Jvc kd g227 инструкция на русском языке

Инструкция и руководство для
JVC KD-G227 на русском на английском

34 страницы подробных инструкций и пользовательских руководств по эксплуатации

ENGLISH РУCCKИЙ CD RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ…

Kd-g227, Instructions, Cd receiver

• Изображение
• Текст

ENGLISH

РУCCKИЙ

CD RECEIVER

РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ

KD-G227

For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

GET0341-001A

[EE]

For canceling the display demonstration, see page 5.
Информацию об отмене демонстрации функций дисплея см. на стр. 5.

В соответствии с Законом Российской Федерации “О защите прав потре бителей” срок службы

(годности) данного товара “по истечении которого он может представлять опасность для жизни,
здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)
лет со дня производства. Этот срок является временем, в течение которого потребитель данного
товара может безопасно им пользоваться при условии соблюдения ин струк ции по эксплуатации
данного товара, проводя необходимое обслуживание, включающее замену расходных материалов
и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляе мые вместе с ним, могут

храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных космети ческих материалов,

упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в
частности, гарантийного свидетельства JVC, которое он может получить в соответствии с законом о
правах потребителя или других законов, связанных с ним.

Cover_KD-G227[EE]f.indd 2

Cover_KD-G227[EE]f.indd 2

10/21/05 12:35:53 PM

10/21/05 12:35:53 PM

English, How to detach/attach the control panel, How to reset your unit

How to forcibly eject a disc

• Изображение
• Текст

2

ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

How to detach/attach the control

panel

Detaching…

Attaching…

Warning:

If you need to operate the unit while driving,
be sure to look ahead carefully or you may be
involved in a traffic accident.

Caution on volume setting:

Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.

How to reset your unit

• Your preset adjustments will also be erased.
• If a disc is loaded, it will eject. Be careful not to

drop the disc.

How to forcibly eject a disc

• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.

EN02-05_KD-G227[EE]f.indd 2

EN02-05_KD-G227[EE]f.indd 2

10/21/05 12:37:22 PM

10/21/05 12:37:22 PM

ENGLISH

3

How to read this manual

• Button operations are mainly explained with

the illustrations in the table below.

•

is used to indicate an indicator is

displayed for the corresponding operation.

• Some related tips and notes are explained in

“More about this unit” (see pages 14 and 15).

Press briefly.

Press repeatedly.

Press either
one.

Press and hold until your
desired response begins.

Press and hold both
buttons at the same time.

How to use the M MODE button

If you press M MODE, the unit goes into
functions mode, then the number buttons
and

¢/4 buttons work as different

function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their original
functions again after pressing M MODE, wait
for 5 seconds without pressing any of these
buttons until the functions mode is cleared or
press M MODE again.

CONTENTS

Control panel —

KD-G227

………………… 4

Getting started …………………………… 5

Basic operations ……………………………………………. 5

Radio operations ………………………… 6

Disc operations …………………………… 7

Playing a disc in the unit ……………………………….. 7

Sound adjustments ……………………… 9

General settings — PSM ………………. 10

Remote Controller —

RM-RK60

…………. 12

Maintenance ……………………………… 13

More about this unit ……………………. 14

Troubleshooting …………………………. 16

Specifications …………………………….. 17

For safety…

• Do not raise the volume level too much, as

this will block outside sounds, making driving
dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car…

If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.

Time countdown indicator

EN02-05_KD-G227[EE]f.indd 3

EN02-05_KD-G227[EE]f.indd 3

10/21/05 12:37:25 PM

10/21/05 12:37:25 PM

4

ENGLISH

Control panel —

KD-G612/KD-G611/KD-G511

u RND (random) button
i M MODE button
o

(control panel release) button

Display window

; Disc information indicators—TAG (ID3

Tag),

(folder),

(track/file)

a Disc type indicators—WMA, MP3
s DISC indicator
d Playback mode / item indicators—

RND (random),

(disc),

(folder),

RPT (repeat)

f LOUD (loudness) indicator
g EQ (equalizer) indicator
h Sound mode (C-EQ: custom equalizer)

indicators—JAZZ, CLASSIC, HIP HOP,
POPS, ROCK, USER

j Tr (track) indicator
k Source display / Volume level indicator /

Time countdown indicator

l Main display
/ Tuner reception indicators—ST (stereo),

MO (monaural)

Parts identification

Display window

Control panel —

KD-G227

1

(standby/on/attenuator) button

2 SOURCE button
3 BAND button
4 Remote sensor

• You can control this unit with an
optionally purchased remote controller.
For details, see page 12.

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial
lighting).

5 Loading slot
6 Display window
7

0 (eject) button

8 EQ (equalizer) button
9

¢/4 buttons

p Control dial
q SEL (select) button
w DISP (display) button
e MO (monaural) button
r SSM (Strong-station Sequential Memory)

button

t Number buttons
y RPT (repeat) button

EN02-05_KD-G227[EE]f.indd 4

EN02-05_KD-G227[EE]f.indd 4

10/21/05 12:37:26 PM

10/21/05 12:37:26 PM

ENGLISH

5

Basic settings

• See also “General settings — PSM” on pages

10 and 11.

1

2

1 Canceling the display

demonstrations

Select “DEMO,” then “DEMO OFF.”

2 Setting the clock

Select “CLOCK H” (hour), then adjust
the hour.
Select “CLOCK M” (minute), then
adjust the minute.

3

Finish the procedure.

To check the current clock time while…

The power is turned off

Listening to the radio

Frequency

Ô Clock

Getting started

Basic operations

~

Turn on the power.

Ÿ

* You cannot select “DISC” as the

playback source if there is no disc in
the unit.

!

For FM/AM tuner

⁄

Adjust the volume.

Volume level appears.

Volume level indicator

@

Adjust the sound as you want. (See

pages 9 and 10.)

To drop the volume in a
moment (ATT)

To restore the sound, press
it again.

To turn off the power

EN02-05_KD-G227[EE]f.indd 5

EN02-05_KD-G227[EE]f.indd 5

10/21/05 12:37:27 PM

10/21/05 12:37:27 PM

6

ENGLISH

When an FM stereo broadcast is hard to
receive

Lights up when monaural mode is activated.

Reception improves, but stereo effect will be
lost.

To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO
indicator goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential
Memory)

1

Select the FM band (FM1 – FM3) you

want to store into.

2

3

“SSM” flashes, then disappears when
automatic presetting is over.

Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.

Radio operations

~

Ÿ

Lights up when receiving an FM stereo
broadcast with sufficient signal strength.

Selected band appears.

!

Start searching for a station.

When a station is received,
searching stops.
To stop searching, press the
same button again.

To tune in to a station manually

In step ! above…
1

2 Select the desired station frequencies.

EN06-11_KD-G227[EE]f.indd 6

EN06-11_KD-G227[EE]f.indd 6

10/21/05 12:40:41 PM

10/21/05 12:40:41 PM

7

ENGLISH

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset

number 4 of the FM1 band.

1

2

3

Preset number flashes for a while.

Listening to a preset station

1

2

Select the preset station (1 – 6) you

want.

To be continued…

Disc operations

Playing a disc in the unit

All tracks will be played repeatedly until you
change the source or eject the disc.

To stop play and eject
the disc

To fast-forward or
reverse the track

To go to the next or
previous tracks

To go to the next or previous folders (only
for MP3 or WMA discs)

EN06-11_KD-G227[EE]f.indd 7

EN06-11_KD-G227[EE]f.indd 7

10/21/05 12:40:44 PM

10/21/05 12:40:44 PM

English, Changing the display information, Prohibiting disc ejection

Страница 8

• Изображение
• Текст

8

ENGLISH

To locate a particular track (for CD) or folder
(for MP3 or WMA discs) directly

To select a number from 01 – 06:

To select a number from 07 – 12:

• To use direct folder access on MP3/WMA

discs, it is required that folders are assigned
with 2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.

To select a particular track in

a folder (for MP3 or WMA
disc):

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same
procedure.

Changing the display information

While playing an audio CD or a CD Text

While playing an MP3 or a WMA disc

• When “TAG DISP” is set to “TAG ON”

(see page 11)

• When “TAG DISP” is set to “TAG OFF”

: Elapsed playing time with the current

track number

: Clock with the current track number

*

1

If the current disc is an audio CD,

“NO NAME” appears.

*

2

If an MP3/WMA file does not have ID3 tags,

folder name and file name appear. In this
case, the TAG indicator will not light up.

EN06-11_KD-G227[EE]f.indd 8

EN06-11_KD-G227[EE]f.indd 8

10/23/05 10:10:27 AM

10/23/05 10:10:27 AM

Sound adjustments, English selecting the playback modes

Страница 9

• Изображение
• Текст

9

ENGLISH

Selecting the playback modes

You can use only one of the following playback
modes at a time.

1

2

Select your desired playback mode.

7 Repeat play

Mode

Plays repeatedly

TRK RPT

: The current track.

FLDR RPT*

3

: All tracks of the current

folder.

RPT OFF

: Cancels.

7 Random play

Mode

Plays at random

FLDR RND*

3

: All tracks of the current

folder, then tracks of the next
folder and so on.

DISC RND : All tracks of the current disc.

RND OFF

: Cancels.

*

3

Only while playing an MP3 or a WMA

disc.

Sound adjustments

You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).

Indication (For)

BAS

TRE

LOUD

(bass)

(treble) (loudness)

USER
(Flat sound)

00

00

OFF

ROCK
(Rock or disco music)

+03

+01

ON

CLASSIC
(Classical music)

+01

–02

OFF

POPS
(Light music)

+04

+01

OFF

HIP HOP
(Funk or rap music)

+02

00

ON

JAZZ
(Jazz music)

+02

+03

OFF

Preset values

Ex.: When “ROCK” is selected

To be continued…

EN06-11_KD-G227[EE]f.indd 9

EN06-11_KD-G227[EE]f.indd 9

10/21/05 12:40:45 PM

10/21/05 12:40:45 PM

10

ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your
preference.

1

2

Indication, [Range]

BAS*

1

(bass), [–06 to +06]

Adjust the bass.

TRE*

1

(treble), [–06 to +06]

Adjust the treble.

FAD*

2

(fader), [R06 to F06]

Adjust the front and rear speaker balance.

BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.

LOUD*

1

(loudness), [LOUD ON or LOUD OFF]

Boost low and high frequencies to produce a
well-balanced sound at low volume level.

VOL (volume), [00 to 30 or 50*

3

]

Adjust the volume.

*

1

When you adjust the bass, treble, or loudness,

the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”

*

2

If you are using a two-speaker system, set the

fader level to “00.”

*

3

Depending on the amplifier gain control

setting. (See page 11 for details.)

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.

1

2

Select a PSM item.

3

Adjust the PSM item selected.

4

Repeat steps

2

and

3

to adjust other

PSM items if necessary.

5

Finish the procedure.

General settings — PSM

EN06-11_KD-G227[EE]f.indd 10

EN06-11_KD-G227[EE]f.indd 10

10/21/05 12:40:46 PM

10/21/05 12:40:46 PM

Комментарии

• « Назад

  Ctrl + ←

• Вперёд »

  Ctrl + →

Мануал подходит для устройств

• JVC KD-G227