Jcb 540 170 мануал

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for jcb 540-170

• 127, Section 3-1 — Routine Maintenance Introduction Health and Safety 3-1-4 3-1-4 9803/3750-05 (3-22-00) Warning Symbols The following warning symbols may be found on the battery. First Aid — Electrolyte Do the following if electrolyte: Gets into your eyes Immediately flush with water for 15 minutes, always get medical help. Is swallowed Do not induce vomiting. Drink large q…

• 97, Section 2-1 — Care and Safety Safety Notices Safety Check List 2-1-12 2-1-12 9803/3750-05 (2-01-01) !MCAUTION It is illegal to pollute drains, sewers or the ground. Clean up all spilt fluids and/or lubricants. Used fluids and/or lubricants, filters and contaminated materials must be disposed of in accordance with local regulations. Use authorised waste disposal sites. INT-3-2-14…

• 112, Section 2-2 — Care and Safety General Procedures Hydraulic Contamination 2-2-11 2-2-11 9803/3750-05 (2-02-01) Hydraulic Contamination TE-002_2 Hydraulic Fluid Quality Construction machinery uses a large volume of fluid in the hydraulic system for power transmission, equipment lubrication, rust prevention and sealing. According to a survey conducted by a pump manufacturer, seventy per …

• 10, Section 1-1 — General Information Applications Tables 1-1-4 1-1-4 9803/3750-05 (1-14-01) Section 3 — Routine Maintenance Machine models Topic Ref Title Variant 540-170 5AF 550-140 5AG 540-140 5AL 550-170 5AM 535-125 HiViz 5AN 535-140 HiViz 5AP 3-1 Introduction All Machines 3-2 Service Schedules — Machines with SD and SF Engines Mechanical F.I. engines z zzzzz 3-3 Service Schedules — …

• 92, Section 2-1 — Care and Safety Safety Notices Safety Check List 2-1-7 2-1-7 9803/3750-05 (2-01-01) Operating Safety !MWARNING Machine Condition A defective machine can injure you or others. Do not operate a machine which is defective or has missing parts. Make sure the maintenance procedures in this manual are completed before using the machine. INT-2-1-2_2 !MWARNING Machine …

• 51, Section 1-5 — General Information Service Tools Tool Detail Reference 1-5-9 1-5-9 9803/3750-05 (1-06-00) Fig 21. 892/00905 LMI Test Box For testing load moment indicator system Fig 22. 993/85700 Battery Tester ProCarManuals.com
  …

• 132, Section 3-2 — Routine Maintenance Service Schedules — Machines with SD and SF Engines Pre-start Cold Checks, Service Points and Fluid Levels 3-2-5 3-2-5 9803/3750-05 (3-20-00) Lift/Displacement/Tilt/Steer Ram Pivot Pins — Grease   Extension Ram Piston Rod Pivot Pin — Grease  All Other Pivot Pins — Grease  Fire Extinguisher (if fi…

• 136, Section 3-3 — Routine Maintenance 3-3-1 3-3-1 9803/3750-05 (3-21-00) Service Schedules — Machines with SE Engines Related Topics Table 1. Related Topics in This Publication The table lists other topics in the manual that contain information related to this topic. Refer to the applicable topics to complete your procedures. Where applicable the text in this section contains cross references t…

• 72, Section 1-7 — General Information Fuel Related Topics 1-7-2 1-7-2 9803/3750-05 (1-08-00) Related Topics Table 1. Related Topics in This Publication The table lists other topics in the manual that contain information related to this topic. Refer to the applicable topics to complete your procedures. Where applicable the text in this section contains cross references to this page to help you find …

• 45, Section 1-5 — General Information Service Tools Numerical List 1-5-3 1-5-3 9803/3750-05 (1-06-00) 892/00822 Splined Bolt Socket K Fig 58. ( T 1-5-21) 892/00842 Glass Lifter K Fig 3. ( T 1-5-6) 892/00843 Folding Stand for Holding Glass K Fig 4. ( T 1-5-6) 892/00844 Long Knife K Fig 17. ( T 1-5-8) 892/00845 Cartridge Gun K Fig 5. ( T 1-5-6) 892/00846 Glass Extractor (Ha…

• 38, Section 1-4 — General Information Torque Settings Hydraulic Connections 1-4-6 1-4-6 9803/3750-05 (1-05-00) Hydraulic Connections T11-003 ‘O’ Ring Face Seal System Adaptors Screwed into Valve Blocks Adaptor screwed into valve blocks, seal onto an ‘O’ ring which is compressed into a 45° seat machined into the face of the tapped port. Table 8. Torque S…

• 17, Section 1-1 — General Information Applications Tables 1-1-11 1-1-11 9803/3750-05 (1-14-01) Section K — Engine Machine models Topic Ref Title Variant 540-170 5AF 550-140 5AG 540-140 5AL 550-170 5AM 535-125 HiViz 5AN 535-140 HiViz 5AP K1 Stop and Start SYSTEM (Mechanical F.I. Engines) zzzzzz K2 Stop and Start SYSTEM (Electronic F.I. Engines) zzzz K3 Cold Start Heater SYSTEM Me…

• 95, Section 2-1 — Care and Safety Safety Notices Safety Check List 2-1-10 2-1-10 9803/3750-05 (2-01-01) !MWARNING Scaffolding Overloaded scaffolding can collapse. Never load scaffolding beyond the regulation capacity. 5-1-4-6 !MCAUTION Overhead Clearance A raised boom can strike overhead objects. Always check for overhead clearance before raising the boom. 5-1-5-1 !MWARNING B…

• 96, Section 2-1 — Care and Safety Safety Notices Safety Check List 2-1-11 2-1-11 9803/3750-05 (2-01-01) Maintenance Safety !MWARNING Communications Bad communications can cause accidents. If two or more people are working on the machine, make sure each is aware of what the others are doing. Before starting the engine make sure the others are clear of the danger areas; examples of danger area…

• 3, Copyright © 2004 JCB SERVICE. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB SERVICE. World Class Customer Support 9803/3750-05 Publication No. Issued by JCB Technical Publications, JCB Aft…

• © 2011 Alamo Group Inc.$0.002409Published 01/11 Part No. F-3644COPERATOR’S MANUAL RHINO® 1020 S. Sangamon Ave.Gibson City, IL 60936800-446-5158Email: [email protected] Operator’s Manual is an integral part of the safe operation of this machine and mustbe maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safetyand Operation Ins …

  RHINO 2409 106

• © 2011 Alamo Group Inc.$0.002409TLPublished 01/11 Part No. F-4203COPERATOR’S MANUAL RHINO® 1020 S. Sangamon Ave.Gibson City, IL 60936800-446-5158Email: [email protected] Operator’s Manual is an integral part of the safe operation of this machine and mustbe maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safe …

  2409TL 104

• Original Instructions (EN)TrailerDingo TX 413 Compact Utility LoaderModel No. 22999Form No. 3351-919Setup InstructionsNote: Determine left and right sides of the machine fromthe normal operating position.SetupInstall attachment holder to the base trailer by sliding thepost on the attachment holder into the pocket on the trailer(Fig. 1).123Figure 11. Base trailer2. Pocket3. License plat …

  Dingo TX 413 4

• Printedin U.S.A.© 2017 CNH Industrial America LLC. All Rights Reserved. Case is a trademark registered in the United States and manyother countries, owned or licensed to CNH Industrial N.V.,its subsidiaries or affiliates.Part number 481945421st edition EnglishNovember 2017SERVICE MANUAL580N EPTier 4B (final)Tractor Loader BackhoePIN NHC740227 and above …

  580N EP 61

• Woody Equipment Inc., 205 rue Commercial, Saint-Odilon-de-Cranbourne, Quebec, Canada G0S3A0T. (418) 464-2748 F. (418) 464-2746 Email: [email protected] <mailto:[email protected]> Website: www.equipementswoody.com <http://www.equipementswoody.com/> Facebook: Equipements WoodyWoody Log LoaderOperator’s Manual Models: 130 HD — 150 HD — 170 HD …

  130 HD 31

• 6902732 (2-06) Printed in U.S.A. © Bobcat Company 2006ServiceManualS/N 525011001 & AboveS/N 525111001 & AboveS/N 525211001 & AboveS/N 525311001 & AboveINCLUDES HIGH FLOWEQUIPPED WITHBOBCAT INTERLOCKCONTROL SYSTEM (BICS™) …

  S185 933

• © 2011 Alamo Group Inc.$0.002387Published 01/11 Part No. 50069202OPERATOR’S MANUAL BUSH HOG® 2501 Griffin Ave.Selma, AL 36703334-874-2700www.bushhog.comLOADERThis Operator’s Manual is an integral part of the safe operation of this machine and mustbe maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safetyand Operation Instruc …

  2387 104

• 1350 S/N’s 4170017 – Current ________________________________________________ MINI SKID LOADER MODEL 1350 PRO-SERIES ________________________________________________ OPERATOR’S MANUAL ________________________________________________ RAMROD Equipment (A Division of Leon’s Mfg. Company Inc.) Canada P.O. Box 5002 135 York Road East Y …

  TASKMASTER 1350 PRO Series 37

• TANDBERG DATA StorageLoaderTMINSTALLATION AND USER MANUAL TANDBERG DATA ASA P.O. Box 134 Kjelsås N-0411 OSLO, NORWAY Phone + 47 22 18 90 90 Telefax + 47 22 18 95 50 © Tandberg Data ASA Part No. 433061-02June 2005 …

  StorageLoader 83

• Section 2-1 — Care and Safety Safety Notices Important Information 2-1-2 2-1-2 9803/3750-05 (2-01-01) Important Information T1-042 The Operator Manual !MWARNING You and others can be killed or seriously injured if you operate or maintain the machine without first studying the Operator Manual. You must understand and follow the instructions in the Operator Manual. If you do not understand anything, ask your employer or JCB dealer to explain

• Section 3-3 — Routine Maintenance Service Schedules — Machines with SE Engines Introduction 3-3-8 3-3-8 9803/3750-05 (3-21-00) Page left intentionally blank ProCarManuals.com
  

• Section 1-3 — General Information 1-3-1 1-3-1 9803/3750-05 (1-02-01) Machine Identification Introduction This topic contains information about a machine identification. On the machine and on the machine devices there are identification data plates. K Related Topics ( T 1-3-2) K Machine Identification Plate ( T 1-3-3) K Typical Product Identification Number (PIN) ( T 1-3-3) K Component Identification Plates ( T 1-3-5) K Typical Engine Identifi

• Section 2-2 — Care and Safety General Procedures Battery Charging System Precautions 2-2-15 2-2-15 9803/3750-05 (2-02-01) Battery Charging System Precautions Obey the procedures below to prevent damage to the alternator and battery. 1 Ensure that the battery negative terminal is connected to the earthing cable. 2 Never make or break connections to the battery or alternator, or any part of the charging circuit whilst the engine is

• Section 3-2 — Routine Maintenance Service Schedules — Machines with SD and SF Engines Pre-start Cold Checks, Service Points and Fluid Levels 3-2-5 3-2-5 9803/3750-05 (3-20-00) Lift/Displacement/Tilt/Steer Ram Pivot Pins — Grease   Extension Ram Piston Rod Pivot Pin — Grease  All Other Pivot Pins — Grease  Fire Extinguisher (if fitted) — Check   Wing Mirrors Condition and Security — Check   ROPS/FOPS Structure — Check �

• Page No.Contents Section 1 — General Information 1-i 1-i Applications Introduction ………………………………………………………………………………… 1-1-1 Tables ……………………………………………………………………………………….. 1-1-2 Use Introduction ………………………………………………………………………………… 1-2-1 Scope ……………………………………………

• Section 3-2 — Routine Maintenance Service Schedules — Machines with SD and SF Engines Functional Test and Final Inspection 3-2-8 3-2-8 9803/3750-05 (3-20-00) Chassis Levelling (Sway) Cut-out (if fitted) (2) — Check  BRAKES Foot Brake — Operation — Check  Park Brake — Check/Adjust  ELECTRICS Starter Motor (2) — Check  Alternator — Output (

• Section 1-2 — General Information Use Hydraulic Schematic Codes 1-2-5 1-2-5 9803/3750-05 (1-01-00) Hydraulic Schematic Codes Colour Codes The following colour coding, used on illustrations to denote various conditions of oil pressure and flow, is standardised throughout JCB Service Publications. Red Full Pressure: Pressure generated from operation of a service. Depending on application this may be anything between neutral circuit pressure and LSRV operating pressure. Pink Pressure: Pressure that is above neutral circuit pr

• Section 3-2 — Routine Maintenance Service Schedules — Machines with SD and SF Engines Functional Test and Final Inspection 3-2-7 3-2-7 9803/3750-05 (3-20-00) Functional Test and Final Inspection Operation 10 50 100 (1) 500 1000 2000 6000 ENGINE Idle Speed (2) — Check and Adjust  Torque Converter Stall Speed (2) — Check  Max. No-Load Speed (2) — Check and Adjust  Exhaust Smoke — Check  Exhaust

• Section 1-5 — General Information Service Tools Slide Hammer Kit 1-5-26 1-5-26 9803/3750-05 (1-06-00) Page left intentionally blank ProCarManuals.com
  

• Section 1-5 — General Information Service Tools Tool Detail Reference 1-5-11 1-5-11 9803/3750-05 (1-06-00) Fig 25. 892/00349 Crimp Tool Fig 26. Splice 892/00351 Splice 0.5-1.5 mm (Red) 892/00352 Splice 1.5-2.5 mm (Blue) 892/00353 Splice 3.0-6.0 mm (Yellow) ProCarManuals.com
  

• Section 1-5 — General Information Service Tools Tool Detail Reference 1-5-15 1-5-15 9803/3750-05 (1-06-00) Fig 35. ‘T’ Adapters 892/00047 3/8 in. BSP (A) x 1/4 in. BSP (B) 892/00048 1/2 in. BSP (A) x 1/4 in. BSP (B) 892/00049 5/8 in. BSP (A) x 1/4 in. BSP (B) 816/50043 3/4 in. BSP (A) x 1/4 in. BSP (B) 892/00051 1 in. BSP (A) x 1/4 in. BSP (B) 816/50005 1/2 in. BSP (A) x 1/2 in. BSP (B) 816/60096 3/4 in. BSP (A) x 3/4 in. BSP (B) 816/00017 1 in. BSP

• Section 3-3 — Routine Maintenance Service Schedules — Machines with SE Engines Introduction 3-3-7 3-3-7 9803/3750-05 (3-21-00) BRAKES Foot Brake — Operation — Check  Park Brake — Check/Adjust  ELECTRICS Alternator — Output (2) — Check  All Electrical Equipment Operation, (warning lights, beacon, alarms, horn, wipers etc.) — Check  Load Moment Indicator (2) —