Motorola радиотелефон dect motorola c1001lb инструкция на русском

Digital Cordless Telephone

Motorola C1LB+

For C1001LB+, C1002LB+, C1003LB+ and C1004LB+

Warning: Charge the handset for 24 hours before use.

1. Getting started

IMPORTANT

Do not place your C1LB+ in the bathroom or other humid areas.

Location

You need to place your C1LB+ base within 1.5 metres of the mains power and telephone wall

socket so that the cables will reach. The socket-outlet should be installed near the equipment and

should be easily accessible.

Make sure that it is at least 1 metre away from other electrical appliances to avoid interference.

Your C1LB+ works by sending radio signals between the handset and base. The strength of the

signal depends on where you place the base. Placing it as high as possible ensures the best

signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoors when there is a clear line of sight between

the base and handset. Any obstruction between the base and handset will reduce the range

significantly. With the base indoors and the handset either indoors or outdoors, the range will

normally be up to 50 metres. Thick concrete and stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates that you are within range of the base. When out of range

of the base, the

icon flashes. If you are on a call, you will hear a warning beep.

The line will hang up if the handset moves out of range of the base. Move closer to the base. The

handset will automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do not connect the

telephone line cord into the wall socket until the handset is fully charged. Use only the power

adaptor and telephone line cord supplied with the product.

Connecting the base

1. Plug the telephone line cord into the socket marked

on the underside of the base.

2. Plug the power adaptor into the socket marked

on the underside of the base and plug the

other end into the mains power wall socket. Switch on the mains power.

Handset LCD Display

Battery

Eco mode

status

Circle around

Scrolls

appears when

when

Eco mode is ON

charging

Time or Handset name

In standby mode, press and hold to switch handset

0

idle screen between handset name or time.

Flashes to indicate an incoming external call.

External call in progress.

Flashes to indicate an incoming internal call.

Internal call in progress.

3-way call in progress or transfer an external call to another C1LB+ handset registered to the

base.

Eco mode is ON.

Flashes to indicate new voicemail messages received. Off when you have no voicemail

messages.

1

Indicates signal strength.

Flashes when handset is not registered to the base or if you go out of range.

Hands-free mode is ON.

Menu is opened.

Phonebook is opened.

Flashes to indicate new calls list entries received.

2

Answered call (when viewing the Calls list).

2

Unanswered call (when viewing the Calls list).

2

Keypad is locked.

Displayed number is longer than 12 digits.

The approximate power levels of your battery are indicated as follows:

Battery is fully charged.

Battery is partially charged.

Battery is running low.

#

2. When the other handset answers, press

to connect all three callers to begin the

conference call.

icon is displayed.

I

3. If there is no answer from the other handset, press

to return to your external caller.

n

4. Press

to end the call.

3.6

Hands-free speakerphone

Hands-free lets you talk to your caller without holding the handset. It also enables other people in

the room to listen to the conversation over the loudspeaker.

3.6.1

Make a hands-free call

t

1. Dial the number and then press

twice.

icon is displayed and you will hear the call over the handset loudspeaker.

t

2. Press

to switch the call between the earpiece and the loudspeaker.

n

3. Press

to end the call.

NOTE

u

d

During a hands-free call, press

or

to adjust the volume.

3.6.2

Answer a call hands-free

If the handset is on the base and auto answer is switched on, lift the handset and press

t

If the handset is off the base or auto answer is switched off, press

twice to answer the call.

3.6.3

Switch to hands-free during a call

t

During a call, press

to put the call on the loudspeaker.

t

To switch hands-free off and return the call to the earpiece, press

again.

3.7

Redial

The last 10 entries dialled are stored in the redial list.

3.7.1

View or dial an entry

r

1. Press

to open the Redial list.

u

d

2. Scroll

or

to the entry you want.

t

n

3. Press

to dial the displayed entry or press

to return to standby.

NOTE

m

If the caller’s number exactly matches an entry stored in the phonebook, the name is displayed.

Press

to see the caller’s number.

3.7.2

Copy a Redial list number to the phonebook

r

1. Press

to open the Redial list.

u

d

2. Scroll

or

to the entry you want.

Manufactured, distributed or sold by Suncorp Technologies Ltd., official licensee

for this product. MOTOROLA and the Stylized M Logo are trademarks or registered

trademarks of Motorola Trademark Holdings, LLC. and are used under license. All

other trademarks are the property of their respective owners. © 2014 Motorola

Mobility LLC. All rights reserved.

Version 4 (SG)

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH

battery cells supplied. Please note the ‘+’ and ‘-‘ markings inside the battery compartment

and insert in the correct direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the first time, place the handset on the base to charge for

at least 24 hours continuously.

4. When the handset is fully charged,

icon will appear steady on the display. Plug the other

end of the telephone line cord (make sure that one end is already plugged into the base) into

the telephone wall socket.

Connecting the handset and charger

(for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the handsets

and chargers.

1. Plug the power adaptor into the socket marked

on the underside of the charger and plug

the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the 2 x AAA NiMH

rechargeable batteries supplied. Please note the ‘+’ and ‘-‘ markings inside the battery

compartment and insert in the correct direction.

3. Slide the battery cover back into place.

If you are charging the batteries for the first time, place the handset on the charger to charge for

at least 24 hours continuously.

4. When the handset is fully charged,

icon will appear steady on the display. The display will

show

HANDSET

and handset number (e.g. 2) to indicate that it is registered to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 300mA

rechargeable batteries) supplied with your C1LB+.

Please do not use alkaline or non rechargeable batteries. It may cause permanent damage to

the product and void the warranty.

BATTERY LOW WARNING

If

icon flashes on the display and you hear a warning beep every minute during a call, you

will need to recharge the handset before you can use it again.

When charging,

icon will scroll on the display. Once fully charged scrolling will stop.

Flashes when battery is almost fully discharged.

1

This feature is dependent on your Network Service provider supporting the service. A

subscription fee may be payable.

2

For this feature to work, you must subscribe to Caller ID Service from your network operator. A

subscription fee may be payable.

Underside of the base

A Page

In standby mode, press to ring the handset(s).

Press and hold to enter registration mode when registering handsets.

Navigating the menus

Your C1LB+ has an easy to use menu system.

Each menu has a list of options, which you can see on the menu map on the following page.

When the handset is switched on and in standby:

m

1. Press

to open the main menu.

u

d

2. Then use

or

buttons to scroll through the available options.

m

3. Press

to select an option. To return to the previous menu level, press

n

menu and return to standby, press

.

NOTE

If no buttons are pressed for 20 seconds, the handset returns to standby automatically.

m

3. Press

. The display shows

ADD

?.

m

4. Press

again. The display shows

NAME

?.

m

5. Enter the name and press

. The number is displayed.

m

6. Edit the number if necessary, then press

.

u

d

7. Press

or

to select the ringer melody you want and press

The number is stored.

3.7.3

Delete an entry

r

1. Press

to open the Redial list.

p

u

d

2. Scroll

or

to the entry you want and press

. The display shows

m

p

3. Press

to confirm or

to cancel.

3.74

Delete the entire Redial list

r

1. Press

to open the Redial list.

p

2. Press and hold

. The display shows

DELETE ALL

?.

m

3. Press

to confirm or to cancel.

3.8

Lock / unlock the keypad

t

.

You can lock the keypad so that it cannot be operated accidentally while carrying it around.

NOTE

When the keypad is locked, you can still answer incoming calls and operate the handset as

normal during the call. When the call ends, the keypad lock comes on again.

*

1. Press and hold

.

icon is displayed.

2. To unlock the keypad, press any key on your handset. The display shows

*

3. Press

within 5 seconds.

3.9

Paging / Find handset

You can alert a handset user that they are wanted or locate a missing handset.

Paging calls cannot be answered by a handset.

1. Press

on the base. All handsets registered to the base will ring.

2. To stop the ringing, press

on the base again or press any button on the handset.

4. Phonebook

You can store up to 50 names and numbers in the phonebook. Names can be up to 12 characters

long and numbers up to 24 digits. You can also select different ringer melodies for the phonebook

entries.

Welcome…

to your new Motorola C1LB+ Digital Cordless Telephone!

•

All handsets are fully cordless for locating anywhere within range.

•

50 Name and Number phonebook.

•

Bright backlit display.

•

Speakerphone for hands-free conversations.

•

Caller ID shows you who’s calling and see details of the last 40 callers in a Calls list.

•

Redial up to 10 of the last numbers called.

•

Register up to 5 handsets to a single base and register each handset with up to 4 different

bases.

•

Make internal calls and transfer external calls between handsets.

•

Choose from 10 different ringtones for internal and external calls as well as numbers stored in

the phonebook.

Please note that this equipment is not designed for making emergency telephone calls when

the power fails. Alternative arrangements should be made for access to emergency services.

Need help?

If you have any problems setting up or using your C1LB+, please contact Customer Services

on (65) 68412668. Email: support@alcom.com.sg.

Alternatively, you may find the answer in the ‘Help’ section at the back of this guide.

1

You must subscribe to your network provider’s Caller ID or Call Waiting service for these

features to work. A subscription fee may be payable.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 6.5 hours talk time or up to 135 hours

standby time on a single charge.

1

Note that new batteries do not reach their full capacity until they have been put to normal use for

several days.

To keep your batteries in the best condition, leave the handset off the base for a few hours at a

time.

Running the batteries right down at least once a week will help them last as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the

handset less talk / standby time. Eventually they will need to be replaced.

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day.

Batteries and handset may become warm during charging. This is normal.

All talk and standby times are approximate and depend on features selected and usage

1

pattern.

Date and time

If you have subscribed to a Caller ID Service, the date and time is set automatically for all handsets

when you receive your first call.

If you do not have a Caller ID service, you can set the date and time manually, see section «7.

Clock & Alarm».

Your C1LB+ is now ready for use.

Menu map

PHONEBOOK

HANDSET

ADD ENTRY

BEEP

MODIFY ENTRY

INT RING VOL

DELETE ENTRY

EXT RING VOL

SETUP

INT MELODY

DEL HANDSET

EXT MELODY

PIN CODE

AUTO ANSWER

DIAL MODE

NAME

A

RECALL

LANGUAGE

DEFAULT

KEYLOCK ?

ECO MODE

3. Using the phone

NOTE

Your handset will automatically time the duration of all external calls. The call timer will display

after the first 15 seconds of your call. When the call ends, the total duration of your talk time is

shown for 5 seconds.

3.1

Switch the handset on / off

n

Press and hold

to switch the handset on or off.

3.2

Calls

3.2.1

Make a call

t

1. Press

.

2. When you hear the dial tone, dial the number.

3.2.2

Preparatory dialling

1. Dial the number first. If you make a mistake press

t

2. Press

to dial.

p

3.2.3

End a call

n

. To exit the

Press

, or place the handset back on the base or charger.

3.2.4

Receive a call

When you receive an external call, the phone rings and

1. If the handset is off the base then press

simply lift the handset to answer the call.

4.1

Store a name and number

If the C1LB+ is connected to a switchboard, you may need to enter a pause in a stored number.

This gives the switchboard time to find an outside line.

A pause is normally stored after the switchboard access code (e.g. 9).

When storing a number, press and hold

m

storing the phone number.

.

If you have subscribed to Caller ID Service and wish to display the name of your caller instead of

the number, save the full telephone number including the area code to your phonebook.

You can store multiple entries with the same number. However, to prevent unnecessary

duplicated entries, you can only store the same name once.

m

DELETE

?.

1. Press

. The display shows PHONEBOOK.

m

2. Press

. The display shows

ADD

m

3. Press

. The display shows

NAME

m

4. Enter the name and press

. The display shows

m

5. Enter the number and press

. The display shows

u

d

6. Press

or

to select the ringer melody you want and press

The display shows

ADD

ENTRY.

p

7. Enter the next name and number entry that you wish to store in your phonebook or press

twice to return to standby.

ENTERING NAMES

8

Use the keypad letters to enter names, e.g. to store TOM:

Press

once to enter T.

6

Press

three times to enter O.

6

PRESS

*.

Press

once to enter M.

p

WRITING TIPS

Press

to delete the last character or digit.

u

d

Press

or

to move between characters.

1

Press

to insert a space.

1

Use

twice to insert a dash.

4.2

View or dial an entry

p

1. Press

.

icon is displayed.

u

d

2. Scroll

or

to the entry you want.

OR

This user guide provides you with all the information you need to get

the most from your phone.

To set up your phone, follow the simple instructions in ‘Getting

Started’, on the next few pages.

IMPORTANT

Only use the telephone line cord supplied.

Got everything?

•

C1LB+ base & cordless handset

1

•

2 x rechargeable Ni-MH battery cells

•

Power adaptor for the base

•

Telephone line cord

If you have purchased a C1LB+ multiple pack you will also have the following additional

items:

•

Cordless handset & charger

•

2 x rechargeable Ni-MH battery cells

•

Power adaptor for the charger

ECOMOTO: a convergence of efforts by marketing, design, research, engineering and

supply chain management that leads to better products for everyone. A holistic view that

focuses on both social and environmental responsibility. A passion and a shared point of view.

The right thing to do.

•

Meets and / or exceeds EMEA environmental regulatory requirements.

•

Eco friendly packaging with a minimum 20% post consumer recycled content.

•

Phone housing is built with a minimum of 25% post consumer recycled content plastic.

•

Energy efficient charger that meets EU Code of Conduct requirements.

•

ECO mode function which reduces the transmitted power and energy consumption.

2. Getting to know your phone

Overview of your handset

Up

During a call, press to increase

earpiece volume.

When the phone is ringing,

press to increase the handset

ringer volume.

Press to scroll through the

menu options, redial list, calls

list and phonebook entries.

Menu / OK / Mute

Press to open the Menu.

Press to select menu

options and to con rm a

displayed option.

During a call, press to turn

mute on / o .

Talk / Hands-free

Press to make and receive

calls.

Press to switch hands-free

on or o during a call.

Keypad lock / * / Switch

from Pulse to Tone

Press and hold to lock the

keypad.

To unlock, press any key

and follow the on screen

instructions.

Dial a *.

During a call, press and

hold to switch from pulse

dialling to

tone dialling.

Recall

Use with switchboard / PABX

services and some network services.

When on an external call, press

Recall to get a fresh dialling tone or

to access call waiting when you hear

the signal. Press the key again to

toggle between your two callers.

NOTE

If you prefer to press

DATE — TIME

Auto answer off.

DATE SET

3.3

Adjust the earpiece volume

CLOCK SET

During a call, press

ALARM SET

from.

REGISTER

3.4

Mute

SELECT BASE

You can mute your handset so that you can talk to someone nearby without your caller hearing.

REG BASE

1. During a call, press

m

2. Press

3.5

Intercom

3.5.1

Make an internal call

If you have more than one handset registered to the base, you can make internal calls between

two handsets.

icon is displayed to indicate an internal call.

I

1. Press

3.5.2

Receive an internal call

When you receive an internal call,

displayed.

t

1. Press

3.5.3

Transfer a call

You can transfer an external call to another handset registered to the base.

During an external call:

I

1. Press

p

2. When the other handset answers, press

to delete the last digit.

NOTE

If there is no answer from the other handset and you wish to return to your external caller,

I

press

.

Your external call resumes automatically after 30 seconds if there is no answer.

3.5.4

3-way conference call

icon flashes on the display.

t

You can hold a 3-way conference call between 2 internal callers and 1 external caller.

to answer the call, or if the handset is on the base

During a call with an external caller:

1. Press followed by the handset number (1-5) that you want to establish a conference call.

Enter the first letter of the name to search alphabetically.

The first name that starts with this letter or the nearest letter in the alphabet will be displayed.

u

Scroll

or

t

#

3. Press

until the display shows P. You can then continue

NOTE

When the name is displayed, you can switch between the name and number by pressing

4.3

Edit a name and number

m

1. Press

m

2. Press

d

3. Scroll

ENTRY.

u

4. Scroll

or

?.

existing name is displayed.

p

NUMBER

?.

5. Press

existing number is displayed.

MELODY

1.

p

m

6. Press

.

u

7. Scroll

or

8. Enter the next name and number entry you wish to store in your phonebook or press

twice to return to standby.

4.4

Delete an entry

m

1. Press

m

2. Press

d

3. Scroll

u

4. Scroll

or

display shows

m

5. Press

5. Handset settings

5.1

Handset ringer volume

You can adjust the ringer volume and set different volume levels for your internal and external

calls. Choose from 5 volume levels or Off.

m

1. Press

u

2. Press

or

u

3. Press

or

Display

Earpiece

Calls list / Down

In standby mode, press to open

the calls list.

During a call, press to decrease

earpiece volume.

When the phone is ringing, press

to decrease the handset ringer

volume.

Press to scroll through the menu

options, redial list, calls list and

phonebook entries.

Phonebook / Delete / Back

In standby mode, press to open

the phonebook menu.

In editing mode, press to delete

characters and digits.

Go back to the previous menu

level.

End Call / Exit / Switch Handset

on / o

Press to end a call.

When viewing the redial / calls

list / phonebook or when in the

menu, press to exit and return to

standby.

Press and hold for 3 seconds to

switch the handset on / o .

Pause / #

Press and hold to enter a

pause (P) when pre-dialling

or storing numbers.

Dial a #.

Microphone

Intercom

Redial

Used to make internal calls

In standby mode,

and transfer calls to other

press to open the

C1LB+ handsets registered

redial list.

to the base.

t

when you lift up the handset to answer a call, you will need to switch

u

d

or

to increase or decrease the volume. There are 5 levels to choose

m

. The display shows

MUTE

and your caller cannot hear you.

again to resume your call.

followed by the number (1-5) of the handset you want to call.

icon flashes and the handset number that is calling you is

to answer the call.

followed by the handset number (1-5) that you want to transfer to.

n

to complete the transfer.

d

to the entry you want.

n

to dial or

to return to standby.

m

. The display shows PHONEBOOK.

. The display shows

ADD

ENTRY.

m

to

MODIFY ENTRY

and press

.

m

d

to the entry you want to edit, or search alphabetically and press

. The

m

to delete the name if required, then enter the new name and press

. The

m

to delete the number if required, then enter the new number and press

.

m

d

to select a new ringer melody and press

. The display shows

ADD

ENTRY.

p

. The display shows PHONEBOOK.

. The display shows

ADD

ENTRY.

m

to

DELETE ENTRY

and press

.

m

d

to the entry you want to delete, or search alphabetically and press

. The

CONFIRM

?.

p

to confirm or

to cancel.

m

d

, scroll

to

HANDSET

and press

.

m

d

to select

INT RING VOL

or

EXT RING VOL

and press

.

d

to select the volume (1 -5 or OFF) .

.

Manufactured, distributed or sold by Suncorp Technologies Ltd., oicial licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2014 Motorola Mobility LLC. All rights reserved.Version 4 (SG)

Welcome…

to your new Motorola C1LB+ Digital Cordless Telephone!

• All handsets are fully cordless for locating anywhere within range.

• 50 Name and Number phonebook.

• Bright backlit display.

• Speakerphone for hands-free conversations.

• Caller ID shows you who’s calling and see details of the last 40 callers in a Calls list.

1

• Redial up to 10 of the last numbers called.

• Register up to 5 handsets to a single base and register each handset with up to 4 dierent

bases.

• Make internal calls and transfer external calls between handsets.

• Choose from 10 dierent ringtones for internal and external calls as well as numbers stored in

the phonebook.

Please note that this equipment is not designed for making emergency telephone calls when

the power fails. Alternative arrangements should be made for access to emergency services.

Need help?

If you have any problems setting up or using your C1LB+, please contact Customer Services

on (65) 68412668. Email: support@alcom.com.sg.

Alternatively, you may nd the answer in the ‘Help’ section at the back of this guide.

1

You must subscribe to your network provider’s Caller ID or Call Waiting service for these

features to work. A subscription fee may be payable.

This user guide provides you with all the information you need to get

the most from your phone.

To set up your phone, follow the simple instructions in ‘Getting

Started’, on the next few pages.

IMPORTANT

Only use the telephone line cord supplied.

Got everything?

• C1LB+ base & cordless handset

• 2 x rechargeable Ni-MH battery cells

• Power adaptor for the base

• Telephone line cord

If you have purchased a C1LB+ multiple pack you will also have the following additional

items:

• Cordless handset & charger

• 2 x rechargeable Ni-MH battery cells

• Power adaptor for the charger

ECOMOTO: a convergence of eorts by marketing, design, research, engineering and

supply chain management that leads to better products for everyone. A holistic view that

focuses on both social and environmental responsibility. A passion and a shared point of view.

The right thing to do.

• Meets and / or exceeds EMEA environmental regulatory requirements.

• Eco friendly packaging with a minimum 20% post consumer recycled content.

• Phone housing is built with a minimum of 25% post consumer recycled content plastic.

• Energy eicient charger that meets EU Code of Conduct requirements.

• ECO mode function which reduces the transmitted power and energy consumption.

2. Getting to know your phone

Overview of your handset

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 6.5 hours talk time or up to 135 hours

standby time on a single charge.

1

Note that new batteries do not reach their full capacity until they have been put to normal use for

several days.

To keep your batteries in the best condition, leave the handset o the base for a few hours at a

time.

Running the batteries right down at least once a week will help them last as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the

handset less talk / standby time. Eventually they will need to be replaced.

After charging your handset for the rst time, subsequent charging time is about 6–8 hours a day.

Batteries and handset may become warm during charging. This is normal.

1

All talk and standby times are approximate and depend on features selected and usage

pattern.

Date and time

If you have subscribed to a Caller ID Service, the date and time is set automatically for all handsets

when you receive your rst call.

If you do not have a Caller ID service, you can set the date and time manually, see section “7.

Clock & Alarm”.

Your C1LB+ is now ready for use.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH

battery cells supplied. Please note the ’+’ and ’-’ markings inside the battery compartment

and insert in the correct direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the rst time, place the handset on the base to charge for

at least 24 hours continuously.

4. When the handset is fully charged,

icon will appear steady on the display. Plug the other

end of the telephone line cord (make sure that one end is already plugged into the base) into

the telephone wall socket.

Connecting the handset and charger

(for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the handsets

and chargers.

1. Plug the power adaptor into the socket marked

on the underside of the charger and plug

the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the 2 x AAA NiMH

rechargeable batteries supplied. Please note the ’+’ and ’-’ markings inside the battery

compartment and insert in the correct direction.

3. Slide the battery cover back into place.

If you are charging the batteries for the rst time, place the handset on the charger to charge for

at least 24 hours continuously.

4. When the handset is fully charged,

icon will appear steady on the display. The display will

show

HANDSET

and handset number (e.g. 2) to indicate that it is registered to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 300mA

rechargeable batteries) supplied with your C1LB+.

Please do not use alkaline or non rechargeable batteries. It may cause permanent damage to

the product and void the warranty.

BATTERY LOW WARNING

If

icon flashes on the display and you hear a warning beep every minute during a call, you

will need to recharge the handset before you can use it again.

When charging,

icon will scroll on the display. Once fully charged scrolling will stop.

1. Getting started

IMPORTANT

Do not place your C1LB+ in the bathroom or other humid areas.

Location

You need to place your C1LB+ base within 1.5 metres of the mains power and telephone wall

socket so that the cables will reach. The socket-outlet should be installed near the equipment and

should be easily accessible.

Make sure that it is at least 1 metre away from other electrical appliances to avoid interference.

Your C1LB+ works by sending radio signals between the handset and base. The strength of the

signal depends on where you place the base. Placing it as high as possible ensures the best

signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoors when there is a clear line of sight between

the base and handset. Any obstruction between the base and handset will reduce the range

signicantly. With the base indoors and the handset either indoors or outdoors, the range will

normally be up to 50 metres. Thick concrete and stone walls can severely aect the range.

SIGNAL STRENGTH

The

icon on your handset indicates that you are within range of the base. When out of range

of the base, the

icon flashes. If you are on a call, you will hear a warning beep.

The line will hang up if the handset moves out of range of the base. Move closer to the base. The

handset will automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do not connect the

telephone line cord into the wall socket until the handset is fully charged. Use only the power

adaptor and telephone line cord supplied with the product.

Connecting the base

1. Plug the telephone line cord into the socket marked on the underside of the base.

2. Plug the power adaptor into the socket marked

on the underside of the base and plug the

other end into the mains power wall socket. Switch on the mains power.

Handset LCD Display

Flashes to indicate an incoming external call.

External call in progress.

Flashes to indicate an incoming internal call.

Internal call in progress.

3-way call in progress or transfer an external call to another C1LB+ handset registered to the

base.

Eco mode is ON.

Flashes to indicate new voicemail messages received. O when you have no voicemail

messages.

1

Indicates signal strength.

Flashes when handset is not registered to the base or if you go out of range.

Hands-free mode is ON.

Menu is opened.

Phonebook is opened.

Flashes to indicate new calls list entries received.

2

Answered call (when viewing the Calls list).

2

Unanswered call (when viewing the Calls list).

2

Keypad is locked.

Displayed number is longer than 12 digits.

The approximate power levels of your battery are indicated as follows:

Battery is fully charged.

Battery is partially charged.

Battery is running low.

Flashes when battery is almost fully discharged.

1

This feature is dependent on your Network Service provider supporting the service. A

subscription fee may be payable.

2

For this feature to work, you must subscribe to Caller ID Service from your network operator. A

subscription fee may be payable.

Underside of the base

A

A Page

In standby mode, press to ring the handset(s).

Press and hold to enter registration mode when registering handsets.

Navigating the menus

Your C1LB+ has an easy to use menu system.

Each menu has a list of options, which you can see on the menu map on the following page.

When the handset is switched on and in standby:

1. Press

m to open the main menu.

2. Then use

u or d buttons to scroll through the available options.

3. Press

m to select an option. To return to the previous menu level, press p . To exit the

menu and return to standby, press

n.

NOTE

If no buttons are pressed for 20 seconds, the handset returns to standby automatically.

Menu map

PHONEBOOK HANDSET DATE — TIME

ADD ENTRY BEEP DATE SET

MODIFY ENTRY INT RING VOL CLOCK SET

DELETE ENTRY EXT RING VOL ALARM SET

SETUP INT MELODY REGISTER

DEL HANDSET EXT MELODY SELECT BASE

PIN CODE AUTO ANSWER REG BASE

DIAL MODE NAME

RECALL LANGUAGE

DEFAULT KEYLOCK ?

ECO MODE

3. Using the phone

NOTE

Your handset will automatically time the duration of all external calls. The call timer will display

after the rst 15 seconds of your call. When the call ends, the total duration of your talk time is

shown for 5 seconds.

3.1 Switch the handset on / o

Press and hold n to switch the handset on or o.

3.2 Calls

3.2.1 Make a call

1. Press

t.

2. When you hear the dial tone, dial the number.

3.2.2 Preparatory dialling

1. Dial the number rst. If you make a mistake press

p to delete the last digit.

2. Press

t to dial.

3.2.3 End a call

Press

n, or place the handset back on the base or charger.

3.2.4 Receive a call

When you receive an external call, the phone rings and icon flashes on the display.

1. If the handset is o the base then press

t to answer the call, or if the handset is on the base

simply lift the handset to answer the call.

NOTE

If you prefer to press

t when you lift up the handset to answer a call, you will need to switch

Auto answer o.

3.3 Adjust the earpiece volume

During a call, press u or d to increase or decrease the volume. There are 5 levels to choose

from.

3.4 Mute

You can mute your handset so that you can talk to someone nearby without your caller hearing.

1. During a call, press

m. The display shows

MUTE

and your caller cannot hear you.

2. Press

m again to resume your call.

3.5 Intercom

3.5.1 Make an internal call

If you have more than one handset registered to the base, you can make internal calls between

two handsets.

icon is displayed to indicate an internal call.

1. Press

I followed by the number (1-5) of the handset you want to call.

3.5.2 Receive an internal call

When you receive an internal call, icon flashes and the handset number that is calling you is

displayed.

1. Press

t to answer the call.

3.5.3 Transfer a call

You can transfer an external call to another handset registered to the base.

During an external call:

1. Press

I followed by the handset number (1-5) that you want to transfer to.

2. When the other handset answers, press

n to complete the transfer.

NOTE

If there is no answer from the other handset and you wish to return to your external caller,

press

I.

Your external call resumes automatically after 30 seconds if there is no answer.

3.5.4 3-way conference call

You can hold a 3-way conference call between 2 internal callers and 1 external caller.

During a call with an external caller:

1. Press followed by the handset number (1-5) that you want to establish a conference call.

Enter the rst letter of the name to search alphabetically.

The rst name that starts with this letter or the nearest letter in the alphabet will be displayed.

Scroll

u or d to the entry you want.

3. Press

t to dial or n to return to standby.

NOTE

When the name is displayed, you can switch between the name and number by pressing

m.

4.3 Edit a name and number

1. Press m. The display shows

PHONEBOOK

.

2. Press

m. The display shows

ADD ENTRY

.

3. Scroll

d to

MODIFY ENTRY

and press m.

4. Scroll

u or d to the entry you want to edit, or search alphabetically and press m. The

existing name is displayed.

5. Press

p to delete the name if required, then enter the new name and press m. The

existing number is displayed.

6. Press

p to delete the number if required, then enter the new number and press m.

7. Scroll

u or d to select a new ringer melody and press m. The display shows

ADD ENTRY

.

8. Enter the next name and number entry you wish to store in your phonebook or press

p

twice to return to standby.

4.4 Delete an entry

1. Press m. The display shows

PHONEBOOK

.

2. Press

m. The display shows

ADD ENTRY

.

3. Scroll

d to

DELETE ENTRY

and press m.

4. Scroll

u or d to the entry you want to delete, or search alphabetically and press m. The

display shows

CONFIRM ?

.

5. Press

m to conrm or p to cancel.

5. Handset settings

5.1 Handset ringer volume

You can adjust the ringer volume and set dierent volume levels for your internal and external

calls. Choose from 5 volume levels or O.

1. Press

m, scroll d to

HANDSET

and press m.

2. Press

u or d to select

INT RING VOL

or

EXT RING VOL

and press m.

3. Press

u or d to select the volume (1 -5 or OFF) .

4.1 Store a name and number

If the C1LB+ is connected to a switchboard, you may need to enter a pause in a stored number.

This gives the switchboard time to nd an outside line.

A pause is normally stored after the switchboard access code (e.g. 9).

When storing a number, press and hold

#

until the display shows P. You can then continue

storing the phone number.

If you have subscribed to Caller ID Service and wish to display the name of your caller instead of

the number, save the full telephone number including the area code to your phonebook.

You can store multiple entries with the same number. However, to prevent unnecessary

duplicated entries, you can only store the same name once.

1. Press

m. The display shows

PHONEBOOK

.

2. Press

m. The display shows

ADD ENTRY

.

3. Press

m. The display shows

NAME ?

.

4. Enter the name and press

m. The display shows

NUMBER ?

.

5. Enter the number and press

m. The display shows

MELODY 1

.

6. Press

u or d to select the ringer melody you want and press m.

The display shows

ADD ENTRY

.

7. Enter the next name and number entry that you wish to store in your phonebook or press

p twice to return to standby.

ENTERING NAMES

Use the keypad letters to enter names, e.g. to store TOM:

Press

8 once to enter T.

Press

6 three times to enter O.

Press

6 once to enter M.

WRITING TIPS

Press

p to delete the last character or digit.

Press

u or d to move between characters.

Press

1 to insert a space.

Use

1 twice to insert a dash.

4.2 View or dial an entry

1. Press p.

icon is displayed.

2. Scroll

u or d to the entry you want.

OR

3. Press

m. The display shows

ADD ?

.

4. Press

m again. The display shows

NAME ?

.

5. Enter the name and press

m. The number is displayed.

6. Edit the number if necessary, then press

m.

7. Press

u or d to select the ringer melody you want and press m.

The number is stored.

3.7.3 Delete an entry

1. Press

r to open the Redial list.

2. Scroll

u or d to the entry you want and press p. The display shows

DELETE ?

.

3. Press

m to conrm or p to cancel.

3.74 Delete the entire Redial list

1. Press

r to open the Redial list.

2. Press and hold

p. The display shows

DELETE ALL ?

.

3. Press

m to conrm or to cancel.

3.8 Lock / unlock the keypad

You can lock the keypad so that it cannot be operated accidentally while carrying it around.

NOTE

When the keypad is locked, you can still answer incoming calls and operate the handset as

normal during the call. When the call ends, the keypad lock comes on again.

1. Press and hold

*.

icon is displayed.

2. To unlock the keypad, press any key on your handset. The display shows

PRESS *

.

3. Press

* within 5 seconds.

3.9 Paging / Find handset

You can alert a handset user that they are wanted or locate a missing handset.

Paging calls cannot be answered by a handset.

1. Press

on the base. All handsets registered to the base will ring.

2. To stop the ringing, press

on the base again or press any button on the handset.

4. Phonebook

You can store up to 50 names and numbers in the phonebook. Names can be up to 12 characters

long and numbers up to 24 digits. You can also select dierent ringer melodies for the phonebook

entries.

2. When the other handset answers, press

# to connect all three callers to begin the

conference call.

icon is displayed.

3. If there is no answer from the other handset, press

I to return to your external caller.

4. Press

n to end the call.

3.6 Hands-free speakerphone

Hands-free lets you talk to your caller without holding the handset. It also enables other people in

the room to listen to the conversation over the loudspeaker.

3.6.1 Make a hands-free call

1. Dial the number and then press

t twice.

icon is displayed and you will hear the call over the handset loudspeaker.

2. Press

t to switch the call between the earpiece and the loudspeaker.

3. Press

n to end the call.

NOTE

During a hands-free call, press

u or d to adjust the volume.

3.6.2 Answer a call hands-free

If the handset is on the base and auto answer is switched on, lift the handset and press

t.

If the handset is o the base or auto answer is switched o, press

t twice to answer the call.

3.6.3 Switch to hands-free during a call

During a call, press

t to put the call on the loudspeaker.

To switch hands-free o and return the call to the earpiece, press

t again.

3.7 Redial

The last 10 entries dialled are stored in the redial list.

3.7.1 View or dial an entry

1. Press

r to open the Redial list.

2. Scroll

u or d to the entry you want.

3. Press

t to dial the displayed entry or press n to return to standby.

NOTE

If the caller’s number exactly matches an entry stored in the phonebook, the name is displayed.

Press

m to see the caller’s number.

3.7.2 Copy a Redial list number to the phonebook

1. Press

r to open the Redial list.

2. Scroll

u or d to the entry you want.

Warning: Charge the handset for 24 hours before use.

Motorola C1LB+

For C1001LB+, C1002LB+, C1003LB+ and C1004LB+

Digital Cordless Telephone

Earpiece

Display

Up

During a call, press to increase

earpiece volume.

When the phone is ringing,

press to increase the handset

ringer volume.

Press to scroll through the

menu options, redial list, calls

list and phonebook entries.

Menu / OK / Mute

Press to open the Menu.

Press to select menu

options and to conrm a

displayed option.

During a call, press to turn

mute on / o.

Talk / Hands-free

Press to make and receive

calls.

Press to switch hands-free

on or o during a call.

Keypad lock / * / Switch

from Pulse to Tone

Press and hold to lock the

keypad.

To unlock, press any key

and follow the on screen

instructions.

Dial a *.

During a call, press and

hold to switch from pulse

dialling to

tone dialling.

Recall

Use with switchboard / PABX

services and some network services.

When on an external call, press

Recall to get a fresh dialling tone or

to access call waiting when you hear

the signal. Press the key again to

toggle between your two callers.

Redial

In standby mode,

press to open the

redial list.

Phonebook / Delete / Back

In standby mode, press to open

the phonebook menu.

In editing mode, press to delete

characters and digits.

Go back to the previous menu

level.

Calls list / Down

In standby mode, press to open

the calls list.

During a call, press to decrease

earpiece volume.

When the phone is ringing, press

to decrease the handset ringer

volume.

Press to scroll through the menu

options, redial list, calls list and

phonebook entries.

End Call / Exit / Switch Handset

on / o

Press to end a call.

When viewing the redial / calls

list / phonebook or when in the

menu, press to exit and return to

standby.

Press and hold for 3 seconds to

switch the handset on / o.

Pause / #

Press and hold to enter a

pause (P) when pre-dialling

or storing numbers.

Dial a #.

Intercom

Used to make internal calls

and transfer calls to other

C1LB+ handsets registered

to the base.

Microphone

Battery statusScrolls when chargingTime or Handset nameIn standby mode, press and hold to switch handset

0

idle screen between handset name or time.Eco modeCircle around appears when Eco mode is ON

Смотреть руководство для Motorola C1001LB Plus ниже. Все руководства на ManualsCat.com могут просматриваться абсолютно бесплатно. Нажав кнопку «Выбор языка» вы можете изменить язык руководства, которое хотите просмотреть.

Бренд:

Motorola

Продукт:

Телефоны

Модель/название:

C1001LB Plus

Тип файла:

PDF

Доступные языки:

английский

Сопутствующие товары Motorola C1001LB Plus