Позиционер yt 2500 руководство - Arganabio.ru - инструкции по эксплуатации и многое другое

Contents
Table of Contents
Bookmarks

Quick Links

SMART POSITIONER

PRODUCT MANUAL

YT-2500 / 2550 / 2501 SERIES

Rotork YTC Limited

VERSION 1.34

Related Manuals for rotork YT-2500 Series

Summary of Contents for rotork YT-2500 Series

Page 1
SMART POSITIONER PRODUCT MANUAL YT-2500 / 2550 / 2501 SERIES Rotork YTC Limited VERSION 1.34…
Page 2: Table Of Contents

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Contents Introduction …………………………5 General Information for the users ………………….5 Manufacturer Warranty …………………….5 Explosion Proof Warning (Only for Intrinsic safety type positioners) …………6 Product Description ………………………7 General …………………………7 Main Features and Functions …………………..7 Label Description ……………………..8 Product Code ………………………..
Page 3
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Safety …………………………34 Connection ……………………….34 Ground …………………………. 36 Adjustments ……………………….. 37 Limit Switch Adjustment ……………………37 Variable Orifice Adjustment ………………….. 38 Optional Sub-PCB Installment ………………….. 39 Installation steps ……………………..39 Maintenance ………………………..
Page 4
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual 9.8.6 Split Range Mode (SPLIT) ………………….54 View Mode (VIEW) ……………………..55 Error and Warning Code ……………………. 57 10.1 Error code which is displayed during Auto calibration …………… 57 10.2 Error code which is displayed while using the product …………..
Page 5: Introduction

Introduction General Information for the users Thank you for purchasing Rotork YTC Limited products. Each product has been fully inspected after its production to offer you the highest quality and reliable performance. Please read the product manual carefully prior to installing and commissioning the product.
Page 6: Explosion Proof Warning (Only For Intrinsic Safety Type Positioners)

➢ For detailed warranty information, please contact the corresponding local Rotork YTC Limited office or main office in South Korea. Explosion Proof Warning (Only for Intrinsic safety type positioners) Please ensure the unit is being used and installed in conformity with local, regional, and national explosion proof within the proper safety barrier environment.
Page 7: Product Description

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Product Description General YT-2500 / 2550 / 2501 series Smart Valve Positioner accurately controls valve stroke in response to an input signal of 4~20mA from the controller. Built-in micro-processor optimizes the positioner’s performance and provides unique functions such as Auto-Calibration, PD Control, and HART Protocol Communications.
Page 8: Label Description

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Label Description • MODEL : Indicates the model number and additional options. • EXPLOSION PROOF : Indicates certified explosion proof grade. • INGRESS PROTECTION : Indicates enclosure protection grade. • INPUT SIGNAL : Indicates input signal range.
Page 9
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Fig. L-3: YT-2500 Intrinsic safety type (KCs, NEPSI, ATEX, IECEx) Fig. L-4: YT-2500 Intrinsic safety type (TRCU) Fig. L-5: YT-2500 Intrinsic safety type (CCC) Ver. 1.34…
Page 10
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Fig. L-6: YT-2550 Non-explosion proof Fig. L-7: YT-2550 Intrinsic safety type (KCs, ATEX, IECEx) Fig. L-8: YT-2550 Intrinsic safety type (CCC) Fig. L-9: YT-2501 Non-explosion proof Ver. 1.34…
Page 11
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Fig. L-10: YT-2501 Intrinsic safety type (KCs, ATEX, IECEx) Fig. L-11: YT-2501 Intrinsic safety type (CCC) Ver. 1.34…
Page 12: Product Code

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Product Code YT-2500 / 2550 series follows suffix symbols as follows. 2.4.1 YT-2500 / 2550 1 Linear Motion Type Rotary Single Acting type Double Non-Explosion Intrinsic safety : YT-2500 → KCs, NEPSI, ATEX, IECEx YT-2550 →…
Page 13: Yt-2501 Series Follows Suffix Symbols As Follows

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Fail Freeze Fail Option Fail Safe Operating temp. of inductive proximity limit switch is from -25°C~ . YT-2501 series follows suffix symbols as follows. 2.4.2 YT-2501 1 Linear Motion Type Rotary Single Acting type…
Page 14: Product Specification

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Product Specification YT-2500 / 2550 Specification 2.5.1 Model YT-2500 YT-2550 Housing Material Aluminum Stainless steel 316 Motion Type Linear Rotary Linear Rotary Acting Type Single / Double Input Signal 4~20mA DC Minimum Current Signal 3.5mA(Standard), 3.8mA(HART Included) Supply Pressure…
Page 15
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Tested under ambient temperature of 20°C, absolute pressure of 760mmHg, and humidity of 65% Please contact Rotork YTC Limited for detailed testing specification. Ver. 1.34…
Page 16: Yt-2501 Specification

0.6 kg (1.2 lb) 1.0 kg (2.1 lb) Cable(5M) 0.6 kg (1.3 lb) Painting Polyester Powder Coating Tested under ambient temperature of 20°C, absolute pressure of 760mmHg, and humidity of 65% Please contact Rotork YTC Limited for detailed testing specification. Ver. 1.34…
Page 17: Certifications

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Certifications ※ All certifications below are posted on Rotork YTC Limited homepage(www.ytc.co.kr). KCs (Korea) ➢ Type : Intrinsic safety Rating : Ex ia IIC T5/T6, Ex iaD IIIC T100°C/T85°C Certification No. : 11-KB2BO-0163X(YT-2500)
Page 18: Parts And Assembly

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Parts and Assembly Fig. 2-1: YT-2500 / 2550 series exploded view 1. Base Cover 6. Potentiometer 2. Option PCB 7. Main shaft 3. Main PCB 8. Base body 4. Pressure Gauge 9.
Page 19
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Positioner Rotary Remote Sensor Linear Remote Sensor Fig. 2-2: YT-2501 exploded view 1. Base cover of Remote sensor 10. Base cover of Positioner 2. Terminal of Remote sensor 11. PCB of Positioner 3.
Page 20: Product Dimension

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Product Dimension YT-2500 2.8.1 Fig. 2-3: YT-2500L Fig. 2-4: YT-2500R (Fork Lever Type) Fig. 2-5: YT-2500R (Namur Type) Fig. 2-6: YT-2500R (L/S Option) Ver. 1.34…
Page 21
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual YT-2550 2.8.2 Fig. 2-7: YT-2550L Fig. 2-8: YT-2550R YT-2501 2.8.3 Fig. 2-10: Rotary Remote Sensor Fig. 2-9: Linear Remote Sensor Fig. 2-11: YT-2501 Positioner Ver. 1.34…
Page 22: Installation

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Installation Safety When installing a positioner, please ensure to read and follow safety instructions. ➢ Any input or supply pressures to valve, actuator, and / or to other related devices must be turned off.
Page 23: Linear Positioner Installation

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Linear positioner Installation Linear positioner should be installed on linear motion valves such as globe or gate type which uses spring return type diaphragm or piston actuators. Fig. 3-2: YT-2500L / 2550L installation example Fig.
Page 24: Linear Positioner Installation Steps

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Linear positioner Installation Steps 3.3.2 1) Assemble the positioner with the bracket made in previous step by fastening the bolts. The bolt size is M8 x 1.25P. Fig. 3-4: Attaching to bracket Fig.
Page 25
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual 5) Insert the connection bar between the feedback lever and lever spring. The connection bar must be located upward from the lever spring as shown below left figure. If it is located downward from the lever spring as shown below right figure, the connection bar or the lever spring will be worn out quickly because of excessive strong tension.
Page 26
Fig. 3-9: Feedback lever and location of the connection bar ※ The effective linear lever angle of YT-2500 series is 30 degree. After installing the positioner, operate the valve from 0% to 100% stroke by using direct air to the actuator.
Page 27: Rotary Positioner Installation

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Rotary positioner Installation Rotary positioner should be installed on rotary motion valve such as ball or butterfly type which uses rack and pinion, scotch yoke or other type of actuators which its stem rotates 90 degrees. Before proceeding with the installation, ensure following components are available.
Page 28: Rotary Bracket Information (Only Yt-2500 / 2550)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Rotary Bracket information (Only YT-2500 / 2550) 3.4.3 The rotary bracket set (included with the positioner) contains two components. The bracket is designed to fit onto the actuator with 20mm, 30mm and 50mm stem height (H) according to VDI/VDE 3845 standard.
Page 29: Rotary Positioner Installation Steps

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Rotary positioner Installation Steps 3.4.4 1) Please check the actuator’s stem height and adjust the brackets by referring to the above bracket table. 2) Attached the brackets onto the actuator. It is recommended to use spring washer so the bolts will not be loosen from vibration.
Page 30
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual 6) Attach the positioner to the bracket. <Only fork lever type of YT-2500 / 2550: Fix the clamping pin (5mm Dia.) into the fork lever slot and insert center pin (2mm Dia.) of the main shaft of the positioner into the hole of center of the fork lever.
Page 31: Connection — Air

➢ Always recommended to use air filter regulator (i.e. YT-200 series). ➢ Rotork YTC Limited has not tested positioner’s operation with any other gases other than clean air. Please contact Rotork YTC Limited for any questions. Supply Pressure Condition ➢…
Page 32: Connection — Piping With Actuator

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Connection – Piping with actuator Single acting actuator 4.4.1 Singe acting type positioner is set to use only OUT1 port. OUT1 port of positioner should be connected with supply port of actuator when using spring return actuator of single acting type. Fig.
Page 33: Double Acting Actuator

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Double acting actuator 4.4.2 Double acting type positioner is set to use OUT1 and OUT2 port. As input signal increases, the supply pressure will be supplied through OUT1 port. Fig. 4-5: Double acting linear actuator (YT-2500L / 2550L) Fig. 4-6: Double acting rotary actuator (YT-2500R / 2550R) Fig.
Page 34: Connection — Power

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Connection – Power Safety ➢ There are two conduit entries on the product. See “2.4 Product Code” for conduit entry threads. ➢ Before connecting terminal, ensure that the power is off completely. ➢…
Page 35
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Fig. 5-2: Mechanical Limit Switch Terminal (Only YT-2500 / 2550) Fig. 5-3: Inductive Proximity Limit Switch Terminal (Only YT-2500 / 2550) Ver. 1.34…
Page 36: Ground

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Fig. 5-4: Remote sensor and cables (Only YT-2501) Ground 1) Ground must be done before operating the positioner. 2) Open base cover and there is an internal ground “F.G” on the left hand. An external ground bolt is located next to the conduit entry.
Page 37: Adjustments

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Adjustments Limit Switch Adjustment YT-2500 / 2550 can have limit switch option. If user wants to adjust the sensing position, please loosen bolts and adjust cam. Fig. 6-1: Mechanical Type Fig.
Page 38: Variable Orifice Adjustment

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Variable Orifice Adjustment Hunting can be occurred when the actuator’s volume is too small. In order to prevent hunting, orifice can be adjusted. By adjusting the orifice, the flow rate of the supply pressure to actuator can be adjusted.
Page 39: Optional Sub-Pcb Installment

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Optional Sub-PCB Installment By adding sub-PCB, the positioner can have additional functions. There are 3 types of sub-PCB. Hart Only Ptm Only Ptm+Hart Fig. 7-1: Types of Sub-PCB When purchasing option sub-PCBs separately, 4 Bolts and 2 supports (3 at Limit switch internal option) are supplied together with sub-PCB.
Page 40: Maintenance

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Maintenance Supply air If Supply air pressure is not stable or Supply air is not clean, the positioner may not function properly. Air quality and pressure should be checked regularly to see if the air is clean and pressure set is normal. Seals Once a year, it is recommend to check if there are any damaged parts of the positioner.
Page 41: Auto Calibration And Pcb Operation

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Auto Calibration and PCB Operation Warning Following process will operate valve and actuator. Before proceeding with any Auto Calibration, please separate valve from the entire system by using bypass valve, so Auto Calibration will not affect entire valve process.
Page 42: Run Mode (Run)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Run Mode (RUN) After power connection to the positioner, Run Mode will be appeared on positioner’s LCD screen in about 4 seconds. “RUN” indicates that the positioner adjusts the valve stroke according to the receiving signal. There are six types of display message in “RUN”…
Page 43: Auto1 Calibration (Auto1)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual AUTO1 Calibration (AUTO1) 9.4.1 AUTO1 changes only zero and end points; however other parameters(P, D etc.) will not be adjusted. It is recommended to perform AUTO1 when the positioner has been set by the valve manufacturer already, and the field user wants to re-calibrate the positioner.
Page 44: Manual Mode (Manual)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Manual Mode (MANUAL) Manual mode is used to maneuver valve stem manually. In Manual mode, the positioner does not control the valve by the signal received from outside, but it could be controlled to move up and down by pressing <UP>…
Page 45: Dead-Zone (Deadzone, %)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Dead-Zone (dEAdZONE, %) 9.6.1 Dead-Zone indicates the percentage of error allowance. When AUTO 2 or AUTO 3 calibration are done, this value would be set automatically and moderately. But if hunting still occur after AUTO 2 or AUTO 3 calibration for the reason such as high level of packing friction, increasing the value of Dead-Zone can stable the valve operation.
Page 46: D1 Value (Kd1)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual D1 Value (Kd1) 9.6.3 D value indicates the derivative value of the compensation signal based on the percentage of error allowance. As the value increase, it is more likely to have hunting. As the value decreases, it can have poor linearity or dynamic characteristic.
Page 47: Period T (Period T)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Period T (PERIOd T) 9.6.7 Period T indicates the positioner’s internal control time interval. As default, positioner will check current position respective to current input signal in every 100 msec. Auto DZ (AUTO dZ) 9.6.8 After the auto calibration, the positioner will create deadzone automatically.
Page 48: Hand Calibration Mode (Hand Cal)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Hand Calibration Mode (HAND CAL) Hand Calibration mode is used when zero-point and end-point require re-adjustment to use partial range of total strokes after Auto Calibration has been performed. Below are the list of features which could be set from Hand CAL mode. 1) Zero-Point (PV_ZERO) and End-Point (PV_END) for Valves 2) Zero-Point (TR_ZERO) and End-Point (TR_END) for Transmitter 3) Normal / Reverse Feedback Signal (TR NORM / REVS)
Page 49: Zero-Point (Tr_Zero) And End-Point (Tr_End) For Transmitter

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Zero-Point (TR_ZERO) and End-Point (TR_END) for Transmitter 9.7.2 TR_ZERO adjusts the zero point of the transmitter (4mA feedback), and TR_END adjusts the end point of the transmitter (20mA feedback). This is used when output signal becomes unstable and requires re-adjustment or when feedback output signal and actual stroke need to be used differently.
Page 50: Normal / Reverse Feedback Signal (Tr Norm / Revs)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Normal / Reverse Feedback Signal (TR NORM / REVS) 9.7.3 The feedback signal from the positioner can be changed to normal or reverse. <ENTER> <ENTER> <DOWN> → → → Press <UP> or <DOWN>…
Page 51: Acting Adjustment (Act Ra / Da)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Acting Adjustment (ACT RA / dA) 9.8.1 RA & DA are automatically set by performing “AUTO 2” from Auto Calibration. However, this function is used when the user wants to change RA & DA. The positioner can be set as Direct Action (DA) or Reverse Action (RA).
Page 52: User Defining Flow Characteristics (User Set)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual User defining flow Characteristics (USER SET) 9.8.3 User can make its own flow characteristic curve with this mode. USER SET can be set in two ways, 5 points and 18 points. User can choose whichever is more suitable for their application. 1) 5 points setting can be set with 4mA intervals.
Page 53: Tight Shut Open (Tshut Op)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual 2) 18 points setting can be set with 1mA intervals. The initial positions are P0(4mA=0%), P1(5mA=6.25%), P2(6mA=12.5%), … P16(20mA=100%) and P17(21mA=106.25%) but user can change the % values to different values. User can change all 18 points or only change partially and exit the menu by pressing <ESC>…
Page 54: Tight Shut Close (Tshut Cl)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Tight Shut Close (TSHUT CL) 9.8.5 Tight shut close shows the current value in percentage (%). Input current of 4mA is 0%, 20mA is 100%. If temporary Tight shut close value (≤100%) is set and input current value is below the set % value, the valve’s position is immediately moved to 0%.
Page 55: View Mode (View)

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual View Mode (VIEW) Displays various information of the positioner. <ENTER> <ENTER> <DOWN> 3 seconds → → → Press <UP> or <DOWN> button if the above is not displayed. <DOWN> <DOWN> <DOWN>…
Page 56
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual ITEM Description 1’st row→FF: Fail Freeze / FS: Fail Safe. FF / FS 2’nd row→Positioner model. YT-2500L 1’st row→version number of firmware. 1.6.03 2’nd row→VERSION: Main software version / VERSION / 2020DC31 2020-12(DC)-31: loading date of software.
Page 57: Error And Warning Code

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Error and Warning Code Error or Warning code occur if there is a problem during Auto calibration or using the product. ➢ Error code : These are indicated if the positioner cannot be controlled, malfunctions or becomes imprecise.
Page 58: Error Code Which Is Displayed While Using The Product

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual ➢ Indicated when the feedback lever’s angle used is excessively small ➢ Re-install the positioner by during auto calibration. moving it towards the actuator RNG ERR ➢ When this error is detected, auto stem so that the angle use of the calibration is aborted and this feedback lever becomes larger.
Page 59: Warning Code Which Can Be Checked From View Mode

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual ➢ Accumulated I value is I max or min’s limit. ➢ Degree of precision is low. ➢ Re-perform auto-calibration. ➢ Indicated if valve’s friction is ➢ Check air regulator’s set extremely high or set pressure of air pressure and re-adjust to regulator has been changed.
Page 60: Main Software Map

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Main Software Map Ver. 1.34…
Page 61
Product Manual Manufacturer: Rotork YTC Limited Address: 81, Hwanggeum-ro, 89 Beon-gil, Yangchon-eup, Gimpo-si, Gyeonggi-do, South Korea Postal code: 10048 Tel: +82-31-986-8545 Fax: +82-70-4170-4927 Email: ytc.sales@rotork.com Homepage : http://www.ytc.co.kr Issued : 2021-03-17 Copyright © Rotork YTC Limited. All Rights Reserved. Ver. 1.34…

Источник

Smart Positioner

YT-2500 / 2550 / 2501 Series

Contents

Introduction ………………………………………………………………………………………………………………….. 5

1.1

1.2

Manufacturer Warranty …………………………………………………………………………………………….. 5

1.3

Product Description ………………………………………………………………………………………………………. 7

2.1

General …………………………………………………………………………………………………………………… 7

2.2

Main Features and Functions …………………………………………………………………………………….. 7

2.3

Label Description …………………………………………………………………………………………………….. 8

2.4

Product Number ………………………………………………………………………………………………………. 9

2.4.1

2.4.2

2.5

Product Specification ……………………………………………………………………………………………… 11

2.5.1

YT-2500 / 2550 Specification ……………………………………………………………………………. 11

2.5.2

YT-2501 Specification ……………………………………………………………………………………… 12

2.6

Certifications………………………………………………………………………………………………………….. 13

2.7

Parts and Assembly ……………………………………………………………………………………………….. 14

2.8

Product Dimension …………………………………………………………………………………………………. 16

2.8.1

YT-2500 …………………………………………………………………………………………………………. 16

2.8.2

YT-2550 …………………………………………………………………………………………………………. 17

2.8.3

YT-2501 …………………………………………………………………………………………………………. 17

Installation ………………………………………………………………………………………………………………….. 18

3.1

Safety …………………………………………………………………………………………………………………… 18

3.2

Tools for installation ……………………………………………………………………………………………….. 18

3.3

Linear positioner Installation ……………………………………………………………………………………. 18

3.3.1

Safety ……………………………………………………………………………………………………………. 19

3.3.2

3.4

Rotary positioner Installation ……………………………………………………………………………………. 23

3.4.1

YT-2500 / 2550R Components …………………………………………………………………………. 23

3.4.2

3.4.3

3.4.4

Connection — Air ………………………………………………………………………………………………………….. 27

4.1

Safety …………………………………………………………………………………………………………………… 27

4.2

Supply Pressure Condition ………………………………………………………………………………………. 27

4.3

Piping Condition …………………………………………………………………………………………………….. 27

4.4

4.4.1

Single acting actuator ………………………………………………………………………………………. 28

4.4.2

Double acting actuator …………………………………………………………………………………….. 29

Ver. 1.04

Product manual

Источник

Table of Contents for rotork YT-2500 Series:

Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 58 RNG ERR ➢ Indicated when the feedback lever’s angle used is excessively small during auto calibration. ➢ When this error is detected, auto calibration is aborted and this message is indicated immediately on LCD display. ➢ Re-install the positioner by moving it towards the actuator stem so that the angle use of the feedback lever becomes larger. LEAK ➢ I
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 31 4 Connection — Air 4.1 Safety ➢ Supply pressure should be clean and dry air – avoiding moisture, oil and dust. ➢ Always recommended to use air filter regulator (i.e. YT-200 series). ➢ Rotork YTC Limited has not tested positioner’s operation with any other gases other than clean
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 8 2.3 Label Description • MODEL : Indicates the model number and additional options. • EXPLOSION PROOF : Indicates certified explosion proof grade. • INGRESS PROTECTION : Indicates enclosure protection grade. • INPUT SIGNAL : Indicates input signal r
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 23 3.3 Linear positioner Installation Linear positioner should be installed on linear motion valves such as globe or gate type which uses spring return type diaphragm or piston actuators. Fig. 3-2: YT-2500L / 2550L installation example Fig. 3-3
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 2 Contents 1 Introduction ……………………………………………………………………………………………………………………………….5 1.1 General Information for the users …………………………………………………………
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 45 9.6.1 Dead-Zone (dEAdZONE, %) Dead-Zone indicates the percentage of error allowance. When AUTO 2 or AUTO 3 calibration are done, this value would be set automatically and moderately. But if hunting still occur after AUTO 2 or AUTO 3 calibration for the reason such as high level of packing friction, increasing the value
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 35 Fig. 5-2: Mechanical Limit Switch Terminal (Only YT-2500 / 2550) Fig. 5-3: Inductive Proximity Limit Switch Terminal (Only YT-2500 / 2550)
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 49 9.7.2 Zero-Point (TR_ZERO) and End-Point (TR_END) for Transmitter TR_ZERO adjusts the zero point of the transmitter (4mA feedback), and TR_END adjusts the end point of the transmitter (20mA feedback). This is used when output signal becomes unstable and requires re-adjustment or when feedback output signal
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 33 4.4.2 Double acting actuator Double acting type positioner is set to use OUT1 and OUT2 port. As input signal increases, the supply pressure will be supplied through OUT1 port. Fig. 4-5: Double acting linear actuator (YT-2500L / 2550L) Fig. 4-6: Doubl
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 11 Fig. L-10: YT-2501 Intrinsic safety type (KCs, ATEX, IECEx) Fig. L-11: YT-2501 Intrinsic safety type (CCC)
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 18 2.7 Parts and Assembly Fig. 2-1: YT-2500 / 2550 series exploded view 1. Base Cover 6. Potentiometer 2. Option PCB 7. Main shaft 3. Main PCB 8. Base body 4. Pressure Gauge 9. Feedback Lever 5. Pilot
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 27 3.4 Rotary positioner Installation Rotary positioner should be installed on rotary motion valve such as ball or butterfly type which uses rack and pinion, scotch yoke or other type of actuators which its stem rotates 90 degrees. Before proceeding with the installation, ensure following components are available. 3.4.1 YT-2500R / 2550R Components ➢ Positioner ➢ Fork l
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 3 5.1 Safety ………………………………………………………………………………………………………………………………. 34 5.2 Connection ……………………………………………………………………………………………………………………….. 34 5.3 Ground …………………………………………………………………………
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 25 5) Insert the connection bar between the feedback lever and lever spring. The connection bar must be located upward from the lever spring as shown below left figure. If it is located downward from the lever spring as shown below right figure, the connection bar or the lever spring will be worn out quickly because of excessi
Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 56 ITEM Description FF / FS YT-2500L 1’st row→FF: Fail Freeze / FS: Fail Safe. 2’nd row→Positioner model. 1.6.03 VERSION / 2020DC31 1’st row→version number of firmware. 2’nd row→VERSION: Main software version / 2020-12(DC)-31: loading date of software. (January JA, February FB, March MR, April A

Questions, Opinions and Exploitation Impressions:

You can ask a question, express your opinion or share our experience of rotork YT-2500 Series device using right now.

Источник

Specifications:

1983/1983075-yt2500_series.pdf file (29 Mar 2023)

Accompanying Data:

rotork YT-2500 Series Valve Positioners PDF Product Manual (Updated: Wednesday 29th of March 2023 06:56:50 AM)

Rating: 4.3 (rated by 37 users)

Compatible devices: YT-1200 Series, YT-3400, YT-3700, YT-2700, 3450 Series, YT-2600 Series, YT-3100, YT-1000 Series.

rotork YT-2500 Series: Text of Product Manual

(Ocr-Read Version Summary of Contents, UPD: 29 March 2023)

6, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 6 ➢ In case of Fail Freeze product, it keeps the position of current valve in case of input current signal failure. However, please do not leave it in that state for a long time and take immediate action to re…
33, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 33 4.4.2 Double acting actuator Double acting type positioner is set to use OUT1 and OUT2 port. As input signal increases, the supply pressure will be supplied through OUT1 port. …
50, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 50 9.7.3 Normal / Reverse Feedback Signal (TR NORM / REVS) The feedback signal from the positioner can be changed to normal or reverse. <ENTER> → <ENTER> → <DOWN> → Press <UP> or …
41, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 41 9 Auto Calibration and PCB Operation 9.1 Warning Following process will operate valve and actuator. Before proceeding with any Auto Calibration, please separate valve from the entire system by using bypass valve, so Auto Calibrati…
13, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 13 8 Fail Option F : S : Fail Freeze Fail Safe 1) 2) Operating temp. of inductive proximity limit switch is from -25°C~ . 2.4.2 YT-2501 series follows suffix symbols as follows. YT-2501 …
2, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 2 Contents 1 Introduction ……………………………………………………………………………………………………………………………….5 1.1 General Information for …
10, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 10 Fig. L-6: YT-2550 Non-explosion proof Fig. L-7: YT-2550 Intrinsic safety type (KCs, ATEX, IECEx) Fig. L-8: YT-2550 Intrinsic safety type (CCC) Fig. L-9: YT-2501 Non…
51, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 51 9.8.1 Acting Adjustment (ACT RA / dA) RA & DA are automatically set by performing “AUTO 2” from Auto Calibration. However, this function is used when the user wants to change RA & DA. The …
21, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 21 2.8.2 YT-2550 Fig. 2-7: YT-2550L Fig. 2-8: YT-2550R 2.8.3 YT-2501 Fig. 2-10: Rotary Remote Sensor Fig. 2-9: Linear Remote Sensor …
37, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 37 6 Adjustments 6.1 Limit Switch Adjustment YT-2500 / 2550 can have limit switch option. If user wants to adjust the sensing position, please loosen bolts and adjust cam. Fig. 6-1: Mechanical Type Fig. 6-2: I…
17, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 17 2.6 Certifications ※ All certifications below are posted on Rotork YTC Limited homepage(www.ytc.co.kr). ➢ KCs (Korea) Type : Intrinsic safety Rating : Ex ia IIC T5/T6, Ex iaD IIIC T100°C/T85°C …
1, SMART POSITIONER PRODUCT MANUAL YT-2500 / 2550 / 2501 SERIES VERSION 1.34 Rotork YTC Limited
…
20, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 20 2.8 Product Dimension 2.8.1 YT-2500 Fig. 2-3: YT-2500L Fig. 2-4: YT-2500R (Fork Lever Type) Fig. 2-5: YT-2500R (Namur Type)…
59, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 59 D ➢ Accumulated I value is I max or min’s limit. ➢ Degree of precision is low. ➢ Indicated if valve’s friction is extremely high or set pressure of air regulator has been changed. ➢ Can be c…
45, Smart Positioner YT-2500 / 2550 / 2501 Series Product Manual Ver. 1.34 45 9.6.1 Dead-Zone (dEAdZONE, %) Dead-Zone indicates the percentage of error allowance. When AUTO 2 or AUTO 3 calibration are done, this value would be set automatically and moderately. But if hunting sti…

rotork YT-2500 Series: Recommended Instructions

GTS22KBPWW — 21.7 cu. Ft. Top-Freezer Refrirator, Motion Sensor Light Control SH-5411, IMPRESSA J9.3 One Touch TFT, Marine BF8A

Betriebsanleitung Operating Instructions Manuel d’utilisation Typ 8047 i/p positioner p/p positioner Version: 10/2019 M8047-def.doc Art.-Nr: 110 8047 Bunsenstrasse Tel: (0841) 9654-0 www.schubert-salzer.com D-85053 Ingolstadt Fax: (0841) 9654-590 …

8047 40
User Manual F712T0002, valid for F-712.MA1 and F-712.MA2 Mma, BRo, 12/6/2019 Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Phone +49 721 4846-0, Fax +49 721 4846-1019, Email [email protected], www.pi.ws F-712.MA1 and F-712.MA2 High-Precision Fiber Alignment System Stacked Multi-Axis Systems for Fast Multi-Channel Photonics A …

F-712.MA1 45
NR1088A QXD Rev DL. BERNARD s.a.4 rue d’Arsonval — BP 91 — 95505 GONESSE CEDEX (FRANCE)Tél : (33).01.34.07.71.00 — Fax : (33).01.34.07.71.01 — E-mail : mail @ bernard-actuators.comCommissioning instructions fCommissioning instructions fororINTEGRAL+INTEGRAL+contrcontrol andol andPOSIGAM+ POSIGAM+ or or MODUGAM+MODUGAM+positionerpositioner …

Integral+ 26
www.Fisher.comErrata Sheetfor3610J and 3620J Series Positioners,D200149X012, June 2008This errata sheet includes updated electromagneticcompatibility (EMC) information for the 3622electro-pneumatic converter.D Replace the portion of the TypicalPerformance for 3610J, 3610JP, 3620J, and3620JP Positioners with 1051, 1052, and1061Actuators section titled ElectromagneticInterference (EM …

Fisher 3610J 58
POSITIONERS POSIMATIC PS08 SAFETY INSTRUCTIONS FOR USE AND MAINTENANCE POSIMATIC PS08 W000385392 POSIMATIC PS08 PLASMA 95032111NG EDITION : EN Instructions for use REF : 8695 6645 REVISION : C DATE : 04-2018 Original instructions …

POSIMATIC PS08 36
Issue GT.L.NOV-20 Trading Estate Farnham Surrey England Doc. No.TD 106 Page 1 of 13AR7187 ISSUE GTD106 – 11/08:INDEX HDrawing office docs. Master KF WI TD etc.current TD sheet masters 1. CONTENTS. Page Section 1 1. Contents 2 2. Installation — …

AP 13
Instruction Manual PSx3xxDP halstrup-walcher GmbH Stegener Straße 10 D-79199 Kirchzarten, Germany Phone: +49 (0) 76 61/39 63–0 Fax: +49 (0) 76 61/39 63–99 E-Mail: [email protected] Internet: www.halstrup-walcher.com Document 7100.003964 03/2017 …

PS*3**DP series 31
3.568.5275.226© Copyright 2016EXPERTISE SOLUTIONS SUSTAINABILITYIM-P343-16CH Issue 7 — 20161. Safety information2. Introduction3. Installation4. Commissioning5. Maintenance6. Spare parts7. FaultndingEP5 and ISP5 SeriesElectropneumatic PositionersInstallation and Maintenance InstructionsAttention: Additional instructions are required when a ATEX intrisically safet …

EP5 Series 24
Series 195 & 295 Smart PositionersSpecifications — Installation and Operating InstructionsBulletin V -195/295SPECIFICATIONSInput Signal: 4 to 20 mA DC.Input Impedance: 460 Ω max @ 20 mA DC.Enclosure: Aluminum.Air Supply: 35 to 116 psi (2.4 to 8 bar).Air Connection: 1/4˝ NPT.Gage Connection: 1/8˝ NPT.Conduit Connection: 1/2˝ NPT.Linearity: ±0.5% FS.Hysteresis: …

Proximity 195 Series 10

Additional Information:

Operating Impressions, Questions and Answers:

Источник

Quick Links

Related Manuals for rotork YT-2500 Series

Summary of Contents for rotork YT-2500 Series

Page 2: Table Of Contents

Page 5: Introduction

Page 6: Explosion Proof Warning (Only For Intrinsic Safety Type Positioners)

Page 7: Product Description

Page 8: Label Description

Page 12: Product Code

Page 13: Yt-2501 Series Follows Suffix Symbols As Follows

Page 14: Product Specification

Page 16: Yt-2501 Specification

Page 17: Certifications

Page 18: Parts And Assembly

Page 20: Product Dimension

Page 22: Installation

Page 23: Linear Positioner Installation

Page 24: Linear Positioner Installation Steps

Page 27: Rotary Positioner Installation

Page 28: Rotary Bracket Information (Only Yt-2500 / 2550)

Page 29: Rotary Positioner Installation Steps

Page 31: Connection — Air

Page 32: Connection — Piping With Actuator

Page 33: Double Acting Actuator

Page 34: Connection — Power

Page 36: Ground

Page 37: Adjustments

Page 38: Variable Orifice Adjustment

Page 39: Optional Sub-Pcb Installment

Page 40: Maintenance

Page 41: Auto Calibration And Pcb Operation

Page 42: Run Mode (Run)

Page 43: Auto1 Calibration (Auto1)

Page 44: Manual Mode (Manual)

Page 45: Dead-Zone (Deadzone, %)

Page 46: D1 Value (Kd1)

Page 47: Period T (Period T)

Page 48: Hand Calibration Mode (Hand Cal)

Page 49: Zero-Point (Tr_Zero) And End-Point (Tr_End) For Transmitter

Page 50: Normal / Reverse Feedback Signal (Tr Norm / Revs)

Page 51: Acting Adjustment (Act Ra / Da)

Page 52: User Defining Flow Characteristics (User Set)

Page 53: Tight Shut Open (Tshut Op)

Page 54: Tight Shut Close (Tshut Cl)

Page 55: View Mode (View)

Page 57: Error And Warning Code

Page 58: Error Code Which Is Displayed While Using The Product

Page 59: Warning Code Which Can Be Checked From View Mode

Page 60: Main Software Map

Table of Contents for rotork YT-2500 Series:

Questions, Opinions and Exploitation Impressions:

Specifications:

rotork YT-2500 Series: Text of Product Manual

rotork YT-2500 Series: Recommended Instructions

Additional Information:

Operating Impressions, Questions and Answers: