.7

Pop-up window………………………………………………………

4-11

4.2.8

Scroll bar………………………………………………………………

4-11

4.2.9

General help………………………………………………………….

4-11

4.3

Main menu………………………………………………………………………..

4-12

4.3.1

System Time…………………………………………………………

4-12

4.3.2

System Date…………………………………………………………

4-12

4.3.3

Legacy Diskette A………………………………………………….

4-12

4.3.4

SATA 1-4………………………………………………………………

4-13

4.3.5

SATAConfiguration………………………………………………..

4-14

4.3.6

System Information………………………………………………..

4-15

iv

Contents

4.4

Advanced menu………………………………………………………………..

4-16

4.4.1

Jumperfree Configuration……………………………………….

4-16

4.4.2

AI NET 2………………………………………………………………

4-19

4.4.3

USB Configuration…………………………………………………

4-20

4.4.4

CPU Configuration…………………………………………………

4-21

4.4.5

Chipset………………………………………………………………..

4-22

4.4.6

OnBoard Devices Configuration………………………………

4-23

4.4.7

PCI PnP……………………………………………………………….

4-24

4.5

Power menu……………………………………………………………………..

4-25

4.5.1

Suspend Mode……………………………………………………..

4-25

4.5.2

Repost Video on S3 Resume.…………………………………

4-25

4.5.3

ACPI Version.……………………………………………………….

4-25

4.5.4

ACPI APIC Support……………………………………………….

4-25

4.5.5

APM Configuration………………………………………………..

4-26

4.5.6

Hardware Monitor………………………………………………….

4-27

4.6

Boot menu………………………………………………………………………..

4-29

4.6.1

Boot Device Priority……………………………………………….

4-29

4.6.2

Boot Settings Configuration…………………………………….

4-30

4.6.3

Security………………………………………………………………..

4-31

4.7

Tools menu……………………………………………………………………….

4-33

4.7.1

ASUS EZ Flash 2………………………………………………….

4-33

4.7.2

ASUS O.C. Profile.………………………………………………..

4-34

4.8

Exit menu………………………………………………………………………….

4-35

Chapter 5:

Software support

5.1

Installing an operating system…………………………………………….

5-1

5.2

Support CD information………………………………………………………

5-1

5.2.1

Running the support CD…………………………………………..

5-1

5.2.2

Drivers menu.…………………………………………………………

5-2

5.2.3

Utilities menu………………………………………………………….

5-3

5.2.4

Manual menu………………………………………………………….

5-5

5.2.5

ASUS Contact information………………………………………..

5-5

5.2.6

Other information…………………………………………………….

5-6

5.3

Software information…………………………………………………………..

5-8

5.3.1

ASUS MyLogo2™…………………………………………………..

5-8

5.3.2

Audio configurations………………………………………………

5-10

Contents

5.3.3

ASUS PC Probe II.………………………………………………..

5-14

5.3.4

ASUS AI Suite………………………………………………………

5-20

5.3.5

ASUS EPU Utility — AI Gear 3+………………………………..

5-22

5.3.6

ASUS AI Nap………………………………………………………..

5-24

5.3.7

ASUS Q-Fan 2………………………………………………………

5-25

5.3.8

ASUS AI Booster.………………………………………………….

5-26

Appendix:

CPU features

A.1

Intel® EM64T……………………………………………………………………….

A-1

A.2

Enhanced Intel SpeedStep® Technology (EIST)…………………….

A-1

A.2.1

System requirements……………………………………………….

A-1

A.2.2

Using the EIST………………………………………………………..

A-2

A.3

Intel® Hyper-Threading Technology……………………………………..

A-3

vi

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

vii

Safety information

Electrical safety

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

Seek professional assistance before using an adpater or extension cord. These devices could interrupt the grounding circuit.

Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

Place the product on a stable surface.

If you encounter technical problems with the product, contact a qualified service technician or your retailer.

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Check local regulations for disposal of electronic products.

viii

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the switches, jumpers, and connectors on the motherboard.

Chapter 3: Powering up

This chapter describes the power up sequence and ways of shutting down the system.

Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

Chapter 5: Software support

This chapter describes the contents of the support CD that comes with the motherboard package.

Appendix: CPU features

The Appendix describes the CPU features and technologies that the motherboard supports.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

ix

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text

Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key>

Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or Return key.

<Key1>+<Key2>+<Key3> If you must press two or more keys simultaneously, the key names are connected with a plus sign (+).

Example: <Ctrl>+<Alt>+<D>

Command Means that you must type the command exactly as shown.

Example: At the DOS prompt, type the command line:

afudos /iP5KSE.ROM

P5K SE/EPU specifications summary

CPU

Chipset

System bus

Memory

Expansion slots

Storage

LAN

Audio

USB

AI Lifestyle Unique features

Other features

LGA775 socket for Intel® Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium® Extreme / Pentium® D / Pentium® 4 processors

Compatible with Intel® 05B/05A/06 processors Supports Intel® next-generation 45nm multi-core CPU

Intel® P35 / ICH9 with Intel® Fast Memory Access Technology

1600/1333/1066/800 MHz

Dual-channel memory architecture

— 4 x 240-pin DIMM sockets support unbuffered non-ECC DDR2 1200/1066/800/667MHz memory modules

— Supports up to 8 GB system memory

* Refer to www.asus.com or this user manual for the

Memory QVL (Qualified Vendors Lists).

1 x PCI Express™ x16 slot

3 x PCI Expressx1 slots

2 x PCI slots

Southbridge

— 4 x Serial ATA 3.0 Gb/s ports

Marvell® 88SE6111 PATA and SATA controller supports: — 1 x UltraDMA 133/100/66 for up to 2 PATA devices — 1 x External SATA 3.0 Gb/s port (SATA On-the-Go)

PCIe Gigabit LAN controller featuring AI NET2

Realtek® ALC883 8-channel High-DefinitionAudio CODEC

— Supports Jack-Sensing, Multi-Streaming — Coaxial S/PDIF out ports at back I/O

— ASUS Noise Filter

12 x USB 2.0 ports (6 at mid-board, 6 at back panel)

ASUS Power Saving Solution:

— ASUS EPU (Energy Processing Unit)

— ASUS AI Nap

— ASUS Q-Fan 2

ASUS Crystal Sound:

— ASUS Noise Filter

ASUS EZ DIY:

— ASUS Q-Connector

— ASUS O.C. Profile

— ASUS CrashFree BIOS 3

— ASUS EZ Flash 2

ASUS MyLogo2

(continued on the next page)

xi

P5K SE/EPU specifications summary

ASUS Exclusive Overclocking features

Rear panel connectors

Internal connectors

BIOS features

Manageability

Support CD contents

Form factor

Intelligent overclocking tools: — ASUS AI Booster utility

Precision Tweaker:

— vCore: Adjustable CPU voltage at 0.0125V increment

— vDIMM: 17-step DRAM voltage control SFS (Stepless Frequency Selection):

— FSB tuning from 200MHz to 800 MHz at 1MHz increment

— Memory tuning from 667MHz to 1333MHz for DDR2 — PCI-E frequency tuning from 100MHz to 150MHz at

1 MHz increment

Overclocking protection:

— ASUS C.P.R. (CPU Parameter Recall)

1 x PS/2 keyboard port

1 x External Serial ATA port

1 x Coaxial S/PDIF Out port

1 x LAN (RJ-45) port

6 x USB 2.0/1.1 ports

8-channel audio ports

3 x USB connectors support 6 additional USB ports

1 x Floppy disk drive connector

1 x IDE connector

4 x Serial ATA connectors

1 x CPU / 1 x Chassis / 1 x Power fan connectors 1 x COM connector

1 x S/PDIF Out header Chassis intrusion connector Front panel audio connector CD audio in connector 24-pin ATX power connector

4-pin ATX 12V power connector System panel connector (Q-Connector)

8 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM 2.0, SM BIOS 2.3, ACPI 2.0a, ASUS EZ Flash 2, ASUS CrashFree BIOS 3

WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE

Drivers

ASUS PC Probe II

ASUS Update

ASUS AI Suite

Anti-virus software (OEM version)

ATX form factor: 12 in x 7.6 in (30.5 cm x 19.3 cm)

*Specifications are subject to change without notice.

xii

This chapter describes the motherboard

1

features and the new technologies

it supports.

Chapter 1:

Product

introduction

1.1

Welcome!……………………………………………………………………………

1-1

1.2

Package contents……………………………………………………………….

1-1

1.3

Special features………………………………………………………………….

1-2

ASUS P5K SE/EPU

1.1Welcome!

Thank you for buying an ASUS® P5K SE/EPU motherboard!

The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

1.2Package contents

Check your motherboard package for the following items.

Motherboard

ASUS P5K SE/EPU

Cables

2 x Serial ATA signal cable

1 x Serial ATA power cable

1 x Ultra DMA 133/100/66 cable

1 x Floppy disk drive cable

Accessories

I/O shield

1 xASUS Q-Connector Kit (USB, system panel;

Retail version only)

Application CD

ASUS motherboard support CD

ASUS Superb Software Library CD

Documentation

User guide

If any of the above items is damaged or missing, contact your retailer.

1.3Special features

1.3.1Product highlights

Green ASUS

This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with theASUS vision of creating environment-friendly and recyclable products/packaging to safeguard consumers’ health while minimizing the impact on the environment.

Supports

Intel® Quad-core Processor Ready

This motherboard supports the latest Intel® Quad-core processors in the LGA775 package and Intel’s next-generation 45nm multi-core processors. It is excellent for multi-tasking, multi-media and enthusiastic gamers with 1600/1333/1066/800 MHz

FSB. Intel® Quad-core processor is one of the most powerful CPU in the world. See page 2­6 for details.

Intel® Core™2 Duo/ Intel® Core™2 Extreme CPU support

This motherboard supports the latest Intel® Core™2 processor in the LGA775 package and Intel’s next-generation 45nm multi-core processors. With the new Intel® Core™ microarchitecture technology and 1600/1333/1066/800 MHz FSB, the Intel® Core™2 is one of the most powerful and energy efficient CPUs in the world.

See page 2­6 for details.

Intel P35 Chipset

The Intel® P35 Express Chipset is the latest chipset designed to support the next generation 45nm CPU and up to 8GB of dual-channel DDR2 800/677 MHz

memory architecture. It also supports 1600/1333/1066/800 FSB (Front Side Bus), PCI Express x16 graphics and multi-core CPUs.

ASUS Super Memspeed Technology

To attain top performance, ASUS has managed to break through current FSB and DRAM ratio proportions by utilizing Super Memspeed Technology–the latest technology that provides even more precise overclocking options to unleash the true potential of DDR2 memory. The DDR2 Mode maximizes system performance by eliminating the bottleneck when overclocking both the CPU and memory– providing great performance for 3D graphics and other memory demanding applications. See page 2­13 for details.

1-2

Chapter 1: Product Introduction

Serial ATA 3.0 Gb/s technology and SATA-On-The-Go

This motherboard supports the next-generation hard drives based on the Serial

ATA(SATA) 3Gb/s storage specification, delivering enhanced scalability and doubling the bus bandwidth for high-speed data retrieval and saves. The external SATA port located at the back I/O provides smart setup and hot-plug functions. Easily backup photos, videos and other entertainment contents to external devices. See pages 2-25 and 2-28 for details.

S/PDIF digital sound ready

This motherboard provides convenient connectivity to external home theater audio systems via coaxial and optical S/PDIF-out (SONY-PHILIPS Digital Interface) jacks.It allows to transfer digital audio without converting to analog format and keeps the best signal quality. See pages 2-25 and 2-29 for details.

High Definition Audio

Enjoy high-end sound quality on your PC! The onboard 8-channel High Definition Audio CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature, and multi-streaming technology that simultaneously sends different audio streams to different destinations. You can now talk to your partners on the headphone while playing multi-channel network games. See pages 2-24 and 2-25 for details.

1.3.2 ASUS AI Lifestyle features

ASUS Power Saving Solution

ASUS Power Saving solution makes system more stable and enhances the overclocking capability.

ASUS EPU

TheASUS EPU utilizes innovative technology to digitally monitor and tune the CPU power supply with improved VR responses in heavy or light loadings. It automatically provides power for higher performance or improve

efficiency by 50% when the PC is running low intensity applications. Working together with AI Gear 3+, this can help you attain the best possible power efficiency and energy savings up to 80.23% to help save the environment.

See page 5-22 for details.

AI Nap

With AI Nap, the system can continue running at minimum power and noise when you are temporarily away. To wake the system and return to the OS environment, simply click the mouse or press a key. See page 5-24 for details.

Q-Fan 2

ASUS Q-Fan2 technology intelligently adjusts both CPU fan and chassis fan speedsaccordingtosystemloadingtoensurequiet,coolandefficientoperation.

See page 4-27,4-28 and 5-25 for details.

ASUS Crystal Sound

This feature can enhance speech-centric applications like Skype, online game, video conference and recording.

Noise Filter

This feature detects repetitive and stationary noises (non-voice signals) like computer fans, air conditioners, and other background noises then eliminates it in the incoming audio stream while recording.

1-4

Chapter 1: Product Introduction

ASUS EZ DIY

ASUS EZ DIY feature collection provides you easy ways to install computer components, update the BIOS or back up your favorite settings.

ASUS Q-Connector

ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel cables to the motherboard. This unique module eliminates the trouble of connecting the system panel cables one at a time and avoiding wrong cable connections. See page 2-35 for details.

ASUS O.C. Profile

The motherboard features theASUS O.C. Profile that allows users to conveniently store or load multiple BIOS settings. The BIOS settings can be stored in the CMOS or a separate file, giving users freedom to share and distribute their favorite settings. See page 4-34 for details.

ASUS CrashFree BIOS 3

The ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a USB flash disk containing the BIOS file. See page 4-8 for details.

ASUS EZ Flash 2

EZ Flash 2 is a user-friendly BIOS update utility. Simply press the predefined hotkey to launch the utility and update the BIOS without entering the OS. Update your BIOS easily without preparing a bootable diskette or using an

OS-based flash utility. See page 4-5 and 4-33 for details.

Smart Support CD

It provides a checklist to allow the user to see which drivers are already installed, as well as those that aren’t. When using ASUS PC Probe II, you can easily see the critical parts of the computer.

1.3.3ASUS Stylish features

ASUS MyLogo2™

This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen. See pages 5-8 and 5-9 for details.

1.3.4ASUS Intelligent Overclocking features

AI Booster

The ASUS AI Booster allows you to overclock the CPU speed in Windows environment without the hassle of booting the BIOS. See page 5-26 for details.

Precision Tweaker

This feature allows you to fine tune the CPU/memory voltage and gradually increase the memory Front Side Bus (FSB) and PCI Express frequency at 1MHz increment to achieve maximum system performance. See page 4-17 to 4-19 for details.

C.P.R. (CPU Parameter Recall)

The C.P.R. feature of the motherboard BIOS allows automatic re-setting to the BIOS default settings in case the system hangs due to overclocking. When the system hangs due to overclocking, C.P.R. eliminates the need to open the system chassis and clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically restores the CPU default setting for each parameter.

1-6

Chapter 1: Product Introduction

This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.

Chapter 2:

Hardware2 information

2.1

Before you proceed…………………………………………………………….

2-1

2.2

Motherboard overview………………………………………………………..

2-2

2.3

Central Processing Unit (CPU)…………………………………………….

2-6

2.4

System memory………………………………………………………………..

2-13

2.5

Expansion slots………………………………………………………………..

2-19

2.6

Jumpers……………………………………………………………………………

2-22

2.7

Connectors……………………………………………………………………….

2-24

ASUS P5K SE/EPU

2.1Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

Unplug the power cord from the wall socket before touching any component.

Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity.

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.

P5K SE/EPU

SB_PWR

ON

OFF

Standby

Powered

Power

Off

P5K SE/EPU Onboard LED

2.2Motherboard overview

Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.

2.2.1Placement direction

When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

2.2.2Screw holes

Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

Place this side towards the rear of the chassis

P5K SE/EPU

®

2-2

Chapter 2: Hardware information

2.2.3Motherboard layout

19.3cm (7.6in)

KB_USB56 PS2_USBPW

SPDIF_O1 ATX12V

LGA775

USB34

ESATA

LAN1_USB12

AUDIO

Intel®

P35

4-

SUBPW1 USBPW78

USB78

®

AttansIc

PCIEX16_1

L1

EPU CPU_FAN

DDR2 DIMM B1 (64 bit,240-pin module)

DDR2 DIMM B2 (64 bit,240-pin module)

P5K SE/EPU

_

DDR2 DIMM A1 (64 bit,240-pin module)

_

DDR2 DIMM A2 (64 bit,240-pin module)

_

_

EATXPWR

(12.0in)

30.5cm

PCIEX1_3

Marvell

PCI1

Intel®

88SE6111

ICH9

PCI2

FLOPPY

CD

CR2032 3V

SATA4

SATA3

CHASSIS

PCIEX1_1

Lithium Cell

ALC883

Super

CMOS Power

SATA2

SATA1

SPDIF_OUT

CLRTC

I/O

PWR_FAN

PCIEX1_2

SB_PWR

USBPW9-12

BIOS

CHA_FAN

AAFP

PRI_EIDE

COM1

USB1112 USB910

PANEL

Refer to 2.7 Connectors for more information about rear panel connectors and internal connectors.

2.2.4Layout contents

Slots

Page

1.

DDR2 DIMM slots

2-13

2.

PCI slots

2-21

3

PCI Express x1 slot

2-21

4.

PCI Express x16 slots

2-21

Jumper

Page

1.

Clear RTC RAM (3-pin CLRTC)

2-22

2.

Keyboard power (3-pin PS2_USBPW)

2-23

3.

USB device wake-up (3-pin USBPW1-4, USBPW5-8, USB9-12)

2-23

Rear panel connectors

Page

1.

PS/2 keyboard port (purple)

2-24

2.

LAN (RJ-45) port

2-24

3.

Center/Subwoofer port (orange)

2-24

4.

Rear Speaker Out port (black)

2-24

5.

Line In port (light blue)

2-24

6.

Line Out port (lime)

2-24

7.

Microphone port (pink)

2-24

8.

Side Speaker Out port (gray)

2-24

9.

USB 2.0 ports 1 and 2

2-24

10.

External SATA port

2-25

11.

USB 2.0 ports 3 and 4

2-25

12.

Coaxial S/PDIF Out port

2-25

13.

USB 2.0 ports 5 and 6

2-25

2-4

Chapter 2: Hardware information

Internal connectors

Page

1.

Floppy disk drive connector (34-1 pin FLOPPY)

2-26

2.

IDE connector (40-1 pin PRI_EIDE)

2-27

3.

ICH9 Serial ATA connectors (7-pin SATA1-4)

2-28

4.

Digital audio connector (4-1 pin SPDIF_OUT)

2-29

5.

USB connectors (10-1 pin USB78, USB910, USB1112)

2-30

6.

Optical drive audio connector (4-pin CD)

2-30

7.

CPU, chassis, and power fan connectors

2-31

(4-pin CPU FAN, 3-pin CHA_FAN, 3-pin PWR_FAN)

8.

Serial port connector (10-1 pin COM1)

2-31

9.

Chassis intrusion connector (4-1 pin CHASSIS)

2-32

10.

Front panel connector (10-1 pin AAFP)

2-32

11.

ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)

2-33

12.

System panel connector (20-8-pin PANEL)

2-34

System power LED (2-pin PLED)

Hard disk drive activity LED (2-pin IDE_LED)

System warning speaker (4-pin SPEAKER)

ATX power button/soft-off button (2-pin PWRSW)

Reset button (2-pin RESET)

ASUS Q-connector (system panel)

2-35

2.3Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA775 socket designed for the Intel® Core2 Quad / Core2 Extreme / Core2 Duo / Pentium® Extreme / Pentium® D / Pentium® 4 processors.

• Make sure that all power cables are unplugged before installing the CPU.

• Connect the chassis fan cable to the CHA_FAN1 connector to ensure system stability.

• Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.

Keep the cap after installing the motherboard. ASUS will process Return

MerchandiseAuthorization (RMA) requests only if the motherboard comes with the cap on the LGA775 socket.

The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/ incorrect removal of the PnP cap.

2-6

Chapter 2: Hardware information

2.3.1Installing the CPU

To install a CPU:

1.Locate the CPU socket on the motherboard.

P5K SE/EPU

P5K SE/EPU CPU Socket 775

Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left.

2.Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab.

Retention tab

A

PnP cap

Load lever

B

This side of the socket box

should face you.

To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.

3.Lift the load lever in the direction of the arrow to a 135º angle.

4.Lift the load plate with your thumb and forefinger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B).

Alignment key

5.Position the CPU over the socket, making sure that the gold triangle is on the bottom left corner of the socket then fit the socket alignment key into the CPU notch.

CPU notch

Gold triangle mark

The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU!

6.

Close the load plate (A), then

A

push the load lever (B) until it

snaps into the retention tab.

7.

If installing a dual-core CPU,

B

connect the chassis fan cable

to the CHA_FAN1 connector to

ensure system stability.

2-8

Chapter 2: Hardware information

2.3.2Installing the CPU heatsink and fan

The Intel® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.

• When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, make sure that you use only Intel® certified multi directional heatsink and fan.

Your Intel® LGA775 heatsink and fan assembly comes in a push-pin design and requires no tool to install.

If you purchased a separate CPU heatsink and fan assembly, make sure that you have properly applied Thermal Interface Material to the CPU heatsink or CPU before you install the heatsink and fan assembly.

Make sure that you have installed the motherboard to the chassis before you install the CPU fan and heatsink assembly.

To install the CPU heatsink and fan:

1.Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the motherboard.

Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan connector.

Motherboard hole

Narrow end

Fastener

of the groove

Make sure to orient each fastener with the narrow end of the groove pointing outward. (The photo shows the groove shaded for emphasis.)

2. Push down two fasteners at a time in

a diagonal sequence to secure the

B

heatsink and fan assembly in place.

A

A

B

B

B

A

A

3.Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.

P5K SE/EPU

CPU_FAN

GNDCPUCPUCPU

PWR FANIN FANPWM FAN

P5K SE/EPU CPU fan connector

Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.

2-10

Chapter 2: Hardware information

Asus P5K SE EPU User Manual

2.3.3Uninstalling the CPU heatsink and fan

To uninstall the CPU heatsink and fan:

1.Disconnect the CPU fan cable from the connector on the motherboard.

2.Rotate each fastener counterclockwise.

3.Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard.

4.Carefully remove the heatsink and fan assembly from the motherboard.

5.Rotate each fastener clockwise to ensure correct orientation when reinstalling.

The narrow end of the groove should point outward after resetting. (The photo shows the groove shaded for emphasis.)

Narrow end of the groove

Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation.

2-12

Chapter 2: Hardware information

2.4System memory

2.4.1Overview

The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets.

The figure illustrates the location of the DDR2 DIMM sockets:

P5K SE/EPU

DIMM A1 DIMM A2

DIMM B1 DIMM B2

P5K SE/EPU 240-pin DDR2 DIMM sockets

Channel

Sockets

Channel A

DIMM_A1 and DIMM_B1

Channel B

DIMM_A2 and DIMM_B2

2.4.2Memory configurations

You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non ECC DDR2 DIMMs into the DIMM sockets.

Recommended Memory Configurations

Mode

Sockets

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

Single-Channel

Populated

Populated

Dual-channel (1)

Populated

Populated

Dual-channel (2)

Populated

Populated

Populated

Populated

• You may install varying memory sizes in ChannelAand Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.Any excess memory from the higher-sized channel is then mapped for single-channel operation.

Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor.

If you install four 1 GB memory modules, the system may only recognize less than 3GB because the address space is reserved for other critical functions. This limitation appears on Windows® XP/Vista 32-bit operation system which does not support Physical Address Extension (PAE).

If you install Windows® XP/Vista 32-bit operation system, a total memory of less than 3GB is recommended.

This motherboard does not support memory modules made up of 128 Mb chips.

Notes on memory limitations

• Due to chipset limitation, this motherboard can only support up to

8 GB on the operating systems listed below. You may install a maximum of 2 GB DIMMs on each slot.

64-bit

Windows® XP Professional x64 Edition

Windows® Vista x64 Edition

Some old-version DDR2-800 DIMMs may not match Intel®’s On Die Termination (ODT) requirement and will automatically downgrade to run at DDR2-667. If this happens, contact your memory vendor to check the ODT value.

Due to chipset limitation, DDR2-800 with CL=4 will be downgraded to run at DDR2-667 by default setting. If you want to operate with lower latency, adjust the memory timing manually.

2-14

Chapter 2: Hardware information

P5K SE/EPU Motherboard Qualified Vendors Lists (QVL)

DDR2-1066 MHz capability

Size

Vendor

SS/

Part No.

DIMM support

DS

A*

B*

C*

512

OCZ

DS

OCZ2P10002GK / PC2 8000 / 1G EL Dual CH / Platinum

XTC

512

Crucial

SS

BL646AA1005.8FD / CL111R5W6-65183

512

Kingston

SS

KHX8500D2 / 512 / 9905315 — 028.AOOLF / 2297056 2.2V

1024

Kingston

DS

KHX8000D2 / 1G / 9905316 — 028.AOOLF / 2310576 2.2V

1024

CORSAIR

DS

CM2X1024-8500C5D 1024MB / XMS8505v1.2 /

0648081-1

1024

CORSAIR

DS

CM21024-8500-C5 / XMS8505v1.1 / 0616126-12

1024

OCZ

DS

OCZ2TA1000VX22GK / PC2 8000 / 1GB Dual CH / Titanium

Alpha VX2

1024

Kingston

DS

KHX8500D2K2 / 2GN / 9905316 — 071.AOOLF K2 /

2733866

2.2V

1024

CORSAIR

DS

CM2X1024 — 9136C5D / XMS9105V1.1

If you install a DDR2-1066 memory module whose SPD is DDR2-800, make sure that you set the DRAM Frequency item in BIOS to [DDR2-1066MHz]. See section 4.4.1 Jumperfree Configuration for details.

P5K SE/EPU Motherboard Qualified Vendors Lists (QVL)

DDR2-800 MHz capability

Size

Vendor

Chip No.

CL

Chip

SS/

Part No.

DIMM support

Brand

DS

A*

B*

C*

512MB

KINGSTON

K4T51083QC

5

SEC

SS

KVR800D2N5/512

1024MB

KINGSTON

Heat-Sink Package

4-4-4-12

N/A

DS

KHX6400D2LL/1G

1024MB

KINGSTON

Heat-Sink Package

4-4-4-12

N/A

SS

KHX6400D2LLK2/1GN

1024MB

KINGSTON

V59C1512804QBF25

N/A

N/A

DS

KVR800D2N5/1G

256MB

Qimonda

HYB18T512160BF-25F

5-5-5

INFINEON

SS

HYS64T32000HU-25F-B

512MB

Qimonda

HYB18T512800BF25F

5-5-5

N/A

SS

HYS64T64000HU-25F-B

1024MB

Qimonda

HYB18T512800BF25F

5-5-5

N/A

DS

HYS64T128020HU-25F-B

512MB

SAMSUNG

EDD339XX

5-5-5

N/A

SS

M378T6553CZ3-CE7

256MB

SAMSUNG

K4T51163QC-ZCE7

5-5-5

SAMSUNG

SS

M378T3354CZ3-CE7

512MB

SAMSUNG

ZCE7K4T51083QC

5-5-5

SEC

SS

M378T6553CZ3-CE7

512MB

Hynix

HY5PS12821CFP-S5

5-5-5

Hynix

SS

HYMP564U64CP8-S5

512MB

MICRON

D9GKX

N/A

N/A

SS

MT8HTF6464AY-80ED4

1024MB

MICRON

D9GKX

N/A

N/A

DS

MT16HTF12864AY-80ED4

1024MB

CORSAIR

Heat-Sink Package

4

N/A

DS

CM2X1024-6400C4

512MB

Crucial

Heat-Sink Package

4

N/A

SS

BL6464AA804.8FD

1024MB

Crucial

Heat-Sink Package

4

N/A

DS

BL12864AA804.16FD

1024MB

Crucial

Heat-Sink Package

4

N/A

DS

BL12864AL804.16FD3

1024MB

Crucial

Heat-Sink Package

4

N/A

DS

BL12864AA804.16FD3

512MB

Apacer

Heat-Sink Package

5

N/A

DS

AHU512E800C5K1C

1024MB

Apacer

Heat-Sink Package

5

N/A

DS

AHU01GE800C5K1C

512MB

A-DATA

AD29608A8A-25EG

N/A

N/A

SS

M2OAD6G3H3160G1E53

1024MB

A-DATA

AD26908A8A-25EG

N/A

N/A

DS

M2OAD6G3I4170I1E58

512MB

KINGMAX

KKA8FEIBF-HJK-25A

N/A

KINGMAX

SS

KLDC28F-A8KI5

1024MB

KINGMAX

KKA8FEIBF-HJK-25A

N/A

KINGMAX

DS

KLDD48F-ABKI5

512MB

Transcend

HY5PS12821CFP-S5

N/A

Hynix

SS

TS64MLQ64V8J

1024MB

Transcend

HY5PS12821CFP-S5

N/A

Hynix

DS

TS128MLQ64V8J

512MB

Super

Heat-Sink Package

N/A

N/A

SS

T800UA12C4

Talent

512MB

NANYA

NT5TU64M8BE-25C

5

NANYA

SS

NT512T64U880BY-25C

1024MB

NANYA

NT5TU64M8BE-25C

5

NANYA

DS

NT1GT64U8HB0BY-25C

512MB

PSC

A3R12E3HEF641B9A05

5

PSC

SS

AL6E8E63B8E1K

1024MB

PSC

A3R12E3HEF641B9A05

5

PSC

DS

AL7E8E63B-8E1K

2-16

Chapter 2: Hardware information

P5K SE/EPU Motherboard Qualified Vendors Lists (QVL)

DDR2-667MHz capability

Size

Vendor

Chip No.

CL

Chip

SS/

Part No.

DIMM support

Brand

DS

A*

B*

C*

512MB

SAMSUNG

ZCE6K4T51083QC

5

SEC

SS

M378T6553CZ0-CE6

512MB

SAMSUNG

K4T51083QC

5

SEC

SS

M378T6553CZ3-CE6

1024MB

SAMSUNG

ZCE6K4T51083QC

5

SEC

DS

M378T2953CZ3-CE6

256MB

SAMSUNG

K4T51163QE-ZCE6

5

SAMSUNG

SS

M378T3354EZ3-CE6

512MB

SAMSUNG

K4T51083QE

5

SAMSUNG

DS

M378T6553EZS-CE6

1024MB

SAMSUNG

K4T51083QE

5

SAMSUNG

DS

M378T2953EZ3-CE6

256MB

Hynix

HY5PS121621CFP-Y5

5

Hynix

SS

HYMP532U64CP6-Y5

1024MB

Hynix

HY5PS12821CFP-Y5

5

Hynix

DS

HYMP512U64CP8-Y5

256MB

CORSAIR

MIII00605

N/A

N/A

SS

VS256MB667D2

2048MB

NANYA

NT5TU128M8BJ-3C

5

NANYA

DS

NT2GT64U8HB0JY-3C

512MB

NANYA

NT5TU64M8BE-3C

5

NANYA

SS

NT512T64U88B0BY-3C

512MB

PSC

A3R12E3GEF637BLC5N

5

PSC

SS

AL6E8E63B-6E1K

1024MB

PSC

A3R12E3GEF637BLC5N

5

PSC

DS

AL7E8E63B-6E1K

• A*: Supports one module inserted in any slot as Single-channel memory configuration.

B*: Supports one pair of modules inserted into either the yellow slots or the black slots as one pair of Dual-channel memory configuration.

C*: Supports 4 modules inserted into both the yellow and black slots as two pairs of Dual-channel memory configuration.

Visit theASUS website for the latest DDR2-1066/800/667MHz QVL.

2.4.3Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components.

To install a DIMM:

2

1.

Unlock a DIMM socket by

3

DDR2 DIMM notch

pressing the retaining clips

outward.

1

2.

Align a DIMM on the socket

such that the notch on the DIMM

1

matches the break on the socket.

3.Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.

Unlocked retaining clip

• ADDR2 DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM.

The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR DIMMs to the DDR2 DIMM sockets.

2.4.4Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining 2 clips outward to unlock the DIMM.

Support the DIMM lightly with

1

your fingers when pressing the

retaining clips. The DIMM might

1

DDR2 DIMM notch

get damaged when it flips out with

extra force.

2.Remove the DIMM from the socket.

2-18

Chapter 2: Hardware information

2.5Expansion slots

In the future, you may need to install expansion cards. The following sub sections describe the slots and the expansion cards that they support.

Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

2.5.1Installing an expansion card

To install an expansion card:

1.Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card.

2.Remove the system unit cover (if your motherboard is already installed in a chassis).

3.Remove the bracket opposite the slot that you intend to use. Keep the screw for later use.

4.Align the card connector with the slot and press firmly until the card is completely seated on the slot.

5.Secure the card to the chassis with the screw you removed earlier.

6.Replace the system cover.

2.5.2Configuring an expansion card

After installing the expansion card, configure it by adjusting the software settings.

1.Turn on the system and change the necessary BIOS settings, if any. See Chapter 4 for information on BIOS setup.

2.Assign an IRQ to the card. Refer to the tables on the next page.

3.Install the software drivers for the expansion card.

When using PCI cards on shared slots, ensure that the drivers support “Share

IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Refer to the table on the next page for details.

Понравилась статья? Поделить с друзьями:
  • Бензогенератор hitachi e57 инструкция по эксплуатации
  • Замена радиатора печки ваз 2107 инжектор своими руками пошаговая инструкция
  • Как сделать подъемный кран из лего инструкция
  • Витамины ревит ундевит инструкция по применению цена
  • Затирка эпоксидная диамант инструкция по применению для плитки