Canon eos m50 mark ii руководство

• Поиск драйверов последней версии для вашего продукта

• ПО для удобства использования наших продуктов

• Полезные руководства для эффективного использования продукта

• Обзор приложений для вашего продукта

• Поиск встроенного ПО последней версии для вашего продукта

• Нужна помощь? Посмотрите раздел часто задаваемых вопросов

• Посмотрите последние новости о вашем продукте

• Найдите решения в соответствии с отображаемым на продукте кодом ошибки

• Технические характеристики

  Ознакомьтесь с техническими характеристиками вашего продукта

Left Right

Вам также может понадобиться…

Данная инструкция на русском языке предназначена для фотокамеры
Canon EOS M50 Mark II, описывает принцип работы и основные моменты эксплуатации устройства.

Производитель настойчиво рекомендует перед включением фотокамеры
внимательно изучить настоящую инструкцию.

Инструкция для фотокамеры
представлена в формате PDF. Все современные браузеры уже поддерживают данный формат и сложностей с открытием файла возникнуть не должно.

Но если открыть инструкцию все же не удается, то необходимо установить на компьютер программу для чтения PDF файлов, например, Acrobat Reader. Если у вас возникли сложности с открытием инструкции на смартфоне под управлением Android, нужно установить, например, Adobe Acrobat Reader.

1. Manuals
2. Brands
3. Canon Manuals
4. Digital Camera
5. EOS M50 Mark II
6. Advanced user’s manual

• Page 1
  Advanced User Guide CT2-D101-A © CANON INC. 2020…

• Page 2: Table Of Contents

  Contents Introduction……….9 Package Contents.

• Page 3
  Sports Mode……….104 Panning Mode.
• Page 4
  Image Quality……….207 Still Image Aspect Ratio.
• Page 5
  Movie Recording……….298 Movie Recording Quality.
• Page 6
  Creative Filters……….426 Red-Eye Correction.
• Page 7
  Responding to Error Messages……..580 Wireless Communication Function Precautions….. . . 590 Security.
• Page 8
  Reference……….655 Importing Images to a Computer.

• Page 9: Introduction

  After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused. Copyrights…

• Page 10: Package Contents

  Be careful not to lose any of these items. Caution When you need Lens Instruction Manuals, download them from the Canon website Lens Instruction Manuals (PDF files) are for lenses sold separately, and when a lens kit is purchased, some accessories included with the lens may not match…

• Page 11: Instruction Manuals

  The Instruction Manual included with the camera provides basic instructions for the camera and Wi-Fi functions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C007/ Lens/Software Instruction Manual Download from the following website. https://cam.start.canon/ Note…

• Page 12: Quick Start Guide

  Quick Start Guide Insert the battery ( Upon purchase, charge the battery to start using ( Insert the card ( Insert the card with the label facing the front of the camera until it clicks into place.

• Page 13
  Attach the lens ( Align the lens mount indexes (white) on the lens and camera to attach the lens. Prepare to shoot ( Press (1) as you turn (2) slightly, then release (1). Turn (2) a little more until it clicks. Set the power switch to <…
• Page 14
  Flip out the screen ( If the [Date/Time/Zone] setting screen is displayed, see Date/Time/ Zone. Focus on the subject ( Center the subject on the screen. Press the shutter button halfway, and the camera will focus on the subject. If < >…
• Page 15
  Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen ( To display the image again, press the < > button (…

• Page 16: About This Guide

  About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide Indicates the dial. < > < >< > Indicates the direction to press the cross keys. < >< > Indicates the Quick Control/Set button. <…

• Page 17
  Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > ( It is assumed that all the menu settings and Custom Functions are set to their defaults. Screen shots in this guide show the default menu settings for NTSC regions (North America, Japan, South Korea, Mexico, etc.) as an example.

• Page 18: Compatible Cards

  Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( SD/SDHC/SDXC memory cards UHS-I cards supported. Cards That Can Record Movies When recording movies, use a high-capacity card with ample performance (fast enough writing and reading speeds) for the movie recording size.

• Page 19: Safety Instructions

  Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.

• Page 20
  Observe the following instructions when using a battery charger. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. •…
• Page 21
  CAUTIONS: Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.

• Page 22: Handling Precautions

  The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.

• Page 23
  Besides dust entering the camera from outside, in rare cases, lubricant from the camera’s internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center. Lens…

• Page 24: Part Names

  Part Names…

• Page 25
  Shutter button < > Dial EF-M lens mount index Image sensor Grip Contacts Lens mount Movie shooting button Power switch (10) Mode dial (11) < > Multi-function button (12) Built-in flash (13) Microphone (14) < > Focal plane mark (15) Strap mount (16) AF-assist beam/Red-eye reduction/Self-timer/Remote control lamp…
• Page 27
  Screen Viewfinder Hot shoe Flash sync contacts Access lamp Strap mount < > Wi-Fi button < > Quick Control/Set button < > Left/Autofocus/Manual focus button (10) < > Playback button (11) < > AE lock/< > Magnify button (12) < >…
• Page 28
  Mode dial Features on the Mode dial are grouped into Basic Zone, Creative Zone, and movie recording modes. (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. : Scene Intelligent Auto ( : Hybrid Auto ( : Special scene (…
• Page 29
  (2) Creative Zone These modes give you more control for shooting various subjects as desired. Program AE (P) Shutter priority AE (Tv) Aperture priority AE (Av) Manual exposure (M) (3) Movie recording For a variety of movie recording (…
• Page 30
  Battery Charger LC-E12 Charger for Battery Pack LP-E12 ( Power plug Charge lamp Full-charge lamp Battery pack slot Battery Charger LC-E12E Charger for Battery Pack LP-E12 ( Power cord socket Charge lamp Full-charge lamp Battery pack slot Power cord…
• Page 31
  Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.

• Page 32: Software

  Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Downloading the Software Instruction Manual Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.

• Page 33
  Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly.
• Page 34
  Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Enter the serial number on the bottom of the camera, then download the software. Decompress it on the computer. For Windows Click the displayed installer file to start the installer.
• Page 35
  Downloading the Software Instruction Manual Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer. Software Instruction Manual download site https://cam.start.canon/…

• Page 36: Preparation And Basic Operations

  Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. • Charging the Battery • Inserting/Removing the Battery and Card • Using the Screen • Turning on the Power • Attaching/Detaching Lenses •…

• Page 37: Charging The Battery

  Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery into the charger. Do the opposite to remove the battery.

• Page 38
  Charge the battery. LC-E12 Flip out the charger prongs as shown and plug the charger into a power outlet. LC-E12E Connect the power cord to the charger and insert the plug into a power outlet. Charging starts automatically and the charge lamp (1) lights up in orange.
• Page 39
  Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet.

• Page 40: Inserting/Removing The Battery And Card

  Inserting/Removing the Battery and Card Insertion Formatting the Card Removal Insert a fully charged Battery Pack LP-E12 and card in the camera. The captured images are recorded onto the card. Insertion Slide the card/battery compartment cover open. Insert the battery. Insert the end with the electrical contacts.

• Page 41
  Insert the card. Insert the card with the label facing the front of the camera until it clicks into place. Caution Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing. Close the cover. Slide the cover until it clicks shut. Caution You cannot use batteries other than the Battery Pack LP-E12.
• Page 42
  Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (…
• Page 43
  Removal Slide the card/battery compartment cover open. Set the power switch to < >. Make sure the access lamp (1) is off before opening the card/battery compartment cover. If [Saving…] is displayed on the screen, close the cover. Removing the battery. Press the battery lock lever as shown by the arrow and remove the battery.
• Page 44
  Remove the card. Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover. Note The number of available shots varies depending on the remaining capacity of the card, the settings of image quality, ISO speed, etc.
• Page 45
  Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card/battery compartment cover. To avoid corrupting image data or damaging cards or the camera, never do any of the following while the access lamp is lit or blinking.

• Page 46: Using The Screen

  Using the Screen You can change the direction and angle of the screen. Flip out the screen. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. Face it toward you.

• Page 47
  Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen.

• Page 48: Turning On The Power

  Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. You can now shoot still photos and record movies. < > The camera is turned off and does not function. Set the power switch to this position when not using the camera.

• Page 49
  Setting the Date, Time, and Time Zone If the [Date/Time/Zone] setting screen is displayed after you turn on the camera, see Date/ Time/Zone to set the date, time, and time zone. Changing the Interface Language To change the interface language, see Language. Automatic Sensor Cleaning Whenever the power switch is set to <…
• Page 50
  Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Battery level is sufficient. Battery level is low, but the camera can still be used. Battery will be exhausted soon (blinks). Charge the battery. Caution Doing any of the following will exhaust the battery faster: •…

• Page 51: Attaching/Detaching Lenses

  Attaching/Detaching Lenses Attaching a Lens Detaching a Lens All EF-M lenses can be used. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.

• Page 52
  Attach the lens. Align the white mount index on the lens with the mount index on the camera and turn the lens as shown until it clicks into place. Prepare to shoot. Press (1) as you turn (2) slightly, then release (1). Turn (2) a little more until it clicks.
• Page 53
  Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed. Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera’s power switch to <…
• Page 54
  Tips for avoiding smudges and dust When changing lenses, do it quickly in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove smudges and dust on the body cap before attaching it.

• Page 55: Attaching/Detaching Ef/Ef-S Lenses

  Attaching/Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens EF and EF-S lenses can be attached by using an optional Mount Adapter EF-EOS M. Attaching a Lens Remove the caps. Remove the caps on the lens, adapter, and body.

• Page 56
  Attach the lens to the adapter. (1) Red index (2) White index Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. Attach the adapter to the camera.
• Page 57
  Set the lens’s focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
• Page 58
  Detaching a Lens While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise.

• Page 59: Basic Operations

  Basic Operations Adjusting the Viewfinder (Dioptric Adjustment) Holding the Camera Shutter Button Dial < > Info Button Multi-Function Button Adjusting the Viewfinder (Dioptric Adjustment) Switch the display mode. To use the viewfinder, activate it by holding it near your eye. Adjust the diopter.

• Page 60
  Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1. With your right hand, hold the camera firmly by the camera grip. 2. With your left hand, support the lens from below. 3.
• Page 61
  Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen for 8 sec.
• Page 62
  Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
• Page 63
  Dial Watch the screen as you turn the < > dial. Use this dial to set the shutter speed, aperture value, etc.
• Page 64
  < > Info Button Each press of the < > button changes the information shown. The following examples are still photo shooting screens in < > mode. In (3), an electronic level or histogram is displayed, for example.
• Page 65
  Multi-Function Button By pressing the < > button and then turning the < > dial, you can set the ISO speed (…

• Page 66: Setting The Screen Display Level

  Setting the Screen Display Level Menu Display Shooting Mode Guide Feature Guide You can set how information is displayed on the screen according to your preference. Change the settings as necessary. Display the main tabs. Press the < > button to display the menu screen.

• Page 67
  Select the [ ] tab. Turn the < > dial or press the < >< > keys to select the [ tab, then press < >. Menu Display You can choose from [Standard] or [Guided] as the type of menu display. When set to [Guided], the camera displays main tab descriptions after you press the <…
• Page 68
  Select the display type. (1) Main tabs Note The [ ] tab (My Menu tab) is not displayed when [Guided] is set. For access to My Menu ( ), change the menu display level to [Standard].
• Page 69
  Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. The default setting is [Enable]. Select [ : Mode guide]. Select [Enable]. Turn the Mode dial. A description of the selected shooting mode will appear.
• Page 70
  Press the < > key. The rest of the description will appear. To clear the mode guide, press < >. In < >/< > mode, you can display the shooting mode selection screen.
• Page 71
  Feature Guide A brief description of functions and items can be displayed when you use Quick Control or menu settings. The default setting is [Enable]. Select [ : Feature guide]. Select [Enable].
• Page 72
  Sample screens Quick Control screen Menu Screen (1) Feature guide Note To clear a description, either tap it or continue performing operations.

• Page 73: Menu Operations And Settings

  Menu Operations and Settings Menu Screen Menu Setting Procedure Dimmed Menu Items Screen < > button < > button < > button < > Dial…

• Page 74
  Menu Screen The menu tabs and items displayed vary depending on the shooting mode. Basic Zone Movie recording Creative Zone Secondary tabs Menu settings Menu items…
• Page 75
  Menu Setting Procedure When set to [ : Menu display: Guided] Display the main tabs. When you press the < > button, the main tabs (1) and a description of the selected tab will appear. Select a main tab. Turn the < >…
• Page 76
  Select a secondary tab. Use the < >< > keys or turn the < > dial to select a secondary tab. Select an item. Use the < >< > keys to select an item, then press < >. Select an option. Use the <…
• Page 77
  Set an option. Press < > to set it. If you change the setting from the default, it will be indicated in blue (available only for the menu items under the [ ] tab). Exit the setting. Press the < >…
• Page 78
  When set to [ : Menu display: Standard] Display the menu screen. Press the < > button to display the menu screen. Select a tab. Press the < > button to switch between main tabs (1). Use the < >< >…
• Page 79
  Dimmed Menu Items Example: When set to [Highlight tone priority] Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <…

• Page 80: Quick Control

  Quick Control During Shooting During Playback You can directly select and set the settings displayed on the screen. During Shooting Press < > ( Select an item. Press the < >< > keys for selection. When the screen above is displayed, press the <…

• Page 81
  Select an option. Turn the < > dial or press the < >< > keys to adjust the setting. Some items are set by pressing a button after this. Press < > to return to the previous screen.
• Page 82
  During Playback Press < >. Select an item. Press the < >< > keys for selection. Select an option. Turn the < > dial or press the < >< > keys to adjust the setting. Some items are set by pressing a button after this. Configure items labeled with a [ ] icon on the bottom of the screen by pressing <…

• Page 83: Touch-Screen Operation

  Touch-Screen Operation Tapping Dragging Tapping Sample screen (shooting functions screen) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen.

• Page 84
  Dragging Sample screen (Menu screen) Slide your finger while touching the screen.

• Page 85: Basic Zone

  Basic Zone This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically. • Scene Intelligent Auto •…

• Page 86: Scene Intelligent Auto

  Scene Intelligent Auto Recomposing the Shot Shooting Moving Subjects Scene Icons Adjusting Settings Shooting with Effects Applied (Creative Assist) < > is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( Set the Mode dial to <…

• Page 87
  Aim the camera at what you will shoot (the subject). Essentially, the camera focuses on the closest subject. AF points (1) are displayed over any faces or eyes detected. When a frame (AF point) appears on the screen, aim it over the subject.
• Page 88
  Take the picture. Press the shutter button completely to take the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To retract the built-in flash, push it down with your fingers. Caution Subject movement (whether subjects are still or moving) may not be detected correctly for some subject or shooting conditions.
• Page 89
  Focusing is not possible (indicated by an orange AF point). Aim the AF point over an area with good contrast, then press the shutter button halfway ). If you are too close to the subject, move away and shoot again. Multiple AF points are displayed simultaneously.
• Page 90
  Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.
• Page 91
  Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. In still photo shooting, an icon representing the detected scene appears in the upper left of the screen ( Adjusting Settings By touching icons on the screen, you can adjust settings for drive mode, image quality, Touch Shutter, and Creative Assist.
• Page 92
  Shooting with Effects Applied (Creative Assist) Press < >. Read the message and select [OK]. Select an effect. Use the < > dial or < >< > keys to select an effect, then press < >.
• Page 93
  Select the effect level and other details. Use the < > dial or < >< > keys to set it, then press < >. To reset the setting, press the < > button, then select [OK].
• Page 94
  Creative Assist effects ] Preset Select one of the preset effects. Note that [Saturation], [Color tone 1], and [Color tone 2] are not available with [B&W]. ] Background blur Adjust background blur. Choose higher values to make backgrounds sharper. To blur the background, choose lower values.

• Page 95: Hybrid Auto

  Hybrid Auto With < > mode, you can make a short movie of the day just by shooting still photos. The camera records 2–4-second clips of scenes before each shot, which are later combined in a digest movie ( Still photo shooting functionality is the same as in < >…

• Page 96
  Note For more impressive digest movies, keep the camera aimed at subjects for about 4 sec. before shooting still photos. Battery life is shorter in this mode than in < > mode, because digest movies are recorded for each shot. A digest movie may not be recorded if you shoot a still photo immediately after turning the camera on, selecting <…

• Page 97: Special Scene Mode

  Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * < > stands for Special Scene. Set the Mode dial to < >. Press < >.

• Page 98
  Select a shooting mode. Use the < > dial or < >< > keys to select a shooting mode, then press < >. Note You can also set the shooting mode in [ : Shooting mode]. When [ : Mode guide] is set to [Disable], after step 1, press < >…
• Page 99
  Available Shooting Modes in <SCN> Mode Shooting Mode Self Portrait Close-up Portrait Food Smooth skin Night Portrait Landscape Handheld Night Scene Sports HDR Backlight Control Panning Silent Mode…

• Page 100: Self Portrait Mode

  Self Portrait Mode To take shots that include yourself, use [ ] (Self Portrait) mode. Rotate the screen around toward the lens. Customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out. Shooting tips Set the brightness and smooth skin effect.

• Page 101: Portrait Mode

  Portrait Mode Use [ ] (Portrait) mode to blur the background and make the person you shoot stand out. It also makes skin tones and hair look softer. Shooting tips Select the location where the distance between the subject and the background is the farthest.

• Page 102: Smooth Skin Mode

  Smooth Skin Mode Use [ ] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting tips Enable the camera to detect faces. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can move closer to or farther from the subject so that the frame is displayed on the subject’s face.

• Page 103: Landscape Mode

  Landscape Mode Use [ ] (Landscape) mode for expansive scenery, to keep everything in focus from near to far. For vivid blues and greens, and sharp and crisp images. Shooting tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus.

• Page 104: Sports Mode

  Sports Mode Use [ ] (Sports) mode to shoot subjects in motion, such as runners or moving vehicles. Shooting tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. Track the subject with the Area AF frame. An Area AF frame appears after you press the shutter button halfway.

• Page 105: Panning Mode

  Panning Mode By panning, you can blur the background to convey a sense of speed. Attach a lens compatible with [ ] (Panning) mode to reduce subject blurring and keep subjects clear and sharp. Shooting tips Turn the camera to follow the moving subject. As you shoot, turn the camera smoothly while tracking the moving subject.

• Page 106
  Caution For details on lenses compatible with [ ] mode, visit the Canon website. Shutter speeds are slower. For this reason, Panning mode is not suitable unless you pan as you shoot. The default setting is [ ]. Note that [ ] is not available.

• Page 107: Close-Up Mode

  Close-up Mode Use [ ] (Close-up) mode for close-ups of small subjects such as flowers. To make small things appear much larger, use a macro lens (sold separately). Shooting tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject.

• Page 108: Food Mode

  Food Mode Use [ ] (Food) mode for culinary photography. The photo will look bright and appetizing. Also, the reddish tinge due to the light source will be suppressed in the pictures taken under tungsten lights, etc. Shooting tips Change the color tone. [Color tone] can be adjusted.

• Page 109: Night Portrait Mode

  Night Portrait Mode Use [ ] (Night Portrait) mode for bright, beautiful shots of people with night scenes in the background. Note that shooting in this mode requires the built-in flash or a Speedlite. Using a tripod is recommended. Shooting tips Use a wide-angle lens and a tripod.

• Page 110
  Caution Tell subjects to remain still for a moment after the flash fires. Focusing may be difficult if subject faces look dark when you shoot. Focus manually in this case, either by pressing the < > key to specify [MF] focus mode or by setting the lens focus mode switch to <…

• Page 111: Handheld Night Scene Mode

  Handheld Night Scene Mode ] (Handheld Night Scene) mode enables handheld shooting for night scenes. In this shooting mode, four shots are taken consecutively for each picture, and the resulting image with reduced camera shake is recorded. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).

• Page 112
  Caution Compared to other shooting modes, the image area will be smaller. RAW image quality cannot be set. Autofocusing at night or in dark scenes may be difficult when points of light lie within the AF point. Focus manually in this case, either by pressing the < >…

• Page 113: Hdr Backlight Control Mode

  HDR Backlight Control Mode Use [ HDR Backlight Control) mode for backlit scenes with both bright and dark areas. Shooting once in this mode captures three consecutive images at different exposures, which are combined to create a single HDR image that retains detail in shadows that might otherwise be lost from backlighting.

• Page 114: Silent Mode

  Silent Mode Where silence is needed, you can shoot without beeps or shutter release sounds. As you shoot, a white frame is momentarily displayed around the screen. Shooting tips Take some test shots. Consider taking some test shots in advance, because lens aperture and focusing adjustment may be audible under some shooting conditions.

• Page 115: Creative Filters Mode

  Creative Filters Mode Creative Filter Characteristics Adjusting the Miniature Effect You can shoot with filter effects applied. Filter effects can be previewed before you shoot. Set the Mode dial to < >. Press < >.

• Page 116
  Select a filter effect. Use the < > dial or < >< > keys to select a filter effect ( then press < >. The image is shown with the filter effect applied. Adjust the effect and shoot. Press < >…
• Page 117
  Note With [Grainy B/W], the grainy preview will differ somewhat from the appearance of your shots. With [Soft focus] or [Miniature effect] options, the blurred effect preview may differ somewhat from the appearance of your shots. No histogram is displayed. A magnified view is not available.
• Page 118
  Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.
• Page 119
  HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat, so that the picture looks faded and old. The subject outlines will have intensely bright (or dark) edges. Caution ], [ ], [ ], and [ ] precautions Compared to other shooting modes, the image area will be smaller.
• Page 120
  Adjusting the Miniature Effect Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the < > button or tap [ ] in the lower right of the screen. By tapping ], you can also switch between vertical and horizontal scene frame orientation.
• Page 121
  Move the AF point as needed and shoot. The AF point turns orange and can be moved. Press the < >< >< >< > keys to move the AF point to the position to focus on. Aligning the AF point and scene frame is recommended. To return the AF point to the center of the screen, tap [ ] in the lower left of the screen.

• Page 122: Creative Zone

  Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the shooting mode description displayed when you turn the Mode dial, press <…

• Page 123: Program Ae Mode (P)

  Program AE Mode (P) The camera automatically sets the shutter speed and aperture value to suit the subject’s brightness. * < > stands for Program. * AE stands for Auto Exposure. Set the Mode dial to < >. Focus on the subject. Aim the AF point over the subject and press the shutter button halfway.

• Page 124
  Take the picture. Compose the shot and press the shutter button completely. Caution If the “30″” shutter speed and the lowest aperture value blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/4000” shutter speed and the highest aperture value blink, it indicates overexposure.

• Page 125: Shutter-Priority Ae Mode (Tv)

  Shutter-Priority AE Mode (Tv) In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.

• Page 126
  Set the desired shutter speed. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained.
• Page 127
  Note Shutter speed display For shutter speeds slower than 1/4 sec., display changes from the denominator format to «. For example, 0″5 indicates 0.5 sec. and 15», 15 sec.

• Page 128: Aperture-Priority Ae Mode (Av)

  Aperture-Priority AE Mode (Av) In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.

• Page 129
  Set the Mode dial to < >. Set the desired aperture value. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
• Page 130
  Caution If the “30″” shutter speed blinks, it indicates underexposure. Turn the < > dial to decrease the aperture value (open the aperture) until the shutter speed blinking stops or set a higher ISO speed. If the “1/4000” shutter speed blinks, it indicates overexposure. Turn the <…
• Page 131
  Depth-of-Field Preview The aperture changes only at the moment you shoot, and it remains open at other times. For this reason, the depth of field shown on the screen looks narrow, or shallow. To check the area in focus, assign [ ] (depth-of-field preview) to a button and press it.

• Page 132: Manual Exposure Mode (M)

  Manual Exposure Mode (M) In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. * < > stands for Manual. Set the Mode dial to <…

• Page 133
  Set the desired aperture value. Press the < > key to select the aperture value, then turn the < > dial to set a value. Focus on the subject. (1) Standard exposure index (2) Exposure level mark Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level.
• Page 134
  Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation ( ) as follows: Tap the exposure level indicator : Expo.comp./AEB] Caution Exposure may not be as expected when ISO Auto is set, because the ISO speed is adjusted to ensure standard exposure for your specified shutter speed and aperture value.

• Page 135: Long (Bulb) Exposures

  Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. Set the Mode dial to <…

• Page 136
  Set the desired aperture value. Press the < > key to select the aperture value, then turn the < > dial to set a value. Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely.

• Page 137: Af, Drive, And Exposure Settings

  AF, Drive, and Exposure Settings This chapter describes how to configure AF, drive mode, metering mode, and related settings. Caution < > stands for autofocus. < > stands for manual focus. • AF Operation • AF Method • Manual Focus •…

• Page 138: Af Operation

  AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects AF-assist beam You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode.

• Page 139
  Note Without using the menu, you can also switch focus modes by pressing the < > key.
• Page 140
  One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. Once a subject is in focus, the focusing AF point turns green and the camera beeps. If focus is not achieved, the AF point will turn orange.
• Page 141
  Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. Once a subject is in focus, the focusing AF point turns blue. For details on the continuous shooting speed for continuous shooting, see Drive Mode.
• Page 142
  AF-assist beam The AF-assist beam ( ) may fire when you press the shutter button halfway under low light or in similar conditions, to make autofocusing easier. With a Speedlite, configure the setting on the Speedlite as needed. Caution The flash does not emit an AF-assist beam when AF operation is set to [Servo AF]. Note To disable AF-assist beam firing, set [ : AF-assist beam firing] to [Disable].

• Page 143: Af Method

  AF Method Selecting the AF Method Eye Detection Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In < >, <…

• Page 144
  : Spot AF The camera focuses in a narrower area than [1-point AF]. : 1-point AF The camera focuses using a single AF point [ : Zone AF Focuses in a wide Zone AF frame, which makes it easier to acquire subjects than with [1- point AF].
• Page 145
  Selecting the AF Method Select [ : AF method]. Select an option. Note Without using the menu, you can also set the AF method by pressing the < > button and then the < > button.
• Page 146
  +Tracking: The camera detects and focuses on people’s faces. If a face moves, the AF point [ ] also moves to track the face. With [Eye detection] set to [Enable], you can shoot with the subject’s eyes in focus ( * These instructions apply to the camera with AF operation set to [One-Shot AF] ( ).
• Page 147
  Focus and take the picture. Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps. An orange AF point indicates that the camera could not focus on subjects. Tapping a face for focus Tapping a face or subject to focus on changes the AF point to [ ] and focuses where you…
• Page 148
  Spot AF / 1-point AF / Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. Check the AF point. The AF point (1) will appear. With Zone AF, the Zone AF frame is displayed.
• Page 149
  Focus and take the picture. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. Caution AF points may not track subjects under some shooting conditions when [Servo AF] is used with Zone AF.
• Page 150
  Eye Detection With the AF method set to [ +Tracking], you can shoot with the subject’s eyes in focus. Select [ : Eye detection]. Select [Enable].
• Page 151
  Aim the camera at the subject. An AF point is displayed around their eye. You can also tap the screen to choose an eye. If your selected eye is not detected, an eye to focus on is selected automatically. You can choose an eye or face to focus on with the < ><…
• Page 152
  Magnified View To check the focus when the AF method is other than [ +Tracking], magnify display by approx. 5× or 10× by tapping [ Magnification is centered on the AF point for [Spot AF] or [1-point AF] and on the Zone AF frame for [Zone AF].
• Page 153
  AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
• Page 154
  Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.).

• Page 155: Manual Focus

  Manual Focus If focus cannot be achieved with autofocus, follow the procedure below to focus manually. Set [ : Focus mode] to [ Turn the lens focusing ring to set the approximate focus.

• Page 156
  Magnify the image. Each tap of [ ] switches from normal to 5× to 10× display (and after 10×, back to normal display). (1) AE lock (2) Magnified area position (3) Magnification (approx.) Determine an area to magnify. You can move the magnified area by scrolling with your finger after you tap.
• Page 157
  Take the picture. Note When using non EF-M lenses, set the lens focus mode switch to < > in step 1. Even when focusing manually, you can use Touch Shutter to shoot. MF Peaking Settings (Outline Emphasis) As you shoot, edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection (except in <…
• Page 158
  Set the level and color. Set it as necessary. Caution In magnified view, peaking display is not shown. During HDMI output, peaking display is not shown on equipment connected via HDMI. MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set.

• Page 159: Drive Mode

  Drive Mode Select [ : Drive mode]. Select an option. ] Single shooting When you hold down the shutter button completely, only one shot will be taken. ] High speed continuous When you hold down the shutter button completely, you can shoot continuously at max. approx.

• Page 160
  Caution The maximum continuous shooting speed for [ ) is the value in continuous shooting under these conditions: shooting at room temperature (23°C/73°F) with a fully charged Battery Pack LP-E12 at a 1/1000 sec. or faster shutter speed and maximum aperture value (depending on the lens), with Image Stabilizer off (depending on the lens).

• Page 161: Using The Self-Timer

  Using the Self-Timer Select [ : Drive mode]. Select an option. : Shoot in 10 sec. Remote control shooting is also possible ( : Shoot in 2 sec. Remote control shooting is also possible ( : Shoot continuously in 10 sec. for the specified number of shots Press the <…

• Page 162
  Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. The self-timer lamp blinks faster approx. 2 sec. before the shot. Caution With [ ], the shooting interval may become longer under some shooting…

• Page 163: Remote Control Shooting

  Remote Control Shooting You can shoot remotely by using an optional Wireless Remote Control BR-E1, which pairs via Bluetooth. Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ For operating instructions, refer to the BR-E1 instruction manual.

• Page 164: Metering Mode

  Metering Mode Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. Evaluative metering is set automatically in Basic Zone modes (except in < > mode, which uses center-weighted average metering). Select [ : Metering mode]. Select an option.

• Page 165
  : Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Caution With (evaluative metering), holding down the shutter button halfway when shooting with [One-Shot AF] locks the exposure value (AE lock). With (partial metering), (spot metering), or…

• Page 166: Exposure Compensation

  Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in < >, < >, < >, and < > modes. For details on exposure compensation when < >…

• Page 167
  Note The exposure compensation amount will remain in effect even after you turn off the camera. Can also be set on the shooting functions screen, in [ : Exposure comp./AEB setting] (…

• Page 168: Exposure Lock (Ae Lock)

  Exposure Lock (AE Lock) You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture. It is effective for shooting backlit subjects, etc.

• Page 169
  AE Lock Effects AF Point Selection ( Metering Mode ( Automatic Selection Manual Selection Exposure centered on the AF point in Exposure centered on the selected AF focus is locked. point is locked. AE lock is applied at the center AF point. * When set to [ ] with [ : Focus mode] set to […

• Page 170: Flash Photography

  Flash Photography This chapter describes how to shoot with the built-in flash or an external flash (EL/EX series Speedlites). to the right of page titles indicates functions only available in Creative Zone modes (< >/< >/< >/< >). Caution Flash cannot be used while you are recording movies. AEB is not available in flash photography.

• Page 171: Shooting With The Built-In Flash

  Shooting with the Built-in Flash Shutter Speed and Aperture Value in Flash Photography Shooting With FE Lock Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on the screen, when subjects in daytime shots are backlit, or when shooting under low light. Manually raise the flash.

• Page 172
  Take the picture. When focus is achieved and you press the shutter button completely, the flash will fire at all times. To retract the built-in flash after shooting, push it down with your fingers until it clicks into place. Shooting tips In bright light, decrease the ISO speed.
• Page 173
  Note If the bottom of images is dark when you use super telephoto or large-diameter lenses, consider using an external Speedlite (sold separately,…
• Page 174
  In this case, use FE lock. After setting the flash output for the appropriate subject brightness, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EL/EX series Speedlite. * FE stands for Flash Exposure.
• Page 175
  Press the < > button ( Center the subject in the viewfinder, then press the < > button. A preflash is fired by the flash, and the flash output required for shooting is retained. ] lights up briefly on the screen. Each time you press the <…
• Page 176
  Caution The [ ] icon blinks when subjects are too far away and your shots would be dark. Approach the subject and repeat steps 2–4.

• Page 177: Flash Function Settings

  Flash Function Settings Flash Firing E-TTL II Flash Metering Red-Eye Reduction Slow Synchro Built-in Flash Function Settings External Flash Function Settings External Flash Custom Function Settings Clearing Flash Function Settings/C.Fn Settings Functions of the built-in flash or external EL/EX series Speedlites can be set from menu screens on the camera.

• Page 178
  Select an option.
• Page 179
  Flash Firing Set to [ ] (in Basic Zone or < > modes) to have the flash fire automatically, based on shooting conditions. Set to [ ] to have the flash always fire when you shoot. Select [ ] (in Creative Zone modes) to keep the flash off, or if you will use the AF-assist beam.
• Page 180
  E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Continuous shooting speed for [ ] is slower than when [Evaluative] or [Average] is selected. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene.
• Page 181
  Red-Eye Reduction Set to [Enable] to reduce red-eye by firing the red-eye reduction lamp before firing the flash.
• Page 182
  Slow Synchro You can set the flash-sync speed for flash photography in < > mode or < > mode. ] 1/200-30sec. auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness.
• Page 183
  Built-in Flash Function Settings Flash mode Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. Set to [Manual flash] to specify your preferred flash output in [ flash output]. • Only available in < >/< >/< >…
• Page 184
  Shutter sync. Normally, set to [1st curtain] so that the flash fires immediately after shooting starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Caution When shooting with [2nd curtain], set a shutter speed of 1/60 sec. or slower. For shutter speeds exceeding 1/60 sec., first-curtain synchronization is used automatically even if [2nd curtain] is set.
• Page 185
  exp. comp. Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. Select [ exp.
• Page 186
  Caution Setting [ : Auto Lighting Optimizer] ( ) to an option other than [Disable] may still cause images to look bright even if you set negative flash exposure compensation for darker exposure. If flash exposure compensation is set with a Speedlite (sold separately, ), you cannot set the flash exposure compensation with the camera (Quick Control or external flash function setting).
• Page 187
  External Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. Refer to the instruction manual of your flash unit for details on its functions. Sample display Flash mode Wireless functions/Firing ratio control…
• Page 188
  Flash mode You can select the flash mode to suit your desired flash photography. • [E-TTL II] is the standard mode of EL/EX-series Speedlites that support autoexposure flash photography. • [Manual flash] is a mode for manually configuring the Speedlite’s [Flash output] setting.
• Page 189
  Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
• Page 190
  Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
• Page 191
  Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
• Page 192
  External Flash Custom Function Settings For details on the external Speedlite’s Custom Functions, refer to the Speedlite’s Instruction Manual. Caution With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash). Setting or clearing Speedlite Personal Functions (P.Fn) is not possible from the camera’s [ : External flash func.
• Page 193
  Clearing Flash Function Settings/C.Fn Settings Select [Clear settings]. Select the settings to be cleared. Select [Clear built-in flash set.], [Clear external flash set.], or [Clear ext. flash C.Fn set.]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.

• Page 194: Shooting With Speedlites

  Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras The camera supports flash photography using all functions of EL/EX series Speedlites (sold separately). For instructions, refer to the EL/EX series Speedlite’s Instruction Manual.

• Page 195
  Non-Canon Flash Units Sync speed The camera can synchronize with non-Canon compact flash units at up to 1/200 sec. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Before shooting, confirm that flash sync is performed correctly by taking some test shots at a sync speed of approx.

• Page 196: Shooting And Recording

  Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting ([ ]) tab. • Still Photo Shooting • Movie Recording…

• Page 197: Still Photo Shooting

  Still Photo Shooting to the right of page titles indicates functions only available in Creative Zone modes. • Tab Menus: Still Photo Shooting • Image Quality • Still Image Aspect Ratio • Exposure Compensation/AEB Settings • ISO Speed Settings for Still Photos •…

• Page 198
  • Reverse Display • Viewfinder Display Format • Display Performance • Type of Digest Movie • General Still Photo Shooting Precautions…

• Page 199: Tab Menus: Still Photo Shooting

  Tab Menus: Still Photo Shooting Shooting 1 Image quality Still img aspect ratio Expo.comp./AEB ISO speed settings Auto Lighting Optimizer Highlight tone priority Shooting 2 Flash control Metering mode White balance Custom White Balance WB Shift/Bkt. Color space…

• Page 200
  Shooting 3 (1) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration Lens aberration correction Long exp. noise reduction High ISO speed NR Dust Delete Data Shooting 4 AF operation AF method Eye detection Continuous AF Touch & drag AF settings Focus mode…
• Page 201
  Shooting 5 MF peaking settings AF-assist beam firing Lens electronic MF Shooting 6 Drive mode IS (Image Stabilizer) mode Touch Shutter Review duration Metering timer Expo. simulation…
• Page 202
  Shooting 7 Shooting info. disp. Reverse display VF display format Disp. performance Shooting 8 Movie rec quality Sound recording ISO speed settings Movie Servo AF Auto slow shutter…
• Page 203
  Shooting 9 Auto level Shutter btn function for movies In Basic Zone modes, the following screens are displayed. Note that available setting items vary by shooting mode. Shooting 1 Shooting mode Image quality Still img aspect ratio Flash control…
• Page 204
  Shooting 2 AF method Eye detection Continuous AF Touch & drag AF settings Focus mode Shooting 3 MF peaking settings AF-assist beam firing…
• Page 205
  Shooting 4 Drive mode IS (Image Stabilizer) mode Touch Shutter Review duration Shooting info. disp. Reverse display Shooting 5 VF display format Disp. performance Digest type Retain Creative Assist data…
• Page 206
  Shooting 6 Movie rec quality Sound recording Movie Servo AF Auto level Shutter btn function for movies…

• Page 207: Image Quality

  Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting Select [ : Image quality]. Set the image quality. For RAW images, turn the < > dial, and for JPEGs, press the < >< > keys. Press <…

• Page 208
  RAW images captured by this camera. If a previous version of DPP Ver. 4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it ( ), which will overwrite the previous version.
• Page 209
  Guide to Image Quality Settings Specifications for details on file size, number of shots available, maximum burst, and other estimated values. Maximum Burst for Continuous Shooting The estimated maximum burst is shown on the top of the shooting screen. Note When the maximum burst in still photo shooting is indicated as “99,”…

• Page 210: Still Image Aspect Ratio

  Still Image Aspect Ratio You can change the image’s aspect ratio. Select [ : Still img aspect ratio]. Set the aspect ratio. Select an aspect ratio, then press < >. JPEG images The images will be recorded with the set aspect ratio. RAW Images The images will always be recorded in the [3:2] aspect ratio.

• Page 211
  Aspect ratio 16:9 Note RAW images shot at an aspect ratio of [4:3], [16:9], or [1:1] are displayed during playback with lines indicating the respective aspect ratio, but these lines are not recorded in the image.

• Page 212: Exposure Compensation/Aeb Settings

  Exposure Compensation/AEB Settings You can capture three images at different shutter speeds, aperture values, and ISO speeds, as adjusted by the camera. This is called AEB. * AEB stands for Auto Exposure Bracketing. Select [ : Expo.comp./AEB]. Set the AEB range. Turn the <…

• Page 213
  Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.

• Page 214: Iso Speed Settings For Still Photos

  ISO Speed Settings for Still Photos Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. For details on ISO speed in movie recording, see ISO Speed in Movie Recording.

• Page 215
  Set the ISO speed. Set by pressing the < >< > keys. ISO speed can be set within ISO 100–25600 in 1/3-stop increments. With [AUTO] selected, ISO speed is set automatically. When [AUTO] is selected, pressing the shutter button halfway will display the ISO speed actually set.
• Page 216
  ISO speed guide Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise.
• Page 217
  Maximum [AUTO] ISO Speed For ISO Auto, you can set the maximum ISO speed limit within ISO 400–25600. Select [ ISO speed settings]. Select [Max for Auto]. Select [Max for Auto], then press < >. Select the ISO speed. Select the ISO speed, then press < >.

• Page 218: Auto Lighting Optimizer

  Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. Select [ : Auto Lighting Optimizer]. Set a correction option. Caution Noise may increase and apparent resolution may change, under some shooting conditions.

• Page 219
  Note To enable [ : Auto Lighting Optimizer] to be set even in < > mode, press the < > button in step 2 to clear the checkmark [ ] for [Disable during man expo].

• Page 220: Highlight Tone Priority

  Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [ : Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly.

• Page 221: White Balance Settings

  White Balance Settings White Balance ] Auto White Balance ] Custom White Balance ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.

• Page 222
  (Approx.) Display Mode Color Temperature (K: Kelvin) Auto: Ambience priority 3000–7000 Auto: White priority Daylight 5200 Shade 7000 Cloudy, twilight, sunset 6000 Tungsten light 3200 White fluorescent light 4000 Flash Automatically set* Custom 2000–10000 Color temp. 2500–10000 * Applicable with Speedlites having a color temperature transmission function. Otherwise, it will be fixed to approx.
• Page 223
  ] Auto White Balance With [ ], you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [ ], you can reduce the intensity of the image’s warm color cast. Select [ : White balance].
• Page 224
  Caution Precautions when set to [ The warm color cast of subjects may appear faded. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with […
• Page 225
  ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Shoot a white object.
• Page 226
  Import the white balance data. Use the < >< > keys to select the image captured in step 1, then press < >. Select [OK] to import the data. Select [ : White balance]. Select [ Caution If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
• Page 227
  Note Instead of shooting a white object, you can also shoot a gray card or standard 18% gray reflector (commercially available).
• Page 228
  ] Color Temperature Select [ : White balance]. Set the color temperature. Select [ Turn the < > dial to set the desired color temperature, then press < >. The color temperature can be set from approx. 2500K to 10000K in 100K increments.

• Page 229: White Balance Correction

  White Balance Correction White Balance Correction White Balance Auto Bracketing White balance correction has the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction Select [ : WB Shift/Bkt.].

• Page 230
  Set the white balance correction. Sample setting: A2, G1 Press the < >< > or < >< > keys to move the ■ mark to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark.
• Page 231
  White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount B/A bias ±3 levels In step 2 for White Balance Correction, when you turn the < >…

• Page 232: Color Space

  Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. Select [ : Color space]. Set a color space option. Adobe RGB This color space is mainly used for commercial printing and other professional applications. Recommended when using equipment such as Adobe RGB-compatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers.

• Page 233: Picture Style Selection

  Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. Select [ : Picture Style]. Select a Picture Style.

• Page 234
  Picture Style Characteristics ] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. ] Standard The image looks vivid, sharp, and crisp.
• Page 235
  ] User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). Shots taken with a style you have not customized yet will have the same characteristics as the default [Auto] setting.
• Page 236
  Symbols Icons on the Picture Style selection screen represent [ Strength], [ Fineness], and [ Threshold] for [ Sharpness] as well as [ Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Strength Sharpness Fineness…

• Page 237: Picture Style Customization

  Picture Style Customization Settings and Effects ] Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see ] Monochrome Adjustment. Select [ : Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then press the <…

• Page 238
  Select an option. For details on settings and effects, see Settings and Effects. Set the effect level. Set the value, then press < >. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue.
• Page 239
  Settings and Effects 0: Weak outline emphasis 7: Strong outline emphasis Strength 1: Fine 5: Grainy Sharpness Fineness* 1: Low 5: High Threshold* -4: Low contrast +4: High contrast Contrast -4: Low saturation +4: High saturation Saturation -4: Reddish skin tone +4: Yellowish skin tone Color tone * 1: Indicates the edge thinness that enhancement applies to.
• Page 240
  ] Monochrome Adjustment [ Filter effect] With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper. Or:Orange The blue sky will look slightly darker.
• Page 241
  [ Toning effect] By applying a toning effect, you can create a monochrome image in the selected color. Effective when you want to create memorable images.

• Page 242: Picture Style Registration

  Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, can also be modified here.

• Page 243
  Press < >. With [Picture Style] selected, press < >. Select a base Picture Style. Select the base Picture Style. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). Select an option.
• Page 244
  Set the effect level. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names indicate that you have changed the settings from default values.

• Page 245: Lens Aberration Correction

  Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [ : Lens aberration correction].

• Page 246
  Select [Enable]. Confirm that the name of the attached lens and [Correction data available] are displayed (except when [Diffraction correction] is set). If [Correction data not available] or a [ ] icon is displayed, see Digital Lens Optimizer. Peripheral Illumination Correction Vignetting (dark image corners) can be corrected.
• Page 247
  Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen when shooting, which crops the image a little and slightly lowers the apparent resolution. Applying distortion correction may change the angle of view slightly. When you magnify images, distortion correction is not applied to the images displayed.
• Page 248
  Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual.
• Page 249
  Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Enable].
• Page 250
  General precautions for lens aberration correction Lens aberration correction cannot be applied to existing JPEG images. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
• Page 251
  Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended.

• Page 252: Noise Reduction Features

  Noise Reduction Features Long Exposure Noise Reduction High ISO Speed Noise Reduction Long Exposure Noise Reduction Noise that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. Select [ : Long exp. noise reduction].

• Page 253
  Set a reduction option. ] Auto For images exposed for 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This setting is effective enough in most cases. ] Enable Noise reduction is performed for all images exposed for 1 sec. or longer.
• Page 254
  High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Select [ : High ISO speed NR].
• Page 255
  Caution Precautions when set to [Multi Shot Noise Reduction] If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages.

• Page 256: Appending Dust Delete Data

  Appending Dust Delete Data Preparation Dust Delete Data Acquisition Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically.

• Page 257
  Dust Delete Data Acquisition Select [ : Dust Delete Data].
• Page 258
  Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
• Page 259
  Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera.
• Page 260
  Dust Delete Data Appending Once acquired, Dust Delete Data is appended to still photos captured after that point. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual. File size is essentially unaffected by Dust Delete Data appended to images.

• Page 261: Continuous Af

  Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [ : Continuous AF]. Select [Enable]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.

• Page 262: Touch & Drag Af Settings

  Touch & Drag AF Settings Touch & Drag AF Tapping to Select Subjects for Positioning Method Active Touch Area You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder. Touch &…

• Page 263
  Tapping to Select Subjects for To switch the subject tracked to a different person when several faces are detected with the AF method set to , you can tap the area set in [Active touch area]. Note that this setting is not available with [Touch & drag AF] set to [Enable]. Select [Tap to select subject for Select [On].
• Page 264
  Positioning Method You can set how positions are specified by tapping or dragging. Set [Positioning method]. Absolute The AF point moves to the tapped or dragged position on the screen. Relative The AF point moves in the direction you drag, as much as you drag, no matter where you touch the screen.
• Page 265
  Active Touch Area You can specify the area of the screen used for tap and drag operations. Select [Active touch area]. Set the area that will respond to touch. Note Tapping the screen with [ +Tracking] set displays a round orange frame [ After you lift your finger at the position to move the AF point to, [ ] is displayed and that subject is tracked.

• Page 266: Focus Mode

  Focus Mode You can specify the method of focusing (focus mode) when using EF-M lenses. Select [ : Focus mode]. Select an option. [AF]: Autofocus [MF]: Manual focus…

• Page 267: Af-Assist Beam Firing

  AF-Assist Beam Firing You can enable firing of the camera’s AF-assist beam. Select [ : AF-assist beam firing]. Select an option. ] Enable Enables firing of the AF-assist beam, when needed. ] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam.

• Page 268: Lens Electronic Mf

  Lens Electronic MF For EF-M, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. Select [ : Lens electronic MF]. Select an item. Disable after One-Shot AF After the AF operation, manual focusing adjustment is disabled. Enable after One-Shot AF You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway.

• Page 269: Image Stabilization

  Image Stabilization You can adjust the Image Stabilizer (IS) setting when using IS-equipped EF-M lenses. For details on [ Digital IS], see Movie Digital Select [ : IS (Image Stabilizer) mode]. Select [IS mode].

• Page 270
  Select an option. [Off] Deactivates image stabilization. [On] Camera shake will be corrected. Caution [IS mode] is not displayed for IS-equipped EF or EF-S lenses. If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS mode] to [Off].

• Page 271: Touch Shutter

  Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ ] on the screen’s bottom right. Each time you tap the icon, it will toggle between [ ] and [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be taken.

• Page 272
  Tap the screen to shoot. Tap the face or subject on the screen. On the point you tap, the camera will focus (Touch AF) with the AF method that was set ( When [ ] is set, the AF point turns green when focus is achieved, then the picture is taken automatically.

• Page 273: Review Duration

  Review Duration Set to [Hold] to keep the captured image displayed after you shoot, or set to [Off] if you prefer not to have shots displayed. Select [ : Review duration]. Set a time option. Note When [Hold] is set, images are displayed until the time set in [ : Power saving] elapses.

• Page 274: Metering Timer

  Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display) after it is triggered automatically by an action such as pressing the shutter button halfway. Select [ : Metering timer]. Set a time option.

• Page 275: Exposure Simulation

  Exposure Simulation With exposure simulation, image brightness more closely matches the actual brightness (exposure) of your shots. Select [ : Expo. simulation]. Select an option. [Enable] ( The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly.

• Page 276: Shooting Information Display

  Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot. Customizing Information on the Screen Select [ : Shooting info.

• Page 277
  Select screens. Press the < >< > keys to select screens of information to show on the camera. For information you prefer not to display, press < > to clear the checkmark [ ]. To edit the screen, press the < >…
• Page 278
  Customizing Information in the Viewfinder Select [ : Shooting info. disp.]. Select [VF info/toggle settings]. Select screens. Press the < >< > keys to select information screens to show in the viewfinder. For information you prefer not to display, press < >…
• Page 279
  Edit the screen. Press the < >< > keys to select options to show on the information screen in the viewfinder. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting. Note Add a checkmark to [ ] to display an electronic level as a guideline for ensuring…
• Page 280
  Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [ : Shooting info. disp.]. Select [VF vertical display].
• Page 281
  Select an option. Information is automatically rotated, making it easier to read. Information is not automatically rotated.
• Page 282
  Grid A grid can be displayed on the screen and viewfinder. Select [ : Shooting info. disp.]. Select [Grid display]. Select an option.
• Page 283
  Histogram You can select the content and display size of the histogram. Select [ : Shooting info. disp.]. Select [Histogram disp]. Select an option. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
• Page 284
  Clearing Settings Select [ : Shooting info. disp.]. Select [Reset]. Select [OK].

• Page 285: Reverse Display

  Reverse Display A mirror image can be displayed when you shoot with the screen rotated toward the subject (toward the front of the camera). Select [ : Reverse display]. Select [On]. Select [Off] if you prefer not to reverse display when the screen is rotated toward the front.

• Page 286: Viewfinder Display Format

  Viewfinder Display Format Select [ : VF display format]. Select an option.

• Page 287: Display Performance

  Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. Select [ : Disp. performance]. Select an option.

• Page 288: Type Of Digest Movie

  Type of Digest Movie Both still photos and clips are captured when you shoot in < > mode, but you can specify whether to include the still photos in the resulting digest movie. Set the Mode dial to < >. Select [ : Digest type].

• Page 289
  Select an option. [Include stills] Digest movies include still photos. [No stills] Digest movies do not include still photos.

• Page 290: General Still Photo Shooting Precautions

  General Still Photo Shooting Precautions During Shooting Information Display During Shooting Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.

• Page 291
  Shooting results In magnified view, the shutter speed and aperture value will be displayed in orange. If you take the picture in magnified view, the exposure may not come out as desired. Return to the normal view before taking the picture. Even if you take the picture in magnified view, the image will be captured with the image area of the normal view.
• Page 292
  Information Display For details on the icons displayed for still photo shooting, see Still Photo Shooting Screen. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed. If the [ ] icon is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.

• Page 293: Movie Recording

  Movie Recording For movie recording, set the Mode dial to < >. Caution When switching from still photo shooting to movie recording, check the camera settings again before recording movies. Note You can record movies by pressing the movie shooting button during still photo shooting.

• Page 294: Tab Menus: Movie Recording

  Tab Menus: Movie Recording Shooting 1 Shooting mode Movie rec quality Sound recording Shooting 2 Exposure comp. ISO speed settings Auto Lighting Optimizer Highlight tone priority Auto slow shutter…

• Page 295
  Shooting 3 White balance Custom White Balance WB correction (4) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration Lens aberration correction Shooting 4 Video snapshot Time-lapse movie…
• Page 296
  Shooting 5 AF method Eye detection Touch & drag AF settings Focus mode MF peaking settings Shooting 6 Lens electronic MF Movie Servo AF Shooting 7 Movie self-timer Remote control…
• Page 297
  Shooting 8 IS (Image Stabilizer) mode Digital zoom Auto level Shutter btn function for movies Metering timer Shooting info. disp. Shooting 9 Reverse display VF display format HDMI info disp…

• Page 298: Movie Recording

  Movie Recording Autoexposure Movie Recording Manual Exposure Movie Recording ISO Speed in Manual Exposure Recording Still Photo Shooting Information Display (Movie Recording) Autoexposure Movie Recording Exposure is controlled automatically to suit the brightness. Set the Mode dial to < >. Press <…

• Page 299
  Select [ You can also select [ ] (Movie auto exposure) from [ : Shooting mode]. Focus on the subject. Before recording a movie, focus with AF ( ) or manually ( By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( Pressing the shutter button halfway focuses using the current AF method.
• Page 300
  Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. Note ] is not displayed under the following settings. • With [Video snapshot] set to [Enable] •…
• Page 301
  ISO Speed in [ ] Mode ISO speed is set automatically. For details on ISO speed, see ISO Speed in Movie Recording. Note You can lock the exposure (AE lock) by pressing the < > button ( ). To cancel AE lock, press the <…
• Page 302
  Manual Exposure Movie Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. Set the Mode dial to < >. Press < >. When the screen above is displayed, tap the recording mode icon. Select [ You can also select [ ] (Movie manual exp.) from […
• Page 303
  Set the ISO speed. Tap the ISO speed icon. The ISO speed setting screen is displayed. Set with the < > dial or < >< > keys. Set the shutter speed and aperture value. Press the shutter button halfway and check the exposure level indicator.
• Page 304
  Focus and record the movie. Same as step 4 in Autoexposure Movie Recording. Caution During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds.
• Page 305
  ISO Speed in Manual Exposure Recording You can set the ISO speed manually or select [ ]. For details on ISO speed, see Speed in Movie Recording. Still Photo Shooting Still photos cannot be taken during movie recording. To shoot still photos, turn the Mode dial to switch to another shooting mode.

• Page 306: Movie Recording Quality

  Movie Recording Quality Movie Recording Size 4K Movie Recording Frame Rate (fps: frames per second) Compression Method Movie recording format Cards That Can Record Movies High Frame Rate Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute Movie Recording Time Limit You can set the recording size, frame rate, and compression method in [ : Movie rec…

• Page 307
  Movie Recording Size ] 3840×2160 The movie is recorded in 4K quality. The aspect ratio is 16:9. ] 1920×1080 The movie will be recorded in Full High-Definition (Full HD) quality. The aspect ratio is 16:9. ] 1280×720 The movie is recorded in High-Definition (HD) quality. The aspect ratio is 16:9. Caution If you change the [ : Video system] setting, also set [Movie rec.
• Page 308
  Frame Rate (fps: frames per second) ] 59.94 fps/[ ] 29.97 fps/[ ] 23.98 fps Set for areas using the NTSC TV system, such as North America, Japan, South Korea, and Mexico. ] 50.00 fps/[ ] 25.00 fps Set for areas using the PAL TV system, such as Europe, Russia, China, and Australia. Compression Method ] IPB (Standard) Compresses multiple frames at a time efficiently for recording.
• Page 309
  Cards That Can Record Movies Card performance requirements (Movie recording) for details on cards that can record at each level of movie recording quality. Test cards by recording a few movies to make sure they can record correctly at your specified size ( Caution Format cards before recording 4K movies (…
• Page 310
  High Frame Rate You can record HD movies at a high frame rate of 119.88 fps or 100.00 fps by setting [High Frame Rate] in [ : Movie rec quality] to [Enable]. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 7 min.
• Page 311
  Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. Using SD/SDHC cards formatted with the camera FAT32 formatting is applied when the camera is used to format SD/SDHC cards. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically.
• Page 312
  Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see Recording Time, Bit Rate, and File Size Guidelines. Movie Recording Time Limit When recording 4K/Full HD/HD movies The maximum recording time per movie is 29 min.

• Page 313: Sound Recording

  Sound Recording Sound Recording/Sound-Recording Level Wind Filter Attenuator External Microphone You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ : Sound rec.] to set sound recording functions. Sound Recording/Sound-Recording Level Auto The sound-recording level is adjusted automatically.

• Page 314
  Wind Filter Set to [Auto] for automatic reduction of audio distortion in windy outdoor scenes. Only activated when the camera’s built-in microphone is used. When the wind filter function takes effect, part of the low bass sounds will also be reduced. Attenuator This feature suppresses sound distortion caused by loud noises.
• Page 315
  External Microphone If an external microphone equipped with a miniature stereo plug (3.5 mm diameter) is connected to the camera’s external microphone IN terminal, the external microphone will be given the priority. Using a microphone such as Directional Stereo Microphone DM-E1 (sold separately) is recommended.

• Page 316: Video Snapshots

  Video Snapshots Configuring Video Snapshot Settings Creating Video Snapshot Albums Adding to an Existing Album Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event.

• Page 317
  Configure [Album settings]. Select [Create a new album]. Read the message and select [OK]. Configure [Playback time]. Specify playback time per video snapshot. Configure [Playback effect]. This setting determines how fast albums are played back.
• Page 318
  Configure [Show confirm msg]. Select [Enable]. Check the required recording time. The time required to record each video snapshot is indicated (1), based on the playback time and effect. Close the menu. Press the < > button to close the menu. A blue bar is displayed to indicate the recording time (2).
• Page 319
  Creating Video Snapshot Albums Record the first video snapshot. Press the movie shooting button to start recording. The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops automatically. A confirmation message is displayed ( Save as a video snapshot album.
• Page 320
  Record your next video snapshots. Repeat step 1 to record the next video snapshot. Select [ Add to album]. To create another album, select [ Save as a new album]. Repeat step 3 as needed. Stop recording video snapshots. Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable].
• Page 321
  Options in steps 2 and 3 Option Description Saves the clip as the first video snapshot in an album. Save as album (step 2) Adds the current video snapshot to the album recorded most Add to album (step 3) recently. Creates a new album and saves the clip as the first video snapshot.
• Page 322
  Adding to an Existing Album Select [Add to existing album]. In step 2 of Configuring Video Snapshot Settings, select [Add to existing album]. Select an existing album. Use the < >< > keys to select an existing album, then press <…
• Page 323
  Record a video snapshot. Record the video snapshot, referring to Creating Video Snapshot Albums. Caution You cannot select an album shot with another camera. Caution General video snapshot precautions No sound is recorded when [Playback effect] is set to [1/2x speed] or [2x speed]. Recording time per video snapshot is only approximate.

• Page 324: Time-Lapse Movies

  Time-Lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.

• Page 325
  Select a scene. Select a scene to suit the shooting situation. For greater freedom when setting the shooting interval and number of shots manually, select [Custom]. Set the shooting interval. Select [Interval/shots]. Select [Interval] (sec.). Use the < >< > keys to set a value, then press <…
• Page 326
  Set the number of shots. Select [No. of shots]. Use the < >< > keys to set a value, then press < >. Refer to [ : Time required] and [ : Playback time] as you set the number. When [Custom] is set Select the digit.
• Page 327
  Note With [Scene *], available intervals and numbers of shots are restricted, to suit the type of scene. For details on cards that can record time-lapse movies, see Card performance requirements (Movie recording). If the number of shots is set to 3600, the time-lapse movie will be approx.
• Page 328
  Set [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
• Page 329
  Set [Screen auto off]. Disable Even during time-lapse movie recording, the image will be displayed. (The screen turns off only at the time of shooting.) Note that the screen will turn off when approx. 30 min. elapse after the shooting started. Enable Note that the screen will turn off when approx.
• Page 330
  Check the settings. (1) Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. (2) Playback time Indicates the movie recording time (time required to play back the movie) when creating the time-lapse movie in 4K movie or Full HD movie from the still photos taken with the set intervals.
• Page 331
  Record the time-lapse movie. Press the < > button and check again the “Time required (1)” and “Interval (2)” displayed on the screen. Press the movie shooting button to start time-lapse movie recording. AF will not work during time-lapse movie recording. “…
• Page 332
  Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. : Time-lapse movie] cannot be set to an option other than [Disable] when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected.
• Page 333
  During time-lapse movie recording, the lens’s Image Stabilizer will not operate. Time-lapse movie recording ends if the power switch is set to < >, and the setting changes to [Disable]. Even if a flash is used, it will not fire. The following operations cancel standby for time-lapse movie recording and switch the setting to [Disable].
• Page 334
  Note You can use Wireless Remote Control BR-E1 (sold separately) to start and stop the time-lapse movie recording. Prepare by setting [ : Remote control] to [Enable]. With Wireless Remote Control BR-E1 • First, pair the BR-E1 with the camera ( Camera Status/ <…

• Page 335: Movie Servo Af

  Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. Select [ : Movie Servo AF].

• Page 336
  Select [Enable]. With [Enable] set • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen.
• Page 337
  Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When recording with a higher aperture value. •…

• Page 338: Digital Zoom

  Digital Zoom With the recording size set to [ ] (NTSC) or [ ] (PAL), you can shoot with approx. 3–10× digital zoom. Select [ : Digital zoom]. Select an option. Select the amount to zoom, then press < >. Press the <…

• Page 339
  Use digital zoom. Press the < > button. The digital zoom bar will appear. Press the < > key to zoom in or press the < > key to zoom out. Pressing the shutter button halfway focuses with [1-point AF] (fixed at center).

• Page 340: Movie Auto Level

  Movie Auto Level Auto leveling helps keep movies straight during recording. Caution Set [ Digital IS] in [ : IS (Image Stabilizer) mode] to [Disable]. Select [ Auto level]. Select an option.

• Page 341: Shutter Button Function For Movies

  Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Select [ : Shutter btn function for movies].

• Page 342
  Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Displayed with the Mode dial set to < >. Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely.

• Page 343: Movie Self-Timer

  Movie Self-Timer Movie recording can be started by the self-timer. Select [ : Movie self-timer]. Select an option. Record the movie. After you press the movie shooting button or tap [ ], the camera beeps and displays the number of seconds left before recording. Note To cancel the self-timer, either tap the screen or press <…

• Page 344: Movie Digital Is

  Movie Digital IS The camera’s Movie digital IS feature reduces camera shake as movies are recorded. Movie digital IS can provide effective stabilization even when your lens is not equipped with Image Stabilizer. When using a lens equipped with Image Stabilizer, set the lens’s Image Stabilizer switch to <…

• Page 345
  The wider the angle of view, the more effective the image stabilization will be. The narrower the angle of view, the less effective the image stabilization will be. Consider setting to [Disable] when using TS-E, fish-eye, or non-Canon lenses. Effects of Movie digital IS are not applied to images during magnified display.
• Page 346
  Combination IS-compatible lens, which will combine optical and digital image stabilization by the lens and camera. For details on lenses compatible with Combination IS, visit the Canon website. “+” is added to the Movie digital IS icon ( ) when a lens compatible with Combination IS is used.

• Page 347: Miniature Effect Movies

  Miniature Effect Movies By blurring image areas outside a selected area, you can record movies with a miniature model effect applied. You can also choose a playback speed before recording to create movies that resemble miniature scenes with people and objects moving in fast motion. Note that sound is not recorded.

• Page 348
  Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the < > button or tap [ ] in the lower right of the screen. To switch between vertical and horizontal scene frame orientation, tap ] in the lower left of the screen.
• Page 349
  Record the movie. Press the movie shooting button. Speed and playback time (for a 1-minute movie) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. Caution To make people and objects in the scene move quickly during playback, select ], [ ], or [ ] before recording the movie.

• Page 350: Other Menu Functions

  Other Menu Functions…

• Page 351
  Shooting mode Available options include autoexposure and manual exposure movie recording. Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually.
• Page 352
  Auto slow shutter You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ ] recording mode. Applies when the frame rate of the movie recording size is •…
• Page 353
  White balance For details on white balance, see White Balance Settings. Custom White Balance For details on custom white balance, see ] Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection.
• Page 354
  Lens electronic MF For details on lens electronic MF, see Lens Electronic Remote control By setting to [Enable], you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately). First, pair the BR-E1 with the camera ( With Wireless Remote Control BR-E1 For normal movie recording, set the release timing/movie shooting switch to <…
• Page 355
  Reverse display For details on reverse display, see Reverse Display. VF display format For details on the viewfinder display format, see Viewfinder Display Format. HDMI info disp You can configure information display for image output via an HDMI cable. • With info The image, shooting information, AF points, and other information is shown on the other device via HDMI.

• Page 356: General Movie Recording Precautions

  General Movie Recording Precautions Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you record something that has fine detail, moire or false colors may result.

• Page 357
  Recording and image quality If the attached lens has an Image Stabilizer and you set the Image Stabilizer switch to < >, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. This will consume battery power, and it may reduce the total movie recording time under some shooting conditions.
• Page 358
  Note Notes for movie recording Each time you record a movie, a new movie file is created on the card. The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. To enable starting/stopping movie recording by pressing the shutter button completely, set [Fully-press] for [ : Shutter btn function for movies] to [Start/ stop mov rec].

• Page 359: Playback

  Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback ([ ]) tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.

• Page 360
  • AF Point Display • HDMI HDR Output…

• Page 361: Tab Menus: Playback

  Tab Menus: Playback Playback 1 Protect images Erase images Rotate stills Change mov rotate info Rating Playback 2 Print order Photobook Set-up…

• Page 362
  Playback 3 Creative Assist Creative filters Red-eye correction Resize Cropping Create album Playback 4 Slide show Set image search conditions View from last seen Image jump w/…
• Page 363
  Playback 5 Playback information display AF point disp. HDMI HDR output…

• Page 364: Image Playback

  Image Playback Single-Image Display Shooting Information Display Single-Image Display Switch to playback. Press the < > button. The last image captured or played back is displayed.

• Page 365
  Browse images. To play back images starting with the most recent, press the < > key. To play back images starting with the first captured image, press the < > key. Each time you press the < > button, the display will change. No information Basic information display Shooting information display…
• Page 366
  Note Lines indicating the image area are shown on RAW images captured with [ : Still img aspect ratio] set to an option other than [3:2] ( If the search conditions are set with [ : Set image search conditions] ( ), only the filtered images will be displayed.

• Page 367: Index Display (Multiple-Image Display)

  Index Display (Multiple-Image Display) Switch to the index display. During image playback, press the < > button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Pressing the < > button again switches display from 9 images to 36, and then to 100. Pressing the <…

• Page 369
  Browse images. Press the < >< >< >< > keys to move the orange frame for image selection. Press < > in the index display to display the selected image in the single-image display. Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices.
• Page 370
  Jump display Index display Magnified view Note You can also magnify display by double-tapping with one finger.

• Page 371: Magnified Image Display

  Magnified Image Display Magnify the image. During image playback, press the < > button. The magnified view will appear. The magnified area position (1) will be displayed in the lower right of the screen. Each press of the < > button magnifies display. Each press of the <…

• Page 372
  Scroll the image. Press the < >< >< >< > keys to scroll around the image. To cancel the magnified view, press the < > button or tap […

• Page 373: Movie Playback

  Movie Playback Switch to playback. Press the < > button. Select a movie. Use the < >< > keys to select a movie to play. In single-image display, the [ ] icon displayed in the upper left of the screen indicates a movie. In index display, perforations at the left edge of a thumbnail indicate a movie.

• Page 374
  In single-image display, press < >. Select [ (1) Speaker The movie will start playing back. You can pause playback and display the movie playback panel by pressing < >. Press it again to resume the playback. Pressing the < >…
• Page 375
  Movie playback panel Item Playback Operations Play Pressing < > toggles between playback and stop. Adjust the slow motion speed with the < >< > keys. The slow motion Slow motion speed is indicated in the upper right of the screen. Skip backward Skips backward approx.
• Page 376
  Movie playback panel (video snapshot albums and digest movies) Item Playback Operations Play Pressing < > toggles between playback and stop. Adjust the slow motion speed with the < >< > keys. The slow motion Slow motion speed is indicated in the upper right of the screen. Displays the first frame of the previous video snapshot.

• Page 377: Editing A Movie’s First And Last Scenes

  Editing a Movie’s First and Last Scenes In single-image display, press < >. Select [ The movie will start playing back. Press < > to pause the movie. On the movie playback panel, select […

• Page 378
  Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press the < >< > keys to go back or forward one frame (or video snapshot) at a time. Keep holding down the < >…
• Page 379
  Save. Select [ ] (1). The save screen will appear. To save it as a new file, select [New file], or to save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file. 4K movies are converted to Full HD movies before compression.

• Page 380: Frame Extraction From 4K Movies Or 4K Time-Lapse Movies

  Frame Extraction from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3 megapixel (3840 × 2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. Switch to playback.

• Page 381
  Press < > to pause the movie. The movie playback panel will appear. Select a frame to grab. Use the movie playback panel to select the frame to grab as a still image. For movie playback panel instructions, see Movie Playback Panel.
• Page 382
  Save. Select [OK] to save the current frame as a JPEG still image. Select the image to display. Check the destination folder and image file number. Select [View original movie] or [View extracted still image]. Caution Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, HD movies, or with 4K movies or 4K time-lapse movies from a different camera.

• Page 383: Digest Movie Editing

  Digest Movie Editing Individual chapters (clips) recorded in < > mode can be erased. Be careful when erasing clips, because they cannot be recovered. Switch to playback. Press the < > button. Select a digest movie. Use the < >< >…

• Page 384
  Press < > to pause the digest movie. The movie playback panel will appear. Select a clip. Use [ ] or [ ] to select a clip. Select [ ]. Select [OK]. The clip is erased, and the digest movie is overwritten.
• Page 385
  Note Video snapshot albums can also be edited. However, albums created with [ Create album] cannot be edited. For other instructions on using the movie playback panel for digest movies, see Movie Playback Panel (Video Snapshot Albums and Digest Movies).

• Page 386: Playback On A Tv Set

  Playback on a TV Set You can view your shots and movies on a TV by connecting the camera to a TV with a commercially available HDMI cable (not exceeding 2.5 m/8.2 ft., with a Type D terminal on the camera end). If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).

• Page 387
  Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera.

• Page 388: Protecting Images

  Protecting Images Protecting a Single Image Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Protecting a Single Image Select [ : Protect images]. Select [Select images].

• Page 389
  Protect the image. Press < > to protect the selected image, after which it will be labeled with a < > icon (1) at the top of the screen. To cancel protection and clear the < > icon, press < >…
• Page 390
  Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ : Protect images].
• Page 391
  Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Protect images], all the images in the folder or on the card will be protected.

• Page 392: Erasing Images

  Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch.

• Page 393
  Erase the images. JPEG or RAW images or movies Select [Erase]. RAW+JPEG images Select an option.
• Page 394
  Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. Select [ : Erase images]. Select [Select and erase images]. Select an image. Use the < ><…
• Page 395
  Erase the images.
• Page 396
  Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Specify the range of images. Select the first image (start point).
• Page 397
  Erase the images. Select [OK].
• Page 398
  Erasing All Images in a Folder or on a Card When you select [All images in folder] or [All images on card] in [ : Erase images], all the images in the folder or on the card will be erased. If the search conditions are set with [ : Set image search conditions] ( ), the…

• Page 399: Rotating Still Photos

  Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. Select [ : Rotate stills]. Select an image. Use the < >< > keys to select an image to rotate. Rotate the image. Each time you press <…

• Page 400
  Note If you set [ : Auto rotate] to [On ) before taking pictures, you need not rotate the image with this function. If the rotated image is not displayed rotated during playback, set [ : Auto rotate] to [On…

• Page 401: Changing Movie Orientation Information

  Changing Movie Orientation Information You can manually change movie orientation information (which determines which side is up). Select [ : Change mov rotate info]. Select a movie. Use the < >< > keys to select a movie with orientation information to change.

• Page 402
  Press < >. As you watch the image orientation icon in the upper left of the screen, press < > to specify which side is up. Note Orientation information of video snapshot albums cannot be changed. Movies are played horizontally on the camera, regardless of the [ : Add rotate info] setting (…

• Page 403: Rating Images

  Rating Images Rating a Single Image Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( ). This function is called rating. * Rating images can help you organize them. Rating a Single Image Select [ : Rating].

• Page 404
  Select the image to be rated. Use the < >< > keys to select an image to rate. Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Use the < ><…
• Page 405
  Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Specify the range of images. Select the first image (start point).
• Page 406
  Rate the image. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
• Page 407
  Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
• Page 408
  Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.

• Page 409: Printing

  Printing All operations in direct printing are performed on the camera, as you view instructions on the camera. Prepare the printer. For details, refer to the printer instruction manual. Connect the camera to the printer with an interface cable (sold separately).

• Page 410
  Turn the camera on. Some printers may beep. The image is displayed, along with a printer connection icon in the upper left of the screen. Select the image to be printed. Confirm that a printer connection icon (1) is displayed in the upper left of the screen.
• Page 411
  Note The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. You can also print RAW images captured with this camera. When using a battery to power the camera, make sure it is fully charged. Turn off the camera and printer before disconnecting the cable, and hold the cable by the plug when disconnecting it.

• Page 412: Print Ordering (Dpof)

  Print Ordering (DPOF) Setting Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc.

• Page 413
  Set the options as desired. Set [Print type], [Date], and [File No.] options. Standard Prints one image on one sheet. Multiple thumbnail images are printed on one Index Print type sheet. Both Prints both the standard and index prints. Date [On] imprints the recorded date of the captured image.
• Page 414
  Caution If you print an image with a large image size using the [Index] or [Both] setting ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be printed, depending on the print type setting and printer.
• Page 415
  Selecting Images for Printing Sel.Image Select and specify the images individually. Press the < > button to save the print order to the card. • Standard/Both (1) Quantity (2) Total images selected Press < > to print a copy of the displayed image. By pressing the < ><…
• Page 416
  Multiple • Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. •…
• Page 417
  Caution RAW images or movies cannot be specified for printing. Note that RAW images or movies will not be specified for printing even if you specify all images with [Multiple]. When using a PictBridge-compatible printer, do not specify more than 400 images for one print order.

• Page 418: Photobook Set-Up

  Photobook Set-up Specifying Images Individually Specifying the Image Range for a Photobook Specifying All Images in a Folder or Card You can specify up to 998 images for printing in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder.

• Page 419
  Select the image to be specified. Use the < >< > keys to select an image for the photobook, then press < >. To select other images to be specified for a photobook, repeat step 3.
• Page 420
  Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. Select [Multiple]. Select [Multiple] in [ : Photobook Set-up].
• Page 421
  Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
• Page 422
  Specifying All Images in a Folder or Card You can specify all the images in a folder or on a card at once for a photobook. All images in the folder or on the card are specified for the photobook when you select [All images in folder] or [All images on card] in the [Multiple] option for [ Photobook Set-up].

• Page 423: Creative Assist

  Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. Select [ : Creative Assist]. Select an image. Use the < >< > keys to select images to process, then press < >.

• Page 424
  Select an effect. Use the < >< > keys to select the effect. By selecting [Preset] and pressing < >, you can choose [VIVID], [SOFT], or other preset effects. [AUTO1], [AUTO2], and [AUTO3] are effects recommended by the camera based on image conditions. You can select effects such as [Brightness] or [Contrast] by pressing <…
• Page 425
  To reset the effect, press the < > button. To confirm the effect, press the < > button. Select [OK] to save the image.

• Page 426: Creative Filters

  Creative Filters You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. Select [ : Creative filters]. Select an image.

• Page 427
  Adjust the filter effect. Adjust the filter effect, then press < >. For [Miniature effect], turn the < > dial or use the < >< > keys to move the white frame enclosing the area to keep in sharper focus, then press < >.
• Page 428
  Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.

• Page 429: Red-Eye Correction

  Red-Eye Correction Automatically corrects relevant portions of images affected by red-eye. The image can be saved as a separate file. Select [ : Red-eye correction]. Select an image with the < >< > keys. After image selection, either tap [ ] or press <…

• Page 430
  Caution Some images may not be corrected accurately.

• Page 431: Resizing

  Resizing You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG / / images. JPEG and RAW images cannot be resized. Select [ : Resize].

• Page 432
  Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4. Note For details on image sizes of resized images, see Still Photo Pixel…

• Page 433: Cropping

  Cropping You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. Select [ : Cropping]. Select an image. Use the < ><…

• Page 434
  Set the cropping frame. Press < > to display the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Use the < > or < > button to resize the cropping frame. The smaller the cropping frame, the more magnified the cropped image will look.
• Page 435
  Check the image area to be cropped. Use the < > dial to select < >. The image area to crop is displayed. Save. Use the < > dial to select < >. Select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK].

• Page 436: Album Creation

  Album Creation You can rearrange, delete, or play back the video snapshots in an album. Select [ : Create album]. Select an album to edit. Press < > to add a checkmark [ ]. After selection, press the < > button.

• Page 437
  Select an editing option. Option Description Use the < >< > keys to select a video snapshot to Rearrange move, then press < >. Use the < >< > keys to video snapshots move it, then press < >. Use the < ><…
• Page 438
  Save. To play an album with background music, use [Background music] to select the music ( To check your editing, select [Preview]. Selecting [Save] saves the edited album as a new album. Caution Video snapshot albums can only be edited once.
• Page 439
  Selecting Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). Select [Background music]. Set [Background music] to [On]. Select the background music. Use the < ><…

• Page 440: Slideshows

  Slideshows You can play back the images on the card as an automatic slideshow. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slideshow, filter the images with [ : Set image search conditions] ( Select […

• Page 441
  Set the playback as desired. Select [Set up]. Set the [Display time], [Repeat] (repeated playback), and [Transition effect] (effect when changing images) settings for the still photos. To play background music, use [Background music] to select the music ( After completing the settings, press the < >…
• Page 442
  Transition effect Background music Start the slideshow. Select [Start]. After [Loading image…] is displayed, the slideshow will start. Exit the slideshow. To exit the slideshow and return to the setting screen, press the < > button.
• Page 443
  Note To pause the slideshow, press < >. During pause, [ ] will be displayed in the upper left of the screen. Press < > again to resume the slideshow. During the automatic playback of still photos, you can press the < >…

• Page 444: Setting Image Search Conditions

  Setting Image Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slideshow, erase, and apply other operations to filtered images.

• Page 445
  Set the search conditions. Use the < >< > keys to select an option. Set with the < >< > keys or the < > button. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the <…
• Page 446
  Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back. When the images are filtered for display, the screen will have an outer yellow frame (2). Clearing the Search Conditions Access the screen in step 2, then press the <…

• Page 447: Resuming From Previous Playback

  Resuming from Previous Playback Select [ : View from last seen]. Select an option. [Enable]: Playback resumes from the last image displayed (unless you have just finished shooting). [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.

• Page 448: Browsing Images With The Dial

  Browsing Images with the Dial In single-image display, you can turn the < > dial to jump through the images forward or backward according to the jump method set. Select [ : Image jump w/ Select the jump method. Note With [Jump images by the specified number], you can turn the <…

• Page 449
  Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set. Note To search images by shooting date, select [ : Display by date]. To search images by folder, select [ : Display by folder].

• Page 450: Playback Information Display

  Playback Information Display You can specify screens and accompanying information displayed during image playback. Select [ : Playback information display]. Add a checkmark [ ] next to the number of screens to display. Use the < >< > keys to select numbers, then press < >…

• Page 451
  Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. [Brightness] display This histogram is a graph showing the distribution of the image’s brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level.
• Page 452
  [RGB] display This histogram is a graph showing the distribution of each primary color’s brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color’s brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level.

• Page 453: Af Point Display

  AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. Select [ : AF point disp.]. Select [Enable].

• Page 454: Hdmi Hdr Output

  HDMI HDR Output You can view RAW images in HDR by connecting the camera to an HDR TV. Select [ : HDMI HDR output]. Select [On]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.

• Page 455: Wireless Features

  Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.

• Page 456
  • Wireless Communication Status…

• Page 457: Tab Menus: Wireless Settings

  Tab Menus: Wireless Settings Wireless Settings 1 Wi-Fi/Bluetooth connection Airplane mode Wi-Fi settings Bluetooth settings Nickname GPS settings Wireless Settings 2 Reset communication settings…

• Page 458
  Caution Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. The camera cannot be connected via Wi-Fi if there is no card in the camera (except for [ ]).

• Page 459: Wi-Fi/Bluetooth Connection

  Wi-Fi/Bluetooth Connection Select [ : Wi-Fi/Bluetooth connection]. Select an option for the camera to connect to. Connect to smartphone ( Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones”…

• Page 460
  Upload to Web service ( Images can be sent directly from the camera to the image.canon cloud service for Canon customers after you complete member registration (free of charge). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services.

• Page 461: Connecting To A Smartphone

  Connecting to a Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Installing Camera Connect on a Smartphone Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Camera Connect Functions Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Wi-Fi Connection without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera…

• Page 462
  Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
• Page 463
  Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
• Page 464
  Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Steps on the camera (1) Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. Select [Add a device to connect to].
• Page 465
  Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
• Page 466
  Select [Pair via Bluetooth]. Press < > to start pairing. To pair with a different smartphone after pairing with one initially, select [OK] on the screen shown above.
• Page 467
  Steps on the smartphone (1) Start Camera Connect. Tap the camera for pairing. In Android, go to Steps on the camera (2). Tap [Pair] (iOS only).
• Page 468
  Steps on the camera (2) Select [OK]. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen.
• Page 469
  Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Changing or Deleting Connection Settings. Bluetooth connection consumes battery power even after the camera’s auto power off is activated.
• Page 470
  Steps on the smartphone (2) Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see Camera Connect Functions. When a Wi-Fi connection is established, the screen for the selected function will appear.
• Page 471
  [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
• Page 472
  Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Effects can be applied to RAW images from a smartphone (Creative Assist). Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( Bluetooth remote controller…
• Page 473
  Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi and browse images on the camera or perform other operations.
• Page 474
  Canceling the Pairing Cancel pairing with a smartphone as follows. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, press the < >< > keys to switch the screen. Select [Edit/delete device].
• Page 475
  Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ]. Select [Delete connection information]. Select [OK]. Clear the camera information on the smartphone. In the smartphone’s Bluetooth setting menu, clear the camera information registered on the smartphone.
• Page 476
  Wi-Fi Connection without Using Bluetooth Steps on the camera (1) Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, press the < >< > keys to switch the screen. Select [Add a device to connect to].
• Page 477
  Select an option. If Camera Connect is already installed, select [Do not display]. Select [Connect via Wi-Fi]. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. No password is displayed or required if you set [Password] to [None] in [Wi-Fi settings] (…
• Page 478
  Note By selecting [Switch network] in step 6, you can establish a Wi-Fi connection via an access point (…
• Page 479
  Steps on the smartphone Operate the smartphone to establish a Wi-Fi connection. Smartphone’s screen (sample) Activate the smartphone’s Wi-Fi function, then tap the SSID (network name) checked in step 6 in Steps on the camera (1). For the password, enter the password checked in step 6 in Steps on the camera (1).
• Page 480
  Steps on the camera (2) Select [OK]. To specify viewable images, press the < > button. Configure as described in Settings to Make Images Viewable from Smartphones, starting in step 5. The main window of Camera Connect will be displayed on the smartphone.
• Page 481
  Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [ : Wi-Fi settings]. Select [Send to smartphone after shot]. Set [Auto send] to [Enable].
• Page 482
  Set [Size to send]. Take the picture.
• Page 483
  Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. Switch to playback. Press the < > button. Select [ Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection.
• Page 484
  (1) Sending images individually Select an image to send. Use the < > dial or < >< > keys to select an image to send, then press < >. To select the image from index display, press the < > button. Select [Send img shown].
• Page 485
  (2) Sending multiple selected images Press < >. Select [Send selected].
• Page 486
  Select images to send. Use the < > dial or < >< > keys to select an image to send, then press < >. You can press the < > button to select the images from 3-image display. To return to the single-image display, press the < >…
• Page 487
  Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
• Page 488
  (3) Sending a specified range of images Press < >. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. You can press the < >…
• Page 489
  Confirm the range. Press the < > button. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
• Page 490
  (4) Sending all images on the card Press < >. Select [Send all card].
• Page 491
  Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
• Page 492
  (5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. Press < >. Select [Send all found].
• Page 493
  Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
• Page 494
  Ending image transfer Sending images from the camera when paired via Bluetooth (Android devices only) Press the < > button on the image transfer screen. Select [OK] to end image transfer and the Wi-Fi connection. Sending images from the camera over a Wi-Fi connection Press the <…
• Page 495
  Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced.
• Page 496
  Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap [ ]. On the [ Wi-Fi on] screen, select [Disconnect,exit]. If the [ Wi-Fi on] screen is not displayed, select [ : Wi-Fi/Bluetooth connection]. Select [Disconnect,exit], then select [OK] on the confirmation screen.
• Page 497
  Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to smartphone]. If the history ( ) is displayed, press the < >< > keys to switch the screen.
• Page 498
  Select a smartphone. Select the name of the smartphone on which you want to make the images viewable. Select [Viewable imgs].
• Page 499
  Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
• Page 500
  [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images.
• Page 501
  Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. With a Wi-Fi connection to a smartphone established, certain functions are unavailable.

• Page 502: Connecting To A Computer Via Wi-Fi

  Connecting to a Computer via Wi-Fi Operating the Camera Using EOS Utility Sending Images on the Camera Automatically This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection.

• Page 503
  Select [ Remote control (EOS Utility)]. If the history ( ) is displayed, press the < >< > keys to switch screens. Select [Add a device to connect to]. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. No password is displayed or required if you set [Password] to [None] in [Wi-Fi settings].
• Page 504
  Steps on the computer (1) Select the SSID, then enter the password. Computer’s screen (sample) On the computer’s network setting screen, select the SSID checked in step 4 in Steps on the camera (1). For the password, enter the password checked in step 4 in Steps on the camera (1).
• Page 505
  Steps on the camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected.
• Page 506
  Steps on the computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. Click [Connect]. Select the camera to connect to, then click [Connect].
• Page 507
  Steps on the camera (3) Establish a Wi-Fi connection. Select [OK].
• Page 508
  [ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer.
• Page 509
  Sending Images on the Camera Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the computer (1) Connect the computer and access point and start Image Transfer Utility 2.
• Page 510
  Select [OK]. Connect to an access point via Wi-Fi. Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see Wi-Fi Connection via Access Points. Select the computer to pair the camera with.
• Page 511
  Steps on the computer (2) Pair the camera and computer. Select the camera, then click [Pairing]. Steps on the camera (2) Select [OK]. Select [Image sending options].
• Page 512
  Select what to send. If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen. After the settings are complete, turn the camera off. Images on the camera are automatically sent to the active computer when you turn the camera on within range of the access point.

• Page 513: Connecting To A Printer Via Wi-Fi

  Connecting to a Printer via Wi-Fi Image Printing Print Settings This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. Select [ : Wi-Fi/Bluetooth connection].

• Page 514
  Select [Add a device to connect to]. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. No password is displayed or required if you set [Password] to [None] in [Wi-Fi settings] ( Set up the printer.
• Page 515
  Select the printer. In the list of detected printers, select the printer to connect to via Wi-Fi. If your preferred printer is not listed, selecting [Search again] may enable the camera to find and display it. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
• Page 516
  Image Printing Printing images individually Select the image to be printed. Use the < > dial or < >< > keys to select an image to print, then press < >. To select the image from index display, press the < >…
• Page 517
  Print the image. For the print setting procedures, see Print Settings. Select [Print], then [OK] to start printing.
• Page 518
  Printing according to specified image options Press < >. Select [Print order]. Set the printing options. For the print setting procedures, see Print Ordering (DPOF). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
• Page 519
  Select [Print]. [Print] can be selected only when an image is selected and the printer is ready to print. Configure [Paper settings] ( Print the image. When [OK] is selected, printing starts. Caution Shooting is not possible while connected to a printer via Wi-Fi. Movies cannot be printed.
• Page 520
  Note When you use a battery to power the camera, make sure it is fully charged. It may take some time until printing starts after you select [Print], depending on file size and image quality. To stop printing, press < >…
• Page 521
  Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print settings screen Sets date or file number printing ( Sets the printing effects ( Sets the number of copies to print ( Sets the print area ( Sets the paper size, type, and layout (…
• Page 522
  Paper settings Select [Paper settings]. [ ] Setting the paper size Select the size of the paper in the printer.
• Page 523
  [ ] Setting the paper type Select the type of the paper in the printer. [ ] Setting the page layout Select the page layout. Caution If the image’s aspect ratio is different from the printing paper’s aspect ratio, the image may be cropped significantly when you print it as a borderless print.
• Page 524
  ] Setting printing effects (image optimization) Select [ Select printing effects. Caution ISO speeds may be misidentified in shooting information printed for images shot at an expanded ISO speed (H). [Default] in printing effects and other options refers to default settings determined by the printer manufacturer.
• Page 525
  Cropping the image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. Select [Cropping] on the print setting screen. Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed.
• Page 526
  Caution Depending on the printer, the cropped image area may not be printed as you specified. The smaller the cropping frame, the lower the resolution at which images are printed. Note Handling printer errors If printing does not resume after you resolve a printer error (such as no ink or paper) and select [Continue], use buttons on the printer.

• Page 527: Sending Images To A Web Service

  A computer or smartphone with a browser and internet connection is required. You will need to enter an email address used on your computer or smartphone. For instructions on how to use image.canon services and details on countries and regions where it is available, visit the image.canon site (https://image.canon/).

• Page 528
  Select [I Agree]. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points. Enter your email address. Enter your email address, then select [OK].
• Page 529
  Enter a four-digit number. Enter a four-digit number of your choice, then select [OK]. Select [OK]. The [ ] icon changes to […
• Page 530
  Steps on the computer or smartphone Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
• Page 531
  Steps on the camera (2) Add “image.canon” as a destination. Select [ image.canon is now added.
• Page 532
  Sending Images Images can be sent to image.canon. Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services. Connecting to image.canon via Wi-Fi Select [ : Wi-Fi/Bluetooth connection].
• Page 533
  Sending images individually Select an image to send. Use the < > dial or < >< > keys to select an image to send, then press < >. To select the image from index display, press the < > button. Select [Send img shown].
• Page 534
  Sending multiple selected images Press < >. Select [Send selected]. Select images to send. Use the < > dial or < >< > keys to select an image to send, then press < >. You can press the < > button to select the image from 3-image display.
• Page 535
  Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
• Page 536
  Sending a specified range of images Specify the range of images to send all the images in the range at once. Press < >. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point). Images will be selected and [ ] will appear.
• Page 537
  Confirm the range. Press the < > button. Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
• Page 538
  Sending all images on the card Press < >. Select [Send all card].
• Page 539
  Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
• Page 540
  Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. Press < >. Select [Send all found].
• Page 541
  On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. Caution Shooting is not possible when connected via Wi-Fi to image.canon, even if you press the camera’s shutter button.
• Page 542
  [Reduced] only applies to still photos shot with cameras of the same model as this one. Still photos shot with other models are sent without resizing. A record of sent images can be checked when you access image.canon. When you use a battery to power the camera, make sure it is fully charged.

• Page 543: Streaming Images

  Check the YouTube streaming requirements in advance on the YouTube site. Preparing to Stream Set up [Live streaming] on the camera to enable streaming from the camera. Register the camera for image.canon and complete camera link settings as described in Registering Image.Canon.

• Page 544
  Steps on the camera Select [ A [Live streaming] icon is added.
• Page 545
  YouTube streaming is subject to change, suspension, or termination without prior notice. Canon is in no way responsible for third-party services such as YouTube streaming. No image is recorded to the card during streaming (but a card must be in the camera).
• Page 546
  Live Streaming You can also stream by using the camera to select an event that you have set up in advance on the YouTube site (by entering the streaming time and title). Complete event settings on the YouTube site. For instructions, visit the YouTube site. Set the Mode dial to <…
• Page 547
  Check the terms of service. Read the agreement displayed and choose [I Agree]. Select an event. Select an event that you have added from the YouTube site in advance. Up to 20 events are listed. Note In case of messages indicating that streaming cannot be started, the event has not been registered yet.
• Page 548
  Check the streaming details. Select [OK]. Select [OK]. Select [PRVW] or [LIVE]. Selecting [PRVW] (Preview) enables you to test streaming without releasing images publicly. Useful for checking images before streaming. Selecting [LIVE] (Live) enables you to start streaming immediately.
• Page 549
  Start previewing or streaming. Configure recording features, just as in normal movie recording. When ready, press the movie shooting button. Previewing or streaming starts automatically after [Preparing preview] or [Preparing to stream] is displayed. PRVW] or [ LIVE] is displayed in the upper right during previewing or streaming, respectively.
• Page 550
  Exit streaming mode. Press the < > button, then select [OK]. Caution It will take a moment before streaming begins in step 9. Do not operate the camera while the message is displayed. In case of display problems (character corruption) on the camera for text you entered on the YouTube site, enter the text again from the YouTube site in ASCII format (single-byte letters or numbers).

• Page 551: Wi-Fi Connection Via Access Points

  Wi-Fi Connection via Access Points Camera Access Point Mode Manual IP Address Setup This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. 1 min.

• Page 552
  Select [Add a device to connect to]. The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display]. On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi]. Select [Switch network].
• Page 553
  Select [Connect with WPS]. Note For [Camera access point mode] displayed in step 5, see Camera Access Point Mode. Select [WPS (PBC mode)]. Select [OK].
• Page 554
  Connect to the access point via Wi-Fi. Press the access point’s WPS button. Select [OK]. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see Manual IP Address Setup.
• Page 555
  Remote control (EOS Utility)] Go to step 7 or 8 in Steps on the computer (2). Print from Wi-Fi printer] Go to step 6 in Connecting to a Printer via Wi-Fi. Register image.canon. Go to step 5 in Registering Image.Canon.
• Page 556
  Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ ], [ ], or [ ] is selected after [ : Wi-Fi/Bluetooth connection].
• Page 557
  Manual IP Address Setup The options displayed vary depending on the Wi-Fi function. Select [Manual setting]. Select [OK]. Select an option. Select an option to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
• Page 558
  Enter the desired values. Turn the < > dial to move the input position in the upper area, and use the < >< > keys to select numbers to enter. Press < > to enter the selected number. To delete the number just entered, press the < >…

• Page 559: Connecting To A Wireless Remote Control

  Connecting to a Wireless Remote Control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to Wireless Remote]. Select [Add a device to connect to].

• Page 560
  Pair the devices. When the [Pairing] screen appears, press and hold the <W> and <T> buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press < >. Set up the camera for remote shooting.
• Page 561
  Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [ : Wi-Fi/Bluetooth connection]. Select [ Connect to Wireless Remote]. Select [Delete connection information].
• Page 562
  Select [OK].

• Page 563: Reconnecting Via Wi-Fi

  Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. Select [ : Wi-Fi/Bluetooth connection]. Select an option. Select an option to connect to via Wi-Fi from the displayed history. If the option is not shown, press the < ><…

• Page 564
  Operate the connected device. [ ] Smartphone Start Camera Connect. If the smartphone’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A”…

• Page 565: Registering Multiple Connection Settings

  Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. Select [ : Wi-Fi/Bluetooth connection]. Select an option. If the history ( ) is displayed, switch screens with the < >< > keys. For details on [ Connect to smartphone], see Connecting to a Smartphone.

• Page 566: Airplane Mode

  Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. Select [ : Airplane mode]. Set to [On]. ] is displayed on the screen. Note ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < >…

• Page 567: Wi-Fi Settings

  Wi-Fi Settings Select [ : Wi-Fi settings].

• Page 568
  Select an option. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Password Set to [None] to allow Wi-Fi connections without a password (except when connecting to an access point via Wi-Fi). Connection history You can set the connection history for devices connected via Wi-Fi to [Show] or [Hide].

• Page 569: Bluetooth Settings

  Bluetooth Settings Select [ : Bluetooth settings]. Select an option. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera’s Bluetooth address.

• Page 570: Nickname

  Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. Select [ : Nickname]. Enter text using the Virtual Keyboard Operations. When you finish entering characters, press the < > button.

• Page 571: Gps Settings

  GPS Settings GPS via Mobile GPS Connection Display GPS via Mobile You can geotag images with a Bluetooth enabled smartphone. Complete these settings after installing the dedicated Camera Connect app ( ) on the smartphone. On the smartphone, activate location services. Establish a Bluetooth connection.

• Page 572
  Select [GPS via mobile]. Select [Enable]. Take the picture. Images are geotagged with the information from the smartphone.
• Page 573
  GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo shooting or movie recording ( respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired Geotagging images as you shoot Images you shoot while the GPS icon is on are geotagged.
• Page 574
  Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.

• Page 575: Changing Or Deleting Connection Settings

  Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. Select [ : Wi-Fi/Bluetooth connection]. Select an option. If the history ( ) is displayed, press the < >< > keys to switch the screen.

• Page 576
  Connect to smartphone] is selected. Settings will appear at the bottom of the screen. Delete connection information When deleting connection information for a paired smartphone, also delete the camera information registered on the smartphone ( Note To delete image.canon connection settings, visit the image.canon website.

• Page 577: Resetting Communication Settings

  Resetting Communication Settings All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [ : Reset communication settings]. Select [OK].

• Page 578: View Info Screen

  View Info Screen You can check error details and the camera’s MAC address. Select [ : Wi-Fi/Bluetooth connection]. Press the < > button. The [View info] screen will appear. When an error has occurred, press < > to display the error content.

• Page 579: Virtual Keyboard Operations

  Virtual Keyboard Operations Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard Switch input modes Space Delete a character in the input area Exit input To move the cursor within (1), you can also turn the < >…

• Page 580: Responding To Error Messages

  Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < >.

• Page 581
  11: Connection target not found In the case of [ ], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [ ], is the EOS software running? • Start the EOS software and reestablish the connection ( In the case of [ ], is the power of the printer on? •…
• Page 582
  21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( What to check on the DHCP server Is the power of the DHCP server on?
• Page 583
  22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting match the server’s actual address? • Set the IP address to [Manual setting], and on the camera, specify the same IP address as the DNS server used ( What to check on the DNS server Is the power of the DNS server on?
• Page 584
  23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? • Change the camera’s IP address to avoid using the same address as another device on the network.
• Page 585
  61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera ( What to check on the camera Does the SSID set on the camera match that of the access point?
• Page 586
  64: Cannot connect to wireless LAN terminal Are the camera and the access point set to use the same encryption method? • The camera supports the following encryption methods: WEP, TKIP, and AES. If filtering by MAC address is active, is the MAC address of the camera in use registered at the access point? •…
• Page 587
  68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? • Hold down the WPS button for the period of time specified in the access point’s instruction manual.
• Page 588
  A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 130: The server is currently busy Please wait a moment and try again The image.canon site is busy at the moment.
• Page 589
  141: Printer is busy. Try connecting again. Is the printer performing a printing process? • Try again to establish the Wi-Fi connection to the printer after the printing process is finished. Is another camera connected to the printer via Wi-Fi? •…

• Page 590: Wireless Communication Function Precautions

  Wireless Communication Function Precautions Distance Between the Camera and the Smartphone Installation Location of Access Point Antenna Nearby Electronic Devices Precautions for Using Multiple Cameras If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions.

• Page 591
  Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection. Installation Location of Access Point Antenna When using indoors, install the device in the room where you are using the camera.

• Page 592: Security

  Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.

• Page 593: Checking Network Settings

  Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the <Return> key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.

• Page 594: Wireless Communication Status

  Wireless Communication Status Wireless communication status can be checked on the screen. Shooting functions screen Information display screen during playback (1) Wi-Fi function (2) Wireless signal strength (3) Bluetooth function Screen Communication Status Wi-Fi Function Wireless Signal Strength Wi-Fi: Disable Not connected Wi-Fi: Enable Connecting…

• Page 595
  Bluetooth Function Indicator Bluetooth Function Connection Status Screen Bluetooth connected Other than [Disable] Bluetooth not connected [Disable] Bluetooth not connected Not displayed…

• Page 596: Set-Up

  Set-up This chapter describes menu settings on the set-up ([ ]) tab. to the right of page titles indicates functions only available in Creative Zone modes (< >/< >/< >/< >). • Tab Menus: Set-up • Folder Settings • File Numbering •…

• Page 597: Tab Menus: Set-Up

  Tab Menus: Set-up Set-up 1 Select folder File numbering Format card Auto rotate rotate info Date/Time/Zone Set-up 2 Language Video system Beep Power saving Eco mode…

• Page 598
  Set-up 3 Display settings Screen brightness Viewfinder brightness UI magnification HDMI resolution Set-up 4 Touch control Sensor cleaning…
• Page 599
  Set-up 5 Reset camera Custom Functions(C.Fn) Copyright information Manual/software URL Certification Logo Display Firmware In Basic Zone modes, the following screen is displayed for [ 4]. ([ 5] is not displayed.) Touch control Sensor cleaning Manual/software URL…

• Page 600: Folder Settings

  Folder Settings Creating a Folder Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder Select [ : Select folder]. Select [Create folder].

• Page 601
  Select [OK].
• Page 602
  Selecting a Folder (1) Folder name (2) Number of images in folder (3) Lowest file number (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.

• Page 603: File Numbering

  File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number Select [ : File numbering].

• Page 604
  Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space.
• Page 605
  Continuous For continuous file numbering regardless of switching cards or creating folders Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
• Page 606
  Auto Reset For restarting file numbering from 0001 after switching cards or creating folders When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders. If the replacement card or existing folder already contains images recorded previously, the file numbering of the new images may continue from the file numbering of the existing images on the card or in the folder.
• Page 607
  Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.

• Page 608: Formatting

  Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.

• Page 609
  For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK]. Note The card capacity displayed on the card format screen may be smaller than the capacity indicated on the card. This device incorporates exFAT technology licensed from Microsoft.
• Page 610
  Card file formats SD/SDHC cards will be formatted in FAT32. SDXC cards will be formatted in exFAT. Individual movies recorded to exFAT cards are recorded as a single file (without splitting them into multiple files) even if they exceed 4 GB, so the resulting movie file will exceed 4 GB.

• Page 611: Auto Rotate

  Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [ : Auto rotate]. Select an option. Automatically rotates images for display on both the camera and computers. Automatically rotates images only for display on computers. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].

• Page 612
  Note If a picture is taken while the camera is aimed up or down, automatic rotation to the proper orientation for viewing may not be performed correctly. If images are not rotated automatically on a computer, try using EOS software.

• Page 613: Adding Orientation Information To Movies

  Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. Select [ : Add rotate info].

• Page 614: Date/Time/Zone

  Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.

• Page 615
  Set the time zone. Use the < >< > keys to select [Time zone]. Press < >. Press < >. Use the < >< > keys to select the time zone, then press < >. If your time zone is not listed, press the < >…
• Page 616
  Use the < >< > keys to select a [Time difference] option (+–/ hour/minute), then press < >. Set with the < >< > keys, then press < >. After entering the time zone or time difference, use the < ><…
• Page 617
  Set daylight saving time. Set it as necessary. Use the < >< > keys to select [ ], then press < >. Use the < >< > keys to select [ ], then press < >. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour.
• Page 618
  Note Auto power off time may be extended while the [ : Date/Time/Zone] screen is displayed.

• Page 619: Language

  Language Select [ : Language Set the desired language.

• Page 620: Video System

  Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. Select [ : Video system]. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).

• Page 621: Beeps

  Beeps Select [ : Beep]. Select an option. Enable The camera beeps after focusing and in response to touch operations. Touch Disables beeping for touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations.

• Page 622: Power Saving

  Power Saving You can adjust the timing of when the screen, camera, and viewfinder turn off automatically after the camera is left idle (Display off, Auto power off, and Viewfinder off). Select [ : Power saving]. Select an option. Note Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off].

• Page 623: Eco Mode

  Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. Select [ : Eco mode]. Select [On]. The screen darkens when the camera is not used for approx. two seconds.

• Page 624: Display Settings

  Display Settings You can specify to use the screen or viewfinder for display, to avoid accidentally activating the eye sensor when the screen is open. Select [ : Display settings]. Set [Display control] to [Manual].

• Page 625
  Select [Manual display]. Viewfinder Always use the viewfinder for display. Screen Always use the screen for display when it is open. Note The viewfinder is always used for display when the screen is closed. With [Display control] set to [Auto], the screen is always used for display when it is open, but display switches to the viewfinder when you look through it.

• Page 626: Screen Brightness

  Screen Brightness Select [ : Screen brightness]. Make the adjustment. Referring to the gray image, use the < >< > keys to adjust brightness, then press < >. Note To check the image’s exposure, referring to the histogram is recommended (…

• Page 627: Viewfinder Brightness

  Viewfinder Brightness Select [ : Viewfinder brightness]. Make the adjustment. As you look through the viewfinder, adjust the setting with the < >< > keys, then press < >.

• Page 628: Ui Magnification

  UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. Select [ : UI magnification]. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.

• Page 629: Hdmi Resolution

  HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [ : HDMI resolution]. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television.

• Page 630: Touch Control

  Touch Control Select [ : Touch control]. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions when using the screen (touch-screen panel) Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations.

• Page 631: Sensor Cleaning

  Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Now Select [ : Sensor cleaning]. Select [Clean now Select [OK] on the confirmation screen.

• Page 632
  Cleaning Automatically Select [Auto cleaning Select an option. Use the < >< > keys to select an option, then press < >. Note For best results, clean with the camera in a stable position on a desk or other flat surface.

• Page 633: Resetting The Camera

  Resetting the Camera The camera’s settings for shooting functions and menu functions can be restored to their defaults. Select [ : Reset camera]. Select an option. Basic settings Restores default settings for camera shooting functions and menu settings. Other settings Settings for individual selected items can be reset.

• Page 634: Custom Functions (C.fn)

  Custom Functions (C.Fn) Setting Custom Functions Custom Functions Custom Function Setting Items Setting Custom Functions Select [ : Custom Functions(C.Fn)]. Select a Custom Function number. Use the < >< > keys to select the number of a Custom Function to configure (1), then press < >.

• Page 635
  Change the setting as desired. Select a setting option. To set up another Custom Function, repeat steps 2–3. Note To clear all Custom Function settings you have configured (except [Custom Controls]), access [ : Reset camera] and select [Custom Functions(C.Fn)] in [Other settings].
• Page 636
  Custom Functions Shading indicates that the Custom Function does not apply to this still photo shooting or movie recording. (The settings have no effect.) C.Fn I: Exposure Still Photo Shooting Movie Recording ISO expansion ○ ○ Safety shift ○ C.Fn II: Others Still Photo Shooting Movie Recording Custom Controls…
• Page 637
  Custom Function Setting Items Custom Functions are divided into two groups by function: C.Fn I: Exposure and C.Fn II: Others. C.Fn I: Exposure C.Fn 1: ISO expansion Makes “H” (equivalent to ISO 25600) available as an ISO speed you can set. Note that expanded ISO speeds (H) are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced].
• Page 638
  C.Fn II: Others C.Fn 3: Custom Controls You can assign frequently used functions to camera buttons that are easy for you to use. Select a part of the bar. Select a function to assign. Press < > to set it. Note With the screen in step 1 displayed, you can press the <…
• Page 639
  Functions available for camera controls Function Metering and AF start ○ ○ AF stop ○ Set AF point to center ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ One-Shot AF Servo AF AF method ○ ○ ○…
• Page 640
  Movies Function Movie recording ○ ○ ○ ○ ○ ○ Pause Movie Servo AF ○ ○ ○ ○ ○ ○ Image Function Image quality ○ ○ ○ ○ ○ ○ One-touch image quality setting ○ ○ ○ ○ ○ ○ One-touch image quality (hold) ○…
• Page 641
  Operation Function Depth-of-field preview ○ ○ ○ ○ ○ ○ Magnify ○ ○ ○ ○ ○ ○ Image replay ○ ○ ○ ○ ○ ○ Magnify images during playback ○ ○ ○ ○ ○ ○ Menu display ○ ○ ○ ○…
• Page 642
  C.Fn 4: Release shutter w/o lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera. 0:Disable 1:Enable C.Fn 5: Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera’s power switch is set to <…

• Page 643: Copyright Information

  Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Select [ : Copyright information]. Select an option.

• Page 644
  Enter text. Use the < >< >< >< > keys to select a character, then press < > to enter it. By selecting [ ], you can change the input mode. Select [ ] to delete a character. Exit the setting. Press the <…
• Page 645
  Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.]. Note You can also set or check the copyright information with EOS Utility (EOS software).

• Page 646: Other Information

  Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera’s certifications.

• Page 647: My Menu

  My Menu On the My Menu tab, you can register menu items and Custom Functions you often adjust. Caution The [ ] tab is not displayed when [ : Menu display] is set to [Guided]. Change : Menu display] to [Standard] ( •…

• Page 648: Tab Menus: My Menu

  Tab Menus: My Menu Add My Menu tab Delete all My Menu tabs Delete all items Menu display…

• Page 649: My Menu Registration

  My Menu Registration Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Adding My Menu Tabs Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.

• Page 650
  Registering Menu Items on My Menu Tabs Select [MY MENU*: Configure]. Select [Select items to register]. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the <…
• Page 651
  My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press <…
• Page 652
  Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. To delete any unneeded characters, select [ Use the < >< >< >< > keys to select a character, then press < >. By selecting [ ], you can change the input mode.
• Page 653
  Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default.
• Page 654
  Menu Display You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected.

• Page 655: Reference

  Reference This chapter provides reference information on camera features. • Importing Images to a Computer • Household Power Outlet Accessories • Troubleshooting Guide • Error Codes • System Map • ISO Speed in Movie Recording • Information Display • Specifications…

• Page 656: Importing Images To A Computer

  Importing Images to a Computer Connecting to a Computer via an Interface Cable (Sold Separately) Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. Connecting to a Computer via an Interface Cable (Sold Separately) Install the software (…

• Page 657
  Caution With a Wi-Fi connection established, the camera cannot communicate with the computer even if they are connected with an interface cable. Card Reader You can use a card reader to import images to a computer. Install the software ( Insert the card into the card reader.

• Page 658: Household Power Outlet Accessories

  Household Power Outlet Accessories You can power the camera from a household power outlet with DC Coupler DR-E12 and Compact Power Adapter CA-PS700 (each sold separately). Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. Insert the DC coupler.

• Page 659
  Connect the adapter to the coupler. Open the DC cord hole cover and insert the adapter plug fully into the coupler terminal. Caution Do not connect or disconnect the power cord when the camera’s power switch is set to < >.

• Page 660: Troubleshooting Guide

  Problems with wireless features Operation problems Display problems Playback problems Sensor cleaning problems Computer connection problems Troubleshoot camera issues as described in this section. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center.

• Page 661
  If the battery’s remaining capacity ( ) is 94% or higher, the battery will not be charged. Do not use any battery packs other than a genuine Canon Battery Pack LP-E12. The charger’s lamp blinks at high speed. If (1) the battery charger or battery has a problem or (2) communication with the battery failed (with a non-Canon battery pack), the protection circuit will stop charging, and the charge lamp will blink in orange at a constant high speed.
• Page 662
  The battery becomes exhausted quickly. Use a fully charged battery ( The battery performance may have degraded. If the battery performance is poor, replace the battery with a new one. The number of available shots will decrease with any of the following operations: •…
• Page 663
  Shooting-related problems The lens cannot be attached. To attach EF/EF-S lenses, you will need a mount adapter. The camera cannot be used with RF lenses ( No images can be shot or recorded. Make sure the card is properly inserted ( Slide the card’s write-protect switch to the Write/Erase setting ( If the card is full, replace the card or delete unnecessary images to make space Shooting is not possible if the AF point turns orange when you attempt to shoot still…
• Page 664
  Still photo file size / Number of possible shots / Maximum burst for continuous shooting is based on the standard Canon test card, and the actual maximum burst is higher for cards with faster writing speeds. For this reason, estimated maximum burst may differ from actual maximum burst.
• Page 665
  The external Speedlite does not fire. Make sure the external Speedlite is securely attached to the camera. The Speedlite always fires at full output. If you use a flash unit other than an EL/EX series Speedlite, the flash will always fire at full output ( The flash always fires at full output when [Flash metering mode] in external flash Custom Function settings is set to [TTL flash metering] (autoflash) (…
• Page 666
  A white [ ] or red [ ] icon is displayed in still photo shooting. It indicates that the camera’s internal temperature is high. Image quality of still photos may be worse when a white [ ] icon is displayed. Display of a red [ ] icon indicates that shooting will soon stop automatically ( ISO 100 cannot be set or ISO speed expansion cannot be selected in…
• Page 667
  The manually set ISO speed changes when switching to movie recording. For still photo shooting, ISO speed is set according to [ISO speed] in [ speed settings] ( ), and for movie recording, according to [ISO speed] in [ speed settings] ( ISO 100 cannot be set or ISO speed expansion cannot be selected during movie recording.
• Page 668
  Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
• Page 669
  Operation problems Touch operation is not possible. Make sure [ : Touch control] is set to [Standard] or [Sensitive] ( A camera button or dial does not work as expected. Check the [Custom Controls] setting in [ : Custom Functions(C.Fn)] ( In movie recording, check the [ : Shutter btn function for movies] setting (…
• Page 670
  Display problems The menu screen shows fewer tabs and items. Certain tabs and items are not shown in Basic Zone modes or movie recording. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab].
• Page 671
  The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
• Page 672
  Playback problems A red box is displayed on the image. : AF point disp.] is set to [Enable] ( During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: •…
• Page 673
  No picture appears on the television. Make sure [ : Video system] is set to [For NTSC] or [For PAL] correctly for the video system of your television. Make sure the HDMI cable’s plug is inserted all the way in ( There are multiple movie files for a single movie recording.
• Page 674
  Sensor cleaning problems The shutter makes a sound during sensor cleaning. Although there is a mechanical sound from the shutter during cleaning after [Clean now ] in [ : Sensor cleaning] is selected, no image is recorded to the card ( Automatic sensor cleaning does not work.

• Page 675: Error Codes

  Error Codes If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and contact a Canon Service Center. (1) Error number (2) Cause and countermeasures…

• Page 676: System Map

  System Map ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) ( 8 ) ( 9 ) ( 10 ) ( 11 ) ( 12 ) ( 13 ) ( 14 ) ( 30 ) ( 24 )

• Page 677
  * 2: Also available for purchase separately. * 3: Camera end: USB Micro-B. A genuine Canon accessory is also available (Interface Cable IFC-600PCU). * 4: Use a commercially available cable no longer than 2.5 m (8.2 ft.). The camera end is Type D.

• Page 678: Iso Speed In Movie Recording

  ISO Speed in Movie Recording In [ ] mode, when set to ISO Auto ISO speed is automatically set in a range of ISO 100–12800 for Full HD/HD movies and ISO 100–6400 for 4K movies. The maximum value in the automatic setting range is expanded to H (equivalent to ISO 25600) in Full HD/HD movie recording when [ISO expansion] in [ : Custom Functions(C.Fn)] is set to [1:Enable] ( ) and then [Max for Auto] in […

• Page 679: Information Display

  Information Display Quick Control Screen Still Photo Shooting Screen Movie Recording Screen Scene Icons Playback Screen…

• Page 680
  Quick Control Screen In Creative Zone modes (other than the shooting functions screen) AF method AF operation Drive mode Metering mode Image quality Movie recording size Return White balance Picture Style (10) Auto Lighting Optimizer (11) Creative filters (12) Still image aspect ratio…
• Page 681
  Shooting functions screen in Creative Zone modes Shutter speed Shooting mode* Exposure compensation/AEB setting White balance Picture Style White balance correction AF method AF operation Drive mode (10) Aperture value (11) ISO speed (12) Flash exposure compensation (13) Auto Lighting Optimizer (14) Metering mode (15)
• Page 682
  During movie recording Shooting mode AF method Movie self-timer Movie recording size Digital zoom Movie digital IS Return White balance Picture Style (10) Auto Lighting Optimizer (11) Miniature effect movie…
• Page 683
  Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
• Page 684
  Battery level Movie recording time available Maximum burst Number of available shots/Sec. until self-timer shoots Shooting mode/Scene icon Grid AF method AF operation Drive mode (10) Metering mode (11) Image quality (12) Movie recording size (13) Wi-Fi function (14) Warning to use flash (blinking)/Flash ready (on)/FE lock/High-speed sync (15) AE lock (16)
• Page 685
  Note You can specify the information displayed in response to pressing the < > button ( The electronic level is not displayed when the camera is connected via HDMI to a television. Other icons may be displayed temporarily after setting adjustments.
• Page 686
  Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
• Page 687
  Sound recording off indicator Movie orientation information Battery level Movie recording time available/Elapsed recording time Movie recording mode Grid AF method Movie self-timer Movie recording size (10) Digital zoom (11) Movie digital IS (12) Movie Servo AF (13) AE lock (14) Shutter speed (15)
• Page 688
  Caution You can specify the information displayed in response to pressing the < > button ( The electronic level is not displayed when the camera is connected via HDMI to a television. The electronic level, grid lines, and histogram cannot be displayed during movie recording (and if they are currently displayed, recording a movie will clear the display).
• Page 689
  Scene Icons In < > shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen. People Subjects Other Than People Subject Background Nature/ At Close Color In Motion…
• Page 690
  Playback Screen Basic information display for still photos Wi-Fi function Wi-Fi signal strength Battery level Current image no./Total images/No. of images found Airplane mode Shutter speed Aperture value Exposure compensation amount Bluetooth function (10) Rating (11) Image protection (12) Folder no.-File no. (13) Image quality/Edited image/Cropping (14)
• Page 691
  Caution You can specify the information displayed in response to pressing the < > button ( If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
• Page 692
  Detailed information display for still photos Shutter speed Shooting mode Aperture value White balance White balance correction amount Exposure compensation amount Shooting date and time Histogram (Brightness/RGB) ISO speed (10) Highlight tone priority (11) Metering mode (12) Flash photography/Flash exposure compensation amount (13) Auto Lighting Optimizer (14)
• Page 693
  Detailed information display for movies Movie playback Movie recording mode/Time-lapse movie/Video snapshot Movie orientation information Image size Frame rate Movie digital IS Recording time Movie recording format Movie compression method * For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.

• Page 694: Specifications

  Lens mount: Canon EF-M mount Compatible lenses: Canon EF-M lens group * Using mount adapter EF-EOS M: Canon EF or EF-S lenses * RF mount lenses cannot be used Lens focal length: Approx. 1.6 times the focal length indicated on the lens…

• Page 695
  Still photo recording Image type in still photo recording Image quality Resolution (pixels) 24.0 megapixels (6000 × 4000) Approx. 10.6 megapixels (3984 × 2656) JPEG Approx. 5.9 megapixels (2976 × 1984) Approx. 3.8 megapixels (2400 × 1600) RAW/C-RAW 24.0 megapixels (6000 × 4000) Still photo pixel count Recorded pixels Image quality…
• Page 696
  1250 * The number of possible shots and maximum burst apply to a UHS-I compliant 32 GB card based on Canon testing standards. * File size, number of possible shots, and maximum burst vary depending on shooting conditions (including subject, ISO speed, Picture Style, and Custom Function).
• Page 697
  Movie recording Movie recording format: MP4 Estimated recording time, movie bit rate, and file size Total recording time on each card (approx.) Movie bit rate (approx.) Movie recording size / File size (approx.) 32 GB 128 GB 4K (UHD) 23.98 fps 120 Mbps IPB (Standard) 35 min.
• Page 698
  Recording microphone Built-in microphone: Stereo microphones External microphone terminal: 3.5 mm diameter stereo mini jack Recording media Recording media: SD, SDHC, and SDXC memory cards SD speed class Supported UHS speed class Supported UHS-I Supported Viewfinder (electronic viewfinder) Type: OLED color electronic viewfinder Screen size: 0.39 inch Dot count: Approx.
• Page 699
  HDMI output HDMI video / audio output: HDMI micro OUT terminal (Type D) / CEC not supported HDMI resolution: Auto / 1080p Autofocus Item Still photo shooting Movie recording Focusing Dual Pixel CMOS AF Dual Pixel CMOS AF method (Contrast detection method at 4K* (1) Autofocus (1) Autofocus •…
• Page 700
  Exposure control Metering functions under various shooting conditions Item Still photo shooting Movie recording Metering mode 384-zone (24 × 16) metering using the image sensor Evaluative When faces are detected with [ +Tracking] Supported metering automatically set Partial metering Supported: approx. 5.8% of the screen –…
• Page 701
  ISO Auto details (Still photo shooting) ISO Auto range Shooting mode No flash Flash on ISO 100 to Creative Zone ISO Auto maximum setting ISO 100–1600 value Using built-in flash Scene Intelligent Auto ISO 100–3200 ISO 100–6400 Using external flash <…
• Page 702
  Shutter Still photo shooting Electronically controlled focal-plane shutter * Electronic 1st / mechanical 2nd curtain * Except when Silent Mode is set Type Rolling shutter, using the image sensor * Electronic shutter * When Silent Mode is set Creative Zone: 1/4000–30 sec., Bulb* Shutter speed Basic Zone: 1/4000–1 sec.* Maximum flash sync speed: 1/200 sec.
• Page 703
  Drive Drive mode and continuous shooting speed Single shooting ○ One-Shot AF Max. approx. 10 shots/sec.* High-speed continuous shooting* Servo AF Max. approx. 7.4 shots/sec.* One-Shot AF Max. approx. 4.0 shots/sec.* Low-speed continuous shooting* Servo AF Max. approx. 4.0 shots/sec.* ○…
• Page 704
  Print order (DPOF) System: Compliant with DPOF Version 1.1 External interface Digital terminal Terminal type USB Micro-B Transmission Hi-Speed USB (USB 2.0) equivalent For PC communication Applications For printer connection HDMI output terminal: Type D (Resolution switches automatically) * CEC not supported * [For NTSC] / [For PAL] settings are required to match the video format of the TV you are connecting External microphone input terminal: Compatible with the 3.5 mm diameter stereo mini plug…
• Page 705
  Available operating time Available operating Shooting method Temperature time Time available for bulb exposure 23°C / 73°F Approx. 3 hr. 15 min. 4K 23.98 fps On-screen shooting 23°C / 73°F Approx. 1 hr. 35 min. Time available for movie recording 23°C / 73°F Approx.
• Page 706
  Dimensions and weight listed above are based on CIPA Guidelines (except weight for camera body only). Product specifications and the exterior are subject to change without notice. If a problem occurs with a non-Canon lens attached to the camera, consult the respective lens manufacturer.

• Page 707: Trademarks And Licensing

  The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. All other trademarks are the property of their respective owners.

• Page 708
  About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
• Page 709
  This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).