Audigy 2 руководство

Срок обслуживания истек

Руководство пользователя по началу работы / инструкции по технике безопасности и нормативная информация

Драйвер

Дата выпуска:
9 Apr 10

Размер файла:
40.42 MB

Загрузка

Дата выпуска:
13 Jul 09

Размер файла:
37.62 MB

Загрузка

Дата выпуска:
16 Mar 07

Размер файла:
38.3 MB

Загрузка

Приложение

Дата выпуска:
2 Oct 12

Размер файла:
14.19 MB

Загрузка

Дата выпуска:
20 Mar 09

Размер файла:
8.12 MB

Загрузка

Quick Links

• Page 2
  Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd.
• Page 3
  Contents…

• Page 4: Table Of Contents

  Step 2: Install the Sound Blaster Audigy 2 card… 1-7 Step 3: Install the Joystick/MIDI bracket … 1-8 Step 4: Connect cables to Sound Blaster Audigy 2 card … 1-9 Step 5: Connect to power outlet …1-10 Connecting Related Peripherals… 1-11 Connecting Speaker Systems …

• Page 5
  Sound Blaster Audigy 2 Getting Started Demo … 3-2 Sound Blaster Audigy 2 Feature Showcase Demo… 3-2 SoundFont Showcase … 3-3 Introduction to the Sound Blaster Audigy 2 software suite … 3-3 Creative MediaSource Go! … 3-3 Creative MediaSource Go! Launcher… 3-4 Creative MediaSource Player…
• Page 6
  Creative Speaker Settings … 3-9 Creative Speaker Calibrator … 3-9 Creative MiniDisc Center … 3-9 Creative SoundFont Bank Manager …3-10 Creative Audio Stream Recorder 2 …3-10 Creative Wave Studio …3-11 Diagnostic and troubleshooting utilities…3-11 Creative Diagnostics …3-11 Creative Speaker Settings …3-12…
• Page 7
  Dolby Digital (AC-3) Decoding… A-3 Creative Multi Speaker Surround (CMSS) … A-3 SB1394 Compatibility… A-3 Connectivity … A-3 Sound Blaster Audigy 2 card … A-3 Audio Inputs … A-3 Audio Outputs … A-4 SB1394 Interfaces … A-4 Interfaces … A-4 Troubleshooting and FAQs Problems Installing Software …
• Page 8
  Problems in Windows XP … B-14 Problems with Digital Audio Devices … B-15…
• Page 9
  Introduction…

• Page 10: High Definition Digital Audio Entertainment

  Entertainment This User Manual (on CD) guides you through the installation and usage of Sound Blaster Audigy 2, which consists of the Sound Blaster Audigy 2 card and Joystick/ MIDI bracket*. Featuring 24-bit/192 kHz audio playback, Sound Blaster Audigy 2 delivers high-…

• Page 11: What Is Eax Advanced Hd

  Taking advantage of the enhanced processing capabilities of the Sound ADVANCED HD? Blaster Audigy 2 processor, EAX ADVANCED HD delivers a host of new features that achieve high definition audio for gaming and music enhancement. The all-new EAX ADVANCED HD Game Audio Library takes in-game audio and acoustic simulation to a whole new level.

• Page 12: Package Contents

  128 MB RAM for Windows 2000 SP2 and Windows XP ❑ 600 MB of free hard disk space ❑ Available PCI 2.1 compliant slot for the Sound Blaster Audigy 2 card ❑ Available adjacent slot for the Joystick/MIDI bracket* ❑ Headphones or amplified speakers (available separately) ❑…

• Page 13: Sb1394 Applications, Games Or Dvd Viewing

  Blaster Audigy 2 and demonstrates the card’s capabilities. More Help View the contents of the Sound Blaster Audigy 2 Installation CD for additional libraries and other software. Visit the Sound Blaster news and products. The site also includes information on making purchases, technical help, and the latest driver updates.

• Page 14: Document Conventions

  Document The following typographical conventions are used throughout this manual: Conventions The notepad icon indicates information that is of particular importance and should be considered before continuing. The alarm clock designates a caution or warning that can help you avoid situations involving risk. The warning sign indicates that failure to adhere to directions may result in bodily harm or life-threatening situations.

• Page 15: Installing Hardware

  Installing Hardware This chapter tells you how to install the Sound Blaster Audigy 2 hardware.

• Page 16: What You Need

  Before you begin installation, be sure that you have these: What You Need In addition, you will also need an available PCI slot and another adjacent available slot on your computer. Sound Blaster Audigy 2 card Digital CD audio cable* Joystick/MIDI bracket* Phillips-head screwdriver (not included) *Available on some models of the Sound Blaster Audigy 2 card.

• Page 17
  Rear Out and Rear Center Out jacks are used simultaneously for 6.1 channel speaker systems. Click any circled number in the diagram for a description of the item. Figure 1-1: Jacks, connectors and ports on the Sound Blaster Audigy 2 card. Installing Hardware…
• Page 18
  Click here or on any Number description in the table to return to the main diagram. Table 1: Description of Jacks, Connectors and Ports. Description SB1394 port (SB1394) Connects to an IEEE1394 compatible external device (such as a digital video camcorder, digital still camera, printer or scanner). Line Out 3 jack (LIN_OUT3) Connects to Center, Subwoofer and Rear Center Out of powered analog speakers or an external amplifier for audio output.
• Page 19
  Connects to internal audio sources such as TV Tuner, MPEG, or other similar cards. Internal SB1394 port* Connects to the SB1394 connector on the Audigy 2 Drive. CD SPDIF connector (CD_SPDIF) Connects to the SPDIF (Digital Audio) output (where available) on a CD-ROM or DVD-ROM drive using the Digital CD audio cable provided.

• Page 20: Your Joystick/Midi Bracket

  The Joystick/MIDI bracket* is used to attach a joystick or MIDI device: Your Joystick/ MIDI Bracket *Available with some models of the Sound Blaster Audigy 2 card. Joystick/MIDI connector Connects to a joystick or a MIDI device. Figure 1-2: Connector on the Joystick/MIDI bracket.

• Page 21: Installation Steps

  Installation Steps Step 1: Prepare your 1. Turn off your computer and all peripheral devices. 2. Touch a metal plate on your computer to ground yourself and to discharge any computer static electricity, and then unplug the power cord from the wall outlet. 3.

• Page 22: Step 2: Install The Sound Blaster Audigy 2 Card

  Step 2: Install the 1. Align the Sound Blaster Audigy 2 card with the PCI slot and press the card gently but firmly into the slot as shown in Figure 1-4. Sound Blaster Audigy 2 card Do not force the audio card into the slot.

• Page 23: Step 3: Install The Joystick/Midi Bracket

  Step 3: Install the 1. If you are installing a joystick or MIDI device (optional), secure the Joystick/MIDI bracket* to the slot next to the Sound Blaster Audigy 2 card with the second Joystick/MIDI screw. bracket You may also connect all the…

• Page 24: Step 4: Connect Cables To Sound Blaster Audigy 2 Card

  Digital CD audio cable (included with some models) from the Digital Audio connector on your CD-ROM/DVD-ROM drive to the CD_SPDIF connector on the Sound Blaster Audigy 2 card as shown in Figure 1-6. Figure 1-6: Connecting analog/digital audio cables to CD-ROM/DVD-ROM drives.

• Page 25: Step 5: Connect To Power Outlet

  2. Plug the power cord back into the wall outlet, and turn on the computer. power outlet To connect your Sound Blaster Audigy 2 card to other devices, see “Connecting Related Peripherals” on page 1-11. To install drivers and software, refer to “Installing Drivers and Applications” on page 2-1.

• Page 26: Connecting Related Peripherals

  Sound Blaster Audigy 2 will give you endless hours of listening pleasure. Figure 1-7 Connecting shows you how to connect related peripherals to your Sound Blaster Audigy 2 to Related optimize your enjoyment. Peripherals Use the AD_EXT cable with the Audigy 2 Drive ONLY. Do…

• Page 27
  Table 2: Description of Connectors and Devices. Description Digital Out jack Connects to digital speakers, for example, Creative Inspire Digital Speakers and MiniDisc or DAT via minijack-to-DIN cable. Line in Connects to a cassette or CD player, synthesizer, etc.
• Page 28
  Number *Available separately. **Available on some models of the Sound Blaster Audigy 2 card. Click here or on any description in the table to return to the main diagram. Table 2: Description of Connectors and Devices. Description Analog CD audio cable* (left) and Digital CD audio cable** (right) CD-ROM/DVD-ROM drive Installing Hardware…

• Page 29: Connecting Speaker Systems

  If you have a 5.1 channel speaker system, you can upmix your stereo sources (such Connecting as CD Audio, MP3, WMA, MIDI, and Wave) to 6.1 channels by using Creative Multi- Speaker Systems Speaker Surround (CMSS) technology. To upmix, you need to enable the CMSS feature in Creative EAX Console.

• Page 30: Connecting External Consumer Devices

  Audio/Video-to-RCA cable, connect the white RCA jack to the Center input and the red RCA jack to the Subwoofer input. Figure 1-9: Connecting external consumer devices to the Sound Blaster Audigy 2 card. Sound Blaster Audigy 2 card Installing Hardware…

• Page 31
  Line Out 1(top) Line Out 2 (middle) Line Out 3 (bottom) AD_EXT Connects to Audigy 2 Drive (upgrade option) 3.5 mm (stereo)-to-RCA plug: for 2-channel output, such as, Front Left and Right channels 3.5 mm (stereo) Audio/Video-to-RCA plug: for Center,…

• Page 32: Positioning Your Speakers

  If you are using six speakers, Positioning Your place them to form a circle Speakers around you (as in Figure 1-10) and angled toward you. Make sure that the computer monitor is not blocking the path of your front speakers. You may want to adjust the relative positions of Good loudspeaker placement can enhance your movie…

• Page 33: Installing Software

  Installing Software This chapter tells you how to install the Sound Blaster Audigy 2 software.

• Page 34: Installing Drivers And Applications

  You need to install device drivers and applications prior to using your Sound Blaster Installing Drivers Audigy 2. To install these drivers and the selected software applications, use the and Applications following instructions. The instructions are applicable to all supported Windows operating systems.

• Page 35: Sound Blaster Audigy 2 Feature Showcase Demo

  1. Insert the Sound Blaster Audigy 2 Feature Showcase Demo CD into your CD-ROM Sound Blaster drive. Audigy 2 Feature If the drive supports Windows AutoPlay mode, the CD starts running automatically. If not, you need to enable your CD-ROM drive’s auto-insert Showcase Demo notification feature.

• Page 36: Uninstalling All Audio Drivers And Applications

  2. Double-click the Add/Remove Programs icon. 3. Click the Install/Uninstall tab (or Change or Remove Programs button). 4. Select the Sound Blaster Audigy 2 entry, and then click the Add/Remove (or Change/Remove) button. 5. In the InstallShield Wizard dialog box, click the Remove button, and then click the Next button.

• Page 37: Installing/Uninstalling Selected Audio Drivers Or Applications

  You may now install existing or updated Sound Blaster Audigy 2 device drivers or applications. For more information, see “Installing Drivers and Applications” on page 2-1. Installing/ The above instructions help you to install or uninstall all device drivers or applications.

• Page 38: Updating Windows 2000 (Service Pack 2)

  5. In the InstallShield Wizard dialog box, click the Custom Uninstallation button, and then click the Next button. 6. Click the check box of the application that you want to uninstall to select it. 7. Click the Next button. 8. Restart your computer when prompted. Windows 2000 now provides better support for AC-3 SPDIF output (non-PCM Updating through waveOut) for software DVD viewing.

• Page 39: Using Audigy 2 Software

  Using Audigy 2 Software Find out how the software accompanying your audio card can be used to control and customize the card’s features for best performance.

• Page 40: Creative Sound Blaster Audigy 2 Applications

  Creative Sound advanced features of your audio card. We recommend that you familiarize yourself Blaster Audigy 2 with their functions in order to make full use of Sound Blaster Audigy 2’s rich features. Applications Demos: Providing an overview of Sound Blaster Audigy 2’s features ❑…

• Page 41: Demos

  Note: The Sound Blaster Audigy 2 Feature Showcase Demo can be installed using the separate Demo CD in your package. This demo will run only if a Sound Blaster Audigy 2 card is installed because the software utilizes the card’s hardware capabilities for the demonstrations.

• Page 42: Soundfont Showcase

  For more information and usage details on SoundFont Showcase, refer to its online Help. This section walks you through the main suite of the Sound Blaster Audigy 2 Introduction to software that enables you to make full use of Sound Blaster Audigy 2’s versatile the Sound and powerful features.

• Page 43: Creative Mediasource Go! Launcher

  Unlike other media players, Creative MediaSource MediaSource Player Player is specially designed to access the power of your Sound Blaster Audigy 2 card. With it, you can: ❑ play back music and multimedia files: MP3, WAV, WMA, NVF, MLP, Video CD, etc ❑…

• Page 44: Creative Mediasource Organizer

  For extra convenience, you can switch between Creative MediaSource Organizer and Creative MediaSource Player with just a click of the mouse. For more information and usage details on Creative MediaSource Player, refer to its Creative Managing a huge collection of audio CDs and MP3 files can be a headache. With…

• Page 45: Extracting And Converting Songs

  CDs into smaller 4 to 5 MB MP3 files. Creative MediaSource Organizer’s built-in Rip Now module lets you easily extract tracks from audio CDs, then convert them to MP3 and WMA formats at high resolution bit rates of 320 Kbps and 160 Kbps, respectively.

• Page 46: Creative Eax Console

  Creative EAX EAX Console allows you to configure the Audigy 2 processor’s effects engine. EAX ADVANCED HD promises to deliver sounds that are so life-like, you can almost Console see them! It is the computer industry’s first system to recreate and deliver real- world, interactive audio experiences in games, music, and other audio applications.

• Page 47: Cmss 3D: Simulating Surround Sound

  With the Time Scaling feature, Sound Blaster Audigy 2 users can maintain the pitch of a song while varying the playback speed. For more information and usage details on EAX Console, refer to the Creative EAX online Help.

• Page 48: Creative Surround Mixer

  Creative Surround Use Creative Surround Mixer to select the device you wish to listen to or record from. It operates in two possible modes. Click the Basic Mode or Advanced Mode button Mixer to switch between the two modes: In Basic mode, you can: ❑…

• Page 49: Creative Soundfont Bank Manager

  ❑ insert a preset period of silence automatically between each track ❑ play back your personal album and record it to your MD recorder For more information and usage details on Creative MiniDisc Center, refer to its online Creative SoundFont You can use Creative SoundFont Bank Manager to easily switch between multiple SoundFont banks for performances.

• Page 50: Creative Wave Studio

  Diagnostic and troubleshooting utilities Creative Diagnostics Use Creative Diagnostics to quickly test your audio card’s Wave, MIDI or CD Audio playback capability, recording function and speaker output. For more information and usage details on Creative Diagnostics, refer to its Help.

• Page 51: Creative Speaker Settings

  Creative Speaker This is the main application to use for managing your speakers and troubleshooting problems related to speaker configurations. See “Creative Speaker Settings” on Settings page 3-9. Using Audigy 2 Software 3-12…

• Page 52: A General Specifications

  General Specifications This section displays the specifications of your Sound Blaster Audigy 2 card and Joystick/MIDI bracket.

• Page 53: Features

  General Specifications This section displays the specifications of your Sound Blaster Audigy 2 card and Joystick/MIDI bracket*. Features *Available with some models of the Sound Blaster Audigy 2 card. ❑ PCI Specification Version 2.1 compliant PCI Bus Mastering ❑ Bus mastering reduces latency and speeds up system performance ❑…

• Page 54: Professional Digital Audio Processing

  ❑ 32-bit mixing of all digital sources within Audigy 2’s Digital Mixer ❑ 24-bit Analog-to-Digital conversion of analog inputs at 96 kHz sample rate ❑ 24-bit Digital-to-Analog conversion of digital sources at 96 kHz to analog 5.1 speaker output ❑ 24-bit Digital-to-Analog conversion of stereo digital sources at 192 kHz to stereo output ❑…

• Page 55: Dolby Digital (Ac-3) Decoding

  ❑ Supplies up to 3 watts to IEEE 1394 compatible devices Connectivity Sound Blaster Audigy 2 card ❑ One line-level analog Line input via stereo jack on rear bracket Audio Inputs ❑ One mono Microphone analog input via stereo jack on rear bracket ❑…

• Page 56: Audio Outputs

  IEEE 1394 hard disk and CD- RW drive to this port unless it is self-powered. ❑ AD_EXT 2 x 20 pin header for connection to Audigy 2 Drive Interfaces ❑ JOYSTICK 2 x 8 pin header* for connection to the Joystick/MIDI connector…

• Page 57: B Troubleshooting And Faqs

  Troubleshooting and FAQs This section provides solutions to problems you may encounter during installation or normal use.

• Page 58: Problems Installing Software

  Troubleshooting and FAQs This appendix provides solutions to problems you may encounter during installation or normal use. The installation does not start automatically after the Sound Blaster Audigy Problems 2 Installation CD is inserted. Installing The AutoPlay feature in your Windows system may not be enabled. Software To start the installation program through the My Computer shortcut menu: 1.

• Page 59: Problems With Sound

  ❑ In the Speaker Selection tab of Creative Speaker Settings, the Headphones option is selected in the Speaker/Headphone Selection box. ❑ In the Basic tab of Creative Surround Mixer, the recording source selected is “What U Hear”. Individual analog recording sources are not displayed in Creative Surround Mixer.

• Page 60
  Creative Surround Mixer.” on page B-2. To record an individual analog source: ❑ In the Record panel of the Basic tab in Creative Surround Mixer, make sure the recording source selected is Analog Mix (Line/CD/TAD/Aux/PC). ❑ In the Source panel, mute the analog sources that you do not want to record by clicking the Speaker button to change it to a button with a red cross sign on it.
• Page 61
  ❑ There is no hardware conflict between the card and a peripheral device. See “Resolving I/O Conflicts” on page B-11. ❑ The Speaker selection in Creative Speaker Settings corresponds to your speaker or headphone configuration. No audio output when playing audio CDs or DOS games that require a CD- ROM.
• Page 62
  Windows Volume Control application) is at the opposite end compared to the position to which you have panned the source in the Basic tab of Creative Surround Mixer. For example, the CD Audio balance in Windows Volume Control is on the left but in Creative Surround Mixer you have panned the CD Audio to the right.

• Page 63: Problems With File Transfers On Some Via Chipset Motherboards

  After you install the Audigy 2 card on a VIA chipset motherboard, you may have Problems with the slight chance of seeing one of the following: File Transfers on Some VIA When transferring large amounts of data, the computer stops responding (‘hangs’) or restarts itself, OR…

• Page 64: Insufficient Soundfont Cache

  • obtaining the most current BIOS for your motherboard from the manufacturer’s web site*. *Content in these web sites is controlled by other companies. Creative bears no responsibility for information or downloads obtained from them. This information is provided only as a convenience to you.

• Page 65: Problems With Joystick

  2. In the Control Panel window, double-click the System icon. 3. In the System Properties dialog box, click the Device Manager tab. 4. Double-click Sound, Video And Game Controllers, and then select Creative Audigy 2 Gameport (Creative Game Port for Windows 2000).

• Page 66: Problems With Multiple Audio Devices

  Operating multiple audio devices in your computer may introduce usability issues. Alternatively, during the installation of your Sound Blaster Audigy 2 card, do the following: ❑ If your computer detects an installed Sound Blaster Live! Series or Sound Blaster PCI512 audio card, a message box recommending that you completely uninstall and remove the older audio device will appear.

• Page 67: Problems With Sound Blaster Live! Series Or Sound Blaster Pci512 Card

  2. In the Control Panel window, double-click the System icon. 3. In the System Properties dialog box, click the Device Manager tab. 4. Double-click Sound, Video And Game Controllers, and then select Creative Sound Blaster Live! Series or Creative Sound Blaster PCI512.

• Page 68: Resolving I/O Conflicts

  • Clear the check box to disable it. If you have a Disable In This Hardware Profile check box: • Make sure that the check box is selected to disable it. 7. Click OK to restart Windows and for the change to take effect. When the Sound Blaster Live! series is disabled, the entry in Device Manager has a red cross.

• Page 69: Problems With Encore Dvd Player

  1. In the Windows system tray, right-click the Disc Detector icon, and then click Properties. 2. On the General tabbed page of the Creative Disc Detector dialog box, make sure that the Enable Disc Detector check box is selected. 3. Click the Players tab.

• Page 70: Problems With Dv Driver For Windows 98 Se/2000/Me/Xp

  To solve this problem: 1. Turn on your DV camcorder. 2. Insert the Sound Blaster Audigy 2 Installation CD into your CD-ROM drive. Exit from the welcome screen. 3. Using Windows Explorer, locate the 1394 folder in the CD-ROM, and run the DVConnect 240.exe file.

• Page 71
  You may see the message when you install hardware drivers from companies other than Creative. If you do, you may choose to click the Continue Anyway button. Device drivers not signed by Microsoft may be used in Windows XP, and need not impair or destabilize your computer.
• Page 72
  The choices available are 48 kHz and 96 kHz. To solve this problem: 1. In Creative MediaSource Go! Launcher, click the Product Settings tab. 2. Double-click the Device Controls icon. 3. Click the Sampling Rate tab.
• Page 73
  11.When prompted to restart your computer, click the Yes button. 12.Repeat steps 4-11 if you have other drives, for example, other hard disk drives, CD-ROM, CD-RW, and DVD-ROM drives. In step 4, double-click the respective drive icon. For Windows 2000 and Windows XP: 1.

High Definition

Digital Audio

Entertainment

*Available with some models of the Sound Blaster Audigy 2 card.

MLP (Meridian Lossless Packing), the method of audio data compression used in DVDAudio, reduces file size without removing any of the information that was contained in the original recording. The listening audience will hear the audio as it was intended in the original recording. Other packing methodologies that remove data as part of the compression are referred to as “Lossy Compression”.

Thank you for purchasing Sound Blaster Audigy 2, the next generation Creative audio product with exciting new features and enhanced audio processing architecture.

This User Manual (on CD) guides you through the installation and usage of Sound Blaster Audigy 2. Sound Blaster Audigy 2 consists of the Sound Blaster Audigy 2 card and Joystick/MIDI bracket*.

Featuring 24-bit/192 kHz audio playback, Sound Blaster Audigy 2 delivers high-definition sound of astounding quality and 24-bit/96 kHz audio recording capability from all Line Ins and SPDIF In. Sound Blaster Audigy 2 supports surround sound audio on your computer and has output capabilities for 6.1 Dolby Digital Surround EX.

As a THX® -Certified product, Sound Blaster Audigy 2 has passed some of the most stringent and rigorous audio quality and performance tests in existence. THX is renowned in the entertainment industry for its knowledge and expertise of audio-visual systems, and its certification programs are designed to ensure that products bearing the THX logo will each deliver an excellent media experience.

The Sound Blaster Audigy 2 card, with its Audigy 2 processor, enables awesome EAX® ADVANCED HDTM technologies for your gaming and music listening experience. The SB1394TM/FireWire® port provides easy high-speed connectivity to NOMAD® portable digital audio players, external CD-RW drives, and other IEEE 1394 compatible devices like DV camcorders, printers, scanners, and digital still cameras.

Combine Sound Blaster Audigy 2 with our rich software package for hours of endless fun. Included in your Sound Blaster Audigy 2 Installation and Applications CD are the latest generation drivers and software for you to enjoy DVD-Audio entertainment with native MLP (Meridian Lossless Packing) support, and to create EAX-enhanced MP3 songs, which you can share with your friends over the Internet.

EAX ADVANCED HD brings a new level of performance, power, and flexibility to PC audio. Taking advantage of the enhanced processing capabilities of the Sound Blaster Audigy 2 processor, EAX ADVANCED HD delivers a host of new features that achieve high definition audio for gaming and music enhancement.

The all-new EAX ADVANCED HD Game Audio Library takes in-game audio and acoustic simulation to a whole new level. These innovative technologies bring tremendous realism and total audio immersion for PC gaming:

New Multi-EnvironmentTM technology renders up to 4 simultaneous audio environments in real time.

Environment PanningTM makes it easy for gamers to track with three-dimensional precision, the location and movement of sounds that usually represent enemies or team mates. This gives Sound Blaster Audigy 2 gamers a better advantage as they are more «attuned» to the game scenario.

Environment ReflectionsTM offers localization of early reflections and echoes.

Environment FilteringTM accurately simulates the propagation of sound in both open and closed environments.

Environment MorphingTM allows for seamless transition from one environment to the next.

EAX ADVANCED HD Music Technologies also assures sonic superiority.

Audio Clean-Up enables the removal of unwanted noise in a digital audio file.

Time Scaling speeds up and slows down music with no distortion.

EAX ADVANCED HD music effects, developed especially for music listening, further enhance playback of songs.

EAX ADVANCED HD offers dramatically increased 3D audio performance and functionality. Delivering superior audio fidelity and sophisticated reverb effects, this unsurpassed digital entertainment experience is available only from the Sound Blaster Audigy 2 family of products.

Package Contents

*Available with some models of the Sound Blaster Audigy 2 card.

The following items are included with the Sound Blaster Audigy 2 package:

Sound Blaster Audigy 2 card

Joystick/MIDI bracket*

Digital CD audio cable*

Sound Blaster Audigy 2 Installation and Applications CD

Quick Start Leaflet*

User Manual (on CD)*

Sound Blaster Audigy 2 Feature Showcase Demo CD

Creative DVD-Audio Samplter Disc

Warranty (printed or on CD)*

Technical Support (printed or on CD)*

System

Requirements

Sound Blaster Audigy 2 card

Genuine Intel® Pentium® II 350 MHz, AMD® K6 450 MHz or faster processor

Intel, AMD or 100%-Intel compatible motherboard chipset

Windows® 98 Second Edition (SE), Windows Millennium Edition (Me), Windows 2000 Service Pack 2 (SP2) or Windows XP

64 MB RAM for Windows 98 SE and Windows Me 128 MB RAM for Windows 2000 SP2 and Windows XP

600 MB of free hard disk space

Available PCI 2.1 compliant slot for the Sound Blaster Audigy 2 card

Available adjacent slot for the Joystick/MIDI bracket*

Headphones or amplified speakers (available separately)

CD-ROM drive installed

SB1394/FireWire applications, games or DVD viewing

Minimum 256 MB RAM recommended for Windows 2000 SP3 and Windows XP SP1 users for games and DV capture and editing.

Internet Multimedia and

Entertainment

Genuine Intel Pentium II 350 MHz or AMD 450 MHz processor for SB1394/FireWire applications or games

SB1394/FireWire: Minimum 128 MB RAM for digital video (DV) capture and editing recommended, Ultra DMA hard disk with 1 GB workspace (ATA-100, 7,200 rpm type and 6 GB recommended) for DV applications

Games: At least 128 MB RAM recommended, 3D graphics accelerator with at least 8 MB of texture RAM, available 300–500 MB of free hard disk space

DVD: At least second generation DVD-ROM drive with these recommended soft-DVD players: InterVideo’s WinDVD 2000 or CyberLink’s PowerDVD 3.0 or later

DVD-Audio: Requires genuine Intel Pentium III or AMD AthlonTM 1 GHz or faster, 256 MB for Windows 2000 SP3 and Windows XP SP1, and a second generation DVD-ROM drive 6X or higher.

Internet Radio: Requires at least a 56 kbps modem and an active Internet connection to run the application.

Other applications may have higher system requirements or may require a microphone. Refer to the application’s online Help documentation for details.

Getting More

Information

More Help

Technical Support

Refer to the Sound Blaster Audigy 2 Getting Started Demo and the various online Help files for detailed information on Creative applications. The Sound Blaster Audigy 2 Feature Showcase Demo gives you an interactive introduction to Sound Blaster Audigy 2 and demonstrates the card’s capabilities.

View the contents of the Sound Blaster Audigy 2 Installation and Applications CD for additional libraries and other software. Visit the www.soundblaster.com site for the latest Sound Blaster news and products. The site also includes information on making purchases, technical help, and the latest driver updates.

Visit www.soundblaster.com/support/faq for general help.

In addition, you will also need an available PCI slot and another adjacent available slot on your computer.

Sound Blaster Audigy 2 card

Digital CD audio cable*

Joystick/MIDI bracket*

Phillips-head screwdriver (not included)

Your Sound

Blaster Audigy 2

Card

In Analog mode, the Line Out, Rear Out and Rear Center Out jacks are used simultaneously for 6.1 channel speaker systems.

Click any circled number in the diagram for a description of the item.

Your audio card has these jacks and connectors to enable the attachment of a wide variety of devices:

Figure 1-1: Jacks, connectors and ports on the

Sound Blaster Audigy 2 card.

Click here or on any description in the table to return to the main diagram.

*Available with some models of the Sound Blaster Audigy 2 card.

Your Joystick/

MIDI Bracket

Joystick/MIDI connector

Connects to a joystick or a MIDI device.

Installation Steps

Step 1: Prepare your computer

Turn off the main power supply and disconnect your computer’s power cord. Systems using an ATX power supply unit with soft power off may still be powering the PCI slot. This can damage your audio card when it is inserted into the slot.

Remove any existing audio card or disable the onboard audio chipset. For more information, see “Problems with Multiple Audio Devices” on page B-9.

1.Turn off your computer and all peripheral devices.

2.Touch a metal plate on your computer to ground yourself and to discharge any static electricity, and then unplug the power cord from the wall outlet.

3.Remove the computer cover.

4.Remove the metal brackets from two adjacent unused PCI slots as shown in Figure 1-3. Put the screws aside for use later.

A

B

Figure 1-3: Removing metal plates

Step 2: Install the Sound Blaster Audigy 2 card

Do not force the audio card into the slot. Make sure that the gold finger PCI connector on the Sound Blaster Audigy 2 card is aligned with the PCI bus connector on the motherboard before you insert the card into the PCI expansion slot.

If it does not fit properly, gently remove it and try again.

1.Align the Sound Blaster Audigy 2 card with the PCI slot and press the card gently but firmly into the slot as shown in Figure 1-4.

2

1

You may also connect all the cables to the Sound Blaster Audigy 2 card first before securing the card and Joystick/ MIDI bracket in place.

*Available with some models of the Sound Blaster Audigy 2 card.

Do not force any cable into a connector. This can cause permanent damage to your hardware.

Joystick/MIDI bracket

Joystick/MIDI cable

Figure 1-5: Securing the audio card to the expansion slot.

2.Connect the Joystick/MIDI cable* to the Joystick/MIDI connector on the Sound Blaster Audigy 2 card as shown in Figure 1-5.