Ioptron skyguider pro инструкция на русском

инструкцияiOptron SkyGuider Pro

SkyGuider™ Pro Camera Mount

Instruction Manual

Product #3550, #3550A, #3551 and #3552

Посмотреть инструкция для iOptron SkyGuider Pro бесплатно. Руководство относится к категории Без категории, 1 человек(а) дали ему среднюю оценку 7.5. Руководство доступно на следующих языках: английский. У вас есть вопрос о iOptron SkyGuider Pro или вам нужна помощь? Задайте свой вопрос здесь

Количество вопросов: 0

Главная

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о iOptron SkyGuider Pro.

Не нашли свой вопрос? Задайте свой вопрос здесь

1. Manuals
2. Brands
3. iOptron Manuals
4. Camera Accessories
5. SkyGuider Pro
6. Instruction manual

• Page 1
  ® SkyGuider™ Pro Camera Mount Instruction Manual Product #3550, #3551 and #3552…

• Page 2: Table Of Contents

  Please don’t charge the battery or use USB power at or below 0°C (32°F), otherwise the rechargeable battery might be permanently damaged. Ver.1.0 iOptron Corp. reserves the rights to revise this instruction without notice. Actual color/contents/design may differ from those described in this instruction.

• Page 3: Skyguider Tm Pro Camera Mount Overview

  Pro Camera Mount Overview Introducing The SkyGuider Pro — iOptron’s next generation camera tracking device! Leading the camera tracker market for nearly four years, iOptron’s SkyGuider Pro pushes closer to perfection. Figure 1. SkyGuider Pro mount head only The redesigned SkyGuiderr…

• Page 4
   Silent tracking for smooth camera motion, perfect for long-term exposures  Detachable alt-azi base with fine latitude and azimuth adjusters for easy polar alignment  Includes iOptron AccuAlign dark-field illuminated polar scope  Adjustable polar scope illumination  4 tracking speed (1X, 1/2X, solar and lunar). 1X celestial tracking for imaging the sky and stars;…
• Page 5
   Counterweight and CW shaft  Vixen dovetail saddle for scope mounting  Optional ball head available separately (#3305A)  Optional tripod (#3221)  Optional Go2Nova® 8408 hand controller (#8408)  Optional DSLR camera shutter trigger cable…

• Page 6: Skyguider Tm Pro Camera Mount Assembly

  2. SkyGuider Pro Camera Mount Assembly 2.1. Introduction You have just purchased a tracking camera mount that is capable of taking your astrophotography to a new level.. When aligned the polar axis of the SkyGuider Pro camera mount with the celestial North Pole (CNP), or celestial South Pole (CSP), the mount will provide rotation matching the celestial sphere rotation around the Earth.

• Page 7: Assembly Terms

  8408 hand controller  Or other application/program to calculate the pole star position. Please refer to FAQ session under Support at http://www.ioptron.com for more information. ONLINE CONTENTS (click under “Support” menu) www.iOptron.com  This manual  Quick Start Guide …

• Page 8
  Figure 5. Control panel and ports of a SkyGuider Pro mount head 5- Power switch 10- GUIDE port for ST-4 autoguiding 6- Battery status indicator 11- Camera shutter triggering port 7- Function button 12- Micro USB port 8- Direction button 13- HBX port for optional hand controller 9- Mount status indicator Figure 6.

• Page 9: Skyguider Tm Pro Camera Mount Assembly

  Figure 7. DEC mounting bracket and counterweight package 23- Vixen-type dovetail saddle 28- 3/8” Ball head mounting screw 24- DEC camera mounting block 29- Counterweight shaft 25- DEC base 30- Counterweight shaft safety screw 26- DEC mounting bracket 31- Counterweight 27- Screws for dovetail saddle mounting 2.4.

• Page 10
  You may use an external battery/power to power the mount through the USB port while using the mount Please don’t charge the battery or use USB power when temperature is at or below 0°C (32°F), otherwise the rechargeable battery might be permanently damaged. If the mount is not to be used for an extended period of time, charge the battery in full and recharge every 6 months.
• Page 11
  payload. The latitude adjustment range can be from -30° to 65°. If possible, choose the one with the center of gravity of the system as close to the center of the base as possible. The factory default mounting position is on 30° side. Figure 11.
• Page 12
  Figure 13. Attach a camera For a heavy DSLR, especially with a long lens (more than 1.5kg or 3.3lbs, including lens) A DEC Mounting Bracket with a counterweight (CW) and CW shaft (or Balance Package) is needed for better balance and performance. To install the DEC Mounting Bracket, remove the Camera Mounting Block from the mount.
• Page 13
  Release the RA Clutch Disk by tuning it counterclockwise (CCW) while holding the DEC Mounting Bracket. Slowly move the camera/CW to horizontal position and balance the load in RA direction by moving the CW in or out. More than one CW may be used. Return the mount to upward position and lock the RA Clutch Disk again.
• Page 14
  STEP 4. Set the SkyGuider Pro mount Assuming you are using the SkyGuider Pro mount with the alt-azi base and located in northern hemisphere. Face the mount to the true north with assistance of a compass or an electronic compass from your smart phone. Please note that true north is not necessarily aligned to the magnetic north from you compass.
• Page 15
  Figure 19. Polar scope dial Figure 20. Polar scope app on an iPhone To maximize the benefits of the iOptron polar scope for polar alignment, you need to know where the Polaris is in the northern hemisphere. (or Sigma Octantis in southern hemisphere.) You may find this information via an iPhone/iPad app (iOptron Polar Scope in Apple iTune store).
• Page 16
  Press the power switch on the mount to turn the SkyGuider Pro mount on. Remove metal polar scope cover in the back and polar axis cover in front. (If you are not using the DEC Mounting Bracket, you have to remove the Camera Mounting Block and ball head to expose the polar scope.) Look through the polar scope eyepiece.

• Page 17: Advanced Application

  3. Advanced Applications The SkyGuider Pro mount is a versatile mount that can be used in many ways. Here are some advanced applications/functions. 3.1. Autoguide The SkyGuider Pro mount is equipped with a ST-4 compatible guiding port to enable autoguiding while tracking. The default guiding speed is (1 ± 0.5X). You may change it from (1 ± 0.1X) to (1 ±…

• Page 18: Dual Camera/Scope Mount

  3.3. Dual Camera/Scope Mount The SkyGuider Pro mount is also capable of dual camera/scope mounting as shown below. To maintain a proper balance, you may mount the cameras/scope to DEC mounting bracket with or without extra ball heads, with or without counter weight shaft/CW, with additional accessories. Figure 25.

• Page 19
   Serial port: connect the HC to a Computer via a RS232 to 4 pin 4 wire (4P4C) RJ9 cable (iOptron item# 8412) for hand controller firmware upgrade. The pin out of the serial port is shown in Figure 27.

• Page 20: Go2Nova ® 8408 Hand Controller Function

  Firmware Information This function displays the position of the Pole Star for Quick Polar Alignment using the ® iOptron AccuAlign polar scope. In the Northern Hemisphere the position of Polaris is displayed, while in the Southern Hemisphere the position of Sigma Octantis is shown.

• Page 21
  Polar Star Position Settings Tracking Photography Firmware Information A. Set Time and Site The correct time and coordinates are important to display the Pole star position correctly. Press MENU=>Settings=>Set Time and Site Set Time and Site Set Beep Set Display Set Tracking Rate Press ENTER.
• Page 22
  Set Observation Site Coordinate The third and fourth lines display the longitude and latitude coordinates, respectively. “W/E” means western/eastern hemisphere; “N/S” means northern/southern hemisphere; “d” means degree; “m” means minute; and “s” means second. Press ◄ or ► key to move the cursor and using ▲ or ▼ key to toggle between “W” and “E”, “N”…
• Page 23
  Sidereal Rate E. Set Eyepiece Light Use this function to adjust the light intensity of SkyGuider Pro illuminated polar scope. If you have an illuminated-reticule eyepiece and has the same socket, you may use this option to adjust its light intensity.
• Page 24
  3.4.2.3. Tracking Photography When a supported camera is connected to the mount via a electric shutter trigger cable, the camera can be controlled by the hand controller. You can set the camera Shutter Length, time between each shot (Interval) and total Number of Shots. You may use these images to make time lapse video later.

• Page 25: Maintenance And Servicing

  When mapping the Polaris position from the 24 hrs dial to iOptron polar scope, you need to divide it by 2, i.e. the reading on the dial is 10 o’clock, then you should put the Polaris in your polar scope at 5 o’clock.

• Page 26: Ioptron Customer Service

  Department. Customer Service hours are 9:00 AM to 5:00 PM, Eastern Time, Monday through Friday. In the unlikely event that the mount requires factory servicing or repairing, write or call iOptron Customer Service Department first to receive a RMA# before returning the mount to the factory.

• Page 27: Appendix A. Technical Specifications (For #3550 Only)

  Appendix A. Technical Specifications (for #3550 only) Mount Compact single axis tracking EQ Payload (MAX) 11 lbs (5kg) Mount weight 2.2 lbs (1kg) with battery Mount weight with base 3.2 lbs (1.450kg) with battery Body material Die-cast aluminum RA shaft Φ35mm, steel Worm wheel Φ88mm, 144 teeth aluminum alloy…

• Page 28: Ioptron One Year Telescope, Mount, And Controller Warranty

  Parts or product for which replacement is made shall become the property of iOptron. The customer shall be responsible for all costs of transportation and insurance, both to and from the factory of iOptron, and shall be required to prepay such costs.

• Печать

Страницы: «Пред. 1 2 3 [4]  Все   Вниз

A A A A

Тема: SkyTracker — походная монтировочка от iOptron  (Прочитано 12317 раз)

• Печать

Страницы: «Пред. 1 2 3 [4]  Все   Вверх