Принтер canon mx310 инструкция по применению

или

Q T 5 1 3 6 1 V 0 2

Unpack the Machine

•

Please confirm the included items against the illustration printed on the lid of the packing box.

•

A USB cable is necessary to connect the machine with your computer.

1

Prepare the Machine

a

Place the machine on a flat and horizontal surface, and do not

place any objects in front of the machine.

Remove all the shipping tapes and protective material on the outside of the

machine.

Lift the Scanning Unit (Printer Cover) with both hands, and pull

b

the Scanning Unit Support down into place.

Scanning Unit (Printer Cover)

Scanning Unit

Support

Remove the protective material on the right side.

c

Protective Material

Caution

Before turning on the machine, remove all of the shipping tapes.

Lift the Scanning Unit (Printer Cover) slightly to set the Scanning

d

Unit Support back to its original position, and then gently close

the Scanning Unit (Printer Cover) with both hands.

e

Connect the telephone line and any necessary external device.

You can connect an external device (telephone or answering machine) if

necessary.

Remove the Telephone connector cap to connect the external device.

Telephone

Connector Cap

Connect the telephone

line cable to the wall jack.

Connect external devices as follows:

External device jack

Telephone line jack

Built-in computer modem and telephone

Telephone or answering machine

Telephone or

Telephone

TEL

LINE

answering machine

Telephone

Machine

Computer

Machine

line

Important

Be sure to use the bundled telephone line cable.

Start Here

Easy Setup Instructions

f

Plug the power cord in the back of the machine and connect the

other end to the wall outlet.

Document Cover

Power Cord

Important

•

Make sure that the Document Cover is closed.

•

Do NOT connect the USB cable at this stage.

Press the ON/OFF button to turn on the machine. The machine

g

will initialize. Wait until the Power lamp stops flashing and

remains lit green.

Press the [ or ] button on the Operation Panel to select the

h

language for the LCD, then press the OK button.

L A N G U A G E

S E T T I N G

E N G L I S H

[

Important

If an unintended language is displayed on the LCD, press the Back button to return

to the LANGUAGE SETTING screen.

Once the message «SET INK CARTRIDGE» appears, go to i.

Lift the Scanning Unit (Printer Cover) with both hands, and pull

i

the Scanning Unit Support down into place. The FINE Cartridge

Holder automatically moves to the left.

Write down the serial number located inside the machine. You

j

will need this to register your product.

Telephone

line

Important

When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to «Cleaning Your Machine» in the Quick Start Guide.

2

Install the FINE Cartridges

a

Remove the Black FINE Cartridge from its box.

Remove the protective tape gently.

b

Protective Tape

Important

•

Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.

The machine may not print out properly if you touch it.

•

Do not reattach the protective tape once you have removed it.

•

Be careful not to stain your hands or surrounding work area with ink on the

removed protective tape.

Insert the Black FINE Cartridge slightly slanted into the left slot

c

.

B

]

Make sure that the message «COVER IS OPEN» is displayed on the LCD and

the FINE Cartridge Holder has moved to the left.

FINE Cartridge Holder

Serial Number

Push up the FINE Cartridge until it clicks into place.

d

Important

For correct machine operation, make sure the FINE Cartridge is securely inserted.

e

Repeat the procedure for the Color FINE Cartridge, inserting it

into the right slot

.

C

f

Lift the Scanning Unit (Printer Cover) slightly to set the Scanning

Unit Support back to its original position, and then gently close

Electrical Contacts

the Scanning Unit (Printer Cover) with both hands.

Print Head Nozzles

Important

•

Once you have installed the FINE Cartridges, the message «CART. RETURN» is

displayed on the LCD. Wait until the following message appears before proceed-

ing. It takes about one minute.

1 0 0 %

•

If the messages «IN CASE OF MISPRINT PLEASE ALIGN HEAD» and «CHECK

THCKNESS LEVER CHECK IF THCKNESS LEVER IS SET TO LEFT» are displayed

on the LCD when you start printing after preparing the machine, press the OK

button on the machine.

For details on how to align the Print Head position and adjust the position of the

Paper Thickness Lever, refer to the Quick Start Guide.

Hardware setup is now complete.

Next, turn over and install the software.

For fax users

To use a fax, you need to set the telephone line type setting properly on

the machine.

If you are unsure of your telephone line type, contact your telephone

company.

Select the receive mode according to your needs.

• You want to receive only faxes automatically with the machine, or have a

dedicated telephone line for fax use only:

→ FAX ONLY MODE

• You are using a single telephone line for faxes and voice calls and use

voice calls more frequently:

Click

→ TEL PRIORITY MODE

• You are using a single telephone line for faxes and voice calls and want

to receive faxes automatically:

→ FAX PRIORITY MODE

• You have subscribed to a Distinctive Ring Pattern Detection (DRPD)

service with your telephone company:

→ DRPD

For details on how to confirm and change the settings, refer to the Quick

Start Guide.

Office All-In-One

8 . 5 x 1 1

S T D

0 1

P L A I N

Краткое содержание страницы № 1

Quick Start Guide
series
Office All-In-One
series
Quick Start Guide
The following FINE Cartridges are compatible with this product.
For information on product specifications, please visit our website at
www.usa.canon.com
QT51366V01
QT5-1366-V01 XXXXXXXX © CANON INC. 2007 PRINTED IN THAILAND

Краткое содержание страницы № 2

Getting Help from Canon Ordering Information For additional supplies, use the following descriptions and order numbers. Description Order # Help Us Help You Better FINE Cartridges Before you contact Canon, please record the following information. PG-30 Black 1899B002 Serial Number (located on the inside of the product): ____________________________________ CL-31 Color 1900B002 PG-40 Black 0615B002 Model Number (located on the top of the product): ______________________________________ CL-41 Colo

Краткое содержание страницы № 3

series Office All-In-One Quick Start Guide

Краткое содержание страницы № 4

Canon PIXMA MX310 series Office All-In-One Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2007 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon PIXMA MX310 series Office All-In-One. All statem

Краткое содержание страницы № 5

Table of Contents Before Using the Machine ………………………..2 The Print Result Not Satisfactory Operation Panel……………………………………….2 When Copying……………………………………….88 Menu Items……………………………………………..4 Printing Does Not Start……………………………88 Turning the Machine On and Off ………………..6 Paper Does Not Feed Properly ………………..89 Handling the Original Document……..

Краткое содержание страницы № 6

Before Using the Machine Operation Panel (1) (2)(3)(4)(5)(6) (7) (8) (9) (10) (11) (12) (20) (19) (18) (17) (16) (15) (14) (13) (1) ON/OFF button / Power lamp Turns the machine on and off. Lights or flashes green to indicate the power status. Before turning on the machine, make sure the Document Cover is closed. (2) COPY button Switches the machine to copy mode. (3) In Use/Memory lamp Flashes when the telephone line is in use. Lights when there are documents stored in the machine’s memory. (4)

Краткое содержание страницы № 7

(14) Coded Dial button Press this button and a two-digit code to dial a pre-registered fax/telephone number. (15) Tone button Switches temporarily to tone dialing. Also changes the mode when entering characters. (16) OK button Finalizes your selection for the menu or setting item. Dismisses the error message and resumes the machine’s normal operation after resolving a printing error or removing jammed paper. Ejects documents remaining in the ADF. (17) [ (-) and ] (+) buttons Scroll through menu

Краткое содержание страницы № 8

Menu Items Press the Menu button to display the menu items. You can specify the special copy settings, various fax settings, or perform the machine maintenance by using these menu items. Press the Settings button to display the setting items in copy mode or fax mode. You can specify the various print settings in copy mode, or page size and media type settings in fax mode by using these setting items. Press the FAX Quality button to display the fax quality setting items in fax mode. You can spe

Краткое содержание страницы № 9

*1 RX SETTINGS FAX mode AUTO PRINT RX Menu button ECM RX FAX SETTINGS FAX PRIORITY MODE RECEIVE MODE SET (page 47) *3 DRPD:FAX RNG PAT FAX PRIORITY MODE RING COUNT FAX ONLY MODE *3 MAN/AUTO SWITCH DRPD *2 REMOTE RX NETWORK SWITCH RX IMG REDUCTION TEL PRIORITY MODE RX START SPEED MEMORY REFERENCE (page 54) RX REPORT PRINT MEMORY LIST DEVICE SETTINGS PRINT DOCUMENT MAINTENANCE DELETE DOCUMENT Settings button PRNT REPORT/LIST (page 57) PAGE SIZE (page 52) ACTIVITY REPORT MEDIA TYPE (page 52) SPEE

Краткое содержание страницы № 10

Turning the Machine On and Off Turn on the machine before printing. Turning on the Machine Before turning on the machine, confirm the following. The FINE Cartridges are installed properly. If you are using the machine connected to a computer, confirm also the following. The machine is connected to your computer (or a compatible device). The MP Drivers are installed. Note If preparatory operations above are not complete, follow your setup sheet to complete them. 1 Press the ON/OFF button to t

Краткое содержание страницы № 11

Screen-saver Mode The LCD goes out if the machine is not operated for about five minutes*. Perform a print operation to restore the display. * You cannot change the wait time before the LCD goes out. Note When you want to restore the display, perform any operation such as copying, faxing, or scanning, or press any button except for the ON/OFF button. When you press the ON/OFF button while the machine is in Screen-saver mode, the machine turns off. Before Using the Machine 7

Краткое содержание страницы № 12

Handling the Original Document This section describes how to load the original document on the Platen Glass or the ADF. Original Document Requirements The original documents you load on the Platen Glass or the ADF for copying, scanning, or faxing must meet these requirements: Platen Glass ADF Document type Paper documents Multipage documents of the same size, thickness, and weight Photographs Books Documents that are not suitable for the ADF Size (W x L) Max. 8.5 x 11.7 inches / 216 Max.

Краткое содержание страницы № 13

Using the Platen Glass 1 Load the original document on the Platen (1) Glass. (1) Lift the Document Cover. (2) Load the original with the side to be copied, scanned, or faxed facing down on the Platen Glass. Place the original in landscape orientation and align the upper corner of it with the alignment mark as shown in the figure on the right. (2) Important Do not place any objects weighing more than 4.4 lb / 2.2 kg on the Platen Glass. Do not press or put weight on the original with pres

Краткое содержание страницы № 14

Using the ADF Note Set a document on the Platen Glass if you want to scan it at optimum quality. 1 Remove any documents from the Platen Glass. 2 Open the Document Tray. 3 Load the document in the ADF. Load the document with the side you want to copy, scan, or fax facing up in the ADF. 4 Adjust the Document Guides to match the document width. Note Ensure that the edge of the document stack is in line with the Paper Size Mark (A) imprinted on the Document Tray. (A) 10 Before Using the Machine

Краткое содержание страницы № 15

Loading Printing Paper This section describes how to load printing paper in the Rear Tray. Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media Media Suited for Business Documents Glossy Photo Paper High Resolution Paper Matte Photo Paper Photo Paper Plus Double Sided Photo Paper Plus Glossy Photo Paper Plus Semi-gloss Photo Paper Pro Photo Stickers Before Using the Machine 11

Краткое содержание страницы № 16

Paper Handling Recommended Paper and Requirements *1 Media Type Paper Paper Paper Media Type Model Support Output Thickness Machine Printer *2 Load Limit Tray Load Lever Setting Driver Limit Setting *3 Plain Paper — 100 sheets 50 sheets Left PLAIN Plain Paper PAPER *4 Envelopes — 10 envelopes 1 envelope Right — Envelope High HR- 80 sheets 50 sheets Left — High Resolution 101N Resolution *4 Paper Paper Super White SW-201 80 sheets 50 sheets Left PLAIN Plain Paper Paper PAPER *6 Glossy Pho

Краткое содержание страницы № 17

*3 Proper feeding of paper may not be possible at the maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to around half (around 0.2 inches / 5 mm in paper stack height). *4 Available only when printing from your computer. *5 When loading paper in stacks, the print side may be marked as it is fed in or sheets may be stuck to one another causing them not to

Краткое содержание страницы № 18

Loading Paper Important Load A4, Letter, or Legal-sized plain paper when receiving faxes. If you cut plain paper to 4″ x 6″ / 101.6 x 152.4 mm, 5″ x 7″ / 127.0 x 177.8 mm, or 2.13″ x 3.39″ / 54.0 x 86.0 mm (credit card-size) for a trial print, it can cause paper jams. You cannot print on postcards affixed with photos or stickers. Always load paper in portrait orientation (A). Loading paper in landscape orientation (B) can cause the paper to be jammed. (A) (B) Note We recommend using genu

Краткое содержание страницы № 19

2 Prepare to load paper. (1) (1) Open the Rear Tray and pull out the Paper Support. Put your finger in the rounded indent of the (2) Paper Support and pull it out until it stops. (4) (2) Open the Paper Output Tray. Put your finger in the rounded indent beside the Paper Output Tray and open it gently. (3) Open the Output Tray Extension. (3) Open up and set the Output Tray Extension completely by pressing down the hollow on its front side. (4) Adjust the position of the Paper Thickness Lever.

Краткое содержание страницы № 20

Loading Envelopes Use either European DL or US Comm. Env. #10-sized envelope. Important You need to print from the computer to print on envelopes. Do not use the following envelopes: – Envelopes with a double flap (or sticker flaps) – Envelopes with an embossed or treated surface – Envelopes with pressure seals – Envelopes whose gummed flaps are already moistened and adhesive 1 Prepare the envelopes. Press down on all four corners and edges of the envelopes to flatten them. If the envelopes

Quick Start Guide

Guide de démarrage rapide

Guía de iniciación rápida

Guia de consulta rápida

QT51368V01

ESPAÑOL

PORT DO BRASIL

ENGLISH

QT5-1368-V01 XXXXXXXX © CANON INC. 2007 PRINTED IN THAILAND

IMPRIME EN THAILANDE

www.canon.ca

www.canonlatinamerica.com

FRANÇAIS

The following FINE Cartridges are compatible with this product.

Les cartouches FINE (FINE Cartridges) suivantes sont compatibles avec ce produit.

Los siguientes cartuchos FINE (FINE Cartridges) son compatibles con este producto.

Os cartuchos FINE (FINE Cartridges) a seguir são compatíveis com este produto.