Pfaff hobby 1032 инструкция на русском

MANUALSCAT | RU

Вопросы и ответы

У вас есть вопрос о Pfaff hobby 1032, но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для Pfaff hobby 1032. Пожалуйста, убедитесь, что вы опишите свои трудности с Pfaff hobby 1032 как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.

hobby 1022 1032 1042 Instruction manual Downloaded from www.Manualslib.com manuals search engine

• Author
  —

• View
  1.552

• Download
  4

1. 1. hobby 1022 1032 1042 Instruction manual Downloaded from
   www.Manualslib.com manuals search engine
2. 2. This household sewing machine is designed to comply with
   IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS When
   using an electrical appliance, basic safety precautions should
   always be followed, including the following: Read all instructions
   before using this household sewing machine. DANGER — To reduce the
   risk of electric shock: A sewing machine should never be left
   unattended when plugged in. Always unplug this sewing machine from
   the electric outlet immediately after using and before cleaning.
   Always unplug before relamping. Replace bulb with same type rated
   15 Watt. WARNING — To reduce the risk of burns, re, electric shock,
   or injury to persons: Do not allow to be used as a toy. Close
   attention is necessary when this sewing machine is used by or near
   children or in rm person. Use this sewing machine only for its
   intended use as described in this manual. Use only attachments
   recommended by the manufacturer as contained in this manual. Never
   operate this sewing machine if it has a damaged cord or plug, if it
   is not working properly, if it has been dropped or damaged, or
   dropped into water. Return the sewing machine to the nearest
   authorized dealer or service center for examination, repair,
   electrical or mechanical adjustment. Never operate the sewing
   machine with any air openings blocked. Keep ventilation openings of
   the sewing machine and foot controller free from the accumulation
   of lint, dust, and loose cloth. Keep ngers away from all moving
   parts. Special care is required around the sewing machine needle.
   Always use the proper needle plate. The wrong plate can cause the
   needle to break. Do not use bent needles. Do not pull or push
   fabric while stitching. It may de ect the needle causing it to
   break. Switch the sewing machine off (0) when making any adjustment
   in the needle area, such as threading needle, changing needle,
   threading bobbin, or changing presser foot, etc. Always unplug the
   sewing machine from the electrical outlet when removing covers,
   lubricating, or when making any other user servicing adjustments
   mentioned in the instruction manual. Never drop or insert any
   object into any opening. Do not use outdoors. Do not operate where
   aerosol (spray) products are being used or where oxygen is being
   administrated. To disconnect, turn all controls to the off (0)
   position, then remove plug from outlet. Do not unplug by pulling on
   cord. To unplug, grasp the plug, not the cord. SAVE THESE
   INSTRUCTIONS Downloaded from www.Manualslib.com manuals search
   engine
3. 3. Congratulations! You have bought a quality product made by
   Pfaff which is sure to bring you countless hours of sewing
   pleasure. Your new sewing machine features the very latest in de-
   sign and technology. Furthermore, it has numer- ous practical
   features which will make sewing much easier for you. Your sewing
   machine is as simple to operate as this instruction manual is to
   follow. Before you start sewing, please take the time to read these
   instructions carefully. It is certainly time well spent, and is the
   best way to find out just what your machine can do and make full
   use of all its features. If you have any further questions, just
   ask your Pfaff dealer, who will be happy to assist you with help or
   advice. We wish you many enjoyable hours creating your very own
   fashion ideas. Sewing for fun hobby Downloaded from
   www.Manualslib.com manuals search engine
4. 4. 1 13 12 11 10 9 8 7 654 32 18 17 1615 14 20 19 29 28 27 26
   25 24 23 22 21 32 3130 Downloaded from www.Manualslib.com manuals
   search engine
5. 5. Parts of the sewing machine hobby 1042 1 Thread guide 2
   Bobbin winder tension 3 Needle thread tension 4 Adjustment field 5
   Spool holder 6 Bobbin winder 7 Handwheel 8 Stitch pattern chart
   with presser foot 9 Pattern adjustment button 10 Reverse key 11
   Connection bushing 12 Master switch 13 Detachable work support with
   accessory box 14 Needle plate 15 Thread guide 16 Thread guide 17
   Thread cutter 18 Threading slot 19 Hook cover (enclosing sewing
   hook) 20 Presser foot holder with presser foot 21 Free-arm 22 Feed
   dog 23 Needle holder with fixing screw 24 Buttonhole lever 25
   Thread guide 26 Presser bar lifter 27 Sewing lamp (max. 15 W) 28
   Take-up lever 29 Carrying handle 30 Stitch length adjustment button
   31 Adjustment field 32 Stitch width adjustment button Downloaded
   from www.Manualslib.com manuals search engine
6. 6. 1 13 12 11 10 9 8 7 65 4 32 18 17 1615 14 20 19 29 28 27 26
   25 23 22 21 30 Downloaded from www.Manualslib.com manuals search
   engine
7. 7. Parts of the sewing machine hobby 1022 and 1032 1 Thread
   guide 2 Bobbin winder tension 3 Needle thread tension 4 Adjustment
   field 5 Spool holder 6 Bobbin winder 7 Handwheel 8 Stitch pattern
   chart with presser foot 9 Pattern adjustment button 10 Reverse key
   11 Connection bushing 12 Master switch 13 Detachable work support
   with accessory box 14 Needle plate 15 Thread guide 16 Thread guide
   17 Thread cutter 18 Threading slot 19 Hook cover (enclosing sewing
   hook) 20 Presser foot holder with presser foot 21 Free-arm 22 Feed
   dog 23 Needle holder with fixing screw 25 Thread guide 26 Presser
   bar lifter 27 Sewing lamp (max. 15 W) 28 Take-up lever 29 Carrying
   handle 30 Stitch length adjustment button Downloaded from
   www.Manualslib.com manuals search engine
8. 8. hobby Sewing for fun A Accessories and needles 53 Accessory
   compartment 11 B Bias tape binder 56 Blind-stitch foot 28 Bobbin
   case 14-15 Borders, embroidering 50 Buttonholes 33-37 Buttons 29 C
   Changing the needle 20 Changing the sewing lamp 63 Cleaning and
   oiling 62 Closed overlock stitch 32 Control panel 21 Cording foot
   57 D Darning 42 Detachable work support 11 Drawing up the bobbin
   thread 18 E Edge guide 26 Elastic blind stitch 28 Elastic stitch 31
   Elastic stitches 30-32 Electrical connection 10 Embroidering with
   the twin needle 50 F Fancy stitches 22 Feed dog, lowering 20
   Felling foot 57 Foot control 10 Free arm 11 G Gathering with the
   elastic thread 41 Gathering with the straight stitch 40 General
   sewing aids 25 H Handwheel, releasing 12 Hemming with the twin
   needle 38 Hemstitching 52 Honeycomb stitch 31 Hook, removing 62 K
   Knit-edge foot 58 L Lace-work 47 Linen buttonhole 34 Linen
   buttonhole with gimp thread 34 M Maintenance 61 Master switch 10 N
   Needle charts 59-60 Needle plate, removing 63 Needle thread tension
   26 Index Downloaded from www.Manualslib.com manuals search
   engine
9. 9. hobby Sewing for fun O Oiling the machine 62 One step
   buttonhole 35-37 Open overlock stitch 32 Overlock stitches 32 P
   Patchwork quilt 51 Practical sewing 25 Presser bar lifter 17 Q
   Quilt and patchwork foot 58 R Repairing tears 43 Reverse sewing 24
   Richelieu 50 Roll hemming 46 Ruf er 56 S Safety notes 2 Serging
   with the blind stitch foot 28 Serging with the zigzag stitch 27
   Setting utility stitches 22 Sewing feet (normal accessories) 54
   Sewing feet (special accessories) 55 Sewing lamp 63 Sewing on
   patches 42 Sewing problems and their solutions 64 Shell edging 48
   Smocking 39 Special accessories chart 55 Spool placement 12 Stitch
   chart 6, 7, 8 Stitch density 23 Stitch length adjustment button 23
   Stitch width adjustment button 24 Straight stitch 27 Stretch
   stitches, adjusting 23 Stretch triple straight stitch 30 Stretch
   triple zigzag stitch 30 T Thread cutter 18 Thread tension 14
   Threading 16-17 Threading the needle thread 16 Topstitching 26
   Traditional embroidery techniques 49 Troubleshooting 64 Twin needle
   38 W Winding the bobbin 12-13 Z Zigzag stitch 27 Zippers 44-45
   Downloaded from www.Manualslib.com manuals search engine
10. 10. hobby Sewing for fun hobby 1022 Stitch chart For these
    programs the stitch length can be set anywhere between 0 and 4 mm
    with the aid of the stitch length adjustment button (30). Program
    Name Application Buttonhole A3, A4/2, A1 Standard buttonhole for
    e.g. blouses and bed linen B Straight stitch For all straight
    stitch needle position middle and lockstitch work up to 4 mm C
    Straight stitch For all sewing and topstitch work requiring a
    needle position left left needle position, stitch width 2 mm D
    Zigzag stitch For serging and appliqu, stitch width 5 mm E Elastic
    stitch For stitching on elastic band, darning tears and patches F
    Elastic blind stitch For invisible hem attachment and simultaneous
    serging. Also for stretch fabrics. G Blindstitch For invisible hem
    attachment H Shell-edging stitch For decorative hems on ne
    materials, e.g. linen Downloaded from www.Manualslib.com manuals
    search engine
11. 11. hobby Sewing for fun Program Name Application Buttonhole A3
    A4/2 A1 Standard buttonhole for e.g. blouses and bed linen B
    Straight stitch For all straight stitch and lockstitch work needle
    position middle up to 4 mm C Straight stitch For all sewing and
    topstitch work needle position left requiring a left needle
    position D Zigzag stitch For serging and appliqu, stitch width 5 mm
    E Elastic stitch For stitching on elastic band, darning tears and
    patches F Elastic blind stitch For invisible hem attachment and
    simultaneous serging. Also for stretch fabrics G Blind stitch For
    invisible hem attachment H Shell-edging stitch For decorative hems
    on ne materials, e.g. linen J Greek stitch A classical decorative
    stitch e.g. for borders and towels B Stretch triple straight For
    stretch seams, e.g. crotch seams on sports- stitch, needle pos.
    middle and workwear C Stretch triple straight For stretch seams
    requiring a left needle position stitch, needle position left D
    Stretch triple- For attaching elastic tape on elastic materials
    zigzag stitch E Honeycomb stitch For sewing on elastic threads,
    overlocking and for decorative hem seams F Edge stitch For closing
    and serging one or more fabric layers wide G Edge stitch For
    closing and serging one or more fabric layers narrow H Open
    overlock stitch A closing and serging seam for stronger or
    non-fraying materials J Closed overlock stitch A closing and
    serging seam for fraying materials hobby 1032 Stitch chart For
    these programs the stitch length can be set anywhere between 0 and
    4 mm with the aid of the stitch length adjustment button (30).
    Downloaded from www.Manualslib.com manuals search engine
12. 12. hobby Sewing for fun hobby 1042 Stitch chart For these
    programs the stitch length can be set anywhere between 0 and 4 mm
    with the aid of the stitch length adjustment button (30). To alter
    the stitch width from 0 to 5, use the stitch width adjustment
    button (32). Program Name Application A Buttonhole Standard
    buttonhole for e.g. blouses and bed linen B Straight stitch, For
    all straight stitch and lockstitch work up to needle position
    middle to 4 mm C Straight stitch, For all sewing and topstitch work
    requiring a left needle position left needle position. D Zigzag
    stitch For serging and appliqu E Elastic stitch For stitching on
    elastic band, darning tears and patches F Elastic blind stitch For
    invisible hem attachment and simultaneous serging. Also for stretch
    fabrics. G Blind stitch For invisible hem attachment H Shell-edging
    stitch For decorative hems on ne materials, e.g. linen J Greek
    stitch A classical decorative stitch e.g. for borders on towels B
    Stretch triple straight For stretch seams, stitch, needle pos.
    middle e.g. crotch seams on sports- and workwear C Stretch triple
    straight For stretch seams requiring a left needle position stitch,
    needle pos. left D Stretch triple For attaching elastic tape on
    elastic materials zigzag stitch E Honeycomb stitch For sewing on
    elastic threads, overlocking towelling and for decorative hem seams
    F Edge stitch For closing and serging one or more fabric layers
    wide G Edge stitch For closing and serging one or more fabric
    layers narrow H Open overlock stitch A closing and serging seam for
    stronger or non-fraying materials J Closed overlock stitch A
    closing and serging seam for fraying materials Ornamental stitches
    for hobby 1042 Application: Embroidery, e.g. on blouses, children s
    wear and house- hold textiles. M N O P Downloaded from
    www.Manualslib.com manuals search engine
13. 13. 9 Operating the machine Bobbin winding 12-13 Bobbin case 14
    Changing the needle 20 Changing the presser foot 19 Control panel
    21 Detachable work support 11 Drawing up the bobbin thread 18
    Electrical connection 10 Free arm 11 Lowering the feed dog 20
    Needle thread tension 20 Presser bar lifter 17 Reverse serging 24
    Setting the utility stitches 22 Setting the stretch stitches 23
    Threading the needle thread 16-17 Thread cutter 18 Downloaded from
    www.Manualslib.com manuals search engine
14. 14. Operating the machine 10 Carrying handle Lift up the
    carrying handle of the sewing machine from behind. Carrying case
    The carrying case, which is part of the basic equipment, protects
    your sewing machine from dust and damage during transport. Before
    putting on the carrying case, lift up the carrying handle. Make
    sure the sew- ing machine symbol on the carrying case is pointing
    toward you. Electrical connection Connect the plug of the foot
    pedal to the connection bushing (11) on the sewing machine and the
    electrical socket. The sewing speed is regulated by pressing the
    foot pedal. For this sewing machine has to be used foot controller
    TJC-211 (220-240V) or TJC-150 (120V). Master switch The sewing lamp
    lights up when the mas- ter switch (12) is turned on. The machine
    is now ready to sew. 120 V 220 V Downloaded from www.Manualslib.com
    manuals search engine
15. 15. Operating the machine 11 Accessory compartment The
    accessory compartment is found underneath the detachable work
    support (13), that has to be opened. Organizing the accessories
    Place the enclosed accessories into the accessory compartment.
    Removing the detachable work sup- port /free arm In order to be
    able to sew with the free arm, you must swing the detachable work
    support (13) to the left and lift it out of the hole. Inserting the
    detachable work support Push the pins of the detachable work sup-
    port (13) from the left fully into the holes provided. When
    inserting the detachable work sup- port, make sure that it is ush
    with the free arm of the sewing machine. Downloaded from
    www.Manualslib.com manuals search engine
16. 16. Operating the machine 12 Preparing the machine for bobbin
    winding Pull the handwheel (7) fully to the right. This will
    prevent the needle moving while the machine is winding the bobbin.
    Mounting the bobbin Switch off the master switch (12) Place the
    empty bobbin onto the pin of the bobbin winding mechanism and press
    it down as far as possible. Push the bob- bin to the right. Note:
    The bobbin can only be wound if it is moved fully to the right.
    Winding the bobbin Pull the spool holder (5) up and place a spool
    on it. Place the thread clockwise into the bobbin winder tension
    (2) and run it to the bobbin. Wind the thread clockwise around the
    bobbin several times. Turn the master switch (12) on and press the
    foot pedal. Let go of the thread after a few revolutions. As soon
    as the bobbin is full the winding action will be stopped
    automatically. Press the full bobbin to the left and remove it from
    the pin. Downloaded from www.Manualslib.com manuals search
    engine
17. 17. Operating the machine 13 Winding a bobbin through the
    needle It is possible to wind bobbins even when the machine is
    threaded. Raise the press- er bar lifter (26) to the top position.
    Pull the thread underneath the presser foot. Bobbin winder tension
    Pass the thread through the bobbin thread tension (2) in a
    clockwise direction, so that it crosses over itself on the way to
    the bobbin. Pull the thread upward through the left-hand threader
    slot (18). Place the thread from left to right through the take-up
    lever (28). Wind the beginning of the thread several times around
    the bobbin in a clockwise direction. Hold the end of the thread
    rmly and press the foot pedal. Tip: While winding the bobbin,
    gently push down the front of the presser foot with your finger.
    Don t forget: After winding a bobbin, press the handwheel (7) back
    to the left! Downloaded from www.Manualslib.com manuals search
    engine
18. 18. Operating the machine 14 Hook cover Switch off the master
    switch (12). Hold the side of the hook cover (19) and open it
    towards you. Taking out the bobbin case Lift the latch of the
    bobbin case and pull the bobbin case out. Release the latch and
    take out the empty bobbin. Thread tension In order to achieve a
    perfect seam ap- pearance and durability make sure the needle
    tension is correctly adjusted, so that the thread interlace is not
    visible on both sides of the fabric. The following is valid for
    general sewing work: Thread interlace is visible on the top side of
    the fabric: The needle thread tension is too tight . The thread
    tension must be lowered. Thread interlace is visible on the under-
    side of the fabric: The needle thread tension is too loose. The
    thread tension must be raised. For fancy stitches, buttonholes and
    darning the thread interlace should be visible on the underside of
    the fabric. Downloaded from www.Manualslib.com manuals search
    engine
19. 19. Operating the machine 15 Inserting the bobbin Insert the
    full bobbin in the bobbin case. When doing so, pull the thread
    sideways through slot A and then under tension spring B so that it
    rests in the opening (see arrow). Inserting the bobbin case Lift
    latch D and push the bobbin case fully onto pin E of the sewing
    hook. The bobbin case nger F must point into cutout G. Check: Pull
    the bobbin thread sharply. The bobbin case must not fall out of the
    hook. Downloaded from www.Manualslib.com manuals search engine
20. 20. Operating the machine 16 Threading the needle thread Switch
    off the master switch (12). Pull the spool holder (5) up and mount
    the thread. Raise the presser bar lifter (26). Turn the handwheel
    until the take-up lever (28) is at its highest position. Thread by
    following the steps A to E. Tip: All the thread guides have an
    open- ing in which you can simply lay the threads. E D B C A
    Downloaded from www.Manualslib.com manuals search engine
21. 21. Operating the machine 17 Threading the needle Thread the
    needle thread through the eye of the needle from the front to the
    back. Presser bar lifter The presser foot is raised and lowered
    with the presser bar lifter (26). Downloaded from
    www.Manualslib.com manuals search engine
22. 22. Operating the machine 18 Drawing up the bobbin thread Raise
    the presser foot. Hold the needle thread and turn the handwheel
    towards you until the needle is at its highest posi- tion and the
    bobbin thread has formed a loop. Pull the needle thread to draw up
    the bobbin thread. Bobbin thread Close the hook cover (19) and pull
    the thread under the presser foot to the left. Thread cutter Pull
    the thread from the back to the front over the thread cutter (17).
    Downloaded from www.Manualslib.com manuals search engine
23. 23. Operating the machine 19 Removing the presser foot Switch
    off the master switch (12). Raise the needle to its highest
    position. Press the front of the presser foot up and the rear of
    the presser foot down until it disengages from the presser foot
    holder (20). Attaching the presser foot Place the presser foot
    under the presser foot holder (20) so that when the presser bar
    lifter (26) is lowered, the pins of the foot engage in the presser
    foot holder. Check: Please check that the presser foot is properly
    attached by raising the presser bar lifter. Downloaded from
    www.Manualslib.com manuals search engine
24. 24. Operating the machine 20 Changing the needle Switch off the
    master switch (12). To remove: Lower the presser foot and set the
    needle to its highest point. Loosen the xing screw (23) and pull
    the needle downwards. To insert: The at side A of the needle must
    face to the rear. Lower the presser foot and insert the needle,
    pushing it up as far as it will go. Hold the needle and tighten the
    xing screw (23) rmly. A Setting the needle thread tension Set the
    required amount of the needle thread tension (3) using the markings
    on the tension dial. The normal setting for sewing is 4-5. For
    embroidery and buttonhole sewing be- tween 2 and 3. (See page 15)
    Lowering the feed dog For certain sewing work, such as sewing on
    buttons, the feed dog (22) has to be lowered. To do this, open the
    hook cover (19) and move the metallic slide to the right-hand
    position (B) by pushing it down- wards and then to the right. To
    engage the feed dog, push down the slide and lock it into the
    left-hand position (A). A B Downloaded from www.Manualslib.com
    manuals search engine
25. 25. Operating the machine 21 Control panel All the sewing
    programs and the relevant foot recommendations are depicted on the
    control panel of your sewing machine. The various programs are
    selected using the stitch pattern adjustment button (9) on the
    left. With the adjustment button (30) on the right (hobby 1022,
    1032) or in the middle (hobby 1042) you can adjust the stitch
    length, the buttonhole density and the stretch stitches. With the
    adjustment button (32) on the right (model 1042) you can in nitely
    vary the stitch width from 0 to 5 mm. Downloaded from
    www.Manualslib.com manuals search engine
26. 26. Operating the machine 22 Setting utility stitches All
    stitch patterns that you can sew with your machine are illustrated
    in the stitch pattern chart (8). Using the stitch pattern
    adjustment button (9) you can set the desired stitch by turning the
    dial until the required letter appears in the adjustment eld (4).
    The lower value shows you the optimum stitch length. Setting fancy
    stitches (model 1042 only) Using the stitch pattern adjustment
    button (9) select the fancy stitches M-P. Turn the stitch pattern
    adjustment button until the required letter appears in the ad-
    justment eld (4). Note: For embroidering use the clear view foot.
    Downloaded from www.Manualslib.com manuals search engine
27. 27. Operating the machine 23 Stitch length adjustment button
    With the stitch length adjustment button (30) you can adjust the
    stitch length be- tween 0 and 4 mm by turning the point marking on
    the button to the required length. Buttonhole symbol Between the
    numbers 0 and 1 you will nd the buttonhole symbol. This area is the
    optimum stitch density for sewing but- tonholes. The closer you
    turn the dial to 0, the denser the stitch becomes. Setting stretch
    stitches (models 1032, 1042) All of the stitches on the darker
    back- ground are stretch stitches, i.e. they are suitable for
    stretch fabrics. Turn the stitch length adjustment button (30) to
    the stretch symbol and select the desired stitch with the stitch
    pattern adjustment button (9). Downloaded from www.Manualslib.com
    manuals search engine
28. 28. Operating the machine 24 Stitch width adjustment button
    (model 1042) With the stitch width adjustment button (32) you can
    in nitely adjust the width from 0 to 5 mm. The required width
    appears in the adjust- ment eld (31). Reverse sewing The machine
    sews in reverse only as long as the reverse sewing key (10) is
    pressed. Downloaded from www.Manualslib.com manuals search
    engine
29. 29. 25 Utility stitches and practical sewing Buttonholes 33-37
    Darning 42-43 Elastic stitches 28, 30-31 Gathering 40-41 General
    sewing aids 26 Hemming with the twin needle 38 Lace work 47
    Non-elastic stitches 27 Overlock stitches 32 Roll hemming 46 Sewing
    on buttons 29 Shell edging 48 Smocking 39 Zippers 44-45 Downloaded
    from www.Manualslib.com manuals search engine
30. 30. Utility stitches and practical sewing 26 Needle thread
    tension In order to achieve a perfectly sewn seam, the needle
    thread tension must be correctly adjusted. The normal setting for
    utility stitches is in the range from 4 to 5. Check the tension
    using a wide zigzag stitch. The thread interlace must be be- tween
    the two layers of fabric. If the needle thread tension is too
    tight, the interlace will be on the top side of the fabric. If the
    needle thread tension is set too loose, the interlace will be on
    the reverse side of the fabric. Topstitching with the edge guide
    (special accessories) For broad topstitching work we recom- mend
    using the edge guide. This ac- cessory guarantees topstitching
    which is parallel to the edge of the fabric. The edge guide is
    inserted into hole C and is secured with xing screw F. Feed aid for
    thick seams To ensure precise feeding at the begin- ning of a thick
    seam, we recommend plac- ing a piece of fabric which is the same
    thickness as the work under the back of the sewing foot to support
    it. C F Downloaded from www.Manualslib.com manuals search
    engine
31. 31. Utility stitches and practical sewing 27 Straight stitch
    Program B is the basic straight stitch in center needle position.
    Select stitch B. You can vary the stitch length with the stitch
    length adjustment button (30). Straight stitch in left needle
    position Some sewing work can be accomplished more easily by
    altering the needle posi- tion. E.g. topstitching a collar or
    sewing on a zipper. Model 1022, 1032: Select stitch C. Model 1042:
    Select stitch C or select stitch B. You can in nitely alter the
    needle position from 0/left to 5/center with the stitch width
    adjustment button (32). Zigzag stitch Model 1022, 1032: Select
    stitch D and set the zigzag stitch at the required width. Refer to
    the marks in the adjustment eld. Model 1042: Select stitch D. You
    can vary the stitch width from 0 to 5 mm with the stitch width
    adjustment button (32). Tip: Blind stitch foot no. 3 is particu-
    larly suitable for serging thin materials. While sewing, the thread
    passes over the bar thus preventing the fabric edge from rolling
    up. This ensures a good, smooth seam. The trimmed edge must be
    guided along the stop. You can ad- just the stop with the retaining
    screw. Downloaded from www.Manualslib.com manuals search
    engine
32. 32. Utility stitches and practical sewing 28 Elastic blind
    stitch, program F The elastic blind stitch is especially suit- able
    for invisible hems; sewing by hand is no longer necessary. It is
    equally suitable for both stretch and non-stretch fabrics. The hem
    is sewn and serged simultane- ously, i.e. an extra serging of the
    fabric edge is not necessary. On materials which fray strongly,
    serge the hem edge separately. Use blind stitch foot no. 3. Fold
    the hem width inwards. Lay the hem back outwards so that the hem
    edge protrudes by about 1 cm. Lay the fabric underneath the presser
    foot so that the crease line runs along the red guide. The needle
    should only catch one thread when entering the fabric in the crease
    line. Downloaded from www.Manualslib.com manuals search engine
33. 33. Utility stitches and practical sewing 29 Sewing on buttons
    For sewing on buttons, the presser foot must be removed and the
    feed dog must be lowered (c.f. page 20). Select the 4 mm zigzag
    stitch, stitch D. Model 1022, 1032: Select stitch D. Turn the
    stitch adjustment button (9) to the required width (refer to the
    marks). Model 1042 Select stitch D and set the stitch width ad-
    justment button (32) at 4. Turn the handwheel towards you and
    position the button so the needle enters the left hole in the
    button. Lower the presser bar lifter. The button will be held in
    place by the shank of the foot. Sew on the button. Take care to
    ensure that the needle also enters the right hand hole in the
    button. Knot the thread ends on the reverse side. Sewing on buttons
    with a thread shank Attach the presser foot. Place a match between
    the holes in the button and sew as described in the left hand
    column on this page. Remove the match and pull the fabric and the
    button apart. Wrap the shank with the sewing thread and knot it.
    Downloaded from www.Manualslib.com manuals search engine
34. 34. Utility stitches and practical sewing 30 Stitch B stretch
    (models 1032 and 1042 only) Stretch triple straight stitch Use this
    program for all seams which require a high level of durability:
    e.g. crotch seams. Stitch D stretch (models 1032 and 1042 only)
    Stretch triple zigzag The stretch triple zigzag is a very elastic
    and decorative seam which is particularly suitable for T-shirts and
    underwear. Serge the fabric edge. Fold over the desired hem width.
    Topstitch the hem from the face side. Downloaded from
    www.Manualslib.com manuals search engine
35. 35. Utility stitches and practical sewing 31 Elastic stitch
    Stitch E Because of its high elasticity, this stitch is used for
    sewing on elastic band, e.g. on underwear; skirt, trouser and dress
    waist- bands; and cuffs. If replacing elastic, cut off old elastic
    close to its edge. If needed, gather the fabric edge with the 4 mm
    long straight stitch (c.f. page 40). Divide fabric and elastic into
    quarters and mark. You may nd it easier to han- dle if you pin the
    elastic to the fabric at the matching marks. Stretch the elastic to
    t the fabric, matching marks as you sew. Overlap the ends slightly
    and secure with the elastic stitch. On skirts and pants (trousers)
    the elastic is sewn onto the prepared edge with the elastic stitch.
    Honeycomb stitch models 1032 and 1042 E stretch The honeycomb
    stitch is an elastic and decorative hem which is very suitable for
    underwear and T-shirts. Fold the seam or hem edge over twice and
    overstitch with the honeycomb stitch. Downloaded from
    www.Manualslib.com manuals search engine
36. 36. Utility stitches and practical sewing 32 What is an
    overlock stitch? For elastic and knitted materials, the hobby
    models 1032 and 1042 offer over- lock stitches which sew two fabric
    layers together and serge simultaneously. They are more elastic
    than normal seams, very durable and easy and fast to sew. Tip: We
    recommend using blind stitch foot no. 3 when sewing overlock seams.
    It guides particularly well and prevents the seam puckering even on
    wide seams. Stitch H stretch (models 1032 and 1042) Open overlock
    stitch With this stitch, thicker materials and fabrics which do not
    fray strongly can be sewn together perfectly. Tip: Ensure that the
    needle sews the right hand stitch just next to the mate- rial and
    not in it. Stitch J stretch (models 1032 and 1042) Closed overlock
    stitch With this stitch you can sew jersey fabrics perfectly. You
    can also sew on sleeve cuffs and knit collars. Tip: Ensure that the
    sleeve cuff is stretched while it is being sewn. Downloaded from
    www.Manualslib.com manuals search engine
37. 37. Utility stitches and practical sewing 33 Buttonholes Sewing
    buttonholes is very easy with all of the hobby models because the
    fabric does not have to be rotated. To make sewing buttonholes even
    easier we recommend the buttonhole foot. Generally, buttonholes are
    sewn onto lined, doubled fabric. However, it is necessary to
    additionally stabilize some materials such as silk, organza and
    rayon with backing pa- per so that the fabric does not gather when
    being sewn. Avalon (from Madeira) is very good for this purpose.
    This is a special type of stabilizer that dissolves in water. On
    materials such as velvet and thick wool fabrics that feed poorly it
    can be used either on or underneath the fabric. The material is
    thus fed more ef ciently by the machine and buttonholes are much
    easier to sew. Embroidery and darning threads are particularly good
    for sewing attractive seams. Using a fabric marker or pin, mark the
    starting points of the buttonholes and always sew a test buttonhole
    rst. Note (models 1022 and 1032): Before every buttonhole you must
    slide the runner of the buttonhole foot forward as far as it will
    go, i.e. the red arrow is at the first red line. The red markings
    are 0.5 cm apart. The red markings give you a means of determining
    the length of the but- tonhole. Tip: It is important to always sew
    a test buttonhole on the same fabric/stabilizer as your project.
    Downloaded from www.Manualslib.com manuals search engine
38. 38. Utility stitches and practical sewing 34 Program A3 /A4/2
    /A1 , (models 1022, 1032) Stitch length symbol buttonhole Sewing
    buttonholes with the button- hole foot Linen buttonhole Attach the
    buttonhole foot and slide the foot forward as far as it will go.
    Position the pattern adjustment dial at A1 and sew the rst
    buttonhole seam in the desired length. Select setting A4/2 and sew
    4-6 stitches for the bartack. Make sure the fabric stays in
    position while doing this. Select setting A3 and sew the second
    buttonhole seam in the reverse direc- tion and in the same length.
    Select setting A4/2 again and sew a few bartack stitches while
    making sure the fabric stays in position. Select straight stitch
    setting C (left nee- dle position) and sew a few tying off
    stitches. Cut open the buttonhole with the aid of a pair of
    scissors or a slitting knife. Linen buttonhole with gimp thread To
    sew especially durable buttonholes, e.g. on sportswear, we
    recommend using a gimp thread. On elastic materials the gimp thread
    is particularly important to prevent the but- tonhole from
    stretching. Lay the gimp thread over the rear pro- trusion A and
    pass the thread ends un- derneath the presser foot towards the
    front. Clamp the threads to the left and right of protrusion B.
    Slide the buttonhole runner as far forwards as possible and sew the
    but- tonhole as described in the left hand column. Pull the loop of
    the gimp thread into the buttonhole and trim the thread ends. A B
    Downloaded from www.Manualslib.com manuals search engine
39. 39. Utility stitches and practical sewing 35 1 step buttonhole
    (model 1042) For the 1 step buttonhole, the size of the buttonhole
    is automatically determined by placing the button in the special
    button- hole foot R. Buttons with a diameter up to 2.5 cm (1 ) can
    be placed in the button holder of the buttonhole foot. Set the
    machine: Stitch A Stitch length at buttonhole symbol Place the
    button on the fabric and mark the upper and lower point to
    determine the position of the buttonhole. Select the buttonhole
    pattern A by turning the stitch pattern adjustment button (9). Set
    the required stitch width using the stitch width adjustment button
    (32). Push the but- ton holder apart. Insert the button and push
    the button holder together as far as it will go. Attach the
    buttonhole foot R. Downloaded from www.Manualslib.com manuals
    search engine
40. 40. Utility stitches and practical sewing 36 Pull the
    buttonhole lever (24) downward. Place the garment underneath the
    presser foot. Lower the buttonhole foot. Sew slowly and stop the
    machine at the starting point, when the buttonhole has been
    completed. The front bartack and the left buttonhole seam are sewn
    rst and then the rear bartack and the right seam. Stop the machine
    after sewing the right seam. Downloaded from www.Manualslib.com
    manuals search engine
41. 41. Utility stitches and practical sewing 37 In order to sew
    the next buttonhole turn the stitch pattern adjustment button
    counter-clockwise until the reverse symbol appears. Then return the
    stitch pattern adjustment button to A. The machine is now ready to
    sew the next buttonhole. Once you have completed sewing all the
    buttonholes, push the buttonhole lever (24) upward as far as it
    will go. By pulling the bobbin thread, bring the needle thread to
    the underside of the fabric. Tie off the threads. Remove the button
    from the button holder. Tip: In order to prevent damaging the
    bartack by cutting open the buttonhole, insert a pin into the
    bartack. Downloaded from www.Manualslib.com manuals search
    engine
42. 42. Utility stitches and practical sewing 38 Hemming with the
    twin needle Topstitching work can be carried out on normal and
    stretch materials with the twin needle. Professional hems on
    T-shirts, knitwear and cycling shorts can be sewn quickly and
    easily with the twin needle. The twin needle is available in
    various widths. Please ensure that you use the jersey needle for
    stretch fabrics! First fold and iron the width of fabric de- sired
    for the hem. Topstitch the hem from the face side. Cut the
    protruding hem edge fabric close to the seam. Tip: On difficult
    materials such as ribbed knitwear it is advisable to baste the hem
    before topstitching it. Threading the twin needle Place a spool on
    each of the spool pins. Pass both of the threads through the thread
    guides (c.f. page 16). Lay the threads behind the thread guides
    (15) and (16) and thread one of the threads into each of the right
    and left needles. Downloaded from www.Manualslib.com manuals search
    engine
43. 43. Utility stitches and practical sewing 39 Smocking effect
    with elastic threads Fine, light fabrics such as batiste, rayon and
    silk are especially suitable for beauti- ful smocking work. For
    smocking work with elastic thread you should use an ad- ditional
    bobbin case and wind it by hand with the elastic thread. As the
    elastic thread is much stronger than the normal bobbin thread, the
    tension of the bobbin case must be set very loose. Don t forget
    however, the higher the bobbin thread tension, the tighter the
    gathering effect. Sew a test seam to determine the level of gather.
    Mark the rst line on the face side of the fabric and sew along it.
    Each additional seam can be sewn at a presser foot s width from the
    rst row. When sewing several seams next to one another, you must
    stretch the fab- ric to its original length when sewing the
    subsequent seams. Otherwise the gather will be irregular. Knot the
    threads at the beginning and end of the seam on the reverse side.
    Downloaded from www.Manualslib.com manuals search engine
44. 44. Utility stitches and practical sewing 40 Gathering with the
    straight stitch With program B you can gather sleeves, skirts and
    valances with a stitch length of 4 mm. To ensure a consistent
    gathering effect you should sew two or three rows of gathers. Mark
    the rst line on the face side of the fabric and sew along it. Allow
    the threads to extend approx. 10-20 cm be- yond the ends of the
    fabric. Each subsequent seam can be sewn one presser foot width
    from the last. Gather the piece of fabric by pulling the bobbin
    thread. You determine the amount of gather by how much you pull the
    thread. Secure the gathers by knotting the thread ends. Downloaded
    from www.Manualslib.com manuals search engine
45. 45. Utility stitches and practical sewing 41 Models 1032, 1042:
    stitch E stretch Gathering with the elastic thread Sleeve and waist
    seams can be gathered with ease using an elastic thread. The
    elastic thread does not have to be wound onto the bobbin. Mark the
    rst gathering seam on the reverse side of the fabric. Sew a few
    stitches using the honey- comb stitch and leave the needle in the
    fabric. The needle must be in the middle of the presser foot. Raise
    the presser foot and lay the elastic thread around the needle.
    Lower the presser foot and sew a few stitches. Pull the elastic
    thread evenly at both ends. You determine the amount of gather by
    the amount you pull the threads. The gather can also be altered
    after sewing by pulling the ends of the elastic threads. Knot the
    threads and the elastic to se- cure the gathers. Tip: The cording
    foot (special ac- cessories) is particularly suitable for
    gathering. Due to its guide grooves the elastic is fed evenly
    during the sewing process. Downloaded from www.Manualslib.com
    manuals search engine
46. 46. Utility stitches and practical sewing 42 Darning with the
    elastic stitch E Darning with the elastic stitch is especially
    suitable for repairing damaged areas. Sew over the damaged area in
    rows un- til it is well covered. Take care to ensure that the rows
    overlap. Sewing on patches To cover larger holes well, it is neces-
    sary to sew a new piece of fabric onto the damaged area. Baste the
    new piece of fabric onto the damaged area of the face side of the
    fabric. Sew over the fabric edges with the elas- tic stitch. Trim
    the damaged area back to the seam from the reverse side of the fab-
    ric. Tip: To simplify turning the corners of the patch, turn the
    handwheel until the needle is in the fabric. Raise the press- er
    foot and pivot the fabric. Downloaded from www.Manualslib.com
    manuals search engine
47. 47. Utility stitches and practical sewing 43 Repairing tears On
    tears, frayed edges or small holes it is useful to lay a piece of
    fabric under the reverse side of the fabric. The underlaid fabric
    reinforces the workpiece and en- sures you a perfect repair. Lay a
    piece of fabric underneath the material. It must always be a little
    larger than the damaged area. Sew over the damaged area in accord-
    ance with the size of the tear. Trim the underlaid piece of fabric
    back to the seam. Downloaded from www.Manualslib.com manuals search
    engine
48. 48. Utility stitches and practical sewing 44 Inserting centered
    zippers (concealed on both sides) Attach the zipper foot to the
    right side. Baste or pin the zipper in place and position it under
    the presser foot so that the teeth run along the side of the
    presser foot. Sew in half of the zipper, leaving the needle in the
    material. Raise the press- er foot and close the zipper. You can
    now sew the rest of the seam to the end of the zipper and stitch
    the cross-wise seam. Sew the second half of the zipper paral- lel,
    the same distance from the center seam as the rst half. Stop
    shortly before the end of the seam and leave the needle in the
    material. Raise the presser foot and open the zipper. You will now
    be able to complete the seam. Sewing in zippers There are different
    ways to sew in zip- pers. For skirts we recommend inserting a
    centered zipper. For men s or ladies pants (trousers), a lapped
    zipper works best. Different types of zippers are availa- ble in
    retail stores: invisible, metal, plastic, jeans and outerwear to
    name a few. We recommend metal zippers for heavier fab- rics such
    as jeans. For all other materials a plastic zipper will work well
    and create a softer nish to your completed garment. For all types
    of zip- pers it is important to sew close to the teeth of the
    zipper. The zipper foot can be engaged in the foot holder to the
    left or right, depend- ing on the method of insertion. If the foot
    is attached on the left, you can also use the needle position left
    (c.f. page 27). Downloaded from www.Manualslib.com manuals search
    engine
49. 49. Utility stitches and practical sewing 45 Trouser zippers
    Press the left front seam allowance over 1/8 (4 mm) narrower than
    the ac- tual seam allowance. Baste the zipper under the overlapping
    edge so that the teeth are still visible. Engage the zipper foot on
    the right and set the needle to the required position. Stitch close
    to the edge of the zipper teeth. Shortly before the end of the
    seam, open the zipper and nish sewing the seam. Close the zipper
    and baste the overlap evenly onto the other zipper half. Stitch
    along the basted seam. Tip: To achieve accurate seams we rec-
    ommend using the edge guide (special accessories). Downloaded from
    www.Manualslib.com manuals search engine
50. 50. Utility stitches and practical sewing 46 Roll hemming With
    the roll hemmer (special accesso- ries) you can nish the edge of
    blouses, scarves, or ruf es without having to iron the edges
    beforehand. Hemming prevents the edges from fraying and produces a
    neat and durable edge nish. Double-fold the fabric edge (about 1/8
    /2mm per fold). Place the folded fabric edge under the hemmer and
    sew a few straight stitches B, stitch length 2.5-3 mm, to secure.
    Leave the needle in the fabric, raise the presser foot and insert
    the fabric into the hemmer foot scroll. Lower the presser foot and
    while sew- ing, guide the fabric edge evenly into the hemmer.
    Ensure the fabric does not run underneath the right side of the
    presser foot. Tip: On silk, viscose and chiffon fab- rics, the roll
    hem is particularly attrac- tive with a zigzag stitch. Downloaded
    from www.Manualslib.com manuals search engine
51. 51. Utility stitches and practical sewing 47 Lace-work Lace
    inserts A beautiful heirloom effect can be achieved on christening
    wear, children s clothes and other garments with lace in- serts.
    Baste the lace to the face side of the fabric. Stitch very close to
    both edges of the lace using straight stitch. Carefully slit the
    fabric behind the lace at the center. Press these edges to- wards
    the garment. Overstitch both edges of the lace with a small zigzag
    stitch. Cut away the excess fabric on the back of your project.
    Lace edges with corners Tablecloths, napkins and clothing can all
    be beautifully enhanced with lace trim- mings. Serge/clean- nish
    the fabric edges. Stitch the lace onto the face side of the fabric
    up till the rst corner. Fold over the corners and stitch them
    diagonally. Continue until all edges are stitched. Downloaded from
    www.Manualslib.com manuals search engine
52. 52. Utility stitches and practical sewing 48 Shell edging The
    shell edge is very effective for thin, soft fabrics such as silk
    and rayon fabric. It is frequently used as an edge nish on
    undergarments.The higher the needle thread tension, the deeper the
    shell edge feed. Serge the fabric edge and iron over the seam
    allowance. Make sure that the fabric runs under the presser foot at
    half of the foot width. This provides a more prominent shell edging
    effect. Tip: If you add a colored pearl cotton thread at the edge
    you can strengthen the shell edging and obtain a pretty contrast at
    the same time. Instead of pearl cotton thread you can also place a
    different colored light fabric under- neath. Downloaded from
    www.Manualslib.com manuals search engine
53. 53. 49 Traditional embroidery techniques Combined Borders 50
    Embroidery with the twin needle 50 Hemstitching 52 Patchwork quilt
    51 Richelieu 50 Downloaded from www.Manualslib.com manuals search
    engine
54. 54. Traditional embroidery techniques 50 Richelieu This very
    artistic form of bar and eyelet embroidery is easy to create with
    your sewing machine. Transfer your pattern onto the right side of
    the fabric using a fabric marker. Place two layers of water-soluble
    stabi- lizer under the area to be embroidered and tightly hoop the
    fabric and stabi- lizer. Attach foot number 0 to your machine. To
    make the embroidery more stable, sew all of the contours twice
    using the straight stitch (stitch length approx. 1 mm). Carefully
    cut away the fabric from the areas that will form the cutouts
    approxi- mately 1/8 (2 mm) from stitching. Do not cut away the
    stabilizer it helps maintain the shape and stability of the areas
    while sewing. Embroider the contours with a satin stitch zigzag.
    When all satin stitching is completed, tear away large areas of
    water-soluble stabilizer and dissolve remaining small areas in
    water. Combined Borders (model 1042 only) You can create borders of
    any width by combining different embroidery programs. Tip: Apply
    iron-on backing or other sta- bilizer under the fabric.
    Embroidering with the twin needle (model 1042 only) Additional
    embroidery effects can be achieved using a twin needle. To avoid
    needle breakage, the twin needle spac- ing must not exceed 2 mm and
    the stitch width must not be greater than 3 mm. A description of
    how to thread the twin nee- dle is found on page 38. Downloaded
    from www.Manualslib.com manuals search engine
55. 55. Traditional embroidery techniques 51 Patchwork quilt
    Quilting is a traditional hand sewing technique. The method that
    the wives of American settlers developed to make use of material
    remnants has become a very popular artistic hobby for many sewing
    enthusiasts. Patchwork quilts used to be sewn exclu- sively by
    hand. Nowadays, however, you have the possibility to make your
    creative ideas a reality in a much shorter time. A quilt always
    consists of three layers of material. Lots of geometrically shaped
    pieces of material are joined together in continually changing
    patterns to form the top layer of the quilt. This is tacked onto
    the middle layer of polyester or cotton bat- ting and connected to
    the back layer of the quilt. The quilt backing is usually one
    uniform piece of fabric. And this is what you do Cut out the pieces
    of your quilt top us- ing templates you have bought or made
    yourself. A seam allowance of 1/4 (6.3 mm) should already be
    included in the templates. Spread these pieces out in front of you
    in accordance with the pattern and form small squares which you can
    then put together. These squares will then be sewn together and
    will form the top ply of the quilt. The seam allowances of quilts
    are usu- ally not serged and are always pressed towards the darker
    fabric side. Baste the completed quilt top to the batting and
    backing. In traditional quilts these three layers of material are
    then sewn together by hand with small stitch- es. However, it is
    quicker and more practical with the sewing machine, i.e. with the
    straight stitch. Quilting is usu- ally stitched about 3 mm away
    from the seam. Use foot number 0 or the quilt and patchwork foot
    (see page 58). When the quilting is nished you can simply bind the
    edges or make it into cushions, wearable art or other smaller
    projects. Downloaded from www.Manualslib.com manuals search
    engine
56. 56. Traditional embroidery techniques 52 Hemstitching
    Hemstitching is an old embroidery tech- nique and can be used to
    secure edges on table linen as well as for decoration on clothing.
    For your hemstitching work you will require a wing needle (special
    accessory) and coarse linen out of which you can easily pull the
    single threads. Furthermore, embroidery and darning thread is
    particularly suitable. With the stretch zigzag stitch you can sew
    various hemstitching techniques such as the wale hemstitch seam, a
    hem sewn with the hemstitch and a hemstitch seam as an edge. Use
    the normal presser foot (0). Wale hemstitch seam As with the hand
    hemstitch seam the threads are pulled out to the desired width.
    Using a narrow stretch zigzag stitch, sew along both of the fabric
    edges. The needle must perforate the area of the pulled threads
    just next to the edges. This bundles the threads. Hem edge sewn
    with hemstitch seam Iron the hem over twice and pull one or more
    threads out from above the hem. Using the stretch zigzag stitch,
    sew the hem from the face side. The nee- dle must perforate the hem
    on the right hand side and bundle the pulled threads on the left
    hand side. Hemstitching seam as edge This edge is used for very ne,
    thin mate- rials. It is particularly suitable for valances and ruf
    es. No threads have to be pulled. Using the stretch zigzag stitch,
    sew at a presser foot s width along the edge of the fabric. Using a
    small pair of scissors, trim off the excess fabric on the hemstitch
    edge. Downloaded from www.Manualslib.com manuals search engine
57. 57. 53 Accessories and needles Bias binder 56 Cording foot 57
    Felling foot 57 Knit-edge foot 58 Needle chart 59, 60 Quilting and
    patchwork foot 58 Ruf er 56 Sewing feet (normal accessories) 54
    Special accessories chart 55 Downloaded from www.Manualslib.com
    manuals search engine
58. 58. Accessories and needles 54 Sewing feet (normal accessories)
    0 Standard presser foot Part no: 98-694 847-00 3 Blind-stitch foot
    Part no: 98-694 845-00 4 Zipper foot Part no: 98-694 843-00 1 Fancy
    stitch foot (model 1042) Part no: 98-745 804-00200 5 Buttonhole
    foot (models 1022, 1032) Part no: 98-694 882-00 R Buttonhole foot
    (model 1042) Part no: 98-745 801-00/900 Screwdriver Part no: 93-040
    971-41 Bobbins Part no: 93-040 970-45 Machine oil Part no: 93-035
    910-91 Knife Part no: 99-053 016-91 Needle system Part no: 48-020
    804-32 130/705 H Downloaded from www.Manualslib.com manuals search
    engine
59. 59. Accessories and needles 55 Sewing feet (special
    accessories) The special accessories are for special sewing work.
    They are available from your dealer. Designation Order no. Sewing
    work Pintuck foot with guide 820224-096 For embroidering areas
    between pintucks Pintuck foot, 5 grooves 820226-096 For pintuck
    work (twin needle with needle spacing 1.6-2.0) Pintuck foot, 7
    grooves 820227-096 For pintuck work (twin needle with needle
    spacing 1.6-2.0) (needle size 80) Straight stitch foot with round
    hole 820235-096 Attention! Only use straight stitch in needle
    position middle Finger guard 820236-096 For all sewing work Edge
    guide 820251-096 For topstitching Felling foot 4.5 mm 820218-096
    For at felled seams Felling foot 6.5 mm 820219-096 For at felled
    seams Fancy stitch foot 820229-096 Multiple uses e.g. for
    buttonholes Ruf er 820255-096 For sewing dense (remove presser foot
    holder) or broad pleats on valances etc. Cording foot 820234-096
    For cording Quilt foot 820212-096 For sewing patchwork parts and
    quilting Roll hemmer 2 mm 820220-096 For hemming edges Hemmer 4 mm
    820221-096 For hemming edges Hemmer 820249-096 For hemming edges
    Bias binder 820245-096 For binding edges with bias tape Knit-edge
    foot 820216-096 For sewing together knitwear Non-stick foot
    820240-096 For sewing leather The following pages contain
    application examples of some special accessory feet. Downloaded
    from www.Manualslib.com manuals search engine
60. 60. Accessories and needles 56 Bias tape binder Binding with
    bias tape is a very easy method of giving fabric edges a smooth and
    neat appearance. For this you need unfolded bias tape about 1 (24
    mm) wide. Remove the presser foot and holder. At- tach the bias
    binder. Cut the beginning of the bias tape at a diagonal. Feed the
    tape into the scroll of the binder and pull out to the back. Adjust
    the binder and/or the needle position so that the needle pierces
    the fabric approximately 1/16 (1-1.5 mm) from the folded edge of
    the bias tape. Stitch about 1 (2.5 cm) along the bias tape. Insert
    the edge of the fabric to be bound between the bias tape edges into
    the slot of the binder. The bias tape will en- close the raw edge
    automatically during sewing. Tip: You can obtain an additional
    deco- rative effect by using a zigzag or fancy stitch. Ruf er With
    the ruf er you can make closely or widely spaced pleats
    automatically while sewing. This is very useful for ruf es, frills,
    home textiles, etc. The ruf er can be used in three different ways:
    1.Folding and securing pleats in fabric. 2.Folding pleats in fabric
    and securing to a second fabric in one operation. 3.Folding pleats
    in fabric, attaching lace and securing to another fabric in one
    operation. When you buy the ruf er from your PFAFF dealer, full
    operating instructions are included. Downloaded from
    www.Manualslib.com manuals search engine
61. 61. Accessories and needles 57 Felling foot Flat felled seams
    are particularly strong and are commonly known as jeans seams.
    Seams on sportswear and chil- dren s wear, blouses and shirts are
    more durable with this technique. You can make these seams
    particularly decorative by us- ing a sewing thread of a contrasting
    color. The felling foot is available in two different widths.
    Attach the felling foot to the presser foot holder. Place the
    fabrics wrong sides together. Overlap the raw edge of the lower ply
    by about 3/8 to 5/8 (1-1.5 cm). Place this overlapping edge over
    the tongue of the felling foot. The fabric must be placed fully
    under the presser foot. Sew along the folded edge with a straight
    stitch (stitch length 2.5-3 mm). Separate the fabric and feed the
    pro- truding hem into the felling foot. The hem is turned over by
    the foot and is overstitched along the edge. Pull the two fabric
    layers taut during sewing. Cording foot Cording is a technique in
    which pearl thread or a ne cord is overstitched to produce a purl
    seam. With this you can obtain an effect similar to braiding. Ap-
    pliqus can also be made more effective with this seam. Attach the
    cording foot. Place the pearl thread in the foot so it leads
    through one of the grooves at the front and lies under the presser
    foot at the back. Select a narrow satin zigzag stitch. Model 1022,
    1032: Select stitch D with the pattern adjustment button (9) and
    then the zigzag stitch in the required width. Set stitch length to
    buttonhole. Model 1042: Select stitch D with the pattern adjustment
    button (9). Set stitch length to buttonhole and stitch width to 2.
    Overstitch the pearl thread with a nar- row satin zigzag stitch.
    This produces what is known as the purl seam. Tip: You can also
    obtain a remarkable effect by overstitching a medium pearl thread
    with a thread of a different color. Downloaded from
    www.Manualslib.com manuals search engine
62. 62. Accessories and needles 58 Knit-edge foot As the knit-edge
    foot has a presser foot sole of varying height, thick knitted
    fabrics can be sewn with ease. To do so select the open or the
    closed overlock stitch (models 1032 and 1042) or the zigzag stitch.
    In order to obtain a perfect seam on knit fabrics, we recommend
    oversew- ing a wool thread, pulled slightly taut, into the seam.
    This will give the seam addi- tional strength and keep it from
    stretching out of shape. Quilt and patchwork foot The quilt and
    patchwork foot allows you to sew accurate 1/4 or 1/8 seams. The
    distance from the needle to the outer right edge of the foot is 1/4
    (0.63 cm) and to the inner right edge 1/8 (0.31 cm). Patching
    Attach the quilt and patchwork foot. Sew together your pieces of
    fabric with the straight stitch. For a seam allow- ance of 1/4 ,
    guide your fabric along the outer right edge of the foot. For a
    seam allowance of 1/8 , guide your fabric along the inner right
    edge of the foot. Quilting (Sewing through the top layer, eece
    layer and bottom layer of the quilt) Sew the three layers of the
    quilt (e.g. with the straight stitch) approx. 3 mm from the seam
    line. Downloaded from www.Manualslib.com manuals search engine
63. 63. Accessories and needles 59 Needle chart Selection of the
    right needle guarantees better sewing of the chosen material Fabric
    weight Fabric weight Fabric weight light medium heavy Needle Needle
    Needle 60 70 75 80 90 100 110 120 System & No. Profile Point
    and eye Suitable for 130/705 H Light Universal needle for linen,
    chiffon, Needle size 60-130 ball point batiste, organdy, woolens,
    velvet, fancy seams and embroidery. 130/705 H-SUK Medium Coarse
    knitted fabrics, Lastex, double- Needle size 70-100 ball point
    knit, jersey fabrics, Quiana and Simplex. 130/705 H-PS Medium
    Stretch-fabric needle particularly Needle size 75-100 ball point
    suitable for stretch and knitted fabrics. 130/705 H-SKF Large
    Wide-meshed corsetry, Lycra, Simplex Needle size 90-110 ball point
    and Lastex. 130/705 HJ Sharp Twill, workwear, heavy linen-fabrics,
    Needle size 90-110 round point blue jeans, light canvas and
    sailcloth. 130/705 H-LR Narrow twist Leather, suede, calf goat
    skin. Needle size 80-100 point (right) 130/705 H-PCL Narrow wedge
    Imitation leather, plastics, Needle size 80-110 point (left) foils
    and oilcloth. 130 H-N Light ball Topstitching with buttonhole silk
    or Needle size 70-110 point with synthetic threads no. 30/3. long
    eye 130/705 H-WING Hemstitching Effective hemstitching on batiste,
    Needle size point organdy and glass cambric. 100/120 130/705 H-E
    Medium Especially for embroidery. Needle size 75/90 ball point
    130/705 H-Q Small Top-stitched seams for quilting. Needle size
    80/90 ball point 130/705 H-M Sharp For working on microtex fiber.
    Needle size 60-80 round point Needle points Downloaded from
    www.Manualslib.com manuals search engine
64. 64. Accessories and needles 60 Classification Stitch length
    Stitch width Needle Suitable for spacing 130/705 H-ZWI 2.5 mm 1.6
    mm normal pintucks Size: 80 2.5 mm 2.0 mm normal pintucks 130/705
    H-ZWI Size: 80 2.5 mm 2.5 mm wide pintucks Size: 90 2.5 mm 3.0 mm
    extra wide Size: 100 3.0 mm 4.0 mm pintucks Ornamental stitch
    patterns / zigzag patterns Classification Stitch length Stitch
    width Needle Suitable for spacing 130/705 H-ZWI Size: 80 0.5-1.5 mm
    wide 1.6 mm embroidery Size: 80 0.5-1.5 mm narrow 2.0 mm embroidery
    Size: 80 0.5-1.5 mm narrow 2.5 mm embroidery Hem stitch/special
    twin needle Classification Stitch length Stitch width Needle
    Suitable for spacing 130/705 H-ZWI-HO Size: 80 2.3-3.0 mm very
    narrow Decorative Size: 100 2.0-3.0 mm very narrow hem stitch
    effect. Well-finished woven fabric and fine batiste are
    particularly suitable Fancy patterns with twin needles Before
    sewing the desired embroidery stitches, check whether needles can
    penetrate freely, by turning the handwheel. In this way, needle
    breakage is avoided as much as possible. Needle chart Downloaded
    from www.Manualslib.com manuals search engine
65. 65. 61 Maintenance and troubleshooting Changing the sewing lamp
    63 Cleaning and oiling 62 Removing the needle plate 63
    Troubleshooting 64 Downloaded from www.Manualslib.com manuals
    search engine
66. 66. Maintenance and troubleshooting 62 Removing the hook Switch
    off the master switch (12). To unlock the hook, fold open the black
    bar of the hook race. Take out the bobbin case. Note: Turn the
    handwheel (7) until the needle is at its highest position. Pull the
    hook cover ring out towards you. You can now remove the hook.
    Cleaning and oiling Clean the hook race with the brush. Place one
    drop of oil into the hook race (every 15-20 hours of operation).
    The machine is maintenance-free and must not be oiled at any other
    points. Downloaded from www.Manualslib.com manuals search
    engine
67. 67. Maintenance and troubleshooting 63 Removing the needle
    plate Raise the presser foot holder (26) and remove the presser
    foot. The needle must be at its highest position. Remove the
    detachable work support (13). Loosen the two screws with the
    screwdriver and lift the needle plate (14). Clean the feed dog (22)
    with the brush. Changing the sewing lamp. Switch off the master
    switch (12). Remove the detachable work support (13). The sewing
    lamp (bulb) is located inside the needle head of the machine. Turn
    the bulb half a rotation counter clock-wise and remove the bulb.
    Insert the bulb in the reverse order. Important! The maximum
    permissible wattage of the bulb is 15 watts. Downloaded from
    www.Manualslib.com manuals search engine
68. 68. Maintenance and troubleshooting 64 Sewing problems and
    their solutions Problem/Cause Remedy 1. The machine skips stitches
    The needle is not properly inserted. Push needle fully upwards.
    Flat side facing the back. Wrong needle is in use. Use needle
    system 130/705 H. Needle is bent or blunt. Insert a new needle. The
    machine is not properly threaded. Check how the machine is
    threaded. Needle is too small for thread. Use a larger needle. 2.
    Needle thread breaks See reasons above. See above. Thread tension
    is too tight. Adjust thread tension. Thread is poor or has slubs in
    it, or has Only use good quality threads. become dry after overlong
    storage. Thread is too thick. Use needle with large eye (system 130
    N). 3. Needle breaks off Needle is not pushed fully in. Insert new
    needle and push fully in. Needle is bent. Insert new needle. Needle
    is too thick or too thin. See needle table (Page 59, 60). Needle is
    bent, and has hit the needle Only guide the fabric lightly. plate
    because you are pulling or pushing the fabric. The bobbin case is
    not properly inserted. When you insert the bobbin case, push it
    fully into the stop. Pull lightly on the end of the thread to make
    sure bobbin case is secure. 4. The seam is sewn unevenly The
    tension needs adjusting. Check needle thread tension. Thread is too
    thick, slubbed or hard. Only use good quality threads. The bobbin
    thread is unevenly wound. Do not wind thread by hand. Make sure
    thread is pulled solidly into bobbin tension spring. Thread loops
    at top or underside of fabric. Re-thread machine. Check the needle
    thread tension. 5. The machine does not feed or feeds irregularly
    Sewing lint has collected between Remove needle plate, the feed dog
    teeth rows. remove lint with brush. 6. The machine is running with
    dif culty There are thread remnants Remove the threads and apply a
    drop in the hook ways. of oil to the hook. Important notes: Before
    changing presser feet and needle the master switch must be switched
    off. Do not attempt to sew without fabric under the presser foot.
    When leaving the machine, even for only a short time, switch off
    the master switch. This is important if there are any children
    nearby. Downloaded from www.Manualslib.com manuals search
    engine
69. 69. Downloaded from www.Manualslib.com manuals search
    engine
70. 70. Downloaded from www.Manualslib.com manuals search
    engine
71. 71. Technical Data Dimensions (w x h x d) 392 x 149 x 296 mm
    Weight 6,6 kg Nominal voltage 120 V / 220…240 V Power consumption
    80 W Sewing lamp 15 W Sewing speed max. 900 stitches / min.
    Stitching width max. 5 mm Stitching length max. 4 mm Presser foot
    lift 5 mm Max. presser foot height 11,5 mm Needle system 130 / 705
    H Package contents Sewing machine Carrying case Foot control Lead
    cord Accessories Instruction manual Please note that on disposal,
    this product must be safely recycled in accordance with relevant
    National legislation relating to electrical/ electronic products.
    If in doubt please contact your retailer for guidance Downloaded
    from www.Manualslib.com manuals search engine
72. 72.
    296-29-00311/000EEnglishInhouse2002-2007VSMGroupABAllrightsreservedPrintedinSwedenonenvironmental-friendlypaper
    Downloaded from www.Manualslib.com manuals search engine