Эллиптический тренажер kettler 7853 600 astro инструкция

Quick Links

For Your Safety:

■Only use the Cross-Trainer for its intended purpose, i.e. for the physical training of adult persons.

■Any other use is inadmissible and may be dangerous. The manufacturer cannot be made liable for damage caused by a use that does not correspond with the intended purpose.

■You train with an equipment that has been designed in accordance with the latest state of the art regarding safety. Possible danger spots that may cause injuries have been avoided and safeguarded as well as possible.

■Improper repairs and design changes (disassembly of original parts, installation of inadmissible parts, etc.) may cause hazards for the user.

■Defective parts may impair your safety and the service life of your equipment. Therefore, please exchange defective or worn parts immediately.

■If you have any doubt or any queries, please contact your specialised dealer.

■If you train regularly and intensively, please check all equipment parts – in particular bolts and nuts – every 1 to 2 months. This is particularly true for the attachment of grip strap and running plate.

■Inform present persons (especially children) about possible hazards during your exercises.

■Prior to taking up training, have your family doctor check whether your state of health is sufficient to train with this equipment. The medical findings should be the basis for the build-up or your training program. Wrong or excessive training may lead to damage to your health.

■By all means observe the information about the organisation of training in the training instructions.

■Our products are subject to a constant innovative quality assurance. We reserve the right to perform technical changes resulting therefrom.

Handling the equipment

■Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled.

■It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.

■The Cross-Trainer is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.

■The Cross-Trainer complies with the DIN EN 957 — 1/5, class B. It is therefore unsuitable for therapeutic use.

■On principle, the equipment does not require any special mainte-

nance. All bearings are pre-lubricated (further lubrication is not required) and require little maintenance.

■Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment.

■The exercise cycle has a brake system, which require little maintenance and does not require any adjusting work.

■To operate correctly, the pulse function requires a minimum voltage of 2,7 volts.

■The Cross-Trainer is dependent of revolutions per minute.

■Please ensure that liquids or perspiration never enter the machine or the electronics.

■Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.

■Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

Instructions for Assembly

■Ensure that you have received all the parts required ( see check list ) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.

■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.

■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented.

■Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.

■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger.

List of spare parts

When ordering spare parts, always state the full article number, sparepart number, the quantity required and the inspection number stamped on the back.

Example order: Art. no. 7853-090 / spare-part no. 94313288/ 2 pieces / inspection no. ………

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be

There is always a risk of suffocation if children play with plastic bags!

■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.

■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.

■For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).

clearly stated on the order by adding the words „with fastening material“.