Nmap termux руководство termux

In this post, You are gonna learn how you can install and use Nmap Tool In termux, And I am also gonna give you some Exmaple commands so you can try it your self. Overall it’s Gonna be a serious posts and if you wanna be a good hacker then you must know how to use Nmap.

What is Nmap in termux?

Nmap is an Open Source Network mapper that allows you to scan your network and collect Important data about the network as well as all the devices connected to it. For becoming a good hacker you must know how to collect data about any device and network and with the help of the Nmap tool you can get all that information in a few commands. To collect the data about the Device Nmap sends a packet and then analyses it to get the Information.

With the help of Nmap, you can use the Footprinting technique to gather a lot of information about the Victim networks as well as the system. You can Scan Networks and get information about all the Connected Devices to a particular system. You can scan all the open ports, You can even find the name of all the devices and these Open ports. 

If you want to Scan a Website and know it’s Open port then you can also do that with the help of the Nmap tool, you can find the IPs of the websites. If you wanna know more about Nmap then you can Visit There Offical Site @Nmap.org.

How to install Nmap in termux?

Step 1:

Step 2:

Nmap is just a basic Package in termux and you can install it like any other package so To install Nmap in Temux you just have to use the pkg command. Nmap is a small package so it won’t take a lot of data to download it. You can just paste the below command and it will be installed in no time.

pkg install nmap -y

 

Now if you see the $ sign on your Termux that means its Completely installed.

NOTE: This post is only for educational purposes. I and this site do not support any criminal activity. If you are doing any sort of misuse of this information This site is not responsible for that. THIS SITE ONLY SUPPORT ETHICAL HACKING. 

How to Use Nmap in Termux :

You can do many things with the help of the Nmap tool but in this post, I am gonna give few important commands that will give a brief idea of how you can use the Nmap tool in termux.

How to scan a Website with Nmap Termux :

To scan a Website you must have permissions Else it can cause you Trouble, Nmap allows you to Scan there Test website so, in this post, we will use that website, you just have to type Nmap and then the site name you can paste the below command in the termux to scan the Nmap test website.

nmap Scanme.nmap.org

Output :

You can see that we got an IP-Adress of the website in the second line as well as we can see the latency is 0.24 Seconds.and we can also see all the open port of the website.

Scan your Local Network with Nmap Termux :

If You just wanna scan your Local network (Your Intire subnet )and know How many devices are connected with your Wifi then you can use this command. This command will give you a list of all Devices in the network as well as you all the open ports of those devices.

nmap 192.168.1.1/24

 Output :

Now you can see in the below picture, I have 2 devices in my network. and you can also see all the open ports. The 192.168.1.202 Host is up and the latency is 0.0025s. If you have multiple devices on your network then it will show you a list of all the Devices.

Aggressive scan using Nmap Termux :

In the above Local Network scan, It won’t show you detailed information but if you want to see every possible detail then you can use -A argument in the command. I am just gonna use the above command with -A argument.

Scan a Single port in Nmap Termux :

If you just wanna scan a Single Port of a Particular Ip address then you can do that using the below command. Here I am scanning the entire network for the port 80 but you can put a single IP and it will work Perfectly. The advantage of scanning a single port is that it will save you some extra time especially when you are in a hurry.

NMAP (Network Mapper) is a free and open-source network scanning tool widely used by network administrators and cybersecurity professionals to discover and map devices on a network. It can scan a range of IP addresses or a single host to identify the services and operating systems running on it. In this article, we will discuss how to install and use NMAP in Termux.

Installing NMAP in Termux

1. Open Termux on your Android device and update the package repository by running the following command:

pkg update && pkg upgrade -y

2. Install the Nmap package by running the following command:

pkg install nmap 

3. To verify the installation, you can run the nmap command with the —version option

nmap —version 

Using NMAP in Termux

NMAP provides a wide range of options for scanning networks and hosts. Here are a few examples of how to use NMAP in Termux:

Scanning a range of IP addresses

To scan a range of IP addresses, you can use the -sL option followed by the range of IP addresses you want to scan. For example, to scan the range 192.168.1.1-255, you can use the following command:

 nmap -sL 192.168.1.1-255

This will list all the IP addresses within the specified range.

Scanning a single host

To scan a single host, you can use the -sV option followed by the hostname or IP address of the host you want to scan. For example, to scan the host www.example.com, you can use the following command:

nmap -sV http://scanme.nmap.org/

This will scan the specified host and report the services and operating system running on it.

 nmap -p 1-1000 www.example.com

This will scan the specified host and report the status of the ports within the specified range.

Hey folks! In this article I’m listing out some of the most used nmap tool commands that can be used for foot-printing purposes. I’ve tried my best to sort out most of them. But if you find any missing not mentioned here that you know, please comment below. This kind gensture will surely add knowledge of me & others.

Basic Scanning Techniques

Scan a single target —> nmap [target]

Scan multiple targets —> nmap [target1,target2,etc]

Scan a list of targets —-> nmap -iL [list.txt]

Scan a range of hosts —-> nmap [range of IP addresses]

Scan an entire subnet —-> nmap [IP address/cdir]

Scan random hosts —-> nmap -iR [number]

Excluding targets from a scan —> nmap [targets] –exclude [targets]

Excluding targets using a list —> nmap [targets] –excludefile [list.txt]

Perform an aggressive scan —> nmap -A [target]

Scan an IPv6 target —> nmap -6 [target]

Discovery Options

Perform a ping scan only —> nmap -sP [target]

Don’t ping —> nmap -PN [target]

TCP SYN Ping —> nmap -PS [target]

TCP ACK ping —-> nmap -PA [target]

UDP ping —-> nmap -PU [target]

SCTP Init Ping —> nmap -PY [target]

ICMP echo ping —-> nmap -PE [target]

ICMP Timestamp ping —> nmap -PP [target]

ICMP address mask ping —> nmap -PM [target]

IP protocol ping —-> nmap -PO [target]

ARP ping —> nmap -PR [target]

Traceroute —> nmap –traceroute [target]

Force reverse DNS resolution —> nmap -R [target]

Disable reverse DNS resolution —> nmap -n [target]

Alternative DNS lookup —> nmap –system-dns [target]

Manually specify DNS servers —> nmap –dns-servers [servers] [target]

Create a host list —-> nmap -sL [targets]

Advanced Scanning Options

TCP SYN Scan —> nmap -sS [target]

TCP connect scan —-> nmap -sT [target]

UDP scan —-> nmap -sU [target]

TCP Null scan —-> nmap -sN [target]

TCP Fin scan —> nmap -sF [target]

Xmas scan —-> nmap -sX [target]

TCP ACK scan —> nmap -sA [target]

Custom TCP scan —-> nmap –scanflags [flags] [target]

IP protocol scan —-> nmap -sO [target]

Send Raw Ethernet packets —-> nmap –send-eth [target]

Send IP packets —-> nmap –send-ip [target]

Port Scanning Options

Perform a fast scan —> nmap -F [target]

Scan specific ports —-> nmap -p [ports] [target]

Scan ports by name —-> nmap -p [port name] [target]

Scan ports by protocol —-> nmap -sU -sT -p U:[ports],T:[ports] [target]

Scan all ports —-> nmap -p “*” [target]

Scan top ports —–> nmap –top-ports [number] [target]

Perform a sequential port scan —-> nmap -r [target]

Version Detection

Operating system detection —-> nmap -O [target]

Submit TCP/IP Fingerprints —-> http://www.nmap.org/submit/

Attempt to guess an unknown —-> nmap -O –osscan-guess [target]

Service version detection —-> nmap -sV [target]

Troubleshooting version scans —-> nmap -sV –version-trace [target]

Perform a RPC scan —-> nmap -sR [target]

Timing Options

Timing Templates —-> nmap -T [0-5] [target]

Set the packet TTL —-> nmap –ttl Thursday, October 08, 2016 16:14 UTC+9 [target]

Minimum of parallel connections —-> nmap –min-parallelism [number] [target]

Maximum of parallel connection —-> nmap –max-parallelism [number] [target]

Minimum host group size —–> nmap –min-hostgroup [number] [targets]

Maximum host group size —-> nmap –max-hostgroup [number] [targets]

Maximum RTT timeout —–> nmap –initial-rtt-timeout Thursday, October 08, 2016 16:14 UTC+9 [target]

Initial RTT timeout —-> nmap –max-rtt-timeout [TTL] [target]

Maximum retries —-> nmap –max-retries [number] [target]

Host timeout —-> nmap –host-timeout Thursday, October 08, 2016 16:14 UTC+9 [target]

Minimum Scan delay —-> nmap –scan-delay Thursday, October 08, 2016 16:14 UTC+9 [target]

Maximum scan delay —-> nmap –max-scan-delay Thursday, October 08, 2016 16:14 UTC+9 [target]

Minimum packet rate —-> nmap –min-rate [number] [target]

Maximum packet rate —-> nmap –max-rate [number] [target]

Defeat reset rate limits —-> nmap –defeat-rst-ratelimit [target]

Firewall Evasion Techniques

Fragment packets —-> nmap -f [target]

Specify a specific MTU —-> nmap –mtu [MTU] [target]

Use a decoy —-> nmap -D RND: [number] [target]

Idle zombie scan —> nmap -sI [zombie] [target]

Manually specify a source port —-> nmap –source-port [port] [target]

Append random data —-> nmap –data-length [size] [target]

Randomize target scan order —-> nmap –randomize-hosts [target]

Spoof MAC Address —-> nmap –spoof-mac [MAC|0|vendor] [target]

Send bad checksums —-> nmap –badsum [target]

Output Options

Save output to a text file —-> nmap -oN [scan.txt] [target]

Save output to a xml file —> nmap -oX [scan.xml] [target]

Grepable output —-> nmap -oG [scan.txt] [target]

Output all supported file types —-> nmap -oA [path/filename] [target]

Periodically display statistics —-> nmap –stats-every Thursday, October 08, 2016 16:14 UTC+9 [target]

133t output —-> nmap -oS [scan.txt] [target]

Troubleshooting and debugging

Help —> nmap -h

Display Nmap version —-> nmap -V

Verbose output —-> nmap -v [target]

Debugging —-> nmap -d [target]

Display port state reason —-> nmap –reason [target]

Only display open ports —-> nmap –open [target]

Trace packets —> nmap –packet-trace [target]

Display host networking —> nmap –iflist

Specify a network interface —> nmap -e [interface] [target]

Nmap Scripting Engine

Execute individual scripts —> nmap –script [script.nse] [target]

Execute multiple scripts —-> nmap –script [expression] [target]

Script categories —-> all, auth, default, discovery, external, intrusive, malware, safe, vuln

Execute scripts by category —-> nmap –script [category] [target]

Execute multiple scripts categories —-> nmap –script [category1,category2, etc]

Troubleshoot scripts —-> nmap –script [script] –script-trace [target]

Update the script database —-> nmap –script-updatedb

 Judging two outptus : Ndiff

Ndiff verbose mode —-> ndiff -v [scan1.xml] [scan2.xml]

Comparison using Ndiff —-> ndiff [scan1.xml] [scan2.xml]

XML output mode —-> ndiff –xml [scan1.xm] [scan2.xml]

---

Did you like this article? Let us know in the comments below 🙂

Thank you!