Инструкция по эксплуатации кадиллак эскалейд 2019

Как перевести мили в километры?

Где я могу узнать идентификационный номер транспортного средства Cadillac?

Что такое идентификационный номер транспортного средства (VIN)?

Когда транспортному средству Cadillac требуется техническое обслуживание?

Когда следует заменять тормозную жидкость на Cadillac?

В чем разница между топливом E10 и E5?

Одна или несколько дверей не открываются изнутри. Что мне делать?

Автомобильный радиоприемник не включается, что делать?

Инструкция Cadillac Escalade ESV (2019) доступно в русский?

Задать вопрос о Cadillac Escalade (2019)

Escalade

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 2

In Brief . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 5

Keys, Doors, and Windows . . . . . . . . . 27

Seats and Restraints . . . . . . . . . . . . . . . 60

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Instruments and Controls . . . . . . . . 123

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

Infotainment System . . . . . . . . . . . . . 176

Climate Controls . . . . . . . . . . . . . . . . . . 177

Driving and Operating . . . . . . . . . . . . 186

Vehicle Care . . . . . . . . . . . . . . . . . . . . . . . 277

Service and Maintenance . . . . . . . . . 362

Technical Data . . . . . . . .. . . . . . . . . . . . 375

Customer Information . . . . . . . . . . . . 378

Reporting Safety Defects . . . . . . . . . 388

OnStar ….. . . . . . . . . . . . . . . . . . . . . . . . . . 392

Connected Services . . . . . . . . . . . . . . . 400

Index . . . . . . . . . . . . . . . . . . . . . . . . 404

2 INTRODUCTION

Introduction

The names, logos, emblems, slogans,
vehicle model names, and vehicle
body designs appearing in this manual
including, but not limited to, GM, the
GM logo, CADILLAC, the CADILLAC
Emblem, and ESCALADE are
trademarks and/or service marks of
General Motors LLC, its subsidiaries,
affiliates, or licensors.

For vehicles first sold in Canada,
substitute the name “General Motors
of Canada Company” for Cadillac
Motor Division wherever it appears in
this manual.

This manual describes features that
may or may not be on the vehicle
because of optional equipment that
was not purchased on the vehicle,
model variants, country specifications,
features/applications that may not be
available in your region, or changes
subsequent to the printing of this
owner’s manual.

Refer to the purchase documentation
relating to your specific vehicle to
confirm the features.

Keep this manual in the vehicle for
quick reference.

Canadian Vehicle Owners

A French language manual can be
obtained from your dealer, at
www.helminc.com, or from:

Propriétaires Canadiens

On peut obtenir un exemplaire de ce
guide en français auprès du
concessionnaire ou à l’adresse
suivante:

Helm, Incorporated
Attention: Customer Service
47911 Halyard Drive
Plymouth, MI 48170
USA

Litho in U.S.A.
Part No. 84161699 A First Printing

©

2018 General Motors LLC. All Rights Reserved.

INTRODUCTION 3

Using this Manual

To quickly locate information about
the vehicle, use the Index in the back
of the manual. It is an alphabetical
list of what is in the manual and the
page number where it can be found.

Danger, Warning, and
Caution

Warning messages found on vehicle
labels and in this manual describe
hazards and what to do to avoid or
reduce them.

Danger

{

Danger indicates a hazard with a
high level of risk which will result
in serious injury or death.

Warning

{

Warning indicates a hazard that
could result in injury or death.

Caution

Caution indicates a hazard that
could result in property or vehicle
damage.

A circle with a slash through it is a
safety symbol which means “Do Not,”
“Do not do this,” or “Do not let this
happen.”

Symbols

The vehicle has components and
labels that use symbols instead of
text. Symbols are shown along with
the text describing the operation or
information relating to a specific
component, control, message, gauge,
or indicator.

M : Shown when the owner’s manual

has additional instructions or
information.

* : Shown when the service manual

has additional instructions or
information.

0 : Shown when there is more

information on another page —
“see page.”

4 INTRODUCTION

Vehicle Symbol Chart

Here are some additional symbols that
may be found on the vehicle and what
they mean. See the features in this
manual for information.

u : Air Conditioning System
G : Air Conditioning Refrigerant Oil
9 : Airbag Readiness Light

! : Antilock Brake System (ABS)
$ : Brake System Warning Light

9 : Dispose of Used Components

Properly

B : Engine Coolant Temperature
_ : Flame/Fire Prohibited
H : Flammable
[ : For ward Collision Alert

: : Oil Pressure
X : Park Assist
~ : Pedestrian Ahead Indicator
O : Power
7 : Rear Cross Traffic Alert
I : Registered Technician

/ : Remote Vehicle Start
> : Seat Belt Reminders
I : Side Blind Zone Alert
h : Start/S top
7 : Tire Pressure Monitor
d : StabiliTrak/Electronic Stability

Control (ESC)

a : Under Pressure
V : Vehicle Ahead Indicator

+ : Fuses
j : ISOFIX/LATCH System Child

Restraints

| : Lane Change Alert
@ : Lane Departure Warning
A : Lane Keep Assist
* : Malfunction Indicator Lamp

In Brief

Instrument Panel

Instrument Panel . . . . . . . . . . . . . . . . . . . 6

Initial Drive Information

Initial Drive Information . . . . . . . . . . . 8
Remote Keyless Entry (RKE)

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote Vehicle Start . . . . . . . . . . . . . . . 8
Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Liftgate . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 9
Windows . . . . . . . . . . .. . . . . . . . . . . . . . .. 10
Seat Adjustment . . . . . . . . . . . . . . . . . . . 10
Memory Features . . . . . . . .. . . . . . . . . . 12
Second Row Seats . . . . . . . . . . . . . . . . . 12
Third Row Seats . . . . . . . . . . . . . . . . . . . 12
Heated and Cooled Front Seats . . . 12
Head Restraint Adjustment . . . . . . . 13
Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Passenger Sensing System . . . . . . . . 13
Mirror Adjustment . . . . . . . . . . . . . . . . 14
Steering Wheel Adjustment . . . . . . . 15
Throttle and Brake Pedal

Adjustment . . . . . . . . . . . . . . . . . . . . . . . 15
Interior Lighting . . . . . . . . . . . . . . . . . . . 15
Exterior Lighting . . . . . . . . . . . . . . . . . . . 16
Windshield Wiper/Washer . … . . . . 17

Climate Controls . . . . . . . . . . . . . . . .. . . 17

Transmission . . . . . . . . . . . . . . . . ……. 18
Four-Wheel Drive . . . . . . . . . . . . . .. . . . 18

Vehicle Features

Infotainment System . . . . . . . . . . . . . . 19
Steering Wheel Controls . . . . . . . . . . 19
Cruise Control . . . . . . . . . . . . . . . . . . . . . 20
Driver Information

Center (DIC) . . . . . . . . . . . … . . . . . . . . 20

Forward Collision Alert (FCA)

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Forward Automatic

Braking (FAB) . . . . . . . . . . . . . . . . . . . . 21
Lane Keep Assist (LKA) . . . . . . . . . . . 21
Lane Change Alert (LCA) . . . . . . . . . . 21
Surround Vision . . . . . . . . . . . . . . . . . . . 21
Rear Vision Camera (RVC) . . . . . . . . 21
Rear Cross Traffic Alert (RCTA)

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Park Assist . . . . . . . . . .. . . . . . . . . . . . . . . 22
Automatic Parking

Assist (APA) . . . . . . . . . . . .. . . . . . . . . . 22
Reverse Automatic

Braking (RAB) . . . . . . . . . . . . . . . . . . . . 22
Power Outlets . . . . . . . . . . . . .. . . . . . . . . 22
Universal Remote System . . . . . . . . . 23
Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

IN BRIEF 5

Performance and Maintenance

Traction Control/Electronic

Stability Control . . . . . . . . . . . . . . . . . . 24
Tire Pressure Monitor …. . . . . . . . . . 24
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
E85 or FlexFuel . . . . . . . . . . . . . . . . . . .. 25
Engine Oil Life System . . . . . . . . . . . . 25
Driving for Better Fuel

Economy . . . . . . . . . . . . . . . . ………. 26

Roadside Service . . . . . . . . . . . . . …… 26

6 IN BRIEF

Instrument Panel

1. Air Vents 0 183.

2. Head-Up Display (HUD) 0 151 (If

Equipped).

3. Turn Signal Lever. See Turn and

Lane-Change Signals 0 171.

Windshield Wiper/Washer 0 124.

Rear Window Wiper/Washer

0 126.

4. Hazard Warning Flashers 0 171.

5. Instrument Cluster 0 134.

6. Shift Lever. See Automatic
Transmission 0 210.

Tow/Haul Mode Selector Button.
See Tow/Haul Mode 0 214.

Range Selection Mode Buttons (If
Equipped). See Manual Mode
0 213.

7. Magnetic Ride Control Button.
See Magnetic Ride Control 0 225.

Pedal Adjust Switch (If
Equipped). See Adjustable Throttle

and Brake Pedal 0 202.

Traction Control/Electronic
Stability Control 0 222.

8. Light Sensor. See Automatic
Headlamp System 0 170.

9. Infotainment 0 176.

10. Glove Box Button. See Glove Box

0 119.

Lane Keep Assist (LKA) 0 251 (If

Equipped).

Park Assist Button. See

Assistance Systems for Parking or
Backing 0 238.

11. Dual Automatic Climate Control
System 0 177.

Instrument Panel Storage 0 119.

12. CD Player. See the infotainment
manual.

13. ENGINE START/STOP Button.
See Ignition Positions 0 203.

14. Steering Wheel Controls 0 124.

Driver Information Center (DIC)
Controls. See Driver Information
Center (DIC) 0 149.

15. Horn 0 124.

16. Steering Wheel Adjustment 0 124.

17. Hood Release. See Hood 0 280.

IN BRIEF 7

18. Cruise Control 0 226 (If

Equipped).

Adaptive Cruise Control 0 229 (If
Equipped).

Forward Collision Alert (FCA)
System 0 244 (If Equipped).

Heated Steering Wheel 0 124 (If

Equipped).

Phone Button. See the
infotainment manual.

19. Automatic Transfer Case Knob (If

Equipped). See Four-Wheel Drive
0 215.

20. Data Link Connector (DLC) (Out

of View). See Malfunction

Indicator Lamp (Check Engine
Light) 0 140.

21. Electric Parking Brake 0 220 (If

Equipped).

22. Exterior Lamp Controls 0 167.

23. Instrument Panel Illumination
Control 0 172.

8 IN BRIEF

Initial Drive Information

This section provides a brief overview
about some of the important features
that may or may not be on your
specific vehicle.

For more detailed information, refer to
each of the features which can be
found later in this owner’s manual.

Remote Keyless Entry
(RKE) System

The Remote Keyless Entry (RKE)
transmitter is used to remotely lock
and unlock the doors from up to 60 m
(197 ft) away from the vehicle.

K : Press to unlock the driver door.

Press

K again within three seconds to

unlock all remaining doors.

Q : Press to lock all doors.

Lock and unlock feedback can be
personalized. See Vehicle
Personalization 0 155.

b : Press twice to open or close the

liftgate. Press once to stop the liftgate
from moving.

c : Press twice to open the liftglass.
7 : Press and release to initiate

vehicle locate. The turn signal lamps
flash and the horn sound three times.

Press

7 and hold for more than

three seconds to sound the panic
alarm.

7 again to cancel the panic

Press
alarm.

See Keys 0 27 and Remote Keyless
Entry (RKE) System 0 28.

Remote Vehicle Start

The engine can be started from
outside of the vehicle.

Starting the Vehicle

1. Press and release Q on the RKE

transmitter.

2. Immediately press and hold
for at least four seconds or until
the turn signal lamps flash.

Start the vehicle normally after
entering.

When the vehicle starts, the parking
lamps will turn on.

Remote start can be extended.

/

Canceling a Remote Start

To cancel a remote start, do one of
the following:

.

Press and hold
parking lamps turn off.

.

Turn on the hazard warning
flashers.

.

Turn the vehicle on and then off.

See Remote Vehicle Start 0 35.

/ until the

To lock or unlock the doors from
outside the vehicle press

the RKE transmitter or use the key in
the front doors. The key cylinder is
covered by a cap. See Door Locks 0 36.
See Remote Keyless Entry (RKE) System
Operation 0 28.

Q or K on

Power Door Locks

IN BRIEF 9

Keyless Access

The RKE transmitter must be within
1 m (3 ft) of the liftgate or door being
opened. Pressing the button on the
driver door handle will unlock the
driver door. If the handle button is
pressed again within five seconds, the
passenger doors and liftgate will
unlock. See “Keyless Access Operation”
in Remote Keyless Entry (RKE) System
Operation 0 28.

Door Locks

To lock or unlock the doors from
inside the vehicle:

.

Press

Q or K on a power door

lock switch.

.

Push down the manual lock knob
on the driver door to lock all
doors. Push down the lock knob
on a passenger door to lock that
door only.

.

Pull the door handle once to
unlock that door. Pull the handle
again to unlatch it.

Q : Press to lock the doors.
K : Press to unlock the doors.

See Door Locks 0 36.

Liftgate

10 IN BRIEF

To open the liftgate, press K on the
power door lock switch or press

the Remote Keyless Entry (RKE)
transmitter twice to unlock all doors.
Press the touch pad (1) on the
underside of the liftgate handle and
lift up. See Remote Keyless Entry (RKE)
System Operation 0 28.

Use the pull cup to lower and close
the liftgate. Do not press the touch
pad while closing the liftgate. This will
cause the liftgate to be unlatched.

To open the liftglass, press the
button (2) above the license plate.
Close the liftglass before opening the
liftgate to avoid damaging it.

K on

Power Liftgate Operation

If equipped with a power liftgate, the
switch is on the overhead console. The
vehicle must be in P (Park).

Choose the power liftgate mode by
selecting MAX or 3/4. Press

the overhead console or on the RKE
transmitter press

b twice quickly.

8 on

Press any liftgate button while the
liftgate is moving to stop it. Pressing
again reverses the direction.

To close, press
the liftgate next to the latch.

To disable the power liftgate function,
select OFF on the liftgate switch. See
Liftgate 0 40.

l on the bottom of

Windows

Power windows work when the
ignition is on, in ACC/ACCESSORY,
or when Retained Accessor y Power
(RAP) is active. See Retained Accessory
Power (RAP) 0 207.

Using the window switch, press to
open or pull to close the window.

The windows may be temporarily
disabled if they are used repeatedly
within a short time.

Seat Adjustment

Uplevel Seat Adjustment

If equipped, the ignition must be on
to use all uplevel seat features.

Uplevel Seat Control

1. Feature Select

2. Up

3. Rearward

4. Down

5. Forward

.

Move Feature Select (1) to display
seat adjustments on the
infotainment display. Press and
release or hold to scroll through
features.

.

Press Up (2) to make upward
adjustments of the selected
feature.

.

Press Rearward (3) to make
rearward adjustments of the
selected feature.

.

Press Down (4) to make downward
adjustments of the selected
feature.

.

Press Forward (5) to make forward
adjustments of the selected
feature.

Base Seat Adjustment

To adjust the seat:

.

Move the seat forward or rearward
by sliding the control forward or
rearward.

.

Raise or lower the front part of the
seat cushion by moving the front
of the control up or down.

.

Raise or lower the seat by moving
the rear of the control up or down.

See Power Seat Adjustment 0 62.

IN BRIEF 11

Reclining Seatbacks

To adjust the seatback:

.

Tilt the top of the control
rearward to recline.

.

Tilt the top of the control forward
to raise.

See Reclining Seatbacks 0 65.

12 IN BRIEF

Memory Features

If equipped, memory seats allow two
drivers to save and recall their unique
seat positions for driving the vehicle,
and a shared exit position for getting
out of the vehicle. Other feature
positions may also be saved, such as
power mirrors and power steering
wheel, if equipped. Memory positions
are linked to RKE transmitter 1 or 2
for automatic memory recalls.

Before saving, adjust all available
memory feature positions. Turn the
ignition on and then press and release
SET; a beep will sound. Then
immediately press and hold 1, 2,

or

B (Exit) until two beeps sound.

To manually recall these positions,
press and hold 1, 2, or

saved position is reached.

When Auto Memory Recall is enabled
in vehicle personalization, positions
previously saved to memory buttons
1 and 2 are recalled when the ignition
is changed from off to on or ACC/
ACCESSORY.

When Easy Exit Options is enabled in
vehicle personalization, the feature
automatically recalls the previously
saved exit position when exiting the
vehicle.

Memory adjustments may not be
available upon delivery or after service
until steps in “Saving Memory
Positions” section are performed. See
Memory Seats 0 65.

Second Row Seats

The second row seatbacks can be
folded for additional cargo space,
or the seats can be folded and

B until the

tumbled for easy entry/exit to the
third row seats. The seatbacks also
recline.

See Second Row Seats 0 71.

Third Row Seats

Third row seatbacks can be folded. See
Third Row Seats 0 76.

Heated and Cooled Front
Seats

The buttons are near the climate
controls on the center stack. To
operate, the engine must be running.

IN BRIEF 13

Press I or + to heat the driver or
passenger seatback only.

J or z to heat the driver or

Press
passenger seat cushion and seatback.

Press

C or { to cool the driver or

passenger seat.

See Heated and Cooled Front Seats
0 69.

Head Restraint Adjustment

Do not drive until the head restraints
for all occupants are installed and
adjusted properly.

To achieve a comfortable seating
position, change the seatback recline
angle as little as necessar y while
keeping the seat and the head
restraint height in the proper position.

See Head Restraints 0 61 and Power
Seat Adjustment 0 62.

Seat Belts

Refer to the following sections for
important information on how to use
seat belts properly:

.

Seat Belts 0 78

.

How to Wear Seat Belts Properly
0 79

.

Lap-Shoulder Belt 0 81

.

Lower Anchors and Tethers for
Children (LATCH System) 0 106

Passenger Sensing System

United States

Canada and Mexico

The passenger sensing system will
turn off the front outboard passenger
frontal airbag under certain
conditions. No other airbag is affected
by the passenger sensing system. See

Passenger Sensing System 0 93

The passenger airbag status indicator
will light on the overhead console
when the vehicle is started. See

Passenger Airbag Status Indicator
0 139.

14 IN BRIEF

Mirror Adjustment

Interior Mirror

Adjustment

Adjust the rearview mirror for a clear
view of the area behind the vehicle.

Automatic Dimming Rearview Mirror

The mirror automatically dims to
reduce the glare of headlamps from
behind. The dimming feature comes
on when the vehicle is started.

Rear Camera Mirror

If equipped, this automatic dimming
rearview mirror provides a wide angle
camera view of the area behind the
vehicle. Adjust the mirror with the tab
pushed forward so that the display is
off. See Rear Camera Mirror 0 54.

Exterior Mirrors

Power Mirrors

To adjust the mirrors:

1. Press (1) or (2) to select the
driver or passenger side mirror.

2. Press the arrows on the control
pad to move each mirror in the
desired direction.

3. Press either (1) or (2) again to
deselect the mirror.

See Power Mirrors 0 52.

Power Folding Mirrors

1. Press { to fold the mirrors

inward.

2. Press

Heated Mirrors

Press

See “Rear Window Defogger” under

Dual Automatic Climate Control System
0 177.

{ again to return the

mirrors to the driving position.

K to heat the outside mirrors.

IN BRIEF 15

Steering Wheel Adjustment

Press the top of the switch to move
the pedals closer to your body. Press

To adjust the power tilt and
telescoping steering wheel:

Press the control to move the steering
wheel up and down or forward and
rearward.

Do not adjust the steering wheel while
driving.

the bottom of the switch to move the
pedals away.

See Adjustable Throttle and Brake Pedal
0 202.

The vehicle may have a memory
function, which lets pedal settings be
saved and recalled. See Memory Seats
0 65.

Throttle and Brake Pedal
Adjustment

If equipped, the position of the
throttle and brake pedals can be
changed.

Interior Lighting

Dome Lamps

There are dome lamps in the overhead
console and the headliner, if equipped.

To change the dome lamp settings,
press the following:

OFF : Turns the lamps off, even when
a door is open.

DOOR : The lamps come on
automatically when a door is opened.

ON : Turns all dome lamps on.

16 IN BRIEF

Reading Lamps

Press m or n next to each reading
lamp to turn it on or off.

For more information about interior
lighting, see Instrument Panel

There are reading lamps in the
overhead console and the headliner,
if equipped. To operate, the ignition
must be on or in ACC/ACCESSORY or
using Retained Accessory
Power (RAP).

Illumination Control 0 172.

Exterior Lighting

The exterior lamp control is on the
instrument panel to the left of the
steering wheel.

P : Turns off the automatic

headlamps and Daytime
Running Lamps (DRL). Turning

the headlamp control to
turn the automatic headlamps and
DRL back on.

For vehicles first sold in Canada, the
off position only works when the
vehicle is shifted into the P (Park)
position.

AUTO : Automatically turns the
exterior lamps on and off, depending
on outside lighting.

P again will

; : Turns on the parking lamps

including all lamps, except the
headlamps.

5 : Turns on the headlamps together

with the parking lamps and
instrument panel lights.

See:

.

Exterior Lamp Controls 0 167

.

Daytime Running Lamps (DRL)
0 169

.

Automatic Headlamp System 0 170

IN BRIEF 17

Windshield Wiper/Washer

The windshield wiper control is on the
turn signal lever.

The windshield wipers are controlled
by turning the band with

on it.

z FRONT

1 : Fast wipes.

w : Slow wipes.

3 INT : Use this setting for

intermittent wipes or Rainsense™.
For intermittent wipes, turn

z FRONT band up for more

the
frequent wipes or down for less
frequent wipes.

To turn on Rainsense,
press

z AUTO on the lever, then

turn the
wiper lever to adjust the sensitivity.

.

.

Move the band out of the
position to deactivate Rainsense.

OFF : Turns the windshield wipers off.

z FRONT band on the

Turn the band up to a higher INT
setting for more sensitivity to
moisture.

Turn the band down to the lower
INT setting for less sensitivity to
moisture.

3 INT

8 : For a single wipe, turn the band

down, then release. For several wipes,
hold the band down.

Lm : Push the paddle at the top of

the lever to spray washer fluid on the
windshield.

See Windshield Wiper/Washer 0 124.

Climate Controls

The climate control buttons and the
touch screen are used to adjust the
heating, cooling, and ventilation.

Center Stack Climate Controls

1. Driver and Passenger
Temperature Controls

2. Fan Control

3. OFF (Fan)

4. Driver and Passenger Heated and
Cooled Seats

5. Recirculation

18 IN BRIEF

6. Rear Window Defogger

7. Defrost

8. AUTO (Automatic Operation)

7. Rear (Rear Climate Control
Touch Screen)

8. Air Delivery Mode Control

See Dual Automatic Climate Control

System 0 177 and Rear Climate Control
System 0 182 (If Equipped).

Transmission

Range Selection Mode

when 5 (Fifth) gear is selected,
1 (First) through 5 (Fifth) gears
are available.

2. Press the plus/minus buttons on
the shift lever to select the
desired range of gears for current
driving conditions. See Manual
Mode 0 213.

While using Range Selection Mode,
cruise control and the Tow/Haul Mode
can be used.

Grade Braking is not available when
Range Selection Mode is active. See
Tow/Haul Mode 0 214.

Climate Control Display

1. Outside Temperature Display

2. Driver and Passenger
Temperature Controls

3. Fan Control

4. SYNC (Synchronized
Temperature)

5. A/C Mode (Air Conditioning)

6. Climate Control Selection
(Application Tray Button)

The Range Selection Mode switch,
if equipped, is on the shift lever.

1. To enable the Range Selection
feature, move the shift lever to
the L (Manual Mode) position.
The current range will appear
next to the L. This is the highest
attainable range with all lower
gears accessible. As an example,

Four-Wheel Drive

If equipped with four-wheel drive, the
engine’s driving power can be sent to
all four wheels for extra traction.

Automatic Transfer Case

This transfer case knob is to the left
of the steering column.

The different drive options that may
be available are the following:

2

m (Two-Wheel Drive High) : This

setting is used for driving in most
street and highway situations.

AUTO (Automatic Four-Wheel
Drive) : This setting is ideal for use

when road surface traction conditions
are variable.

Do not use AUTO mode to park on a
steep grade with poor traction such as
ice, snow, mud or gravel. In AUTO
mode only the rear wheels will hold
the vehicle from sliding when parked.

If parking on a steep grade, use 4
keep all four wheels engaged.

m (Four-Wheel Drive High) : Use

4

this setting when extra traction is
needed, such as on snowy or icy roads
or in most off-road situations.

N (Neutral) : Shift to this setting only
when towing the vehicle. See Trailer
Towing 0 261.

n (Four-Wheel Drive Low) : Choose

4

n when driving in deep sand, mud,

4
or snow, and while climbing or
descending steep hills.

See Four-Wheel Drive 0 215.

m to

IN BRIEF 19

Vehicle Features

Infotainment System

See the infotainment manual for
information on the radio, audio
players, phone, navigation system,
Rear Seat Entertainment (RSE), and
voice or speech recognition. It also
includes information on settings.

Steering Wheel Controls

The infotainment system can be
operated by using the steering wheel
controls. See “Steering Wheel
Controls” in the infotainment manual.

20 IN BRIEF

Cruise Control

J : Press to turn the system on and

off. A white indicator appears in the
instrument cluster when cruise is
turned on.

+RES : If there is a set speed in
memory, press the control up briefly
to resume that speed or press and
hold to accelerate. If the cruise control
is already active, use to increase
vehicle speed.

SET− : Press the control down briefly
to set the speed and activate cruise
control. If the cruise control is already
active, use to decrease vehicle speed.

* : Press to disengage cruise control

without erasing the set speed from
memory.

See Cruise Control 0 226 or Adaptive
Cruise Control 0 229 (if equipped).

Driver Information
Center (DIC)

The DIC display is in the instrument
cluster. It shows the status of many
vehicle systems.

y or z : Move SEL up or down to

go to the previous or next selection.

S or T : Press to move between the

interactive display zones in the
cluster. Press

previous menu.

SEL : Press to open a menu or select a
menu item. Press and hold to reset
values on certain screens.

See Driver Information Center (DIC)
0 149.

S to go back to the

Forward Collision Alert
(FCA) System

If equipped, FCA may help avoid or
reduce the harm caused by front-end
crashes. FCA provides a green

indicator,
detected ahead. This indicator
displays amber if you follow a vehicle
ahead too closely. When approaching
a vehicle ahead too quickly, FCA
provides a flashing red alert on the
windshield and rapidly beeps or pulses
the driver seat.

V, when a vehicle is

See Forward Collision Alert (FCA)
System 0 244.

Forward Automatic
Braking (FAB)

If the vehicle has For ward Collision
Alert (FCA), it also has FAB, which
includes Intelligent Brake Assist (IBA).
When the system detects a vehicle
ahead in your path that is traveling in
the same direction that you may be
about to crash into, it can provide a
boost to braking or automatically
brake the vehicle. This can help avoid
or lessen the severity of crashes when
driving in a forward gear.

See Forward Automatic Braking (FAB)
0 247.

Lane Keep Assist (LKA)

If equipped, LKA may help avoid
crashes due to unintentional lane
departures. It may assist by gently
turning the steering wheel if the
vehicle approaches a detected lane
marking without using a turn signal in
that direction. It may also provide a
Lane Departure Warning (LDW) alert

as the lane marking is crossed. The
system will not assist or alert if it
detects that you are actively steering.
Override LKA by turning the steering
wheel. LKA uses a camera to detect
lane markings between 60 km/h
(37 mph) and 180 km/h (112 mph).

See Lane Departure Warning (LDW)

0 250 and Lane Keep Assist (LKA)
0 251.

Lane Change Alert (LCA)

If equipped, the LCA system is a
lane-changing aid that assists drivers
with avoiding lane change crashes
that occur with moving vehicles in the
side blind zone (or spot) areas or with
vehicles rapidly approaching these
areas from behind. The LCA warning
display will light up in the
corresponding outside mirror and will
flash if the turn signal is on. The Side
Blind Zone Alert (SBZA) system is
included as part of the LCA system.

See Side Blind Zone Alert (SBZA) 0 248
and Lane Change Alert (LCA) 0 248.

IN BRIEF 21

Surround Vision

If equipped, views around the vehicle
appear in the infotainment display to
aid with parking and low-speed
maneuvers.

See “Surround Vision” under

Assistance Systems for Parking or
Backing 0 238.

Front Vision Camera

If equipped, a view of the area in front
of the vehicle appears on the
infotainment display to aid with
parking and low-speed maneuvers.

See “Front Vision Camera” under

Assistance Systems for Parking or
Backing 0 238.

Rear Vision Camera (RVC)

If equipped, RVC shows a view of the
area behind the vehicle on the
infotainment display when the vehicle
is shifted into R (Reverse) to aid with
parking and low-speed backing
maneuvers.

See Assistance Systems for Parking or
Backing 0 238.

22 IN BRIEF

Rear Cross Traffic Alert
(RCTA) System

If equipped, the RCTA system shows a
triangle with an arrow on the
infotainment display to warn of traffic
behind your vehicle that may cross
your vehicle’s path while in
R (Reverse). In addition, beeps will
sound, or the driver seat will pulse.

See Assistance Systems for Parking or
Backing 0 238.

Park Assist

If equipped, Front and Rear Park
Assist (FRPA) uses sensors on the
front and rear bumpers to assist with
parking and avoiding objects during
low speed parking maneuvers.
It operates at speeds less than 8 km/h
(5 mph). FRPA may display a warning
triangle on the infotainment display
and a graphic on the instrument
cluster to provide the object distance.
In addition, multiple beeps or seat
pulses may occur if very close to an
object.

The vehicle may also have a higher
speed Backing Warning System and
the Reverse Automatic Braking
system.

See Driver Assistance Systems 0 237.

Automatic Parking
Assist (APA)

If equipped, the APA system helps to
search for and maneuver the vehicle
into parallel or perpendicular parking
spots using automatic steering,
displays, and beeps. When the vehicle
speed is below 30 km/h (18 mph),

touch

O to enable the system.

See “Automatic Parking Assist (APA)”
under Assistance Systems for Parking
or Backing 0 238.

Reverse Automatic
Braking (RAB)

If the vehicle has Adaptive Cruise
Control (ACC) it also has the RAB
system, which is designed to help
avoid or reduce the harm caused by
backing crashes when the vehicle is
shifted into R (Reverse). If the system

detects the vehicle is backing too fast
to avoid a crash with a detected object
behind your vehicle in your path, it
may automatically brake hard to
a stop.

See Assistance Systems for Parking or
Backing 0 238.

Power Outlets

Power Outlets 12 Volt Direct
Current

Accessory power outlets can be used
to plug in electrical equipment, such
as a cell phone, MP3 player, etc.

The vehicle has five accessor y power
outlets:

.

One near the cupholders on the
center console

.

One inside the center console

.

One on the rear of the center
console

.

One in the third row seat on the
driver side

.

One in the rear cargo area on the
passenger side

Lift the cover to access and replace
when not in use.

See Power Outlets 0 128.

Sunroof

Universal Remote System

1. SLIDE Switch

2. TILT Switch

If equipped, the sunroof only operates

If equipped with the Universal Remote
system, these buttons will be in the
front overhead console.

This system provides a way to replace
up to three remote control
transmitters used to activate devices
such as garage door openers, security
systems, and home automation
devices.

See Universal Remote System 0 164.

when the ignition is on or in ACC/
ACCESSORY, or when Retained
Accessory Power (RAP) is active. See
Retained Accessory Power (RAP) 0 207.

IN BRIEF 23

Slide Switch

Express-Open/Express-Close : To
express-open the sunroof, fully press

and release
again to stop the movement. To
express-close the sunroof, fully press

and release
again to stop the movement.

Open/Close (Manual Mode) : To
open the sunroof, press and

hold
to stop the movement. Press and

hold
Release the switch to stop the
movement.

Tilt Switch

Vent : From the closed position,
press
Press

sunroof vent.

I (1). Press the switch

K (1). Press the switch

I (1). Release the switch

K (1) to close the sunroof.

J (2) to vent the sunroof.
K (2) to close the

24 IN BRIEF

When the sunroof is opened, an air
deflector will automatically raise. The
air deflector will retract when the
sunroof is closed.

The sunroof also has a sunshade
which can be pulled forward to block
sun rays. The sunshade must be
opened and closed manually.

If an object is in the path of the
sunroof while it is closing, the
automatic reversal feature will detect
the object and stop the sunroof.

See Sunroof 0 58.

Performance and
Maintenance

Traction Control/Electronic
Stability Control

The vehicle has a Traction Control
System (TCS) that limits wheel spin
and the StabiliTrak system that assists
with directional control of the vehicle
in difficult driving conditions. Both
systems come on automatically when
the vehicle is started and begins
to move.

.

To turn off TCS, press and
release

g on the center stack. The

traction off light
instrument cluster. The
appropriate Driver Information
Center (DIC) message displays.

.

To turn off both TCS and
StabiliTrak, press and hold
until i and g illuminate in the

instrument cluster and the
appropriate DIC message displays.

i displays in the

g

.

Press and release
on both systems.

StabiliTrak will automatically turn on
if the vehicle exceeds 56 km/h
(35 mph). Traction control will
remain off.

See Traction Control/Electronic Stability
Control 0 222.

g again to turn

Tire Pressure Monitor

This vehicle may have a Tire Pressure
Monitor System (TPMS).

The low tire pressure warning light
alerts to a significant loss in pressure
of one of the vehicle’s tires. If the
warning light comes on, stop as soon
as possible and inf late the tires to the
recommended pressure shown on the
Tire and Loading Information label.

See Vehicle Load Limits 0 197. The
warning light will remain on until the
tire pressure is corrected.

The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the tire
pressures are getting low and the tires
need to be inf lated to the proper
pressure.

The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.

See Tire Pressure Monitor System
0 322.

Tire Fill Alert (If Equipped)

This feature provides visual and
audible alerts outside the vehicle to
help when inflating an underinflated
tire to the recommended cold tire
pressure. See “Tire Fill Alert (If
Equipped)” under Tire Pressure Monitor
Operation 0 323.

Fuel

Premium Recommended

Use premium 93 octane — (R+M)/2 —
unleaded gasoline in your vehicle.
TOP TIER Detergent Gasoline is
recommended. Unleaded gasoline with
an octane rating as low as 87 may be
used, but it will reduce performance
and fuel economy. See Recommended
Fuel 0 253.

E85 or FlexFuel

IN BRIEF 25

No E85 or FlexFuel

Gasoline-ethanol fuel blends greater
than E15 (15% ethanol by volume),
such as E85, cannot be used in this
vehicle.

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time to
change the engine oil and filter. The
oil life system should be reset to 100%
only following an oil change.

Resetting the Oil Life System

1. Using the DIC controls on the
right side of the steering wheel,
display OIL LIFE on the DIC. See

Driver Information Center (DIC)

0 149. When remaining oil life is
low, the CHANGE ENGINE OIL
SOON message will appear on
the display.

26 IN BRIEF

2. Press and hold SEL on the DIC
controls for a few seconds to
clear the CHANGE ENGINE OIL
SOON message and reset the oil
life at 100%.

Be careful not to reset the oil life
display accidentally at any time
other than after the oil is
changed. It cannot be reset
accurately until the next oil
change.

The oil life system can also be reset as
follows:

1. Display OIL LIFE on the DIC. See

Driver Information Center (DIC)

0 149.

2. Fully press and release the
accelerator pedal three times
within five seconds.

If the CHANGE ENGINE OIL
SOON message is not on, the
system is reset.

See Engine Oil Life System 0 284.

Driving for Better Fuel
Economy

Driving habits can affect fuel mileage.
Here are some driving tips to get the
best fuel economy possible:

.

Set the climate controls to the
desired temperature after the
engine is started, or turn them off
when not required.

.

Avoid fast starts and accelerate
smoothly.

.

Brake gradually and avoid abrupt
stops.

.

Avoid idling the engine for long
periods of time.

.

When road and weather
conditions are appropriate, use
cruise control.

.

Always follow posted speed limits
or drive more slowly when
conditions require.

.

Keep vehicle tires properly
inflated.

.

Combine several trips into a
single trip.

.

Replace the vehicle’s tires with the
same TPC Spec number molded
into the tire’s sidewall near
the size.

.

Follow recommended scheduled
maintenance.

Roadside Service

U.S.: 1-800-224-1400

Canada: 1-800-882-1112

TTY Users (U.S. Only): 1-888-889-2438

New Cadillac owners are automatically
enrolled in the Roadside Service
Program.

See Roadside Service 0 382.

Keys, Doors, and
Windows

Keys and Locks

Keys . . . . . . . . . . .. . . . . .. . . . . . . . . . . . . . . 27
Remote Keyless Entry (RKE)

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Remote Keyless Entry (RKE)

System Operation . . . . . . . . . . . . . . . . 28
Remote Vehicle Start . . . . . .. . . . . . . . 35
Door Locks . . . . . . . . . . . . .. . . . . . . . . .. . 36
Power Door Locks . . . . . . . . . . . . . . . . . 38
Delayed Locking . . . . . . . .. . . . . . .. . . . 38
Automatic Door Locks . . . . . . . . . . . . 39
Lockout Protection . . . . . . . . . . . . . . . . 39
Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . 39

Doors

Liftgate . . . . . . . . . . . . . . . .. . . . . . . . . .. . . 40
Power Assist Steps . . . . . . . . . . . . . . . . . 48

Vehicle Security

Vehicle Security .. . . . . . . . . . . . . . . . . .. 48
Vehicle Alarm System . . . . . . . . . . . . . 48
Immobilizer .. . . . . . . .. . . . .. . . .. . . . . . 50
Immobilizer Operation . . . . . . . . . . . . 50

Exterior Mirrors

Convex Mirrors . . . . . . . . . . . . . . . . . . . . 51
Power Mirrors . . . . . . . . . . . . . . . . . . . . . . 52
Folding Mirrors . . . . . . . . . . . . . . . . . . . . 52
Heated Mirrors . . . . . . . . . . . . . . . . . . . . . 53
Reverse Tilt Mirrors . . . . . . . . . . . . . . . 53

Interior Mirrors

Interior Rearview Mirrors . . . . . . . . . 53
Automatic Dimming Rearview

Mirror . . . . . . . . .. . . . . . . . . . . . . . . . . . .. 53
Rear Camera Mirror .. . . . . . . . . . . . . . 54
Child-View Mirror .. . . . . . . . . . . . . . . . . 55

Windows

Windows . . . . . . . . . . .. . . . . .. . . . . .. . . . 56
Power Windows . . . . . . . . . . . . . . . . . . . . 56
Sun Visors . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Roof

Sunroof . . . . . . . . . . . . .. . . . . . . . . . . . . . . . 58

KEYS, DOORS, AND WINDOWS 27

Keys and Locks

Keys

Warning

{

Leaving children in a vehicle with a
Remote Keyless Entry (RKE)
transmitter is dangerous and
children or others could be
seriously injured or killed. They
could operate the power windows
or other controls or make the
vehicle move. The windows will
function with the RKE transmitter
in the vehicle, and children or
others could be caught in the path
of a closing window. Do not leave
children in a vehicle with an RKE
transmitter.

28 KEYS, DOORS, AND WINDOWS

The key is used for the driver door.

See your dealer if a replacement key
or additional key is needed.

If locked out of the vehicle, see
Roadside Service 0 382.

With an active OnStar or connected
service plan, an OnStar Advisor may
remotely unlock the vehicle. See
OnStar Overview 0 392.

Press the button on the side of the
RKE transmitter to remove the key.
Never pull the key out without
pressing the button.

Remote Keyless Entry
(RKE) System

See Radio Frequency Statement 0 388.

If there is a decrease in the Remote
Keyless Entry (RKE) operating range:

.

Check the distance. The
transmitter may be too far from
the vehicle.

.

Check the location. Other vehicles
or objects may be blocking the
signal.

.

Check the transmitter’s battery.
See “Battery Replacement” later in
this section.

.

If the transmitter is still not
working correctly, see your dealer
or a qualified technician for
service.

Remote Keyless Entry
(RKE) System Operation

The Keyless Access system allows for
vehicle entry when the Remote
Keyless Entry (RKE) transmitter is
within 1 m (3 ft). See “Keyless Access
Operation” later in this section.

The RKE transmitter functions may
work up to 60 m (197 ft) away from
the vehicle.

Other conditions can affect the
performance of the transmitter. See

Remote Keyless Entry (RKE) System

0 28.

If the driver door is open when
pressed and Unlocked Door
Anti-Lockout is enabled, all doors will
lock and then the driver door will
immediately unlock. See Vehicle
Personalization 0 155. If the passenger

door is open when
doors lock.

Pressing
See Vehicle Alarm System 0 48.

If equipped with auto mirror folding,
pressing and holding

one second will fold the mirrors,
if enabled. See Vehicle Personalization
0 155.

Q arms the alarm system.

K : Press once to unlock the driver

K is pressed again within

door. If
three seconds, all remaining doors

Q : Press to lock all doors.

If enabled, the turn signal lamps flash
once on the second press to indicate
locking has occurred. If enabled, the

horn chirps when
within three seconds. See Vehicle
Personalization 0 155.

Q is pressed again

unlock. The interior lamps may come
on and stay on for 20 seconds or until
the ignition is turned on.

If enabled, the turn signal lamps flash
twice to indicate unlocking has
occurred. If enabled, the exterior
lamps may turn on. See Vehicle
Personalization 0 155.

Q is

Q is pressed, all

Q for

KEYS, DOORS, AND WINDOWS 29

Pressing
disarms the alarm system. See Vehicle
Alarm System 0 48.

If equipped with auto mirror folding,
pressing and holding

one second will unfold the mirrors,
if enabled. See Vehicle Personalization
0 155.

Press and hold
fully open, if remote window
operation is enabled. See Vehicle
Personalization 0 155.

K on the RKE transmitter

K for

K until the windows

c : Press twice to open the liftglass.
b : Press twice to open or close the

liftgate. Press once to stop the liftgate
from moving.

7 : Press and release to initiate

vehicle locator. The turn signal lamps
flash and the horn sounds three times.

Press and hold
three seconds to activate the panic
alarm. The turn signal lamps flash
and the horn sounds for 30 seconds,

or until
vehicle is started. The ignition must
be off for the panic alarm to work.

7 for more than

7 is pressed again or the

30 KEYS, DOORS, AND WINDOWS

/ : If equipped, press and release Q,

then immediately press and hold
until the turn signals flash or for at
least four seconds. The engine may be
started from outside the vehicle using
the RKE transmitter. See Remote
Vehicle Start 0 35.

Keyless Access Operation

The Keyless Access system allows for
the doors and liftgate to be accessed
without pressing the RKE transmitter
button. The RKE transmitter must be
within 1 m (3 ft) of the liftgate or door
being opened. The buttons are on the
outside door handles.

Keyless Access can be programmed to
unlock all doors on the first lock/
unlock press from the driver door. See
Vehicle Personalization 0 155.

If equipped with memory seats, RKE
transmitters 1 and 2 are linked to
seating positions of memory 1 or 2.
See Memory Seats 0 65.

/

Keyless Unlocking/Locking from the
Driver Door

When the doors are locked and the
RKE transmitter is within 1 m (3 ft) of
the door handle, pressing the lock/
unlock button on the driver door
handle will unlock the driver door.
If the lock/unlock button is pressed
again within five seconds, all
passenger doors and the liftgate will
unlock.

Driver Side Shown, Passenger Similar

Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:

.

It has been no more than
five seconds since the first lock/
unlock button press.

.

Two lock/unlock button presses
were used to unlock all doors.

.

Any vehicle door has been opened
and all doors are now closed.

Keyless Unlocking/Locking from the
Passenger Doors

When the doors are locked and the
RKE transmitter is within 1 m (3 ft) of
the door handle, pressing the lock/
unlock button on a passenger door
handle will unlock all doors. Pressing
the lock/unlock button will cause all
doors to lock if any of the following
occur:

.

The lock/unlock button was used
to unlock all doors.

.

Any vehicle door has been opened
and all doors are now closed.

Disable/Enable Keyless Unlocking of
Exterior Door Handles and Liftgate

If equipped, keyless unlocking of the
exterior door handles and liftgate can
be disabled and enabled.

Disabling Keyless Unlocking:

With the vehicle off, press and hold
and K on the RKE transmitter at the

same time for approximately
three seconds. The turn signal lamps
will flash four times quickly to
indicate access is disabled. Using any
exterior handle to unlock the doors or
open the liftgate will cause the turn
signal lamps to f lash four times
quickly, indicating access is disabled.
If disabled, disarm the alarm system
before starting the vehicle.

Enabling Keyless Unlocking:

With the vehicle off, press and hold
and K on the RKE transmitter at the

same time for approximately
three seconds. The turn signal lamps
will flash twice quickly to indicate
access is enabled.

Passive Locking

Keyless Access will lock the vehicle
several seconds after all doors are
closed, if the vehicle is off and at least
one RKE transmitter has been
removed from the interior, or none
remain in the interior.

Q

If other electronic devices interfere
with the RKE transmitter signal, the
vehicle may not detect the RKE
transmitter inside the vehicle.
If passive locking is enabled, the doors
may lock with the RKE transmitter
inside the vehicle. Do not leave the
RKE transmitter in an unattended
vehicle.

To customize the doors to
automatically lock when exiting the
vehicle, see “Remote Lock, Unlock,
Start” under Vehicle Personalization
0 155.

Q

Temporary Disable of Passive
Locking

Temporarily disable passive locking by
pressing and holding

interior door switch with a door open
for at least four seconds, or until three

K on the

KEYS, DOORS, AND WINDOWS 31

chimes are heard. Passive locking will
then remain disabled until

interior door is pressed, or until the
vehicle is turned on.

Remote Left In Vehicle Alert

When the vehicle is turned off and an
RKE transmitter is left in the vehicle,
the horn will chirp three times after
all doors are closed. To turn on or off
see Vehicle Personalization 0 155.

Remote No Longer in Vehicle Alert

If the vehicle is on with a door open,
and then all doors are closed, the
vehicle will check for RKE
transmitters inside. If an RKE
transmitter is not detected, the Driver
Information Center (DIC) will display
NO REMOTE DETECTED and the horn
will chirp three times. This occurs
only once each time the vehicle is
driven. To turn on or off see Vehicle
Personalization 0 155.

Q on the

32 KEYS, DOORS, AND WINDOWS

Keyless Liftgate Opening

Press the touch pad on the rear of the
liftgate above the license plate to open
the liftgate when all doors are
unlocked or when the transmitter is
within 1 m (3 ft).

Keyless Liftglass Opening

Press the exterior liftglass button to
open the liftglass when all doors are
unlocked or when the transmitter is
within 1 m (3 ft).

Key Access

To access a vehicle with a weak
transmitter battery, see Door Locks
0 36.

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed to
the vehicle will work. If a transmitter
is lost or stolen, a replacement can be
purchased and programmed through
your dealer. The vehicle can be
reprogrammed so that lost or stolen
transmitters no longer work. Each
vehicle can have up to eight
transmitters matched to it.

Programming with Recognized
Transmitters

A new transmitter can be programmed
to the vehicle when there are two
recognized transmitters.

To program, the vehicle must be off
and all transmitters, both currently
recognized and new, must be
with you.

1. Remove the key from the
recognized transmitter.

2. Place the two recognized
transmitters in the cupholder or
on the passenger seat.

3. Remove the key lock cylinder cap
on the driver door handle. See
Door Locks 0 36. Inser t the
vehicle key into the key lock
cylinder on the driver door
handle; then turn the key
counterclockwise, to the unlock
position, five times within
10 seconds.

The DIC displays READY FOR
REMOTE #2, 3, 4, ETC.

4. Open the center console storage
area and the storage tray.

5. Place the new transmitter in the
transmitter pocket/insert, in
front of the center console
storage area.

6. Press ENGINE START/STOP.
When the transmitter is learned,
the DIC display will show that it
is ready to program the next
transmitter.

7. Remove the transmitter from the
transmitter pocket/insert and

press

K or Q on the transmitter.

To program additional
transmitters, repeat Steps 4–7.

When all additional transmitters
are programmed, press and hold
ENGINE START/STOP for
approximately 12 seconds to exit
programming mode.

8. Put the key back into the
transmitter.

9. Replace the key lock cylinder
cap. See Door Locks 0 36.

Programming without Recognized
Transmitters

If two currently recognized
transmitters are not available, follow
this procedure to program up to eight
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes to
complete. The vehicle must be off and
all transmitters to be programmed
must be with you.

1. Remove the vehicle key from the
transmitter.

2. Remove the key lock cylinder cap
on the driver door handle. See
Door Locks 0 36. Inser t the

vehicle key into the key lock
cylinder on the driver door
handle; then turn the key
counterclockwise, to the unlock
position, five times within
10 seconds.

The DIC displays REMOTE
LEARN PENDING,
PLEASE WAIT.

3. Wait for 10 minutes until the
DIC displays PRESS ENGINE
START BUTTON TO LEARN,
then press ENGINE
START/STOP.

The DIC will again display
REMOTE LEARN PENDING,
PLEASE WAIT.

4. Repeat Step 3 two additional
times. After the third time all
previously known transmitters
will no longer work with the
vehicle. Remaining transmitters
can be relearned during the next
steps.

The DIC should now display
READY FOR REMOTE # 1.

KEYS, DOORS, AND WINDOWS 33

5. Place the new transmitter in the
transmitter pocket/insert, in
front of the center console
storage area. The storage area
will need to be opened to access
the transmitter pocket/insert.

6. Press ENGINE START/STOP.
When the transmitter is learned,
the DIC display will show that it
is ready to program the next
transmitter.

7. Remove the transmitter from the
transmitter pocket/insert and

press

K or Q on the transmitter.

To program additional
transmitters, repeat Steps 5–7.

34 KEYS, DOORS, AND WINDOWS

When all additional transmitters
are programmed, press and hold
ENGINE START/STOP for
approximately 12 seconds to exit
programming mode.

8. Return the key back into the
transmitter.

9. Replace the key lock cylinder
cap. See Door Locks 0 36.

Starting the Vehicle with a Low
Transmitter Battery

If the transmitter battery is weak or if
there is interference with the signal,
the DIC may display NO REMOTE
DETECTED or NO REMOTE KEY WAS
DETECTED PLACE KEY IN
TRANSMITTER POCKET THEN
START YOUR VEHICLE when starting
the vehicle.

To start the vehicle:

1. Open the center console storage
area and the storage tray.

2. Place the transmitter in the
transmitter pocket/insert.

3. With the vehicle in P (Park) or
N (Neutral) press the brake pedal
and ENGINE START/STOP.

Replace the transmitter battery
as soon as possible.

Battery Replacement

Caution

When replacing the battery, do not
touch any of the circuitry on the
transmitter. Static from your body
could damage the transmitter.

Replace the battery if the DIC displays
REPLACE BATTERY IN REMOTE KEY.

1. Press the button on the side of
the RKE transmitter near the
bottom to remove the key. Never
pull the key out without pressing
the button.

2. Separate the two halves of the
transmitter using a flat tool
inserted into the bottom center
of the transmitter. Do not use
the key slot.

3. Remove the old battery. Do not
use a metal object.

4. Insert the new battery on the
back housing, positive side facing
down. Replace with a CR2032 or
equivalent battery.

5. Align the front and back housing
then snap the transmitter
together.

Remote Vehicle Start

The climate control system will come
on when the vehicle is started
remotely depending on the outside
temperature.

KEYS, DOORS, AND WINDOWS 35

The rear defog and heated and cooled
seats, if equipped, may also come on.
See Heated and Cooled Front Seats 0 69
and Vehicle Personalization 0 155.

Laws in some communities may
restrict the use of remote starters.
Check local regulations for any
requirements on remote starting of
vehicles.

Do not use remote start if the vehicle
is low on fuel. The vehicle could run
out of fuel.

The vehicle cannot be remote
started if:

.

The transmitter is in the vehicle.

.

The hood is not closed.

.

There is an emission control
system malfunction and the
malfunction indicator lamp is on.

.

The hazard flashers are on.

.

Two remote vehicle starts or a
start with an extension have
already been used.

.

The vehicle is not in P (Park).

36 KEYS, DOORS, AND WINDOWS

The engine will turn off during a
remote vehicle start if:

.

The coolant temperature gets
too high.

.

The oil pressure gets low.

The RKE transmitter range may be
less while the vehicle is running.

Other conditions can affect the
performance of the transmitter. See

Remote Keyless Entry (RKE) System
0 28 or Vehicle Personalization 0 155.

Starting the Engine Using Remote
Start

1. Press and release

2. Immediately press and hold
until the turn signal lamps flash
or for at least four seconds.

When the vehicle starts, the
parking lamps will turn on. The
doors will be locked and the
climate control system may
come on.

Q.

/

The engine will continue to run
for 15 minutes. Repeat
Steps 1 and 2 for one 15-minute
time extension.

Turn the ignition on to operate the
vehicle.

Extending Engine Run Time

The engine run time can be extended
by 15 minutes, for a total of
30 minutes, if during the first
15 minutes Steps 1 and 2 are repeated
while the engine is still running. An
extension can be requested
30 seconds after starting.

A maximum of two remote starts, or a
single start with an extension, is
allowed between ignition cycles.

The vehicle’s ignition must be turned
on and then back off to use remote
start again.

Canceling a Remote Start

To cancel a remote start, do one of
the following:

.

Press and hold
parking lamps turn off.

/ until the

.

Turn on the hazard warning
flashers.

.

Turn the ignition on and then off.

Door Locks

Warning

{

Unlocked doors can be dangerous.

.

Passengers, especially
children, can easily open the
doors and fall out of a moving
vehicle. The doors can be
unlocked and opened while
the vehicle is moving. The
chance of being thrown out of
the vehicle in a crash is
increased if the doors are not
locked. So, all passengers
should wear seat belts
properly and the doors should
be locked whenever the
vehicle is driven.

.

Young children who get into
unlocked vehicles may be
unable to get out. A child can
be overcome by extreme heat

(Continued)

Warning (Continued)

and can suffer permanent
injuries or even death from
heat stroke. Always lock the
vehicle whenever leaving it.

.

Outsiders can easily enter
through an unlocked door
when you slow down or stop
the vehicle. Locking the doors
can help prevent this from
happening.

To lock or unlock the doors from
inside the vehicle:

.

Press

Q or K on a power door

lock switch.

.

Push down the manual lock knob
on the driver door to lock all
doors. Push down the lock knob
on a passenger door to lock that
door only.

.

Pull the door handle once to
unlock that door. Pull the handle
again to unlatch it.

To lock or unlock the doors from
outside the vehicle:

.

Press

Q or K on the RKE

transmitter

.

Use the key in the front doors. The
key cylinder is covered by a cap.
See “Driver Door Key Lock
Cylinder Access” later in this
section.

Keyless Access

The RKE transmitter must be within
1 m (3 ft) of the liftgate or door being
opened. Press the button on the door

KEYS, DOORS, AND WINDOWS 37

handle to open. See “Keyless Access
Operation” in Remote Keyless Entry
(RKE) System Operation 0 28.

Driver Door Key Lock Cylinder
Access (Slotted Cap Access) (In
Case of Dead Battery)

To access the driver door key lock
cylinder:

1. Pull the door handle (1) to the
open position and hold it open
until cap removal is complete.

2. Insert the key (4) into the
slot (3) on the bottom of the
cap (2) and lift the key upward.

38 KEYS, DOORS, AND WINDOWS

3. Remove the cap (2).

4. Use the key (4) in the cylinder.

To replace the slotted cap:

1. Pull the door handle (1) to the
open position and hold it open
until cap installation is complete.

2. Position the bottom edge of the
cap under the lower edge of the
metal piece (6). The tabs (7)
attach to metal piece (6) at the
positions (5).

3. Rotate the cap upward to install
into place.

4. Check that the cap is secure.

5. Release the door handle.

Free-Turning Locks

The door key lock cylinder turns freely
when either the wrong key is used,
or the correct key is not fully inserted.
The free turning door lock feature
prevents the lock from being forced
open. To reset the lock, turn it to the
vertical position with the correct key
fully inserted. Remove the key and
insert it again. If this does not reset
the lock, turn the key halfway around
in the cylinder and repeat the reset
procedure.

Power Door Locks

Press Q or K on the Remote Keyless
Entry (RKE) transmitter. See Remote

Keyless Entry (RKE) System Operation
0 28.

Q : Press to lock the doors.

K : Press to unlock the doors.

Delayed Locking

This feature delays the locking of the
doors until five seconds after all doors
are closed.

Delayed locking can only be turned on
when the Unlocked Door Anti-Lockout
feature has been turned off.

When

Q is pressed on the power door

lock switch while a door or the liftgate
is open, a chime will sound three
times indicating delayed locking is
active.

The doors will lock automatically
five seconds after all doors are closed.
If a door is reopened before that time,
the five-second timer will reset when
all doors are closed again.

Q on the door lock switch again

Press
or press

lock doors immediately.

This feature can also be programmed.
See Vehicle Personalization 0 155.

Q on the RKE transmitter to

Automatic Door Locks

The doors will lock automatically
when all doors are closed, the ignition
is on, and the vehicle is shifted out of
P (Park).

If a vehicle door is unlocked and then
opened and closed, the doors will lock
either when your foot is removed from
the brake or the vehicle speed
becomes faster than 13 km/h (8 mph).

To unlock the doors:

.

.

Automatic door locking cannot be
disabled. Automatic door unlocking
can be programmed. See Vehicle
Personalization 0 155.

K on the power door lock

Press
switch.

Shift the transmission into
P (Park).

Lockout Protection

If the ignition is on or in ACC/
ACCESSORY and the power door lock
switch is pressed with the driver door
open, all the doors will lock and only
the driver door will unlock.

If the vehicle is off and locking is
requested while a door is open, when
all doors are closed the vehicle will
check for RKE transmitters inside.
If an RKE transmitter is detected and
the number of RKE transmitters inside

KEYS, DOORS, AND WINDOWS 39

has not reduced, the driver door will
unlock and the horn will chirp three
times.

Lockout Protection can be manually
overridden with the driver door open

by pressing and holding
power door lock switch.

Unlocked Door Anti-Lockout

If Unlocked Door Anti-Lockout is
turned on and the vehicle is off, the
driver door is open, and locking is
requested, all the doors will lock and
the driver door will remain open.
Press the button again to lock the
driver door. The Unlocked Door
Anti-Lockout feature can be turned on
or off. SeeVehicle Personalization 0 155.

Q on the

Safety Locks

The rear door safety locks prevent
passengers from opening the rear
doors from inside the vehicle.

40 KEYS, DOORS, AND WINDOWS

Doors

Liftgate

Warning

{

Exhaust gases can enter the vehicle
if it is driven with the liftgate or
trunk/hatch open, or with any
objects that pass through the seal
between the body and the trunk/

Press { to activate the safety locks on
the rear doors. The indicator light
comes on when activated.

{ again to deactivate the safety

Press
locks.

hatch or liftgate. Engine exhaust
contains carbon monoxide (CO)
which cannot be seen or smelled.
It can cause unconsciousness and
even death.

If the vehicle must be driven with
the liftgate or trunk/hatch open:

.

Close all of the windows.

.

Fully open the air outlets on
or under the instrument
panel.

.

Adjust the climate control
system to a setting that
brings in only outside air and

(Continued)

Warning (Continued)

set the fan speed to the
highest setting. See “Climate
Control Systems” in the Index.

.

If the vehicle is equipped with
a power liftgate, disable the
power liftgate function.

See Engine Exhaust 0 209.

Caution

To avoid damage to the liftgate or
liftgate glass, make sure the area
above and behind the liftgate is
clear before opening it.

Power Liftgate Operation

Warning

{

You or others could be injured if
caught in the path of the power
liftgate. Make sure there is no one
in the way of the liftgate as it is
opening and closing.

Caution

Driving with an open and
unsecured liftgate may result in
damage to the power liftgate
components.

The power liftgate switch is on the
overhead console. The vehicle must be
in P (Park).

The modes are:

MAX : Opens to maximum height.

3/4 : Opens to a reduced height that

can be set from 3/4 to fully open. Use
to prevent the liftgate from opening
into overhead obstructions such as a
garage door or roof-mounted cargo.
The liftgate can be manually opened
all the way.

KEYS, DOORS, AND WINDOWS 41

OFF : Opens manually only.

To power open or close the liftgate,
select MAX or 3/4 mode and then:

.

.

.

b twice quickly on the RKE

Press
transmitter until the liftgate
moves.

Press

8 on the overhead

console. The driver door must be
unlocked or locked without the
security armed.

Press the touch pad on the
underside of the liftgate handle
after unlocking all doors. A locked
vehicle can be opened if the RKE
transmitter is within 1 m (3 ft) of
the touch pad.

42 KEYS, DOORS, AND WINDOWS

.

Press any liftgate button, the touch
pad, or

while the liftgate is moving to
stop it. Pressing any liftgate

button or pressing
on the RKE transmitter restarts the
operation in the reverse direction.
Pressing the touch pad on the liftgate
handle will restart the motion, but
only in the opening direction.

l on the bottom edge of

Press
the liftgate next to the latch to
close.

b on the RKE transmitter

b twice quickly

Caution

Manually forcing the liftgate to
open or close during a power cycle
can damage the vehicle. Allow the
power cycle to complete.

The power liftgate may be temporarily
disabled in extremely low
temperatures, or after repeated power
cycling over a short period of time.
If this occurs, the liftgate can still be
operated manually.

If the vehicle is shifted out of P (Park)
while the power function is in
progress, the liftgate will continue to
completion. If the vehicle is
accelerated before the liftgate has
completed moving, the liftgate may
stop or reverse direction. Check for
Driver Information Center (DIC)
messages and make sure the liftgate is
closed and latched before driving.

Falling Liftgate Detection

If the power liftgate automatically
closes after a power opening cycle, it
indicates that the system is reacting
to excess weight on the liftgate or a
possible support strut failure.
A repetitive chime will sound while
the falling liftgate detection feature is
operating. Remove any excess weight.
If the liftgate continues to
automatically close after opening, see
your dealer for service before using
the power liftgate.

Interfering with the power liftgate
motion or manually closing the
liftgate too quickly after power
opening may resemble a support strut
failure. This could also activate the
falling liftgate detection feature. Allow
the liftgate to complete its operation
and wait a few seconds before
manually closing the liftgate.

Obstacle Detection Features

If the liftgate encounters an obstacle
during a power open or close cycle,
the liftgate will automatically reverse
direction and move a short distance
away from the obstacle. After
removing the obstruction, the power
liftgate operation can be used again.
If the liftgate encounters multiple
obstacles on the same power cycle,
the power function will deactivate.
After removing the obstructions,
manually close the liftgate. This will
allow normal power operation
functions to resume.

If the vehicle is locked while the
liftgate is closing, and an obstacle is
encountered that prevents the liftgate
from completely closing, the horn will
sound as an alert that the liftgate did
not close.

Pinch sensors are on the side edges of
the liftgate. If an object is caught
between the liftgate and the vehicle
and presses against a sensor, the

liftgate will reverse direction and stop
at a partially open position. The
liftgate will remain open until it is
activated again or closed manually.

Setting the 3/4 Mode

To change the position the liftgate
stops at when opening:

1. Select MAX or 3/4 mode and
power open the liftgate.

2. Stop the liftgate movement at
the desired height by pressing
any liftgate button. Manually
adjust the liftgate position if
needed.

3. Press and hold
bottom edge of the liftgate next
to the latch on the outside of the
liftgate until the turn signals
flash and a beep sounds. This
indicates the setting has been
recorded.

l on the

KEYS, DOORS, AND WINDOWS 43

The liftgate cannot be set below a
minimum programmable height.
If there is no light flash or sound,
then the height adjustment may be
too low.

Manual Operation

Select OFF to manually operate the
liftgate.

Caution

Attempting to move the liftgate too
quickly and with excessive force
may result in damage to the
vehicle.

Operate the liftgate manually with a
smooth motion and moderate speed.
The system includes a feature which
limits the manual closing speed to
protect the components.

44 KEYS, DOORS, AND WINDOWS

Use the pull cup to lower and close
the liftgate. Do not press the touch
pad while closing the liftgate. This will
cause the liftgate to be unlatched.

The liftgate can be opened when
locked if the RKE transmitter is within
1 m (3 ft) of the touch pad. See

Remote Keyless Entry (RKE) System
Operation 0 28.

The liftgate has an electric latch.
If the battery is disconnected or has

To open the liftgate, press K on the
power door lock switch or press

the RKE transmitter twice to unlock
all doors. Press the touch pad (1) on
the underside of the liftgate handle
and lift up.

Press the button (2) above the license
plate to open the liftglass, or press

twice quickly on the RKE transmitter.
Do not leave the liftglass open when
raising the liftgate.

There will be a delay in the release of
the liftglass if there is an attempt to
open it while the rear wiper is in
motion.

K on

c

low voltage, the liftgate will not open.
The liftgate will resume operation
when the battery is reconnected and
charged.

Hands-Free Operation

If equipped, the liftgate may be
operated with a kicking motion near
the center of the rear bumper at the
location of the projected logo. The
RKE transmitter must be within 1 m
(3 ft) of the rear bumper to operate
the power liftgate hands-free.

The hands-free feature will not work
while the liftgate is moving. To stop
the liftgate while in motion use one of
the liftgate switches.

The hands-free feature can be
customized. See Vehicle Personalization
0 155. Choose from the following:

On-Open and Close : The kicking
motion is activated to both open and
close the liftgate.

On-Open Only : The kicking motion is
activated to only open the liftgate.

Off : The feature is disabled.

Caution (Continued)

liftgate mode to OFF when cleaning
or working near the rear bumper to
avoid accidental opening.

.

Do not sweep your foot side
to side.

.

Do not keep your foot under the
bumper; the liftgate will not

Kick Zone

To operate, move your foot in a
forward kicking motion near the
center of the rear bumper at the
location of the projected logo, then
pull it back. The kick must come
within 14 cm (6 in) of the rear
bumper to activate. Then step back.

Caution

Splashing water may cause the
liftgate to open. Keep the RKE
transmitter away from the rear
bumper detection area or turn the

(Continued)

activate.

.

Do not touch the liftgate until it
has stopped moving.

This feature may be temporarily
disabled under some conditions. If the
liftgate does not respond to the kick,
open or close the liftgate by another
method or start the vehicle. The
feature will be re-enabled.

When closing the liftgate using this
feature, there will be a short delay.
The taillamps will f lash and a chime
will sound.

Step away from the liftgate before it
starts moving.

KEYS, DOORS, AND WINDOWS 45

Projected Logo

If equipped with this feature, a vehicle
logo will be projected for one minute
onto the ground near the rear bumper
when an RKE transmitter is detected
within approximately 2 m (6 ft) from
the rear bumper. The projected logo
may not be visible under brighter
daytime conditions.

.

1 m (3 ft) Hands-Free Operation
Detection Zone

.

2 m (6 ft) Projected Logo
Detection Zone

46 KEYS, DOORS, AND WINDOWS

The projected logo shows where to
kick towards the rear bumper.

The projected logo will not be
restarted using the same RKE
transmitter unless it has been out of
range for longer than 20 seconds.

If an RKE transmitter is again
detected within approximately 2 m
(6 ft) of the liftgate, or another kick
has been detected, the one-minute
timer will be reset.

The projected logo will not work
under these conditions:

.

The vehicle battery is low.

.

The transmission is not in
P (Park).

.

Hands Free Liftgate Control is set
to off in vehicle personalization.
See Vehicle Personalization 0 155.

.

Power liftgate is turned off.

.

The vehicle remains parked for
72 hours or more, with no RKE
transmitter use or Keyless Access
operation. To re-enable, press any
button on the RKE transmitter or
open and close a vehicle door.

The projected logo will not work for a
single RKE transmitter when a
transmitter:

.

Has been left within
approximately 5 m (15 ft) of the
liftgate for several minutes.

.

Has been left inside the vehicle
and all vehicle doors are closed.

.

Has approached the area outside
of the liftgate five times within
10 minutes.

KEYS, DOORS, AND WINDOWS 47

Hands-Free Liftgate and Projected Logo Availability

Action Hands-Free Liftgate Projected Logo

RKE transmitter entering projected logo
detection zone

RKE transmitter left inside projected
logo detection zone for minimum of
10 minutes

RKE transmitter brought in and out of
projected logo detection zone five times
or more within 10 minutes

Vehicle remains parked for more than
72 hours

Vehicle battery is low Non-operative Off

Transmission is not in P (Park) Non-operative Off

Power liftgate is turned off Non-operative Off

Hands-free liftgate is disabled in
vehicle personalization

Operative On for one minute

Operative Off until RKE transmitter button press

or a door is opened and closed

Operative Off for one hour or until RKE

transmitter button press or a door is
opened and closed

Operative Off until RKE transmitter button press

or a door is opened and closed

Non-operative Off

48 KEYS, DOORS, AND WINDOWS

Power Assist Steps

Warning

{

Never place hands or other body
parts between the deployed power
assist steps and the vehicle. You or
others could be seriously injured.

Warning

{

Never step on a moving assist step.
You or others could be seriously
injured.

Disable the assist steps before jacking
or placing any object under the
vehicle.

Too much ice buildup may prevent
deployment of the power assist steps.
Check the step position before exiting
the vehicle. If this happens, disable
the power assist steps, clear the ice,
then enable the assist steps and
confirm normal function prior to use.

Keep hands, children, pets, objects,
and clothing clear of the power assist
steps when in motion. The steps will
reverse direction if they encounter an
obstruction when opening or closing.
Remove the obstruction, then open
and close the door on the same side
to complete the motion of the assist
steps. If the obstruction is not cleared,
the assist steps remain extended while
driving.

To change the settings:

1. Touch

2. Touch Running Boards icon.

The options are:

OFF : Disables the power assist steps,
so they will not deploy.

ON : Power assist steps will deploy
when a door is opened. When a door
is closed the assist steps will
automatically retract after
three seconds.

Extended : Keeps the steps deployed
when the vehicle is in P (Park) or
N (Neutral). This setting may be used
when cleaning the steps.

F.

Vehicle Security

This vehicle has theft-deterrent
features; however, they do not make
the vehicle impossible to steal.

Vehicle Alarm System

The indicator light, on the instrument
panel near the windshield, indicates
the status of the system.

Off : Alarm system is disarmed.

On Solid : Vehicle is secured during

the delay to arm the system.

Fast Flash : Vehicle is unsecured.
A door, the liftgate or the hood
is open.

Slow Flash : Alarm system is armed.

Arming the Alarm System

1. Turn off the vehicle.

2. Lock the vehicle in one of
three ways:

.

Use the RKE transmitter.

.

Use the Keyless Access
system.

.

With a door open, press
on the interior of the door.

3. After 30 seconds, the alarm
system will arm and the
indicator light will begin to

slowly flash. Pressing
RKE transmitter a second time
will bypass the 30-second delay
and immediately arm the alarm
system.

The vehicle alarm system will not arm
if the doors are locked with the key.

Q

Q on the

If the driver door is opened without
first unlocking with the RKE
transmitter, the horn will chirp and
the lights will f lash to indicate
pre-alarm. If the vehicle is not started,
or the door is not unlocked by

pressing
during the 10-second pre-alarm, the
alarm will be activated.

The alarm will also be activated if a
passenger door, the liftgate, or the
hood is opened without first
disarming the system. When the
alarm is activated, the turn signals
flash and the horn sounds for about
30 seconds. The alarm system will
then re-arm to monitor for the next
unauthorized event.

K on the RKE transmitter

Disarming the Alarm System

To disarm the alarm system or turn
off the alarm if it has been activated:

.

Press

K on the RKE transmitter.

.

Unlock the vehicle using the
Keyless Access system.

.

Start the vehicle.

KEYS, DOORS, AND WINDOWS 49

To avoid setting off the alarm by
accident:

.

Lock the vehicle after all
occupants have exited.

.

Always unlock a door with the
RKE transmitter, or use the
Keyless Access system.

Unlocking the driver door with the
key will not disarm the system or
turn off the alarm.

How to Detect a Tamper
Condition

If K is pressed on the RKE
transmitter and the horn chirps three
times, an alarm occurred previously
while the alarm system was armed.

If the alarm has been activated, a
message will appear on the DIC.

Power Sounder, Inclination
Sensor and Intrusion Sensor

In addition to the standard
theft-deterrent system features, this
system may also have a power
sounder, inclination sensor and
intrusion sensor.