Bobcat s650 руководство по ремонту

• 70-80-1 S650 Service Manual CYLINDER HEAD Glow Plugs — Testing Figure 70-80-1 Disconnect the glow plug nuts (Item 1), remove glow plug connecting strap (Item 2) and glow plugs (Item 3) [Figure 70-80-1]. Installation: Tighten the glow plug to 7,7 — 9,3 N•m (5.7 — 6.8 ft-lb) torque. Figure 70-80-2 Touch one probe to the end of the glow plug (Item 1) and the other probe to the body of glow plug (Item 2) [Figure 70-80-2]. Use an ohmmeter to check the glow plugs.The resistance sh

• 50-20-2 S650 Service Manual OPERATOR CAB (CONT’D) Gas Spring Bracket Disassembly And Assembly Figure 50-20-4 Remove the clevis (Item 1) from both ends, and the outer housing (Item 2) from the gas spring (Item 3) [Figure 50- 20-4]. Installation: Apply a small amount of thread-locker on the threads of the gas spring rod before installing the clevis (Item 1) [Figure 50-20-4]. WARNING AVOID INJURY Cylinders for raising and lowering operator

• 30-80-1 S650 Service Manual DRAIN MANIFOLD Description The drain manifold is an external assembly in the drain circuit that returns the hydraulic oil to the reservoir. Drain Manifold Removal And Installation IMPORTANT When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. I-2003-0888 Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-120-2.) Figure 30-80-1 Rem

• 60-110-3 S650 Service Manual SEAT BAR SENSOR (CONT’D) Removal And Installation Remove the seat bar from the loader. (See Removal And Installation on Page 50-10-1.) Figure 60-110-5 Remove the mounting bolt (Item 1) from the seat bar mount (Item 2) [Figure 60-110-5]. Installation: Tighten the mounting bolt to 5,6 — 7,9 N•m (50 — 70 in-lb) torque. Remove the sensor mounting bolt (Item 3) [Figure 60- 110-5] and nut. Figure 60-110-6 Remove the keyed pl

• 50-03 S650 Service Manual CONTROL HANDLE / LEVER (ACS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-111-1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-111-1 Handle Sensor Removal And Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-111-1 Handle Removal And Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-111-4 Handle Disassembly And Assembly . . .

• 60-90-3 S650 Service Manual DIAGNOSTIC SERVICE CODES (CONT’D) Service Codes List (Cont’d) CODE DESCRIPTION CODE DESCRIPTION D7521 Left joystick Y-axis out of range high D7572 Drive pump not calibrated D7522 Right joystick Y-axis out of range high D7573 Operating mode switch flipped while operating D7523 Right front wheel angle sensor out of range high D7574 Right wheel speed uncommanded motion D7524 Left front wheel angle sensor out of range high

• 40-20-4 S650 Service Manual DRIVE COMPONENTS (CONT’D) Axle, Sprocket And Bearings Removal And Installation The tools listed will be needed to do the following procedure: MEL1242 — Port-a-Power MEL1202B — Axle Bearing Service Set NOTE: The procedure shown for removal and installation of the axle, sprocket and bearings is for a front axle. This procedure will be the same for the rear axle. DANGER P-90328 AVOID DEATH • Disconnecting or loosening any hydraulic tubeline, hose, fitting, component or a part failure can cause lift

• 30-30-4 S650 Service Manual HYDROSTATIC MOTOR CARRIER (CONT’D) Disassembly Figure 30-30-3 Remove the large O-ring from the groove (Item 1) [Figure 30-30-3] in the housing. Figure 30-30-4 Put the motor carrier in a hydraulic press [Figure 30-30- 4]. Put a small amount of pressure on the shaft to release the pre-load on the snap ring. Figure 30-30-5 Remove the snap ring (Item 1) [Figure 30-30-5] from the shaft. Figure 30-30-6 Use a hydraulic press to remove the shaft from the housing [Figure 30-30-6]. P5760 1 P5768 P-76544 1 P5766
  

• 70-20-1 S650 Service Manual ENGINE SPEED CONTROL Removal And Installation Figure 70-20-1 Remove the two nuts (Item 1) [Figure 70-20-1]. Figure 70-20-2 The speed control cable (Item 1) is connected to the speed control handle (Item 2) by a ball and socket end [Figure 70-20-2]. Disconnect the speed control cable (Item 1) from the speed control handle (Item 2) [Figure 70-20-2]. Loosen the jam nut (Item 3) [Figure 70-20-2] from the speed control cable. Remove the cable from the speed control handle. Disassembly And Assembly Figure 70-20-3 Remove the nut (Item 1) and remove

• 20-40-15 S650 Service Manual HYDRAULIC CONTROL VALVE (STANDARD) (CONT’D) Lift Spool And Detent Removal And Installation The tool listed will be needed to do the following procedure: MEL1278 — Detent Tool MEL1285 — Detent Spring Tool Remove the end cap / spool lock block from the control valve. Figure 20-40-43 Remove the O-ring (Item 1) [Figure 20-40-43]. Installation: Replace the O-ring, and lubricate the o-ring lightly with grease or oil before installation of the end cap/ spool lock block. Figure 20-40-44 Remove the spacer (Item 1) and O-ring

• 50-41-6 S650 Service Manual
  

• 50-110-1 S650 Service Manual CONTROL HANDLE / LEVER Description The control handles / levers are used to control the forward and reverse travel. The control handles / levers are mounted to the control panel assembly. Lever Removal And Installation Figure 50-110-1 Remove the tie strap and disconnect the electrical connectors (Item 1) [Figure 50-110-1] from the control lever. Remove the four nuts (Item 2) and the plate (Item 3) [Figure 50-110-1] used to m

• FOREWORD
• SAFETY INSTRUCTIONS
• SERIAL NUMBER LOCATIONS
• DELIVERY REPORT
• BOBCAT LOADER IDENTIFICATION
• PREVENTIVE MAINTENANCE
• HYDRAULIC SYSTEM
• HYDROSTATIC SYSTEM
• DRIVE SYSTEM
• MAIN FRAME
• ELECTRICAL SYSTEM
• ENGINE SERVICE
• SYSTEM ANALYSIS
• SPECIFICATIONS

S/N A3WT11001 & Above

S/N B38T11001 & Above

Attachment Catalogue Bobcat. Download

AL350 Specs PDF. Download

753 Service Manual. Download

753 Specs PDF. Download

853 Operator Manual. Download

Battery Reference Guide. Download

Engine Service Manual Kubota PDF. Download

Loader A770 Maintenance Manual. Download

Loader T190 Maintenance Manual. Download

OTDR Manual VD.pdf Download

S 150 Maintenance Manual. Download

S 220 Maintenance Manual. Download

S 250 Maintenance Manual. Download

BOBCAT 873 SKID STEER LOADER Service Repair Manual Download

(S/N 514114999 & Below) 

(S/N 514212999 & Below)

BOBCAT 863 SKID STEER LOADER Service Repair Manual Download

BOBCAT 853 SKID STEER LOADER Service Repair Manual Download

BOBCAT 853H SKID STEER LOADER Service Repair Manual Download

BOBCAT 773 SKID STEER LOADER Service Repair Manual Download

(S/N 517611001 & Above)

(S/N 518011001 & Above)

(S/N 518111001 & Above)

(S/N 519011001 & Above)

(S/N 519211001 & Above)

(S/N 500 K 11001 & Above)

BOBCAT 763 SKID STEER LOADER Service Repair Manual Download

BOBCAT 743 SKID STEER LOADER Service Repair Manual Download

BOBCAT 743B SKID STEER LOADER Service Repair Manual Download

BOBCAT 743DS SKID STEER LOADER Service Repair Manual Download

BOBCAT 742 SKID STEER LOADER Service Repair Manual Download

BOBCAT 742B SKID STEER LOADER Service Repair Manual Download

BOBCAT 741 SKID STEER LOADER Service Repair Manual Download

BOBCAT 600 SKID STEER LOADER Service Repair Manual Download

BOBCAT 600D SKID STEER LOADER Service Repair Manual Download

BOBCAT 610 SKID STEER LOADER Service Repair Manual Download

BOBCAT 611 SKID STEER LOADER Service Repair Manual Download

BOBCAT 553 SKID STEER LOADER Service Repair Manual Download

S/N 516311001 & Above

S/N 516411001 & Above

BOBCAT S650  Service Repair Manual Download

S/N A3NW11001 & Above

BOBCAT S300  Service Repair Manual Download

S/N 525811001 & Above

S/N 525911001 & Above

BOBCAT S250  Service Repair Manual Download

S/N 526011001 & Above

S/N 526111001 & Above

BOBCAT S185  Service Repair Manual Download

BOBCAT S175  Service Repair Manual Download

S/N 525011001 & Above

S/N 525111001 & Above

S/N 525211001 & Above

S/N 525311001 & Above

BOBCAT S130  Service Repair Manual Download

SIN 527311001 & Above

SIN 527411001 & Above

S 530 Maintenance Manual Download

s300 service manual pdf Download

Skid Steer 450-453-BICS-SM Service Manual PDF Download

Skid Steer 743 Operators Manual  Download

Skid Steer 753 Service Manual. Download

Skid Steer 773 Service Repair Manual Download

Skid Steer 873 Repair Manual PDF Download

Skid Steer S130 Service Manual PDF Download

Skid Steer S150 Turbo Service Manual PDF b Download

Skid Steer S175 S185 Turbo Service Manual PDF Download

Skid Steer S185 Operators Manual PDF Download

Skid Steer S185 Turbo Service Manual PDF Download

Skid Steer S205 Operators Manual PDF Download

Skid Steer S220 Service Manual PDF Download

skid steer service repair manual(Models 741-742-743-742b-743b-743ds-7434s)  Download

T2556 Hydraulic Schematic PDF b Download

T35120SL Hydraulic Schematic EWD PDF Download

Training Part 2.pdf 2Mb Download

Utility Vehicle 2200D Operators Manual PDF Download

Wheel Loader T35120SL Operators Manual PDF Download

Cargador Compacto Bobcat S-185 Download

2225 WHP 05-06 Parts Catalogue. Download

Parts List PDF Download

Skid Steer 751 Parts Manual PDF Download

Skid Steer 753G Master Parts Manuals Catalog Download

Skid Steer 773 Parts Manual PDF Download

Skid Steer 853 F Parts Manual PDF Download

Skid Steer 863G Parts Manual PDF Download

Skid Steer 963 Parts Manual PDF Download

Skid Steer S250 Parts Manual PDF Download

Skid Steer T190 Parts Manual PDF Download

442 Mini Excavator Service Manual PDF Download

Excavator 325-328 Service Manual PDF Download

Excavator 444 Specs PDF Download

Excavator E32 Service Manual PDF Download

Cargador (Serie G) Electrical Wiring Diagrams Download

In 1959, Bobcat released an improved model of the M-200 loader, which differed from its predecessor with a powerful 12.9 hp gasoline engine.

In 1960, the company launched the world’s first compact skid steer loader with four-wheel drive, the M-400. The Bobcat company was originally called Melroe. It acquired its catchy name later in
honor of the M-440 loader (an improved version of the M-400) named in 1962, which they began to produce successfully.

The decision to name the agile loader with a bright and catchy name led to the birth of the name «Bobcat» — «lynx». In the same year, a logo was developed — a lynx inside a double oval, and the
slogan «agile, fast, hardy» (like the lynx itself) was used to advertise the loaders. The logo first adorned the M-440 loader, and then all Bobcat loader models.

In 1963, the M-444 slewing loader model was developed and exported to Europe. This model of equipment brought real success to the Bobcat company due to the improved designs, on which the
company’s engineers worked for 2 years. The indisputable advantage of the M-444 was the fact that they could be used in industry and construction.

Thus, Bobcat has significantly expanded its manufacturing capabilities beyond the production of only agricultural machinery. In order to gain a foothold in the European market, Bobcat in 1965
signed a licensing agreement with the British company Luff & Smith for the production of skid steer loaders.

Bobcat is building a new plant in England near Luff & Smith. And all in the same 1965, for the first time in its history, Bobcat produces a record number of loaders that have found their
customers in different markets — from builders to fertilizer plants, from foundries to municipalities.

In 1967 Bobcat signed an agreement for the production of forklifts in Europe with the Italian company Beltrami (Luff & Smith went bankrupt and Bobcat had to look for a new partner). At the
same time, she acquires Reiten Manufacturing of Cooperstown.

In 1969, the American company was acquired by the Clark Equipment Company. By the late 1960s, Bobcat’s product range included Merloe Pickup trucks, Harrowweeder weeding and harrowing machines,
blade plows and more. The beginning of the 1970s was marked by the modernization of production.

In 1970, the Bob-Tach (quick attachment) system was introduced and the ROPS operator was protected from possible workplace injuries. That year was also remembered for the start of production of
the first loader with a hydrostatic drive M-970. In the European market, the company was doing well, in 1971 it managed to open a large marketing department in Brussels.

In 1977, Bobcat equipment first appeared on the market; at that time, preference was given to small-sized universal machines. Also in 1977, a dealer show was held in Monte Carlo, where Bobcat
presented a series of loaders, and on a separate M-530 model, improvements in the operator’s cab were shown (comfort was associated with the seat and armrests).

In 1984, the former logo of the company was changed, now it consisted of one head of a lynx and could not help but attract attention. In the second half of the 1980s, Bobcat felt the strength to
transform itself into a world leader in compact equipment. For these purposes, 2 production lines were launched in 1986 — compact trenchers and mini-excavators.

In 1991, the first Bobcat dealer center (Bobcat LLC) was opened in Moscow. At the same time, the company launched production of the 50-series skid steer loaders, and the production facilities
were improved with electronics and safety issues, in 1994 they were supplemented with the Lot production facilities.

In 1995, Bobcat became part of the Ingersoll-Rand Company, a leading manufacturer of industrial machinery and construction equipment. In 1998 Bobcat was able to
expand its product range by launching the 337/341 mini excavator models with a lifting capacity of 5 tons. Bobcat also acquires Palm Attachment Sales, an American company in the 1980s that
manufactures forklift attachments.

In 1999, European factories begin to produce compact loaders (model 864). Among Bobcat’s purchases, it is worth noting the French company Sambron SA, acquired in 2000. It has been on the market
for a long time and specializes in the production of forklift trucks.

In 2001, the Czechmanufacturer of compact front loader excavators with Superstav backhoe. All the same year, the A220 was introduced in Europe, a loader that combines skid steer and all-wheel
steering, which is achieved in the operator’s cab with a simple flick of a switch. There have been no analogues of such a model in the world yet.

In 2002 Bobcat starts production of mini excavators. Further expansion of products was dictated by the latest technologies, innovative developments and investments.

Since 2007, Bobcat has been owned by the South Korean company Doosan Infracore. A new training center and plant has opened in the Czech Republic, which produces new models of telehandlers.

In 2008, the Bobcat company celebrated its 50th anniversary. The interim results and analysis of how the Bobcat brand was created were summarized. The fact is that after the completion of the
formation of the concept of skid steer loaders + the constant growth of consumers allowed the company to develop and produce machines with unique characteristics. In the middle of the last
century, the main emerging markets were fertilizer producers and dairy farms.

Bobcat experts came up with a simple scheme — to paint the cars in white paint as a symbol of cleanliness and sterility. This color, new logo and company name have become the trademark of Bobcat,
a mark of success and quality.

Bobcat today is the largest manufacturer of construction and agricultural equipment with more than 900 dealers in more than 75 countries around the world. The main products of the company are
compact excavators, attachments and skid steer loaders.

In Europe, Bobcat has strengthened its position with factories and a European Marketing Center in Belgium. All in the same Europe, the name «Bobcat» began to be applied to any loader, regardless
of the manufacturer, with which the American company has been struggling for several years.

For over 50 years, much has changed, but one thing has not changed — Bobcat’s commitment to professional excellence and excellence through innovation and pioneering spirit.