DESCRIPTION OF THE DEVICE
PERFORM A MEASUREMENT
Turn on the de device by pressing on «On/Off/Esc».
➢
The device displays its name «LV110», «LV111» or «LV117».
Put the probe to the required location.
➢
The device displays the velocity and temperature measurement.
FREEZE THE MEASUREMENT
During a measurement:
Press once on «Hold/min/max».
➢
«Hold» appears on screen and the measurement is frozen.
Press on «On/Off/Esc» to exit the hold function.
➢
The device returns to the measurement display.
DISPLAY THE MINIMUM AND THE MAXIMUM
Once the measurement is frozen:
Press on «Hold/min/max».
➢
The device displays the maximum value of velocity or airflow measured since the last questioning at the top of the screen and the minimum
value of velocity or airflow measured since the last questioning at the bottom of the screen.
Press again on «Hold/min/max».
➢
The device displays the maximum value of temperature measured since the last questioning at the top of the screen and the minimum value of
temperature measured since the last questioning at the bottom of the screen.
Press on «On/Off/Esc» to return to the measurements display.
➢
Vane probe thermo-anemometer
LV 110 – LV 111 – LV 117
Backlight key
Select key
OK key
On/Off/Esc key
Hold/min/max key
Kimo LV 110: Available Instructions
Note for Owners:
Guidesimo.com webproject is not a service center of Kimo trademark and does not carries out works for diagnosis and repair of faulty Kimo LV 110 equipment. For quality services, please contact an official service center of Kimo company. On our website you can read and download documentation for your Kimo LV 110 device for free and familiarize yourself with the technical specifications of device.
-
Thingy AQ
Sensor Node Quick Start Guide Thingy:AQ Wildland Fire Real-Time Monitoring System *PROTOTYPE DRAFT* Version 1.0 ● January 9, 2018 Thingy, LLC – Bellevue, WA Email – [email protected] www.gothingy.com/WLF …
AQ Measuring Instruments, 15
-
sebaKMT Correlux C-3
Consultation with SebaKMT1User ManualCorrelatorCorrelux C-3Issue: 01 (06/2015) — ENArticle number: 84416Mess- und OrtungstechnikMeasuring and Locating TechnologiesElektrizitätsnetzePower NetworksKommunikationsnetzeCommunication NetworksRohrleitungsnetzeWater NetworksAbwassernetzeSewer SystemsLeitungsortungLine Locating …
Correlux C-3 Measuring Instruments, 77
-
Jung DALI 240 PDPE
Power DALI potentiometer insert Power DALI potentiometer insert Art.-No.: 240 PDPEOperationsmanual 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to the device and result in fire and other hazards. These instructions are an integral part of the product, and must remain with the end cu …
DALI 240 PDPE Measuring Instruments, 4
-
Simpson Gima
GIMAMODBUS COMMUNICATIONSOPTIONS MODULEINSTRUCTION MANUAL32SIMPSON ELECTRIC COMPANY 520 Simpson AvenueLac du Flambeau, WI 54538-0099 (715) 588-3311 FAX (715) 588-3326Printed in U.S.A. Part No. 06-116937 Edition 2, 06/07Visit us on the web at: www.simpsonelectric.com …
Gima Measuring Instruments, 16
-
Tesla TSRP3
Manual also available on www.tesla.cz EN TERA Radon Program TSRP3 WLAN Wireless and USB Radon Soil Probe Technical Specifications & Operation Manual v.1 – 2019 Table of Contents 1 Introduction ………………………………………………………………………………………………………………………………………….2 2 Description and Utilization …. …
TSRP3 Measuring Instruments, 8
-
Hocom EG-N2N
1/3 SETTING OF SPEED METER （EG-N2N） AND INSTRUCTION MANUAL （1）ARRANGEMENT OF SW1 DIP SWITCH AND SHORT CHIP： “LOCK ON” SWITCH﹐WHEN IT WAS SWITCHED“ON”﹐IT CAN BE SET H. L. ONLY （2）DESCRIPTION OF CODE （IT WILL DISPLAY IN FOLLOWING SEQUENCE AT THE FACE BOARD）： BASIC RATIO VALUE。 Ｈ SETTING OF HIGH LIMIT AL2。 Ｌ SETTING OF LOW LIMIT …
EG-N2N Measuring Instruments, 3
-
Inspect USA PM-1051
Economy ModelAIR QUALITY MONITOR Model : PM-1051Thank you for your purchase of this AIR QUALITY MONITOR Please read the following instructions carefully and always keep this manual within easy reach. OPERATION MANUAL …
PM-1051 Measuring Instruments, 15
-
ring RBA50
BATTERYANALYSERRBA50www.ringautomotive.co.ukINSTRUCTIONSRetain these instructions for future referenceBattery AnalyserAnalyseur de de batterieBatterie-AnalysatorAnalizzatore della batteriaAnalizador de la bateríaAnalisador da bateriaBatterianalysatorBatterij analyseapparaatBatterianalysatorAkun analysointilaiteBatterianalysatorNarzędzie do badania akumulatoraAnalyzátor bateriíAnalizor de bater …
RBA50 Measuring Instruments, 6
-
Dilon Navigator 2.0
User/Service Manual Manufactured by: Authorized European Representative: Dilon Technologies, Inc. AG Medical 12050 Jefferson Avenue Route de l’Orme, Suite 340 Parc des Algorithmes — Imm. «Homère» Newport News, VA 23606 91190 Saint-Aubin USA France Phone: 1-844-DILONNAV http://ag-medical.com/ …
Navigator 2.0 Measuring Instruments, 43
Popular Measuring Instruments User Guides:
PERFORM AN AVERAGE IN VELOCITY
The device is on and displays the measurement.
Press on «OK».
➢
«START» displays on screen.
Press on «OK», the average calculation is launched, «END» displays on screen, «AVG» blinks.
➢
Press on «OK» to stop the calculation, the average displays.
➢
Press on «OK» to display the maximum and minimum values measured during the calculation of this average.
➢
Press on «On/Off/Esc» to exit the average function and return to the measurements display.
➢
DISPLAY AND MEASURE THE AIRFLOW
It is possible to display and to measure the airflow in place of the velocity.
The device is on and displays the velocity and temperature measurements.
Press on «Select».
➢
«MODE» blinks on screen.
Press on «OK».
➢
«VELO» blinks at the bottom of the screen.
Press on «Select» to select the «FLOW» mode then press on «OK» to validate.
➢
Depending on the device type, «CIRC», «K 25 85», «CONE» or «RECT» blinks at the bottom of the screen.
Press on «Select» to select rectangular «RECT», «CIRC», «K 25 85» (LV110) or «CONE» (LV111) for a measurement with an airflow cone
➢
then press on «OK».
If «RECT» or «CIRC» is selected, the measuring unit of the type of duct displays.
Press on «Select» to select the unit: mm or inch then press on «OK» to validate.
➢
If the type of selected duct is circular: «DIAM» displays and the first digit blinks.
●
Press on «Select» to select its value then press on «OK» to validate. Perform the same procedure to select the values of the following
digits (to return to the previous digit press on «On/Off/Esc»). When the last digit is adjusted, press on «OK» to validate. The device
returns to the display of airflow and temperature measurements.
If the type of selected duct is rectangular: «LENGT» displays on screen and the first digit blinks.
●
Press on «Select» to select its value then press on «OK» to validate. Perform the same procedure to select the values of following
digits (to return to the previous digit press on «On/Off/Esc»). When the last digit is adjusted, press on «OK».
«WIDTH» to adjust the width displays on screen, perform the same procedure to select the digits value, when the last digit is
adjusted, press on «OK» to validate. The device returns to the display of airflow and temperature measurements.
If «K 25 85» is selected (LV110): the device returns to the measurements display.
●
If «CONE» is selected (LV111): «CONE» displays on screen and the cone type blinks: K35, K75, K120, K150.
●
Press on «Select» to select the type of cone, then press on «OK» to validate. The device returns to the display of airflow and
temperature measurements.
The length, the width and the section diameter are adjustable from 1 to 3000 mm
ADJUST THE DEVICE
Device drop-down menu
SEL.
MODE
1x
Select
VELO
SEL.
UNIT
2x
Select
m/s
.
SEL.
UNIT
3x
Select
°C
SEL.
4x
AUTO
Select
OFF
OFF
SEL.
BEEP
5x
Select
ON
Table of Contents for Kimo LV 110:
-
PERFORM A MEASUREMENT ➢ Turn on the de device by pressing on “On/Off/Esc”. The device displays its name “LV110”, “LV111” or “LV117”. ➢ Put the probe to the required location. The device displays the velocity and temperature measurement. Vane probe thermo-anemometer LV 110 – LV 111 – LV 117 DESCRIPTION OF THE DEVICE OK key Hold/min/max key Select key Backlight key On/Off/Esc key FREEZE THE MEASUREMENT During a measurement: ➢ Press once o
-
ADJUST THE DEVICE PERFORM AN AVERAGE IN VELOCITY The device is on and displays the measurement. ➢ Press on “OK”. “START” displays on screen. ➢ Press on “OK”, the average calculation is launched, “END” displays on screen, “AVG” blinks. ➢ Press on “OK” to stop the calculation, the average displays. ➢ Press on “OK” to display the maximum and minimum values measured during the calculation of this average. ➢ Press on “On/Off/Esc” to exit the average function and return to the measurements display. DISPLAY AND MEASURE TH
-
➢ Remove the front part at the back of the device. ➢ Change the old batteries by AAA LR03 1.5V batteries. ➢ Replace the front part. CHANGE THE BATTERIES The device is on. ➢ Press on “Backlight” to activate the device backlight. ➢ Press again on this key to deactivate the backlight. ACTIVATE THE BACKLIGHT Activate or deactivate the keys beep The device is on and displays the measurement. ➢ Press on “Sele
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Kimo LV 110 device using right now.
PERFORM A MEASUREMENT
➢
Turn on the de device by pressing on “On/Off/Esc”.
The device displays its name “LV110”, “LV111” or “LV117”.
➢
Put the probe to the required location.
The device displays the velocity and temperature measurement.
Vane probe thermo-anemometer
LV 110 – LV 111 – LV 117
DESCRIPTION OF THE DEVICE
OK key
Hold/min/max key
Select key
Backlight key
On/Off/Esc key
FREEZE THE MEASUREMENT
During a measurement:
➢
Press once on “Hold/min/max”.
“Hold” appears on screen and the measurement is frozen.
➢
Press on “On/Off/Esc” to exit the hold function.
The device returns to the measurement display.
DISPLAY THE MINIMUM AND THE MAXIMUM
Once the measurement is frozen:
➢
Press on “Hold/min/max”.
The device displays the maximum value of velocity or airflow measured since the last questioning at the top of the screen and the minimum
value of velocity or airflow measured since the last questioning at the bottom of the screen.
➢
Press again on “Hold/min/max”.
The device displays the maximum value of temperature measured since the last questioning at the top of the screen and the minimum value of
temperature measured since the last questioning at the bottom of the screen.
➢
Press on “On/Off/Esc” to return to the measurements display.