Hikvision ds 7608ni k2 8p инструкция

1. Manuals
2. Brands
3. HIKVISION Manuals
4. Network Hardware
5. DS-7608NI-K2/8P

Manuals and User Guides for HIKVISION DS-7608NI-K2/8P. We have 4 HIKVISION DS-7608NI-K2/8P manuals available for free PDF download: User Manual, Quick Start Manual

1. Manuals
2. Brands
3. HIKVISION Manuals
4. Network Hardware
5. DS-7608NI-K2/8P/4G
6. User manual

• Page 1
  Network Video Recorder User Manual UD04699B…
• Page 2
  INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
• Page 3
  Network Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
• Page 4
  Network Video Recorder User Manual Applicable Models This manual is applicable to the models listed in the following table. Series Model DS-9608NI-I8 DS-9616NI-I8 DS-9600NI-I8 DS-9632NI-I8 DS-9664NI-I8 DS-9616NI-I16 DS-9600NI-I16 DS-9632NI-I16 DS-9664NI-I16 DS-8608NI-I8 DS-8616NI-I8 DS-8600NI-I8 DS-8632NI-I8 DS-8664NI-I8 DS-7608NI-I2 DS-7600NI-I2 DS-7616NI-I2 DS-7632NI-I2 DS-7608NI-I2/8P DS-7600NI-I2/P DS-7616NI-I2/16P DS-7632NI-I2/16P…
• Page 5
  Network Video Recorder User Manual DS-7732NI-K4/16P DS-7608NI-K2 DS-7600NI-K2 DS-7616NI-K2 DS-7632NI-K2 DS-7608NI-K2/8P DS-7600NI-K2/P DS-7616NI-K2/16P DS-7632NI-K2/16P DS-7604NI-K1 DS-7600NI-K1 DS-7608NI-K1 DS-7616NI-K1 DS-7600NI-K1/4P DS-7604NI-K1/4P Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
• Page 6
  Network Video Recorder User Manual Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
• Page 7
  Network Video Recorder User Manual Product Key Features General  Connectable to network cameras, network dome and encoders.  Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or PSIA protocol.
• Page 8
  Network Video Recorder User Manual  Up to 6TB storage capacity for each disk supported.  Supports 8 network disks (NAS/IP SAN disk).  Supports S.M.A.R.T. and bad sector detection.  HDD group management.  Supports HDD standby function.  HDD property: redundancy, read-only, read/write (R/W). …
• Page 9
  Network Video Recorder User Manual  Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when playback, and locating by dragging the mouse.  Supports thumbnails view and fast view during playback.  Up to 16-ch synchronous playback at 1080p real time. …
• Page 10
  Network Video Recorder User Manual Network Functions  Two self-adaptive 10M/100M/1000Mbps network interfaces for DS-9600NI, DS-8600NI, DS-7700NI-I4 and DS-7700NI-K4, and the multi-address and network fault tolerance working modes are configurable.  One self-adaptive 10M/100M/1000Mbps network interface for DS-7600NI-K2/I2 (/P), DS-7700NI-I4/P and DS-7700NI-K4/P. …
• Page 11
  Network Video Recorder User Manual  Embedded WEB server. Development Scalability:  SDK for Windows system.  Source code of application software for demo.  Development support and training for application system.
• Page 12
  Network Video Recorder User Manual TABLE OF CONTENTS Chapter 1 Introduction ……………………18 1.1 Front Panel ……………………18 1.1.1 DS-9600NI Series ………………… 18 1.1.2 DS-8600NI-I8 Series ………………..22 1.1.3 DS-8600NI-K8 and DS-7700NI Series …………..26 1.1.4 DS-7600NI Series ………………… 28 1.2 IR Remote Control Operations ………………
• Page 13
  Network Video Recorder User Manual 3.2.3 Using an Auxiliary Monitor ………………73 3.2.4 Quick Setting Toolbar in Live View Mode …………… 74 3.2.5 Fisheye Expansion View ………………76 3.3 Adjusting Live View Settings ……………….. 78 3.4 Channel-zero Encoding………………… 80 Chapter 4 PTZ Controls ……………………. 81 4.1 Configuring PTZ Settings ………………..
• Page 14
  Network Video Recorder User Manual 6.1.3 Playing back by Smart Search…………….122 6.1.4 Playing Back by Event Search …………….125 6.1.5 Playing Back by Tag ………………..127 6.1.6 Playing Back by Sub-periods …………….. 129 6.1.7 Playing Back by System Logs …………….. 130 6.1.8 Playing Back External File ………………
• Page 15
  Network Video Recorder User Manual 9.3 Configuring POS Privacy Information Filtering…………… 170 9.4 Configuring POS Alarm ………………..170 Chapter 10 VCA Alarm …………………… 173 10.1 Face Detection………………….173 10.2 Vehicle Detection ………………….175 10.3 Line Crossing Detection ………………..176 10.4 Intrusion Detection …………………. 179 10.5 Region Entrance Detection ………………
• Page 16
  Network Video Recorder User Manual 12.4 Configuring Network Detection ………………. 212 12.4.1 Testing Network Delay and Packet Loss ………….. 212 12.4.2 Exporting Network Packet ………………. 212 12.4.3 Checking the Network Status …………….213 12.4.4 Checking Network Statistics …………….214 Chapter 13 RAID ……………………… 216 13.1 Configuring Array ………………….
• Page 17
  Network Video Recorder User Manual 16.4 Importing/Exporting Configuration Files …………..252 16.5 Upgrading System ………………….253 16.5.1 Upgrading by Local Backup Device …………..253 16.5.2 Upgrading by FTP ………………..253 16.6 Restoring Default Settings ……………….. 255 Chapter 17 Others ……………………. 256 17.1 Configuring RS-232 Serial Port ………………
• Page 18
  Version 3.3.4 ……………………307 18.5 List of Compatible IP Cameras………………308 18.5.1 List of Hikvision IP Cameras …………….308 18.5.2 List of Third-party IP Cameras …………….318 18.5.3 List of IP Cameras Connected to PoE by Long Network Cable (100 — 300 m) ..322…
• Page 19
  Network Video Recorder User Manual Chapter 1 Introduction 1.1 Front Panel 1.1.1 DS-9600NI Series Figure 1-1 DS-9600NI-I8 Series Figure 1-2 DS-9600NI-I16 Series…
• Page 20
  Network Video Recorder User Manual Table 1-1 Panel Description No. Name Function Description ALARM Turns red when a sensor alarm is detected. Turns blue when the device is functioning READY properly. Turns blue when device is controlled by an IR remote.
• Page 21
  Network Video Recorder User Manual No. Name Function Description Universal Serial Bus (USB) ports for additional USB Interfaces devices such as USB mouse and USB Hard Disk Drive (HDD). Returns to the previous menu. Presses for arming/disarming the device in live view mode.
• Page 22
  Network Video Recorder User Manual No. Name Function Description Turns on/off PTZ light (if applicable) in PTZ control mode. Switches between play and reverse play in playback mode. Cycles through tab pages. F2/ AUX Switches between channels in synchronous playback mode. Returns to the Main menu (after successful login).
• Page 23
  Network Video Recorder User Manual No. Name Function Description mode. Advances the video by a single frame in single-frame playback mode. Stops/starts auto switch in auto-switch mode. Moves the active selection up and down in a menu. Cycles through different channels in live view mode.
• Page 24
  Network Video Recorder User Manual Table 1-2 Description of Control Panel Buttons No. Name Function Description ALARM Turns red when a sensor alarm is detected. Turs blue when the device is functioning READY properly. Turns blue when device is controlled by an IR remote.
• Page 25
  Network Video Recorder User Manual No. Name Function Description Drive (HDD). Returns to the previous menu. Presses for arming/disarming the device in live view mode. Enters the Manual Record settings menu. Presses this button followed by a numeric button REC/SHOT to call a PTZ preset in PTZ control settings.
• Page 26
  Network Video Recorder User Manual No. Name Function Description playback mode. Cycles through tab pages. F2/ AUX Switches between channels in synchronous playback mode. Returns to the Main menu (after successful login). Presses and holds the button for five seconds to turn off audible key beep.
• Page 27
  Network Video Recorder User Manual No. Name Function Description Stops/starts auto switch in auto-switch mode. Moves the active selection up and down in a menu. Cycles through different channels in live view mode. JOG SHUTTLE Control Jumps 30s forward/backward in video files in the playback mode.
• Page 28
  Network Video Recorder User Manual Table 1-3 Panel Description No. Name Function Description POWER Turns green when NVR is powered up. Status Blinks red when HDD is reading/writing. Indicators Blinks green when network connection is functioning Tx/Rx normally. The Enter button is used to confirm selection in menu mode;…
• Page 29
  NVRs. You may also pair an IR Remote to a specific NVR by changing the Device ID#, as follows: Pairing (Enabling) the IR Remote to a Specific NVR (optional) You can pair an IR Remote to a specific Hikvision NVR by creating a user-defined Device ID#. This feature is useful when using multiple IR Remotes and NVRs.
• Page 30
  Network Video Recorder User Manual Step 4 Press the DEV button. Step 5 Use the Number buttons to enter the Device ID# that was entered into the NVR. Step 6 Press Enter button to accept the new Device ID#. Figure 1-7 Remote Control Unpairing (Disabling) an IR Remote from a NVR To unpair an IR Remote from a NVR so that the unit cannot control any NVR functions, proceed as follows:…
• Page 31
  Network Video Recorder User Manual Table 1-5 IR Remote Functions No. Name Function Description • To Turn Power On: If User Has Not Changed the Default NVR Device ID# (255): 1. Press Power On/Off button (1). If User Has Changed the NVR Device ID#: 1.
• Page 32
  Network Video Recorder User Manual User name/password prompt depends on NVR is configuration. See “System Configuration” section. Enable IR Remote: Press DEV button, enter NVR Device ID# with number keys, press Enter to pair unit with the NVR Disable IR Remote: Press DEV button to clear Device ID#; unit will no longer be paired with the NVR Switch to the corresponding channel in Live View or PTZ Control mode…
• Page 33
  Network Video Recorder User Manual Control PTZ camera movement in PTZ control mode Confirm selection in any menu mode Checks checkbox ENTER Play or pause video in Playback mode Advance video a single frame in single-frame Playback mode Stop/start auto switch in auto-switch mode Enter PTZ Control mode Go back to previous screen RESERVED…
• Page 34
  Network Video Recorder User Manual If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status indicator does not turn blue and there is still no response from the remote, please check the following: …
• Page 35
  Network Video Recorder User Manual 1.3 USB Mouse Operation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse: Step 1 Plug USB mouse into one of the USB interfaces on the front panel of the NVR. Step 2 The mouse should automatically be detected.
• Page 36
  Network Video Recorder User Manual 1.4 Input Method Description Figure 1-8 Soft Keyboard (1) Figure 1-9 Soft Keyboard (2) Description of the buttons on the soft keyboard: Table 1-7 Description of the Soft Keyboard Icons Icon Description Icon Description Number English letter ……
• Page 37
  Network Video Recorder User Manual 1.5 Rear Panel 1.5.1 DS-9600NI and DS-8600NI Series Figure 1-10 DS-9600NI-I8 and DS-8600NI Series Figure 1-11 DS-9600NI-I16 Series…
• Page 38
  Network Video Recorder User Manual Table 1-8 Panel Description No. Name Description LAN1/LAN2 2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet Interface interfaces provided. LINE IN RCA connector for audio input. AUDIO OUT 2 RCA connectors for audio output. HDMI1/HDMI2 HDMI video output connector. VGA1/VGA2 DB9 connector for VGA output.
• Page 39
  Network Video Recorder User Manual Figure 1-13 DS-7600NI-I2/8P and DS-7600NI-K2/8P Series The DS-7616NI-I2/16P and DS-7632NI-I2/16P provide 16 network Interfaces with PoE function. Table 1-9 Panel Description No. Name Description Audio In RCA connector for audio input. Audio Out RCA connector for audio output. VGA Interface DB9 connector for VGA output.
• Page 40
  Network Video Recorder User Manual (supported DS-7600NI-I2/P) DS-7600NI-K1 and DS-7600NI-K1/4P Figure 1-14 DS-7600NI-K1 Series Figure 1-15 DS-7604NI-K1/4P Series Table 1-10 Panel Description No. Name Description Network Interfaces Network interfaces for the cameras and to provide with PoE function power over Ethernet. Audio In RCA connector for audio input.
• Page 41
  Network Video Recorder User Manual Ground Ground (needs to be connected when NVR starts up). 1.5.3 DS-7700NI Series Figure 1-16 DS-7700NI-I4 and DS-7700NI-K4 Series Figure 1-17 DS-7700NI-I4/16P and DS-7700NI-K4/16P Series The DS-7708NI-I4/8P and DS-7708NI-K4/8P provides 8 network Interfaces with PoE function. Table 1-11 Panel Description No.
• Page 42
  Network Video Recorder User Manual DB9 connector for VGA output. Display local video output and menu. RS-485 Interface Half-duplex connector for RS-485 devices. ALARM IN Connector for alarm input. ALARM OUT Connector for alarm output. GROUND Ground (needs to be connected when NVR starts up).
• Page 43
  Network Video Recorder User Manual Chapter 2 Getting Started 2.1 Device Startup and Activation 2.1.1 Starting Up and Shutting Down the NVR Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the NVR. Before you start: Check that the voltage of the extra power supply is the same with the NVR’s requirement, and the ground connection is working properly.
• Page 44
  Network Video Recorder User Manual Step 3 Click the Yes button.  OPTION 2: By operating the front panel Step 1 Press and hold the POWER button on the front panel for 3 seconds. Step 2 Enter the administrator’s username and password in the dialog box for authentication. Step 3 Click the Yes button.
• Page 45
  Network Video Recorder User Manual We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
• Page 46
  Network Video Recorder User Manual If Admin’s password is modified, the following menu pops up. Optionally, click the Yes button to duplicate the password to IP cameras that are connected with default protocol. Figure 2-5 Attention Interface 2.1.3 Using the Unlock Pattern for Login For the Admin user, you can configure the unlock pattern for device login.
• Page 47
  Network Video Recorder User Manual Figure 2-7 Draw the Pattern Connect at least 4 dots to draw the pattern. Each dot can be connected for once only. Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully.
• Page 48
  Network Video Recorder User Manual Figure 2-9 Re-set the Pattern Logging in via Unlock Pattern  Only the admin user has the permission to unlock the device.  Please configure the pattern first before unlocking. Please refer to Configuring the Unlock Pattern Step 1 Right click the mouse on the screen and select the menu to enter the interface as shown in Figure 2.8.
• Page 49
  Network Video Recorder User Manual  If you have forgotten your pattern, you can select the Forget My Pattern or Switch User option to enter the normal login dialog box.  When the pattern you draw is different from the pattern you have configured, you should try again.
• Page 50
  Network Video Recorder User Manual In the Login dialog box, if you enter the wrong password 7 times, the current user account will be locked for 60 seconds. User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to perform any operations, you need to enter user name and password log in again.
• Page 51
  Network Video Recorder User Manual Figure 2-14 Reset Password Step 2 Select the GUID file from the U flash disk and click Import to import the file to the device. If you have imported the wrong GUIE file for 7 times, you will be not allowed to reset the password for 30 minutes.
• Page 52
  Network Video Recorder User Manual Figure 2-15 Start Wizard Interface Operating the Setup Wizard: Step 1 The Setup Wizard can walk you through some important settings of the NVR. If you don’t want to use the Setup Wizard at that moment, click the Cancel button. You can also choose to use the Setup Wizard next time by leaving the “Start wizard when the device starts?”…
• Page 53
  Network Video Recorder User Manual Figure 2-17 Network Settings Two self-adaptive 10M/100M/1000M network interfaces provided for DS-9600NI, DS-8600NI, DS-7700NI-I4 and DS-7700NI-K4, and two working modes are configurable: multi-address and network fault tolerance. And one self-adaptive 10M/100M/1000M network interface for DS-7600NI, DS-7700NI-I4/P and DS-7700NI-K4/P.
• Page 54
  Network Video Recorder User Manual Figure 2-19 Advanced Network Parameters Step 6 Click Next button after you configured the network parameters, which takes you to the RAID configuration window. The RAID is supported by DS-9600NI-I8 and DS-9600NI-I16 series NVR only. Figure 2-20 Array Management Step 7 Click Next button to enter the Array Management window.
• Page 55
  Network Video Recorder User Manual Figure 2-21 Array Management Step 8 Click Next button after you configured the network parameters, which takes you to the HDD Management window, shown in Figure 2-22. Figure 2-22 HDD Management Step 9 To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
• Page 56
  Network Video Recorder User Manual Figure 2-23 Search for IP Cameras When you check the checkbox of Enable H.265, the NVR can automatically switch to the H.265 stream of IP camera (which supports H.265 video format) for the initial access. Step 12 Click Next button.
• Page 57
  Network Video Recorder User Manual 2.3 Adding and Connecting the IP Cameras 2.3.1 Activating the IP Camera Purpose: Before adding the camera, make sure the IP camera to be added is in active status. Step 1 Select the Add IP Camera option from the right-click menu in live view mode or click Menu> Camera>…
• Page 58
  Network Video Recorder User Manual Step 3 Set the password of the camera to activate it. Use Admin Password: when you check the checkbox, the camera (s) will be configured with the same admin password of the operating NVR. Figure 2-27 Set New Password Create New Password: If the admin password is not used, you must create the new password for the camera and confirm it.
• Page 59
  Network Video Recorder User Manual Step 2 Click the icon in the center of the windw to pop up the adding IP camera interface. Figure 2-28 Icon of Adding IP Camera Step 3 Select the detected IP camera and click the Add button to add it directly, and you can click the Search button to refresh the online IP camera manually.
• Page 60
  Network Video Recorder User Manual Figure 2-30 Adding IP Camera Interface Step 2 The online cameras with same network segment will be detected and displayed in the camera list. Step 3 Select the IP camera from the list and click the button to add the camera.
• Page 61
  Network Video Recorder User Manual  OPTION 3: Step 1 On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera (Custom) interface. Figure 2-32 Custom Adding IP Camera Interface Step 2 You can edit the IP address, protocol, management port, and other information of the IP camera to be added.
• Page 62
  Network Video Recorder User Manual Table 2-1 Description of Icons Icon Explanation Icon Explanation Edit basic parameters of the Add the detected IP camera. camera The camera is disconnected; you can click the icon to get Delete the IP camera the exception information of camera.
• Page 63
  Network Video Recorder User Manual Figure 2-34 List of Added IP Cameras Enabling the H.265 Stream Access You can check the checkbox of Enable H.265, the NVR can automatically switch to the H.265 stream of IP camera (which supports H.265 video format) for the initial access. 2.3.3 Editing the Connected IP Cameras and Configuring Customized Protocols After the adding of the IP cameras, the basic information of the camera lists in the page, you can…
• Page 64
  Network Video Recorder User Manual Figure 2-35 Edit the Parameters Channel Port: If the connected device is an encoding device with multiple channels, you can choose the channel to connect by selecting the channel port No. in the dropdown list. Step 2 Click OK to save the settings and exit the editing interface.
• Page 65
  Network Video Recorder User Manual Figure 2-37 Password Configuration of the Camera Step 3 Click OK to save the settings and exit the interface.  Configuring the customized protocols Purpose: To connect the network cameras which are not configured with the standard protocols, you can configure the customized protocols for them.
• Page 66
  Network Video Recorder User Manual Before customizing the protocol for the network camera, you have to contact the manufacturer of the network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream. The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. Example: rtsp://192.168.1.55:554/ch1/main/av_stream.
• Page 67
  Network Video Recorder User Manual 2.3.4 Editing IP Cameras Connected to the PoE Interfaces This chapter is only applicable for the following models: DS-7600NI-I2/P, DS-7700NI-I4/P, DS-7600NI-K2/P, DS-7700NI-K4/P and DS-7600NI-K1/4P series NVR. The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet cabling to the connected network cameras.
• Page 68
  Network Video Recorder User Manual edited in the Network Configuration interface, see Chapter 11.1 Configuring General Settings for detailed information. Figure 2-41 Edit IP Camera Interface — Plug-and-Play • Manual: You can disable the PoE interface by selecting the manual while the current channel can be used as a normal channel and the parameters can also be edited.
• Page 69
  Network Video Recorder User Manual 2.3.5 Configuring PoE Interface When it requires long-distance PoE transmission (100 to 300 m), you can configure the PoE channel to the long network cable mode. Step 1 Enter the PoE Configuration interface. Menu> Camera> Camera>PoE Configuration Step 2 Click the radio button of each POE channel to switch .
• Page 70
  Network Video Recorder User Manual  The PoE is enabled with the short network cable mode (OFF) by default.  The bandwidth of IP camera connected to the PoE via long network cable (100 — 300 meters) cannot exceed 6 MP. …
• Page 71
  Network Video Recorder User Manual Chapter 3 Live View 3.1 Introduction of Live View Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many times (depending on which menu you’re on) brings you to the Live View mode.
• Page 72
  Network Video Recorder User Manual 3.2 Operations in Live View Mode In live view mode, there are many functions provided. The functions are listed below. • Single Screen: showing only one screen on the monitor. • Multi-screen: showing multiple screens on the monitor simultaneously. •…
• Page 73
  Network Video Recorder User Manual 3.2.1 Front Panel Operation on Live View Table 3-2 Front Panel Operation in Live View Functions Front Panel Operation Show single screen Press the corresponding Alphanumeric button. E.g. Press 2 to display only the screen for channel 2. Show multi-screen Press the PREV/FOCUS- button.
• Page 74
  Network Video Recorder User Manual Enter the PTZ control interface. Four modes of output supported, including Standard, Bright, Output Mode Gentle and Vivid. Switch to the auxiliary output mode and the operation for Aux Monitor the main output is disabled. …
• Page 75
  Network Video Recorder User Manual  Main Monitor: Enter Main operation mode. In the live view mode of the main output monitor, the menu operation is not available while Aux output mode is enabled. 3.2.4 Quick Setting Toolbar in Live View Mode On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse in the corresponding screen.
• Page 76
  Network Video Recorder User Manual Digital Zoom is for zooming in the live image. You can zoom in the image to different proportions (1 to16X) by moving the sliding bar from . You can also scroll the mouse wheel to control the zoom in/out. Figure 3-3 Digital Zoom Image Settings icon can be selected to enter the Image Settings menu.
• Page 77
  Network Video Recorder User Manual Figure 3-5 Live View Strategy Face detection function can be used to detect the human faces in live view mode and save in HDD. When there are human faces with the specified size detected in the front of the camera, the device will capture the human face and save in HDD.
• Page 78
  Network Video Recorder User Manual Table 3-5 Fisheye Display Mode Button Operation 180° panorama Fisheye 360° panorama expansion PTZ expansion Fisheye Four different display modes are available. You can select a display mode as demand.  180° Panorama: Switch the live view image to the 180° panorama view. …
• Page 79
  Network Video Recorder User Manual 3.3 Adjusting Live View Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
• Page 80
  Network Video Recorder User Manual Figure 3-8 Live View- Camera Order 1) Select a View mode in , including 1/4/6/8/16/25/32/36/64-window division modes are supported depending on different models. 2) Select the small window, and double-click on the channel number to display the channel on the window.
• Page 81
  Network Video Recorder User Manual 3.4 Channel-zero Encoding Purpose: Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client Management System) software, in order to decrease the bandwidth requirement without affecting the image quality, channel-zero encoding is supported as an option for you. Step 1 Enter the Live View Settings interface.
• Page 82
  Network Video Recorder User Manual Chapter 4 PTZ Controls 4.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Step 1 Enter the PTZ Settings interface. Menu >Camera>…
• Page 83
  Network Video Recorder User Manual Step 3 Choose the camera for PTZ setting in the Camera dropdown list. Step 4 Enter the parameters of the PTZ camera. All the parameters should be exactly the same as the PTZ camera parameters. Step 5 Click Apply button to save the settings.
• Page 84
  Network Video Recorder User Manual 4.2 Setting PTZ Presets, Patrols & Patterns Before you start: Please make sure that the presets, patrols and patterns should be supported by PTZ protocols. 4.2.1 Customizing Presets Purpose: Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.
• Page 85
  Network Video Recorder User Manual This feature enables the camera to point to a specified position such as a window when an event takes place. Step 1 Click the button PTZ in the lower-right corner of the PTZ setting interface; Or press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the right-click menu to show the PTZ control panel.
• Page 86
  Network Video Recorder User Manual Figure 4-5 PTZ Settings Step 2 Select patrol No. in the drop-down list of patrol. Step 3 Click the Set button to add key points for the patrol. Figure 4-6 Key point Configuration Step 4 Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol.
• Page 87
  Network Video Recorder User Manual Or press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the right-click menu to show the PTZ control panel. Step 2 Click the button to show the general settings of the PTZ control.
• Page 88
  Network Video Recorder User Manual Step 3 Click the Start button and click corresponding buttons in the control panel to move the PTZ camera, and click the Stop button to stop it. The movement of the PTZ is recorded as the pattern. 4.2.6 Calling Patterns Purpose: Follow the procedure to move the PTZ camera according to the predefined patterns.
• Page 89
  180º. 4.2.8 Calling Linear Scan Before operating this function, make sure the connected camera supports the linear scan and is in HIKVISION protocol. Purpose: Follow the procedure to call the linear scan in the predefined scan range.
• Page 90
  4.2.9 One-touch Park Before operating this function, make sure the connected camera supports the linear scan and is in HIKVISION protocol. Purpose: For some certain model of the speed dome, it can be configured to start a predefined park action (scan, preset, patrol and etc.) automatically after a period of inactivity (park time).
• Page 91
  Network Video Recorder User Manual Step 3 There are 3 one-touch park types selectable, click the corresponding button to activate the park action. Park (Quick Patrol): The dome starts patrol from the predefined preset 1 to preset 32 in order after the park time. The undefined preset will be skipped. Park (Patrol 1): The dome starts move according to the predefined patrol 1 path after the park time.
• Page 92
  Network Video Recorder User Manual 4.3 PTZ Control Panel To enter the PTZ control panel, there are two ways supported. OPTION 1: In the PTZ settings interface, click the PTZ button on the lower-right corner which is next to the Back button.
• Page 93
  Network Video Recorder User Manual Table 4-1 Description of the PTZ panel icons Icon Description Icon Description Icon Description Direction button and the Zoom+, Focus+, Zoom-, Focus-, auto-cycle Iris+ Iris- button The speed of Light on/off Wiper on/off movement Image 3D Positioning Menu Centralization…
• Page 94
  Network Video Recorder User Manual Chapter 5 Recording and Capture Settings The picture capture is supported by the DS-7600/7700/8600/9600-I (/P) series NVR only. 5.1 Configuring Parameters Purpose: By configuring the parameters you can define the parameters which affect the image quality, such as the transmission stream type, the resolution and so on.
• Page 95
  Network Video Recorder User Manual Figure 5-3 Recording Parameters Step 2 Parameters Setting for Recording 1) Select Record tab page to configure. You can configure the stream type, the resolution, and other parameters on your demand. Video Encode: select the video encoding to H.265 or H.264. Enable H.264+ Mode: check the checkbox to enable.
• Page 96
  Network Video Recorder User Manual Pre-record: The time you set to record before the scheduled time or event. For example, when an alarm triggers the recording at 10:00, and if you set the pre-record time as 5 seconds, the camera records at 9:59:55. Post-record: The time you set to record after the event or the scheduled time.
• Page 97
  Network Video Recorder User Manual Figure 5-5 Sub-stream Parameters 2) Configure the parameters of the camera. 3) Click Apply to save the settings. Step 4 Parameters Settings for Capture 1) Select the Capture tab. Figure 5-6 Capture Parameters 2) Configure the parameters. 3) Click Apply to save the settings.
• Page 98
  Network Video Recorder User Manual 5.2 Configuring Recording and Capture Schedule Purpose: Set the record schedule, and then the camera automatically starts/stops recording according to the configured schedule. In this chapter, we take the record schedule procedure as an example, and the same procedure can be applied to configure schedule for both recording and capture.
• Page 99
  Network Video Recorder User Manual M&A: recording triggered by motion detection and alarm. POS: recording triggered by POS and alarm. (Supported by I series NVR only) You can delete the set schedule by clicking the None icon. 2) Choose the camera you want to configure. 3) Select the check box after the Enable Schedule item.
• Page 100
  Network Video Recorder User Manual IV. Select the record type in the dropdown list.  To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video Content Analysis) triggered recording and capture, you must configure the motion detection settings, alarm input settings or VCA settings as well.
• Page 101
  Network Video Recorder User Manual Figure 5-10 Draw the Schedule II. Click the Apply button to validate the settings. Step 3 (Optional) If the settings can also be used to other channels, click Copy, and then choose the channel to which you want to copy. Step 4 Click Apply to save the settings.
• Page 102
  Network Video Recorder User Manual 5.3 Configuring Motion Detection Recording and Capture Purpose: Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center and so on.
• Page 103
  Network Video Recorder User Manual Figure 5-13 Motion Detection Handling 1) Select the channels which you want the motion detection event to trigger recording. 2) Click Apply to save the settings. 3) Click OK to back to the upper level menu. 4) Exit the Motion Detection menu.
• Page 104
  Network Video Recorder User Manual 5.4 Configuring Alarm Triggered Recording and Capture Purpose: Follow the procedure to configure alarm triggered recording or capture. Step 1 Enter the Alarm settings interface. Menu> Configuration> Alarm Figure 5-14 Alarm Settings Step 2 Click Alarm Input. Figure 5-15 Alarm Settings- Alarm Input 1) Select Alarm Input number and configure alarm parameters.
• Page 105
  Network Video Recorder User Manual Figure 5-16 Alarm Settings 5) Choose the alarm triggered recording channel. 6) Check the checkbox to select channel. 7) Click Apply to save settings. Click OK to back to the upper level menu. Repeat the above steps to configure other alarm input parameters. If the settings can also be applied to other alarm inputs, click Copy and choose the alarm input number.
• Page 106
  Network Video Recorder User Manual 5.5 Configuring VCA Event Recording Purpose: The event triggered recording can be configured through the menu. Then events include the motion detection, alarm and VCA events (face detection/face capture, line crossing detection, intrusion detection, region entrance detection, region exiting detection, loitering detection, people gathering detection, fast moving detection, parking detection, unattended baggage detection, object removal detection, audio loss exception detection, sudden change of sound intensity detection, and defocus detection).
• Page 107
  Network Video Recorder User Manual Figure 5-19 Set Trigger Camera of VCA Alarm The PTZ Linking function is only available for the VCA settings of IP cameras. Step 6 Enter Record Schedule settings interface (Menu > Record > Schedule > Record Schedule), and then set VCA as the record type.
• Page 108
  Network Video Recorder User Manual 5.6 Manual Recording and Continuous Capture Purpose: Follow the steps to set parameters for the manual recording and continuous capture. Using manual recording and continuous capture, you need to manually cancel the record and capture. The manual recording and manual continuous capture is prior to the scheduled recording and capture.
• Page 109
  Network Video Recorder User Manual Green icon means that the channel is configured the capture schedule. After rebooting, all the continuous capture will be canceled.
• Page 110
  Network Video Recorder User Manual 5.7 Configuring Holiday Recording and Capture Purpose: Follow the steps to configure the record or capture schedule on holiday for that year. You may want to have different plan for recording and capture on holiday. Step 1 Enter the Record setting interface.
• Page 111
  Network Video Recorder User Manual 2) Check the checkbox after Enable Holiday. 3) Select Mode from the dropdown list. 4) There are three different modes for the date format to configure holiday schedule. 5) Set the start and end date. 6) Click Apply to save settings.
• Page 112
  Network Video Recorder User Manual 5.8 Configuring Redundant Recording and Capture Purpose: Enabling redundant recording and capture, which means saving the record files and captured pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and reliability.
• Page 113
  Network Video Recorder User Manual 2) Click More Settings to enter the following interface. Figure 5-26 Record Parameters 3) Select Camera you want to configure in the drop-down list. 4) Check the checkbox of Redundant Record/Capture. 5) Click OK to save settings and back to the upper level menu. Repeat the above steps for configuring other channels.
• Page 114
  Network Video Recorder User Manual 5.9 Configuring HDD Group for Recording and Capture Purpose: You can group the HDDs and save the record files and captured pictures in certain HDD group. Step 1 Enter HDD setting interface. Menu>HDD Figure 5-27 HDD General Step 2 Select Advanced on the left side menu.
• Page 115
  Network Video Recorder User Manual 5.10 Files Protection Purpose: You can lock the recording files or set the HDD property to Read-only to protect the record files from being overwritten. 5.10.1 Locking the Recording Files  Lock File when Playback Step 1 Enter Playback interface.
• Page 116
  Network Video Recorder User Manual Figure 5-30 Locked File Management In the File Management interface, you can also click to change it to to unlock the file and the file is not protected.  Lock File when Export Step 1 Enter Export setting interface. Menu>…
• Page 117
  Network Video Recorder User Manual Step 5 Protect the record files. Find the record files you want to protect, and then click the icon which will turn to , indicating that the file is locked. The record files of which the recording is still not completed cannot be locked. 2) Click to change it to to unlock the file and the file is not protected.
• Page 118
  Network Video Recorder User Manual Step 4 Click OK to save settings and back to the upper level menu.  You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the property to R/W. …
• Page 119
  Network Video Recorder User Manual Chapter 6 Playback 6.1 Playing Back Record Files 6.1.1 Instant Playback Purpose Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported. Instant playback by channel Choose a channel in live view mode and click the button in the quick setting toolbar.
• Page 120
  Network Video Recorder User Manual Figure 6-2 Right-click Menu under Live View Pressing numerical buttons will switch playback to the corresponding channels during playback process. Playback by Time Purpose Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch are supported.
• Page 121
  Network Video Recorder User Manual Figure 6-3 Playback Calendar If there are record files for that camera in that day, in the calendar, the icon for that day is displayed in different colors for different recording types: blue for continuous recording and red for event recording.
• Page 122
  Network Video Recorder User Manual  The indicates the start/end time of the recorded video files.  Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate specific frames. Table 6-1 Detailed Explanation of Playback Toolbar Item Button…
• Page 123
  Network Video Recorder User Manual Item Button Operation Button Operation Expansion PTZ expansion Fisheye Enable/Disable POS information overlay (Supported series NVR only)  The fisheye expansion view feature is supported by the DS-7600/7700/8600/9600-I (/P) series NVR only.  Please refer to the Chapter 3.2.5 Fisheye Expansion for the description and operation of the fisheye expansion.
• Page 124
  Network Video Recorder User Manual Figure 6-6 Playback by Smart Search Step 6 Click the radio button to switch to the playback by smart search. Step 7 Set the rules and areas for smart search of line crossing detection, intrusion detection or motion detection event triggered recording.
• Page 125
  Network Video Recorder User Manual Figure 6-7 Set Result Filter Step 9 (Optional) Click to enter the Smart Settings to configure the related parameters. Skip the Non-Related Video: check the checkbox to enable the device to skip non-related video files. Play Non-Related Video: set the playing speed to 8X/4X/2X/1X when playing the non-related video files.
• Page 126
  Network Video Recorder User Manual 6.1.4 Playing Back by Event Search Purpose Play back record files on one or several channels searched out by event type (e.g., alarm input, motion detection and VCA). Step 1 Enter the Playback interface. Menu>Playback Step 2 Select the Event in the drop-down list on the top-left side.
• Page 127
  Network Video Recorder User Manual Step 7 Click Search button to get the search result information. You may refer to the right-side bar for the result. For the POS event type (supported by I series NVR), you can enter the Keyword and enable the Case Sensitivity (upper case and lower case) to search the video files with the keyword contained POS information.
• Page 128
  Network Video Recorder User Manual Figure 6-11 Interface of Playback by Event You can click button to select the previous or next event. Please refer to Table 6.1 for the description of buttons on the toolbar. 6.1.5 Playing Back by Tag Purpose: Video tag allows you to record related information like people and location of a certain time point during playback.
• Page 129
  Network Video Recorder User Manual Figure 6-12 Interface of Playback by Time Click button to add default tag. Click button to add customized tag and input tag name. Max. 64 tags can be added to a single video file. Step 3 Tag management. Click button to enter the File Management interface and click Tag to manage the tags.
• Page 130
  Network Video Recorder User Manual Playing back by Tag Step 1 Select the Tag from the drop-down list in the Playback interface. Step 2 Select the stream to Main Stream or Sub Stream. Step 3 Choose channels, edit start time and end time, and then click Search to enter Search Result interface.
• Page 131
  Network Video Recorder User Manual Step 2 Menu>Playback Step 3 Select Sub-periods from the drop-down list in the upper-left corner of the page to enter the Sub-periods Playback interface. Step 4 Select the stream to Main Stream or Sub Stream. Step 5 Select a date and start playing the video file.
• Page 132
  Network Video Recorder User Manual Figure 6-16 System Log Search Interface Step 4 Choose a log with record file and click button to enter Playback interface. If there is no record file at the time point of the log, the message box “No result found” will pop Figure 6-17 Result of System Log Search Step 5 Playback interface.
• Page 133
  Network Video Recorder User Manual Figure 6-18 Interface of Playback by Log 6.1.8 Playing Back External File Purpose: Perform the following steps to look up and play back files in the external devices. Step 1 Enter Tag Search interface. Menu>Playback Step 2 Select the External File in the drop-down list on the top-left side.
• Page 134
  Network Video Recorder User Manual 6.1.9 Playing Back Pictures The playback by picture is supported by the DS-9600/8600/7700/7600NI-I (/P) series NVR only. Purpose: The captured pictures stored in the HDDs of the device can be searched and viewed. Step 1 Enter Playback interface. Menu>Playback Step 2 Select Picture from the drop-down list in the upper-left corner of the page to enter the Picture Playback interface.
• Page 135
  Network Video Recorder User Manual Figure 6-21 Picture Playback Toolbar Table 6-2 Detailed Explanation of Picture-playback Toolbar Button Function Button Function Button Function Button Function Previous Play reverse Play Next picture picture 6.2 Auxiliary Functions of Playback 6.2.1 Playing Back Frame by Frame Purpose: Play video files frame by frame, in case of checking image details of the video when abnormal events happen.
• Page 136
  Network Video Recorder User Manual Figure 6-22 Thumbnails View The thumbnail view is supported only in the 1X single-camera playback mode. 6.2.3 Fast View You can hold the mouse to drag on the time bar to get the fast view of the video files. Step 1 Enter the playback interface and start to play the video files.
• Page 137
  Network Video Recorder User Manual Figure 6-23 Draw Area for Digital Zoom Step 3 Right-click the image to exit the digital zoom interface. 6.2.5 File Management You can manage the video clips, captured pictures in playback, locked files and tags you have added in the playback mode.
• Page 138
  Network Video Recorder User Manual Chapter 7 Backup 7.1 Backing up Record Files 7.1.1 Quick Export Purpose: Export record files to backup device(s) quickly. Step 1 Enter Video Export interface. Menu>Export>Normal Choose the channel(s) you want to back up and click Quick Export button. The time duration of record files on a specified channel cannot exceed one day.
• Page 139
  Network Video Recorder User Manual Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup devices supported by the NVR. Figure 7-2 Quick Export using USB1-1 Stay in the Exporting interface until all record files are exported. Figure 7-3 Export Finished Step 4 Check backup result.
• Page 140
  Network Video Recorder User Manual Figure 7-4 Checkup of Quick Export Result Using USB1-1 7.1.2 Backing up by Normal Video/Picture Search Purpose: The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB writer), SATA writer and e-SATA HDD.
• Page 141
  Network Video Recorder User Manual Figure 7-5 Normal Video Search for Backup Step 4 Select video files or pictures from the Chart or List to export. Click to play the record file if you want to check it. Check the checkbox before the record files you want to back up. The size of the currently selected files is displayed in the lower-left corner of the window.
• Page 142
  Network Video Recorder User Manual Or you can select recording files you want to back up, and click Export button to enter Export interface. If the inserted USB device is not recognized:  Click the Refresh button.  Reconnect device. …
• Page 143
  Network Video Recorder User Manual 7.1.3 Backing up by Event Search Purpose: Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), SATA writer or eSATA HDD. Quick Backup and Normal Backup are supported. Step 1 Enter Export interface. Menu>Export>Event Step 2 Select the cameras to search.
• Page 144
  Network Video Recorder User Manual Figure 7-10 Result of Event Search Step 6 Export the video files. Please refer to step5 of Chapter 7.1.2 Backing up by Normal Video Search for details. 7.1.4 Backing up Video Clips or Captured Playback Pictures Purpose: You may also select video clips or captured pictures in playback mode to export directly during Playback, using USB devices (USB flash drives, USB HDDs, USB writer), SATA writer or eSATA HDD.
• Page 145
  Network Video Recorder User Manual 7.2 Managing Backup Devices Management of USB flash drives, USB HDDs and eSATA HDDs Step 1 Enter the Export interface. Figure 7-12 Storage Device Management Step 2 Backup device management. Click New Folder button if you want to create a new folder in the backup device. Select a record file or folder in the backup device and click button if you want to delete Click Erase button if you want to erase the files from a re-writable CD/DVD.
• Page 146
  Network Video Recorder User Manual 7.3 Hot Spare Device Backup Purpose: The device can form an N+1 hot spare system. The system consists of several working devices and a hot spare device; when the working device fails, the hot spare device switches into operation, thus increasing the reliability of the system.
• Page 147
  Network Video Recorder User Manual Figure 7-14 Reboot Attention Step 4 Click the Yes button in the pop-up attention box. 7.3.3 Setting Working Device Step 1 Enter the Hot Spare settings interface. Step 2 Menu > Configuration > Hot Spare Step 3 Set the Work Mode as Normal Mode (default).
• Page 148
  Network Video Recorder User Manual Figure 7-16 Add Working Device Step 3 You can view the working status of the hot spare device on the Working Status list. When the working device works properly, the working status of the hot spare device is displayed as No record.
• Page 149
  Network Video Recorder User Manual The record synchronization function can be enabled for 1 working device at a time. Figure 7-19 Synchronizing…
• Page 150
  Network Video Recorder User Manual Chapter 8 Alarm Settings 8.1 Setting Motion Detection Alarm Step 1 Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion detection. Menu> Camera> Motion Figure 8-1 Motion Detection Setup Interface Step 2 Set up detection area and sensitivity.
• Page 151
  Network Video Recorder User Manual Step 4 Set up arming schedule of the channel. 1) Select Arming Schedule tab to set the arming schedule of handling actions for the motion detection. 2) Choose one day of a week and up to eight time periods can be set within each day. 3) Click Apply to save the settings Time periods shall not be repeated or overlapped.
• Page 152
  Network Video Recorder User Manual 8.2 Setting Sensor Alarms Purpose: Set the handling action of an external sensor alarm. Step 1 Enter Alarm Settings of System Configuration and select an alarm input. Menu> Configuration> Alarm Select Alarm Input tab to enter Alarm Input Settings interface. Figure 8-4 Alarm Status Interface of System Configuration Step 2 Set up the handling action of the selected alarm input.
• Page 153
  Network Video Recorder User Manual When the alarm input 1 (Local<-1) is enabled with one-key disarming, the other alarm input settings are not configurable. Step 4 Select Trigger Channel tab and select one or more channels which will start to record/capture or become full-screen monitoring when an external alarm is input, and click Apply to save the settings.
• Page 154
  Network Video Recorder User Manual Figure 8-7 Set PTZ Linking of Alarm Input Step 8 If you want to set handling action of another alarm input, repeat the above steps. Or you can click the Copy button on the Alarm Input Setup interface and check the checkbox of alarm inputs to copy the settings to them.
• Page 155
  Network Video Recorder User Manual 8.3 Detecting Video Loss Alarm Purpose: Detect video loss of a channel and take alarm response action(s). Step 1 Enter Video Loss interface of Camera Management and select a channel you want to detect. Menu> Camera> Video Loss Figure 8-9 Video Loss Setup Interface Step 2 Set up handling action of video loss.
• Page 156
  Network Video Recorder User Manual Figure 8-10 Set Arming Schedule of Video Loss Step 4 Select Linkage Action tab to set up alarm response action of video loss (please refer to Chapter Setting Alarm Response Actions). Step 5 Click the OK button to complete the video loss settings of the channel.
• Page 157
  Network Video Recorder User Manual 8.4 Detecting Video Tampering Alarm Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Step 1 Enter Video Tampering interface of Camera Management and select a channel you want to detect video tampering. Menu>…
• Page 158
  Network Video Recorder User Manual Figure 8-12 Set Arming Schedule of Video Tampering Step 4 Select Linkage Action tab to set up alarm response actions of video tampering alarm (please refer to Chapter Setting Alarm Response Actions). Step 5 Click the OK button to complete the video tampering settings of the channel.
• Page 159
  Network Video Recorder User Manual 8.5 Handling Exceptions Alarm Purpose: Exception settings refer to the handling action of various exceptions, e.g.  HDD Full: The HDD is full.  HDD Error: Writing HDD error or unformatted HDD.  Network Disconnected: Disconnected network cable. …
• Page 160
  Network Video Recorder User Manual 8.6 Setting Alarm Response Actions Purpose: Alarm response actions will be activated when an alarm or exception occurs, including Event Hint Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm Output and Send Email. Event Hint Display When an event or exception happens, a hint can be displayed on the lower-left corner of live view image.
• Page 161
  Network Video Recorder User Manual If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to Menu >Configuration>Live View > Full Screen Monitoring Dwell Time. Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.
• Page 162
  Network Video Recorder User Manual If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going to Menu> Manual> Alarm. Figure 8-16 Alarm Output Setup Interface Step 3 Set up arming schedule of the alarm output. Choose one day of a week and up to 8 time periods can be set within each day.
• Page 163
  Network Video Recorder User Manual Figure 8-18 Copy Settings of Alarm Output…
• Page 164
  Network Video Recorder User Manual 8.7 Triggering or Clearing Alarm Output Manually Purpose: Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dropdown list of dwell time of an alarm output, the alarm can be cleared only by clicking Clear button in the following interface.
• Page 165
  Network Video Recorder User Manual Chapter 9 POS Configuration The POS feature is supported by DS-9600/8600/7700/7600-I (/P) series NVR only. 9.1 Configuring POS Settings Step 1 Enter the POS settings interface. Menu > Configuration > POS> POS Settings Step 2 Select the POS from the drop-down list. The amount of POS devices supported for each device is the half of its channel amount, e.g., 8 POS devices are supported for the DS-9616NI-I8 model.
• Page 166
  Network Video Recorder User Manual When the new protocol is selected, you should reboot the device to activate the new settings.  Universal Protocol Click the Advanced button to expand more settings when selecting the universal protocol. You can set the start line tag, line break tag and end line tag for the POS overlay characters, and the case-sensitive property of the characters.
• Page 167
  Network Video Recorder User Manual The NUCLEUS protocol must be used in the RS-232 connection communication. Step 5 Select the connection mode to TCP, UDP, Multicast, RS-232, USB->RS-232 or Sniff, and click Set to configure the parameters for each connection mode. …
• Page 168
  Network Video Recorder User Manual  RS-232 Connection Connect the NVR and the POS machine via RS-232. The RS-232 settings can be configured in Menu>Configuration>RS-232. The Usage must be set to Transparent Channel. Figure 9-8 RS-232 Settings  Multicast Connection When connecting the NVR and the POS machine via Multicast protocol, set the multicast address and port.
• Page 169
  Network Video Recorder User Manual 3) Select the font size to small, medium or large. 4) Set the overlay time of the characters. The value ranges 5 -3600 sec. 5) Set the delay time of POS event. The value ranges 5 -3600 sec. When the device has not received the POS message over the defined delay time, the transaction is finished.
• Page 170
  Network Video Recorder User Manual 9.2 Configuring Overlay Channel Purpose: You can assign the POS machine to corresponding channel on which you want to overlay. Step 1 Enter the POS settings interface. Menu > Configuration > POS> Overlay Channel Step 2 Click to select the IP camera from the camera list on the right, and then click a POS item from the POS device list you want to overlay the POS information on the selected camera.
• Page 171
  Network Video Recorder User Manual 9.3 Configuring POS Privacy Information Filtering Purpose: You can set the POS privacy information to not display on the image. Step 1 Enter the POS settings interface. Menu > Configuration > POS> POS Settings Step 2 Click the button of the Privacy Settings to enter the POS privacy information filtering settings interface.
• Page 172
  Network Video Recorder User Manual Figure 9-15 Set Trigger Cameras of POS Step 4 Click Trigger Channel tab and select one or more channels to record or become full-screen monitoring when POS alarm is triggered. Step 5 Set arming schedule of the channel. Select Arming Schedule tab to set the channel’s arming schedule.
• Page 173
  Network Video Recorder User Manual Set PTZ linking parameters and click the OK button to complete the settings of the alarm input. Please check whether the PTZ or speed dome supports PTZ linkage. Figure 9-17 Set PTZ Linking Step 8 Click OK to save the settings.
• Page 174
  Network Video Recorder User Manual Chapter 10 VCA Alarm The NVR supports the VCA detection alarm (face detection, vehicle detection, line crossing detection and intrusion detection, region entrance detection, region exiting detection, unattended baggage detection, object removal detection, audio loss exception detection, sudden change of sound intensity detection, and defocus detection) sent by IP camera.
• Page 175
  Network Video Recorder User Manual Figure 10-1 Face Detection Step 3 Select the VCA detection type to Face Detection. Step 4 Check the Enable checkbox to enable this function. Step 5 Click to enter the face detection settings interface. Configure the trigger channel, arming schedule and linkage action for the face detection alarm.
• Page 176
  Network Video Recorder User Manual 10.2 Vehicle Detection Purpose: Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed vehicle can be detected and the picture of its license plate can be captured. You can send alarm signal to notify the surveillance center and upload the captured picture to FTP server.
• Page 177
  Network Video Recorder User Manual Step 7 Click the Rule Settings to enter the rule settings interface. Configure the lane, upload picture and overlay content settings. Up to 4 lanes are selectable. Figure 10-4 Rule Settings Step 8 Click Save to save the settings. Please refer to the User Manual of Network Camera for the detailed instructions for the vehicle detection.
• Page 178
  Network Video Recorder User Manual Step 6 Click the Rule Settings button to set the line crossing detection rules. 1) Select the direction to A<->B, A->B or A<-B. A<->B: Only the arrow on the B side shows; when an object going across the configured line with both direction can be detected and alarms are triggered.
• Page 179
  Network Video Recorder User Manual Figure 10-6 Draw Line for Line Crossing Detection Step 8 Click Apply to activate the settings.
• Page 180
  Network Video Recorder User Manual 10.4 Intrusion Detection Purpose: Intrusion detection function detects people, vehicle or other objects which enter and loiter in a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered. Step 1 Enter the VCA settings interface. Menu>…
• Page 181
  Network Video Recorder User Manual 5) Click-OK to save the rule settings and back to the line crossing detection settings interface. Step 7 Click and draw a quadrilateral in the preview window by specifying four vertexes of the detection region, and right click to complete drawing. Only one region can be configured.
• Page 182
  Network Video Recorder User Manual 10.5 Region Entrance Detection Purpose: Region entrance detection function detects people, vehicle or other objects which enter a pre-defined virtual region from the outside place, and some certain actions can be taken when the alarm is triggered. Step 1 Enter the VCA settings interface.
• Page 183
  Network Video Recorder User Manual Figure 10-9 Set Region Entrance Detection Up to 4 rules can be configured. Step 8 Click Apply to save the settings. 10.6 Region Exiting Detection Purpose: Region exiting detection function detects people, vehicle or other objects which exit from a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
• Page 184
  Network Video Recorder User Manual  Please refer to the Chapter 9.4 Intrusion Detection for operating steps to configure the unattended baggage detection.  The Threshold[5s-20s] in the Rule Settings defines the time of the objects left over in the region.
• Page 185
  Network Video Recorder User Manual Step 3 Select the VCA detection type to Audio Exception Detection. Step 4 Click to configure the trigger channel, arming schedule and linkage action for the face detection alarm. Step 5 Click the Rule Settings button to set the audio exception rules. Figure 10-10 Set Audio Exception Detection Rules 1) Check the checkbox of Audio Input Exception to enable the audio loss detection function.
• Page 186
  Network Video Recorder User Manual  Please refer to the Chapter 9.2 Face Detection for operating steps to configure the scene change detection.  The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the value is, the more easily the change of scene can trigger the alarm.
• Page 187
  Network Video Recorder User Manual Chapter 11 VCA Search With the configured VCA detection, the NVR supports the VCA search for the behavior analysis, face capture, people counting and heat map results. 11.1 Face Search Purpose: When there are detected face picture captured and saved in HDD, you can enter the Face Search interface to search the picture and play the picture related video file according to the specified conditions.
• Page 188
  Network Video Recorder User Manual Figure 11-2 Face Search Interface Step 5 Play the face picture related video file. You can double click on a face picture to play its related video file in the view window on the top right, or select a picture item and click to play it.
• Page 189
  Network Video Recorder User Manual The behavior analysis detects a series of suspicious behavior based on VCA detection, and certain linkage methods will be enabled if the alarm is triggered. Step 1 Enter the Behavior Search interface. Menu>VCA Search> Behavior Search Step 2 Select the camera (s) for the behavior search.
• Page 190
  Network Video Recorder User Manual Figure 11-5 Behavior Search Results Step 6 Play the behavior analysis picture related video file. You can double click on a picture from the list to play its related video file in the view window on the top right, or select a picture item and click to play it.
• Page 191
  Network Video Recorder User Manual Figure 11-6 Plate Search Step 4 Select the country from the drop-down list for searching the location of the vehicle plate. Step 5 Input the plate No. in the field for search. Step 6 Click Search to start searching. The search results of detected vehicle plate pictures are displayed in list or in chart.
• Page 192
  Network Video Recorder User Manual Figure 11-7 People Counting Interface Step 7 You can click the Export button to export the statistics report in excel format. 11.5 Heat Map Purpose: Heat map is a graphical representation of data represented by colors. The heat map function is usually used to analyze the visit times and dwell time of customers in a configured area.
• Page 193
  Network Video Recorder User Manual Figure 11-8 Heat Map Interface Step 5 Click the Counting button to export the report data and start heat map statistics, and the results are displayed in graphics marked in different colors. As shown in the figure above, red color block (255, 0, 0) indicates the most welcome area, and blue color block (0, 0, 255) indicates the less-popular area.
• Page 194
  Network Video Recorder User Manual 11.6 Advanced Search The DS-7600/7700/8600/9600-I (/P) series NVR supports the advanced search for fire/ship/temperature/temperature difference detection triggered alarm and the recorded video files and pictures. Before you start To get the smart search result, the corresponding fire/ship temperature/temperature difference type must be enabled and configured on the connected thermal network camera (Configuration >…
• Page 195
  Network Video Recorder User Manual Figure 11-10 Search Results Step 6 You can click the Export button to export the statistics report in excel format.
• Page 196
  Network Video Recorder User Manual Chapter 12 Network Settings 12.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate NVR over network. Step 1 Enter the Network Settings interface. Menu >Configuration>Network Step 2 Select the General tab. Figure 12-1 Network Settings Interface Step 3 In the General Settings interface, you can configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU, DNS DHCP and DNS Server.
• Page 197
  Network Video Recorder User Manual  Two self-adaptive 10M/100M/1000M network interfaces for DS-9600NI-I8, DS-9600NI-I16, DS-8600NI-K8, DS-7700NI-I4 and DS-7700NI-K4, and the multi-address and network fault tolerance working modes are configurable.  One self-adaptive 10M/100M/1000M network interface for DS-7600NI-K2/I2(/P), DS-7700NI-I4/P and DS-7700NI-K4/P. …
• Page 198
  Network Video Recorder User Manual 12.2 Configuring Advanced Settings 12.2.1 Configuring Hik-Connect Purpose Hik-Connect enables the mobile phone application and the service platform page (www.hik-connect.com) to access and manage your connected NVR, providing a convenient remote access to the surveillance system. The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser.
• Page 199
  Network Video Recorder User Manual Figure 12-3 Service Terms 1) Create the verification code and enter the code in the Verification Code text field. 2) Check the checkbox of The Hik-Connect service will require internet access. Please read Service Terms and Privacy Statement before enabling the service. 3) Scan the QR code on the interface to read the Service Terms and the Privacy Statement.
• Page 200
  Network Video Recorder User Manual Figure 12-4 Hik-Connect Settings Interface Step 6 Click the Apply button to save the settings. After configuration, you can access and manage the NVR by your mobile phone on which the Hik-Connect application is installed or by the website (www.hik-connect.com). Please refer to the help file on the official website (www.hik-connect.com) and the Hik-Connect Mobile Client User Manual for adding the device to Hik-Connect and more operation instructions.
• Page 201
  Network Video Recorder User Manual Figure 12-5 DynDNS Settings Interface • PeanutHull: Enter the User Name and Password obtained from the PeanutHull website. Figure 12-6 PeanutHull Settings Interface • NO-IP: Enter the account information in the corresponding fields. Refer to the DynDNS settings.
• Page 202
  Network Video Recorder User Manual A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system date/time. Step 1 Enter the Network Settings interface. Menu > > Network Configuration Step 2 Select the NTP tab to enter the NTP Settings interface, as shown in Figure 12-8. Figure 12-8 NTP Settings Interface Step 3 Check the Enable NTP checkbox to enable this feature.
• Page 203
  Network Video Recorder User Manual Figure 12-9 SNMP Settings Interface Step 3 Check the SNMP checkbox to enable this feature. Step 4 The enabling of SNMP may cause security problems. Click Yes to continue or No to cancel the operation. Figure 12-10 SNMP Settings Interface Step 5 When you choose the Yes option in step4, configure the following SNMP settings: Trap Address: IP Address of SNMP host.
• Page 204
  Network Video Recorder User Manual  Alarm Host IP/Port: With a remote alarm host configured, the device will send the alarm event or exception message to the host when an alarm is triggered. The remote alarm host must have the CMS (Client Management System) software installed. The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client Management System) software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be the same as the alarm monitoring port configured in the software (default port is…
• Page 205
  Network Video Recorder User Manual If you set the port number as 443 and the IP address is 192.0.0.64, you may access the device by inputting https://192.0.0.64:443 via the web browser. The HTTPS port can be only configured through the web browser. Step 1 Open web browser, input the IP address of device, and the web server will select the language automatically according to the system language and maximize the web browser.
• Page 206
  Network Video Recorder User Manual 3) Click OK to save the settings. OPTION 2: Create the authorized certificate 1) Click the Create button to create the certificate request. 2) Download the certificate request and submit it to the trusted certificate authority for signature.
• Page 207
  Network Video Recorder User Manual Figure 12-16 Network Settings Interface Step 3 Click Apply to save the settings. Step 4 Select the Email tab to enter the Email Settings interface. Figure 12-17 Email Settings Interface Step 5 Configure the following Email settings: Enable Server Authentication (optional): Check the checkbox to enable the server authentication feature.
• Page 208
  Network Video Recorder User Manual Receiver: The name of user to be notified. Receiver’s Address: The Email address of user to be notified. Enable Attached Picture: Check the checkbox of Enable Attached Picture if you want to send email with attached alarm images. The interval is the time of two adjacent alarm images. You can also set SMTP port and enable SSL here.
• Page 209
  Network Video Recorder User Manual OPTION 1: Auto If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router automatically. 1) Select Auto in the drop-down list of Mapping Type. 2) Click Apply button to save the settings. 3) You can click Refresh button to get the latest status of the port mapping.
• Page 210
  Network Video Recorder User Manual 3) Click Apply button to save the settings. 4) You can click Refresh button to get the latest status of the port mapping. Figure 12-21 UPnP™ Settings Finished-Manual Step 5 Enter the virtual server setting page of router; fill in the blank of Internal Source Port with the internal port value, the blank of External Source Port with the external port value, and other required contents.
• Page 211
  Network Video Recorder User Manual Figure 12-23 Advanced Settings Interface Step 2 Check the checkbox of the Enable Virtual Host. Step 3 Click the Save button to save the setting. Step 4 Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of the camera list, as shown in the Figure 12-24.
• Page 212
  Network Video Recorder User Manual Figure 12-25 Network Traffic Interface Step 2 You can view the sending rate and receiving rate information on the interface. The traffic data is refreshed every 1 second.
• Page 213
  Network Video Recorder User Manual 12.4 Configuring Network Detection Purpose: You can obtain network connecting status of NVR through the network detection function, including network delay, packet loss, etc. 12.4.1 Testing Network Delay and Packet Loss Step 1 Enter the Network Traffic interface. Menu >Maintenance>Net Detect Step 2 Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 12-26.
• Page 214
  Network Video Recorder User Manual Click Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup device, please check whether it is compatible with the NVR. You can format the backup device if the format is incorrect. Figure 12-28 Export Network Packet Step 4 Click Export button to start exporting.
• Page 215
  Network Video Recorder User Manual Figure 12-30 Network Status Checking If the network is normal the following message box pops out. Figure 12-31 Network Status Checking Result If the message box pops out with other information instead of this one, you can click Network button to show the quick setting interface of the network parameters.
• Page 216
  Network Video Recorder User Manual Figure 12-32 Network Stat. Interface Step 3 Check the bandwidth of IP Camera, bandwidth of Remote Live View, bandwidth of Remote Playback, bandwidth of Net Receive Idle and bandwidth of Net Send Idle. Step 4 You can click Refresh to get the newest status.
• Page 217
  Network Video Recorder User Manual Chapter 13 RAID This chapter is applicable for DS-9600NI-I8 and DS-9600NI-I16 series NVR. 13.1 Configuring Array Purpose: RAID (redundant array of independent disks) is a storage technology that combines multiple disk drive components into a logical unit. A RAID setup stores data over multiple hard disk drives to provide enough redundancy so that data can be recovered if one disk fails.
• Page 218
  Network Video Recorder User Manual Figure 13-1 RAID Working Flow 13.1.2 Enable RAID Purpose: Perform the following steps to enable the RAID function, or the disk array cannot be created. Use the enterprise-level HDDs to create the array.  OPTION 1: Enable the RAID function in the Wizard when the device startup, please refer to step 7 of Chapter 2.2.
• Page 219
  Network Video Recorder User Manual Figure 13-2 Enable RAID Interface Step 2 Check the checkbox of Enable RAID. Step 3 Click the Apply button to save the settings. 13.1.3 One-touch Configuration Purpose: Through one-touch configuration, you can quickly create the disk array. By default, the array type to be created is RAID 5.
• Page 220
  Network Video Recorder User Manual Figure 13-4 One-touch Array Configuration Step 4 Edit the array name in the Array Name text filed and click OK button to start configuring array. If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set by default. It is recommended to set hot spare disk for automatically rebuilding the array when the array is abnormal.
• Page 221
  Network Video Recorder User Manual In this section, we take RAID 5 as an example to describe the manual configuration of array and virtual disk. Step 1 Enter the Physical Disk Settings interface. Menu > HDD > RAID > Physical Disk Figure 13-7 Physical Disk Settings Interface Step 2 Click Creat button to enter the Create Array interface.
• Page 222
  Network Video Recorder User Manual  If you choose RAID 0, at least 2 HDDs must be installed.  If you choose RAID 1, 2 HDDs need to be configured for RAID 1.  If you choose RAID 5, at least 3 HDDs must be installed. …
• Page 223
  Network Video Recorder User Manual 13.2 Rebuilding Array Purpose: The working status of array includes Functional, Degraded and Offline. By viewing the array status, you can take immediate and proper maintenance for the disks so as to ensure the high security and reliability of the data stored in the disk array.
• Page 224
  Network Video Recorder User Manual Figure 1. 2 Array Settings Interface If there is no hot spare disk after rebuilding, it is recommended to install a HDD into the device and set is as a hot spare disk to ensure the high security and reliability of the array. 13.2.3 Manually Rebuilding Array Purpose: If the hot spare disk has not been configured, you can rebuild the array manually to restore the…
• Page 225
  Network Video Recorder User Manual Figure 13-12 Rebuild Array Interface Step 3 Select the available physical disk and click OK button to confirm to rebuild the array. Step 4 The “Do not unplug the physical disk when it is under rebuilding” message box pops up. Click OK button to start rebuilding.
• Page 226
  Network Video Recorder User Manual 13.3 Deleting Array Deleting array will cause to delete all the data saved in the disk. Step 1 Enter the Array Settings interface. Menu>HDD>RAID>Array Figure 13-13 Array Settings Interface Step 2 Select an array and click to delete the array.
• Page 227
  Network Video Recorder User Manual 13.4 Checking and Editing Firmware Purpose: You can view the information of the firmware and set the background task speed on the Firmware interface. Step 1 Enter the Firmware interface to check the information of the firmware, including the version, maximum physical disk quantity, maximum array quantity, auto-rebuild status, etc.
• Page 228
  Network Video Recorder User Manual Chapter 14 HDD Management 14.1 Initializing HDDs Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR. A message box pops up when the NVR starts up if there exits any uninitialized HDD. Figure 14-1 Message Box of Uninitialized HDD Click Yes button to initialize it immediately or you can perform the following steps to initialize the HDD.
• Page 229
  Network Video Recorder User Manual Step 5 Select the OK button to start initialization. Figure 14-4 Status changes to Initializing Step 6 After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal. Figure 14-5 HDD Status Changes to Normal Initializing the HDD will erase all data on it.
• Page 230
  Network Video Recorder User Manual 14.2 Managing Network HDD Purpose: You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Up to 8 network disks can be added. Step 1 Enter the HDD Information interface. Menu >…
• Page 231
  Network Video Recorder User Manual Figure 14-8 Add NAS Disk  Add IP SAN: 1) Enter the NetHDD IP address in the text field. 2) Click the Search button to search the available IP SAN disks. 3) Select the IP SAN disk from the list shown below. 4) Click the OK button to add the selected IP SAN disk.
• Page 232
  Network Video Recorder User Manual Figure 14-10 Initialize Added NetHDD 14.3 Managing eSATA Purpose: When there is an external eSATA device connected to NVR, you can configure eSATA for the use of Record/Capture or Export, and you can manage the eSATA in the NVR. Step 1 Enter the Advanced Record Settings interface.
• Page 233
  Network Video Recorder User Manual 14.4 Managing HDD Group 14.4.1 Setting HDD Groups Purpose: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings. Step 1 Enter the Storage Mode interface. Menu >…
• Page 234
  Network Video Recorder User Manual Figure 14-15 Local HDD Settings Interface Step 7 Select the Group number for the current HDD. The default group No. for each HDD is 1. Step 8 Click the OK button to confirm the settings. Figure 14-16 Confirm HDD Group Settings Step 9 In the pop-up Attention box, click the Yes button to finish the settings.
• Page 235
  Network Video Recorder User Manual Figure 14-17 Set HDD Property Step 3 Set the HDD property to R/W, Read-only or Redundancy. Step 4 Click the OK button to save the settings and exit the interface. Step 5 In the HDD Information menu, the HDD property will be displayed in the list. At least 2 hard disks must be installed on your NVR when you want to set a HDD to Redundancy, and there is one HDD with R/W property.
• Page 236
  Network Video Recorder User Manual 14.5 Configuring Quota Mode Purpose: Each camera can be configured with allocated quota for the storage of recorded files or captured pictures. Step 1 Enter the Storage Mode interface. Menu > HDD > Advanced Step 2 Set the Mode to Quota, as shown in Figure 14-18. The NVR must be rebooted to enable the changes to take effect.
• Page 237
  Network Video Recorder User Manual Figure 14-20 Copy Settings to Other Camera(s) Step 6 Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP Camera to select all cameras. Step 7 Click the OK button to finish the Copy settings and back to the Storage Mode interface. Step 8 Click the Apply button to apply the settings.
• Page 238
  Network Video Recorder User Manual 14.6 Configuring Disk Clone Purpose: If the S.M.A.R.T. detection result declares the HDD is abnormal, you can choose to clone all the data on the HDD to an inserted eSATA disk manually. Refer to Chapter 12.8 HDD Detection for details of S.M.A.R.T detection.
• Page 239
  Network Video Recorder User Manual The capacity of destination disk must be the same as that of the clone source disk. Step 4 Check the checkbox of the HDD to be cloned in the Clone Source list. Step 5 Click the Clone button and a message box pops up. Figure 14-23 Message Box for Disk Clone Step 6 Click the Yes button to continue.
• Page 240
  Network Video Recorder User Manual 14.7 Checking HDD Status Purpose: You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case of HDD failure. Checking HDD Status in HDD Information Interface Step 1 Enter the HDD Information interface.
• Page 241
  Network Video Recorder User Manual Figure 14-26 View HDD Status (2)
• Page 242
  Network Video Recorder User Manual 14.8 HDD Detection Purpose: The device provides the HDD detection function such as the adopting of the S.M.A.R.T. and the Bad Sector Detection technique. The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.
• Page 243
  Network Video Recorder User Manual Step 4 Select the HDD No. in the dropdown list you want to configure, and choose All Detection or Key Area Detection as the detection type. Step 5 Click the Detect button to start the detection. Figure 14-28 Bad Sector Detection And you can click Error info button to see the detailed damage information.
• Page 244
  Network Video Recorder User Manual 14.9 Configuring HDD Error Alarms Purpose: You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal. Step 1 Enter the Exception interface. Menu > Configuration > Exceptions Step 2 Select the Exception Type to HDD Error from the dropdown list. Step 3 Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 14-29.
• Page 245
  Network Video Recorder User Manual Chapter 15 Camera Settings 15.1 Configuring OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc. Step 1 Enter the OSD Configuration interface. Menu > Camera > OSD Step 2 Select the camera to configure OSD settings.
• Page 246
  Network Video Recorder User Manual 15.2 Configuring Privacy Mask Purpose: You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy mask can prevent certain surveillance areas to be viewed or recorded. Step 1 Enter the Privacy Mask Settings interface.
• Page 247
  Network Video Recorder User Manual Figure 15-3 Set Privacy Mask Area Step 6 Click the Apply button to save the settings.
• Page 248
  Network Video Recorder User Manual 15.3 Configuring Video Parameters Purpose: You can customize the image parameters including the brightness, contrast, saturation, image rotate and mirror for the live view and recording effect. Step 1 Enter the Image Settings interface. Menu > Camera >Image Figure 15-4 Image Settings Interface Step 2 Select the camera to set image parameters.
• Page 249
  Network Video Recorder User Manual Chapter 16 NVR Management and Maintenance 16.1 Viewing System Information Step 1 Enter the System Information interface. Menu >Maintenance>System Info Step 2 You can click the Device Info, Camera, Record, Alarm, Network and HDD tabs to view the system information of the device.
• Page 250
  Network Video Recorder User Manual 16.2 Searching & Exporting Log Files Purpose: The operation, alarm, exception and information of the NVR can be stored in log files, which can be viewed and exported at any time. Step 1 Enter the Log Search interface. Menu >…
• Page 251
  Network Video Recorder User Manual Figure 16-3 Log Search Results Up to 2000 log files can be displayed each time. Step 5 You can click the button of each log or double click it to view its detailed information, as shown in Figure 16-4.
• Page 252
  Network Video Recorder User Manual Figure 16-5 Export Log Files Step 7 Select the backup device from the dropdown list of Device Name. Step 8 Select the format of the log files to be exported. Up to 15 formats are selectable. Step 9 Click the Export to export the log files to the selected backup device.
• Page 253
  Network Video Recorder User Manual 16.4 Importing/Exporting Configuration Files Purpose: The configuration files of the NVR can be exported to local device for backup; and the configuration files of one NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.
• Page 254
  Network Video Recorder User Manual 16.5 Upgrading System Purpose: The firmware on your NVR can be upgraded by local backup device or remote FTP server. 16.5.1 Upgrading by Local Backup Device Step 1 Connect your NVR with a local backup device where the update firmware file is located. Step 2 Enter the Upgrade interface.
• Page 255
  Network Video Recorder User Manual Step 2 Click the FTP tab to enter the local upgrade interface, as shown in Figure 16-8. Figure 16-8 FTP Upgrade Interface Step 3 Enter the FTP Server Address in the text field. Step 4 Click the Upgrade button to start upgrading. Step 5 After the upgrading is complete, reboot the NVR to activate the new firmware.
• Page 256
  Network Video Recorder User Manual 16.6 Restoring Default Settings Step 1 Enter the Default interface. Menu > Maintenance > Default Figure 16-9 Restore Defaults Step 2 Select the restoring type from the following three options. Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.
• Page 257
  Network Video Recorder User Manual Chapter 17 Others 17.1 Configuring RS-232 Serial Port The RS-232 serial port is not supported by DS-7600NI series NVR. Purpose: The RS-232 port can be used in two ways:  Parameters Configuration: Connect a PC to the NVR through the PC serial port. Device parameters can be configured by using software such as HyperTerminal.
• Page 258
  Network Video Recorder User Manual 17.2 Configuring General Settings Purpose: You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu > Configuration > General interface. Step 1 Enter the General Settings interface. Menu >Configuration> General Step 2 Select the General tab.
• Page 259
  Network Video Recorder User Manual Output Standard: Select the output standard to NTSC or PAL, which must be the same with the video input standard. Resolution: For the DS-9600NI and DS-8600NI series NVR, you can configure the VGA/HDMI resolution and VGA2/HDMI 2 resolution. And up to 4K (3840 × 2160) resolution is selectable for the VGA/HDMI output.
• Page 260
  Network Video Recorder User Manual 17.3 Configuring DST Settings Step 1 Enter the General Settings interface. Menu >Configuration>General Step 2 Choose DST Settings tab. Figure 17-4 DST Settings Interface You can check the checkbox before the Auto DST Adjustment item. Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.
• Page 261
  Network Video Recorder User Manual 17.4 Configuring More Settings Step 1 Enter the General Settings interface. Menu >Configuration>General Step 2 Click the More Settings tab to enter the More Settings interface. Figure 17-5 More Settings Interface Step 3 Configure the following settings: Device Name: Edit the name of NVR.
• Page 262
  Network Video Recorder User Manual 17.5 Managing User Accounts Purpose: There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is set when you start the device for the first time. The Administrator has the permission to add and delete user and configure user parameters.
• Page 263
  Network Video Recorder User Manual Step 3 Enter the information for new user, including User Name, Admin Password, Password, Confirm, Level and User’s MAC Address. Password: Set the password for the user account. Strong Password recommended–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
• Page 264
  Network Video Recorder User Manual Figure 17-9 User Permission Settings Interface Step 6 Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for the user.  Local Configuration Local Log Search: Searching and viewing logs and system information of NVR. Local Parameters Settings: Configuring parameters, restoring factory default parameters and importing/exporting configuration files.
• Page 265
  Network Video Recorder User Manual Local Manual Operation: Locally starting/stopping manual recording and alarm output of the selected camera (s). Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the selected camera (s). Local Playback: Locally playing back recorded files of the selected camera (s). Remote Playback: Remotely playing back recorded files of the selected camera (s).
• Page 266
  Network Video Recorder User Manual Step 3 Click the icon to enter the Edit User interface, as shown in Figure 17-12. Figure 17-11 Edit User (Operator/Guest) Figure 17-12 Edit User (admin) Step 4 Edit the password for the user • Operator and Guest You can edit the user information, including user name, password, permission level and MAC address.
• Page 267
  Network Video Recorder User Manual Strong Password recommended–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
• Page 268
  Network Video Recorder User Manual Chapter 18 Appendix 18.1 Specifications 18.1.1 DS-9600NI-I8 Model DS-9608NI-I8 DS-9616NI-I8 DS-9632NI-I8 DS-9664NI-I8 8-ch 16-ch 32-ch 64-ch IP video input Video/Audio Up to 12 MP resolution input Two-way audio 1-ch, RCA (2.0 Vp-p, 1 k Ω) 256 Mbps, 320 Mbps 320 Mbps…
• Page 269
  Network Video Recorder User Manual Synchronous 8-ch 16-ch playback 2-ch @ 12 MP (20fps) / 4-ch @ 8 MP (25fps) / 8-ch @ 4MP Capability (30fps) / 16-ch @ 1080p (30fps) Network Network TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, management protocols iSCSI, UPnP™, HTTPS…
• Page 270
  Network Video Recorder User Manual 18.1.2 DS-9600NI-I16 Model DS-9616NI-I16 DS-9632NI-I16 DS-9664NI-I16 IP video input 16-ch 32-ch 64-ch 256 Mbps 320 Mbps 320 Mbps Incoming Video/Aud bandwidth Or 200 Mbps (when RAID is enabled) io input Outgoing 256 Mbps, or 200 Mbps (when RAID is enabled) bandwidth VGA1: 2K (2560 ×…
• Page 271
  Network Video Recorder User Manual interface Serial interface RS-232; RS-485; Keyboard USB interface Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 Alarm in/out 16/8 Power supply 100 to 240 VAC, 50 to 60 Hz Max. Power 300 W Consumption ≤…
• Page 272
  Network Video Recorder User Manual 18.1.3 DS-8600NI-I8 Model DS-8608NI-I8 DS-8616NI-I8 DS-8632NI-I8 DS-8664NI-I8 8-ch 16-ch 32-ch 64-ch IP video input Video/Au Up to 12 MP resolution dio input Two-way audio 1-ch, RCA (2.0 Vp-p, 1 k Ω) 256 Mbps 320 Mbps 320 Mbps Incoming 128 Mbps…
• Page 273
  Network Video Recorder User Manual SATA 8 SATA interfaces Hard disk eSATA 1 eSATA interface Capacity Up to 6TB capacity for each disk Network 2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface interface External Serial interface RS-232; RS-485; Keyboard interface USB interface Front panel: 2 ×…
• Page 274
  Network Video Recorder User Manual 18.1.4 DS-7600NI-I2 Model DS-7608NI-I2 DS-7616NI-I2 DS-7632NI-I2 8-ch 16-ch 32-ch IP video input Video/Audio Up to 12 MP resolution input Two-way audio 1-ch, RCA (2.0 Vp-p, 1 k Ω) Incoming 80 Mbps 160 Mbps 256Mbps bandwidth Outgoing Network 256 Mbps…
• Page 275
  Network Video Recorder User Manual USB interface Front panel: 1 × USB 2.0; Rear panel: 1 × USB 3.0 Alarm in/out Power supply 12 VDC Power ≤40 W Consumption ≤15 W (without hard disk) Working -10 to +55º C (+14 to +131º F) temperature General Working humidity 10 to 90 %…
• Page 276
  Network Video Recorder User Manual 18.1.5 DS-7600NI-I2/P DS-7608NI-I2/ DS-7616NI-I2/ DS-7632NI-I2/ Model 8-ch 16-ch 32-ch IP video input Video/ Up to 12 MP resolution Audio Two-way input 1-ch, RCA (2.0 Vp-p, 1 k Ω) audio Incoming 80 Mbps 160 Mbps 256Mbps bandwidth Outgoing Network…
• Page 277
  Network Video Recorder User Manual Capacity Up to 6TB capacity for each disk Network 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface interface External interface USB interface Front panel: 1 × USB 2.0; Rear panel: 1 × USB 3.0 Alarm in/out 8, RJ-45 10/100 Mbps 16, RJ-45 10/100 Mbps self-adaptive…
• Page 278
  Network Video Recorder User Manual 18.1.6 DS-7700NI-I4 Model DS-7708NI-I4 DS-7716NI-I4 DS-7732NI-I4 8-ch 16-ch 32-ch IP video input Video/Audio Up to 12 MP resolution input Two-way 1-ch, RCA (2.0 Vp-p, 1 k Ω) audio Incoming 80 Mbps 160 Mbps 256 Mbps bandwidth Outgoing Network…
• Page 279
  Network Video Recorder User Manual Network 2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface interface Serial External 1 RS-485 (half-duplex), 1 RS-232 interface interface USB interface Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 Alarm in/out 16/4 Power supply 100 to 240 VAC Power…
• Page 280
  Network Video Recorder User Manual 18.1.7 DS-7700NI-I4/P Model DS-7708NI-I4/8P DS-7716NI-I4/16P DS-7732NI-I4/16P 8-ch 16-ch 32-ch IP video input Video/Audio Up to 12 MP resolution input Two-way audio 1-ch, RCA (2.0 Vp-p, 1 k Ω) Incoming 80 Mbps 160 Mbps 256 Mbps bandwidth Outgoing Network…
• Page 281
  Network Video Recorder User Manual interface interface Serial interface RS-485 (half-duplex), RS-232 USB interface Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 Alarm in/out 16/4 8, RJ-45 10/100 Mbps 16, RJ-45 10/100 Mbps self-adaptive Interface self-adaptive Ethernet interface Ethernet interface Interface…
• Page 282
  Network Video Recorder User Manual HDMI1: 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, VGA1/HDMI1 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, output 1280 × 720/60Hz, 1024 × 768/60Hz resolution HDMI2: 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 ×…
• Page 283
  Network Video Recorder User Manual Consumption ≤ 30 W (without hard disk) Working -10 to +55° C (14 to 131° F) temperature Working 10 to 90 % humidity Chassis 19-inch rack-mounted 2U chassis Dimensions 445 × 470 × 90 mm (17.5″ × 18.5″ × 3.5″) (W ×…
• Page 284
  Network Video Recorder User Manual 18.1.9 DS-7700NI-K4 Model DS-7708NI-K4 DS-7716NI-K4 DS-7732NI-K4 video 8-ch 16-ch 32-ch input Video/ Incoming 80 Mbps 160 Mbps 256 Mbps Audio bandwidth input Outgoing 160 Mbps bandwidth HDMI 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × output 1080/60Hz, 1600 ×…
• Page 285
  Network Video Recorder User Manual interface Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 interface Alarm in/out 16/4 Power 100 to 240 VAC supply Power ≤ 80 W Consumptio ≤ 20 W (without hard disk) Working -10 to +55ºC (14 to 131ºF) temperature General…
• Page 286
  Network Video Recorder User Manual 18.1.10 DS-7700NI-K4/P DS-7708NI-K4 DS-7716NI-K DS-7732NI-K4/1 Model 4/16P IP video input 8-ch 16-ch 32-ch Video/ Incoming 80 Mbps 160 Mbps 256 Mbps bandwidth Audio input Outgoing 160 Mbps bandwidth 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × HDMI output 1080/60Hz, 1600 ×…
• Page 287
  Network Video Recorder User Manual Alarm in/out 16/4 8, RJ-45 10/100 Mbps 16, RJ-45 10/100 Mbps self-adaptive Interface self-adaptive Ethernet interface Ethernet interface Interface Power ≤ 200 W Supported IEEE 802.3 af/at standard Power supply 100 to 240 VAC Power ≤…
• Page 288
  Network Video Recorder User Manual 18.1.11 DS-7600NI-K2 Model DS-7608NI-K2 DS-7616NI-K2 DS-7632NI-K2 IP video input 8-ch 16-ch 32-ch Video/ Incoming 80 Mbps 160 Mbps 256 Mbps bandwidth Audio input Outgoing 160 Mbps bandwidth 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 HDMI output ×…
• Page 289
  Network Video Recorder User Manual Power supply 12 VDC Power ≤ 40 W Consumption ≤15 W (without hard disk) Working -10 to +55ºC (14 to 131ºF ) temperature General Working 10 to 90 % humidity Chassis 385 mm chassis Dimensions 385 ×…
• Page 290
  Network Video Recorder User Manual 18.1.12 DS-7600NI-K2/P DS-7608NI-K2 DS-7616NI-K DS-7632NI-K2/ Model 2/16P IP video input 8-ch 16-ch 32-ch Video/ Incoming 80 Mbps 160 Mbps 256 Mbps bandwidth Audio input Outgoing 160 Mbps bandwidth 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 HDMI output ×…
• Page 291
  Network Video Recorder User Manual 8, RJ-45 10/100 Mbps RJ-45 10/100 Mbps Interface self-adaptive self-adaptive Ethernet interface Ethernet interface Interface Power ≤ 120 W ≤ 200 W Supported IEEE 802.3 af/at standard Power supply 100 to 240 VAC Power ≤ 180 W ≤…
• Page 292
  Network Video Recorder User Manual 18.1.13 DS-7600NI-K1 Model DS-7604NI-K1 DS-7608NI-K1 DS-7616NI-K1 IP video input 4-ch 8-ch 16-ch Video/ Incoming 40 Mbps 60 Mbps 80 Mbps bandwidth Audio input Outgoing 80 Mbps bandwidth HDMI: 4K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 ×…
• Page 293
  Network Video Recorder User Manual Power supply 12 VDC Consumption ≤ 10 W (without hard disk) Working -10 to +55° C (14 to 131° F) temperature Working 10 to 90 % General humidity Chassis 260 mm chassis Dimensions 260 × 225 × 48 mm (10.2″ × 8.9″ × 1.9″) (W ×…
• Page 294
  Network Video Recorder User Manual 18.1.14 DS-7604NI-K1/4P Model DS-7604NI-K1/4P IP video input 4-ch Video/ Incoming 40 Mbps bandwidth Audio input Outgoing 80 Mbps bandwidth HDMI: 4K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, HDMI/VGA Video/ 1024 ×…
• Page 295
  Network Video Recorder User Manual Interface Power ≤ 40 W Supported IEEE 802.3 af/at standard Power supply 48 VDC Power ≤ 65 W Consumption ≤ 10 W (not enabling PoE) (without hard disk) Working -10 to +55° C (14 to 131° F) temperature General Working…
• Page 296
  Network Video Recorder User Manual 18.2 Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the NVR, with the main stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF.
• Page 297
  Step 7 Check if the fault is solved by the step 1 to step 3. Step 8 If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  There is an audible warning sound “Di-Di-Di-DiDi” after a new bought NVR starts up.
• Page 298
  Step 12 Check if the fault is solved by the step 1 to step 3. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  The status of the added IP camera displays as “Disconnected” when it is connected through Private Protocol.
• Page 299
  Network Video Recorder User Manual If not, please contact the engineer from Hikvision to do the further process.  The IP camera frequently goes online and offline and the status of it displays as “Disconnected”. Possible Reasons: − The IP camera and the NVR versions are not compatible.
• Page 300
  Step 3 Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  Live view stuck when video output locally.
• Page 301
  Step 3 Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  Live view stuck when video output remotely via the Internet Explorer or platform software.
• Page 302
  If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  When using the NVR to get the live view audio, there is no sound or there is too much noise, or the volume is too low.
• Page 303
  Step 4 Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from Hikvision to do the further process.  The image gets stuck when NVR is playing back by single or multi-channel.
• Page 304
  Network Video Recorder User Manual If not, please contact the engineer from Hikvision to do the further process.  No record file found in the NVR local HDD, and prompt “No record file found”. Possible Reasons: − The time setting of system is incorrect.
• Page 305
  Network Video Recorder User Manual 18.4 Summary of Changes Version 3.4.92 Added:  Easy network access by Hik-Connect. (Chapter 2.2 Using the Wizard for Basic Configuration, Chapter 12.2.1 Configuring Hik-Connect) Deleted:  Delete two DDNS types: IP sever and HiDDNS. (Chapter 2.2 Using the Wizard for Basic Configuration, Chapter 12.2.2 Configuring DDNS) Version 3.4.91 Added:…
• Page 306
  Network Video Recorder User Manual  DS-7600/7700/8600/9600-I (/P) series NVR is accessible by the thermal network camera, and supports the advanced search for fire/ship/temperature/temperature difference detection triggered alarm and the recorded video files and pictures (Chapter 11.6 Advanced Search)  DS-7600/7700/8600/9600-I (/P) series NVR supports the playback by main stream or sub stream. (Chapter 6 Playback) …
• Page 307
  Network Video Recorder User Manual  Add the configuration and use of unlock pattern for fast login. (Chapter 2.3 Using the Unlock Pattern for Login)  Add the fisheye expansion view for the connected fisheye camera in the live view and playback. (Chapter 3.2.5 Fisheye Expansion View) …
• Page 308
  Network Video Recorder User Manual Pictures, Chapter 7 Backup, Chapter 11 Network Settings, Chapter 12 RAID, Chapter 17 Specifications) Version 3.3.4 Added:  Add the new models of DS-7600NI-I2 (/P) and DS-7700NI-I4 (/P).  Add the support of Cloud P2P (Step 4 in Chapter 2.3 Using the Wizard for Basic Configuration, Chapter 11.2.2 Configuring EZVIZ Cloud P2P)
• Page 309
  Network Video Recorder User Manual 18.5 List of Compatible IP Cameras 18.5.1 List of Hikvision IP Cameras For the list, our company holds right to interpret.
• Page 310
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-2CD7133F-E V5.2.0 build 140721 640*480 √ × DS-2CD793NFWD-EI V5.2.0 build 140721 704*576 √ √ V2.0 build 090522 Network DS-2CD802NF V2.0 build 090715 704*576 √ √ Camera V2.0 build 110301 DS-2CD833F-E V5.2.0 build 140721 640*480…
• Page 311
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-2CD4232FWD-IS(2.8-12m V5.3.0 build150327 2048*1536 √ √ DS-2CD4312F-I V5.3.0 build150327 1280*1024 √ × DS-2CD4312FWD-I V5.3.0 build150327 1280*960 √ × DS-2CD4324F-I V5.3.0 build150327 1920*1080 √ × DS-2CD4332FHWD-IS V5.3.0 build150327 2048*1536 √…
• Page 312
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-2CD966(B) V3.1 build 120423 1360*1024 × × DS-2CD966-V(B) V3.1 build 120423 1360*1024 × × DS-2CD976(C) V3.1 build 120423 1600*1200 × × DS-2CD976-V(C) V3.1 build 120423 1600*1200 × ×…
• Page 313
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream iDS-2CD9361 V4.0.0 build150213 2752*2208 √ × iDS-2CD9022 V4.0.0 build150213 1920*1080 √ √ iDS-2CD9025 V3.8.2 build141114 1920*1080 √ × iDS-2CD9022-SZ V4.0.0 build150213 1920*1080 √ × DS-2CD9125-KS V3.8.1 build150113 1920*1080 √…
• Page 314
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-6604HFI(-SATA) V1.2.1 build131202 704*576 √ √ DS-6701HWI V1.2.3 build141202 960*576 √ √ DS-6701HWI-SATA V1.2.3 build141202 960*576 √ √ DS-6704HWI V1.2.3 build141202 960*576 √ √ DS-6704HWI-SATA V1.2.3 build141202 960*576 √…
• Page 315
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-2DF5276-AH/DH/A3H/D3 V5.2.8 build150124 1280*960 √ √ H/AFH/A3FH iDS-2DF5276-AH/DH/A3H/D V5.2.8 build150124 1280*960 √ √ 3H/AFH/A3FH DS_2DF7130I5-AW V5.2.8 build150124 1280*960 √ √ DS-2DF7285-AH V5.2.8 build150124 1920*1080 √ √ DS-2DF5285-AH V5.2.8 build150124 1920*1080 √…
• Page 316
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream iDS-2DF5286-A/D/A3/D3/AF V5.2.8 build150124 1920*1080 √ √ /A3F DS_2DF7230I5-AW V5.2.8 build150124 1920*1080 √ √ DS-2AF7220-A/D V5.2.8 build150124 1920*1080 √ √ DS-2AF7230-A/D V5.2.8 build150124 1920*1080 √ √ DS-2AF5220-A/D V5.2.8 build150124 1920*1080 √…
• Page 317
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-2DE5186-A/AE V5.2.10 build150128 1920*1080 √ √ DS-2DE7182-A V5.2.10 build150128 1920*1080 √ √ DS-2DE4582-A V5.2.10 build150128 1920*1080 √ √ DS-2DE4220-A V5.2.10 build150128 1920*1080 √ √ DS-2DE4182-A V5.2.10 build150128 1920*1080 √…
• Page 318
  Network Video Recorder User Manual Max. Sub- Type Model Version Audio Resolution stream DS-2DY9187-A V5.2.8 build150124 1920*1080 √ √ DS-2DF8223IV-A V5.3.0 build150304 1920*1080 √ √ DS-2DF8623IV-A V5.3.0 build150304 3072*1728 √ √ DS-2DF6623V-A V5.3.0 build150304 3072*1728 √ √ DS-2DF8823IV-A V5.3.0 build150304 4096*2160 √…
• Page 319
  Network Video Recorder User Manual 18.5.2 List of Third-party IP Cameras ONVIF compatibility refers to the camera can be supported both when it uses the ONVIF protocol and its private protocols. Only ONVIF is supported refers to the camera can only be supported when it uses the ONVIF protocol.
• Page 320
  Network Video Recorder User Manual IP Camera Sub- Max. Manufacturer Model Version Audio Resolution stream or Protocol ACM3401-09L-X-002 A1D-220-V3.13.16-AC 1208*1024 × × TCM4301-10D-X-00 A1D-310-V4.12.09-AC ACTi 1208*1024 × √ TCM5311-11D-X-00 A1D-310-V4.12.09-AC 1208*960 × √ AV1305 M 65175 1208*1024 √ × AV2815 65220 1920*1080 √…
• Page 321
  Network Video Recorder User Manual NBC 265 P 07500452 1280*720 × √ (×) (ONVIF compatibility) CB-500Ap(Brickcom- 50xA) Brickcom v3.2.1.3 1920*1080 × √ (×) (ONVIF compatibility) 1920*1080 VB-H410(ONVIF Ver.+1.0.0 × √ compatibility) (1280*960) VB-S9000F Ver. 1.0.0 1920*1080 × × VB-S300D Ver. 1.0.0 1920*1080 ×…
• Page 322
  Network Video Recorder User Manual SNC-RH124 1.79.00 1280*720 √ √ (ONVIF compatibility) SND-5080 SUMSUNG 3.10_130416 1280*1024 √ √ (ONVIF compatibility) IP7133 0203a 640*480 × × FD8134 0107a 1280*800 × × (ONVIF compatibility) IP8161 0104a 1600*1200 × √ (×) (ONVIF Vivotek compatibility) IP8331 0102a…
• Page 323
  Network Video Recorder User Manual 18.5.3 List of IP Cameras Connected to PoE by Long Network Cable (100 — 300 m) Index Model DS-2CD4665F-IZHS DS-2CD4026FWD-AP DS-2CD4A35FWD-IZHS DS-2CD2642FWD-IZS DS-2CD2F42FWD-IWS DS-2CD2942F-IWS DS-2CD2510F DS-2CD2342WD-I DS-2CD2322WD-I DS-2CD2352-I DS-2CD2642FWD-IZS DS-2CD2642FWD-I DS-2CD2642FWD-IS DS-2CD2642FWD-IZ DS-2CD2742FWD-IZS DS-2CD2742FWD-I DS-2CD2742FWD-IS DS-2CD2742FWD-IZ DS-2CD2T42WD-I8 DS-2CD2T42WD-I5…
• Page 324
  Network Video Recorder User Manual…

Какой вес Hikvision DS-7608NI-K2/8P?

Какая высота Hikvision DS-7608NI-K2/8P?

Какая ширина Hikvision DS-7608NI-K2/8P?

Какая толщина Hikvision DS-7608NI-K2/8P?

Инструкция Hikvision DS-7608NI-K2/8P доступно в русский?