Pst 3202 руководство по эксплуатации

GW Instek PST Series Programmer's Manual

  • Contents

  • Table of Contents

  • Bookmarks

Quick Links

PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY

PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY

PROGRAMMER MANUAL

PROGRAMMER MANUAL

CONTENTS

PAGE

1. INTRODUCTION………………………………………………………………….. 1

2. CONNECTING POWER SUPPLY VIA GPIB INTERFACE.. 1

3. CONNECTING POWER SUPPLY VIA RS232 INTERFACE 4

⎯ i ⎯

⎯ ii ⎯

loading

Related Manuals for GW Instek PST Series

Summary of Contents for GW Instek PST Series

  • Page 1
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL CONTENTS PAGE 1. INTRODUCTION…………….1 2. CONNECTING POWER SUPPLY VIA GPIB INTERFACE.. 1 3. CONNECTING POWER SUPPLY VIA RS232 INTERFACE 4 4.
  • Page 2
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL 1. INTRODUCTION L4 (Listener) : The power supply becomes a listener when the controller sends its listen address with the ATN (attention) line In the modern automatic measurement system, communication asserted.
  • Page 3
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL THE PROGRAMMABLE POWER 3. CONNECTING Turn on at least two-thirds of the devices on the GPIB system while SUPPLY VIA RS232 INTERFACE using the system.
  • Page 4
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Do not use more than 15m of cable to connect devices to a PC. Ensure the same baud rate is used on the device as the one used on PC terminal.
  • Page 5
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL The RS232 connection testing SCPI If you want to test whether the RS232 connection is working or not, you can send a command from computer.
  • Page 6
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL command identifies it as a query. The command header is configured by header path and leaf node. Figure 5 shows the command header for the leaf node indicated in Figure 4.
  • Page 7
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Table 1 defines the Boolean and other parameter types for the programmable power supply. II. RS232 message terminators As there is no signal of end message on RS232 bus, therefore, use LF Parameter Type Description…
  • Page 8
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Because the programmable power supply hypothesis that a command General Setting Commands starts from the root, you have the option of beginning the initial Table 2 lists the general setting commands that control and query the command header with a colon (:).
  • Page 9
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL *SRE? Returns contents of Service Request Enable Register (SRER). :OUTPut:PROTection:CLEar Clears over-voltage and over-current and over temperature protection error message. *STB? Reads Status Byte Register (SBR).
  • Page 10
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL ★ Set the delay time under the current :SYSTem:AUTO:DELay Table 4: Miscellaneous Commands <NR1> responding memory status. *IDN? Returns instrument identification.
  • Page 11
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL 6. DETAILS OF COMMAND REFERENCE Examples: Each command in this chapter will give a detailed description. The *ESE 65 sets the ESER to binary 0100 0001. examples of each command will be provided and what query form might If the ESER contains the binary value 1000 0010, the *ESE? will return.
  • Page 12
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL *RST (no query form) Examples: *IDN? Returns Function: WK.TMPRO,PST-3202,A000000,FW1.00 Set all control settings of power supply to their default values but does *OPC not purge stored setting.
  • Page 13
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL *SAV decimal number representing the bits that are set (true) in the status register. Function: Save the setting data to a specific memory location (The PSS and PSH Syntax: series do not have this function).
  • Page 14
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL :CHANnel<x>:CURRent <NR2> Function: Examples: Set or query the output current value of the specific channel. :CHANnel1:VOLTage 12.0 sets the channel 1 voltage limit to 12.0 Syntax: volts.
  • Page 15
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL <x> for PSS & PSH can only be 1. Syntax: Returns: :CHANnel<x>:PROTection:VOLTage <NR2> <NR2> :CHANnel<x>:PROTection:VOLTage? Examples: <x> can be 1 or 2 or 3, <NR2> Please refer to the specification. :CHANnel1:MEASure:VOLTage? might return 11.55 to indicate the <x>…
  • Page 16
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Examples: Examples: :OUTPut:COUPle:TRACking 2 set the output of the channel 1 and OUTPut:STATe 1 enables the power supply output. channel 2 to series-tracking mode.
  • Page 17
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Returns register is non-destructive. <NR1> Syntax: Examples STATus:QUEStionable:CONDition? STATus:OPERation:ENABle 32767 sets all 15 bits of the register Returns: to 1.
  • Page 18
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL STATus:QUEStionable:EVENt(query only) SYSTem:AUTO:DELay Function: Return and clear the contents of the QUEStionable register. The response Function: is a decimal value that summarizes the binary values of the set bits. Set the delay time under the current responding memory status (The PSS and PSH series do not have this function.)
  • Page 19
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL SYSTem:AUTO:STATe the value of START. Returns: Function: Set or return automatic sequence setting (The PSS and PSH series do not <NR1>…
  • Page 20
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL SYSTem:MEMory? (query only) 7. STATUS AND ERROR REPORTING Function: Read the current memory section number displayed on the panel (The PSS A set of status registers allows the user to quickly determine the power supply’s internal processing status.
  • Page 21
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL QUEStionable To SBR Status Summary Voltage Summary Current Not Used Not Used Event Enable Condition Not Used Not Used Register Register Register…
  • Page 22
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Status Registers Table 4: QUEStionable Status Register There are two status registers are included to the power supply defined by Bit 15 Bit 14 Bit 13…
  • Page 23
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Use the serial poll or the *STB? Query to read the contents of the SBR. following enable registers. The bits in the SBR are set and cleared depending on the contents of the Event Status Enable Register (ESER) Standard Event Status Register (SESR), the Standard Event Status…
  • Page 24
    PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY PROGRAMMER MANUAL PROGRAMMER MANUAL Queues -221, “Settings conflict; Current setting error” -221, “Settings conflict; Recall setting error” The output queue is included to power supplies. -221, “Settings conflict;…

Источник

Программируемый линейный источник питания PST-3202: Максимально 32 В, 2 А, 64 Вт на канал; Три канала; Микропроцессорное управление, ЦАП 12 бит; Высокое разрешение (10 мВ, 1 мА); ЖК-дисплей: 192 × 128; Одновременная индикация режимов работы и выходных параметров; Удобный интерфейс настройки; Высокая стабильность, низкие пульсации; Защита от перенапряжения, перегрузки, перегрева; Логическое управление вентилятором охлаждения при изменении выходной мощности; Встроенный источник звукового предупреждения; Встроенная процедура калибровки; Запись/считывание до 100 профилей; Автовоспроизведение профилей от 0,1 с; Интерфейс RS-232 (опция GPIB); Послед./парал. соединение каналов; Автотрекинг каналов; Масса 10 кг.

Источник

Настольный источник питания, Программируемый, 3 Выхода, 0 В, 32 В, 0 А, 2 А

PST-3202 от компании GW Instek является 3-канальным, программируемым DC источником питания 158Вт. Системы защиты серии PST защищают их нагрузки от непредвиденных состояний. PST-3202 способен независимо работать в последовательном или параллельном режиме работы для увеличенной гибкости. Большой ЖК-дисплей отображает все выходы и настройки одновременно для упрощения работы. Программируемый интерфейс позволяет осуществлять автоматический шаг, 100 наборов памяти и синхронизацию. GPIB и 232C интерфейсы, драйверы LabView и SCPI совместимость позволяют осуществлять простую разработку ПО ATE и дистанционное управление. Многофункциональный PST-3202 идеально подходит для автоматизированного применения с множеством выходов и высоким разрешением вроде производства или систем монтажа в стойки.

  • Диапазон выходного напряжения от 0В до 32В х 2, 0В до 6В х 1
  • Диапазон выходного тока от 0А до 2А х 2, 0А до 5А х 1
  • Диапазон выходного напряжения от 0В до 33В х 2, 0В до 7В х 1
  • Высокое разрешение обеспечивается при 10мВ, 1мА (3А)
  • Стабилизация нагрузки менее или равна 3мВ (напряжение), менее или равно 3мА (ток)
  • Стабилизация линии менее или равна 3мВ (напряжение), менее или равна 3мА (ток)
  • ЖК-дисплей 192 х 128
  • Умное управление вентилятором (изменяется выходным напряжением)
  • Диапазон питания от 100В AC/ 120В AC/ 220В AC ± 10%, 230В AC(+10%/-6%), 50/60Гц
  • Размеры 230мм x 140мм x 380мм, вес 10кг

Области применения

Тестирование и Измерение

Содержание

Программируемый линейный источник DC питания PST-3202, руководство пользователя, шнур питания, испытательный провод GTL-104A x 3.

Примечания

Для данного продукта доступна услуга калибровки. Возможность выбора услуги стандартной сертификации или международно-признанной аккредитации UKAS. Для получения более подробной информации, посетите нашу страницу калибровки.

Гарантия Производителя:

—

Количество Выходов:

3 Выхода

Линейка Продукции:

PST Series

Максимальное Выходное Напряжение:

32В

Максимальное Напряжение Питания:

230В AC

Максимальный Выходной Ток:

2А

Минимальное Выходное Напряжение:

0В

Минимальное Напряжение Питания:

100В AC

Минимальный Выходной Ток:

0А

Тип Выхода Источника Питания:

Программируемый

SVHC (Особо Опасные Вещества):

No SVHC (15-Jan-2018)

Источник

GW INSTEK PST-3202 Bench Power Supply, Linear DC, Programmable, 3 Output, 0 V, 32V, 0 A, 2A

The PST-3202 from GW Instek is a 3-channel, 158W, programmable linear DC power supply. OVP, OCP and OTP protect PST-series and its loads from unexpected conditions. The PST-3202 is capable of independent, series or parallel operation for increased flexibility. The large LCD display conveniently displays all outputs and configurations simultaneously to simplify operation. The programmable interface allows automatic stepping, 100 set of memory and comprehensive timing operations. GPIB and RS232C interfaces, LabView drivers and SCPI compatibility allow easy ATE software development and remote control. The versatile PST-3202 is ideal for high resolution, multiple output and automated operations such as production testing and rack mounting systems.

.
Output voltage range from 0V to 32V x 2, 0V to 6V x 1
.
Output current range from 0A to 2A x 2, 0A to 5A x 1
.
Output OVP range from 0V to 33V x 2, 0V to 7V x 1
.
High resolution maintained at 10mV, 1mA ( 3A)
.
Load regulation is less than or equal to 3mV (voltage), less than or equal to 3mA (current )
.
Line regulation is less than or equal to 3mV (voltage), less than or equal to 3mA( current )
.
192 x 128 LCD display simultaneously
.
Intelligent fan control (changes by output power)
.
Power supply range from 100VAC/ 120VAC/ 220VAC ± 10%, 230VAC(+10%/-6%), 50/60Hz
.
Dimension is 230mm(W) x 140mm(H) x 380mm(D), weight is 10Kg
Источник

The PST series is 3-channel, 96 or 158W, programmable linear DC power supplies. High resolution, maintained at 10mV, 1mA ( 3A). OVP, OCP, and OTP, protects the PST-Series and its loads from unexpected conditions. The PST Series is capable of independent, series, or parallel operation for increased flexibility. The large LCD display conveniently displays all outputs and configurations simultaneously to simplify operation. The programmable interface allows automatic stepping, 100 sets of memory, and comprehensive timing operations. GPIB and RS232C interfaces, Labview driver and SCPI compatibility allows easy ATE software development and remote control. The versatile PST-Series is ideal for high resolution, multiple output, and automated operations such as production testing and rack mounting systems.

3D Model

GRA-407 RACK 3D DIME. (for PST-3201/3202)

2021-10-22

3D Model
version.,
【Member Only】
1.11 MB

DOWNLOAD

2D Drawing

GRA-407 RACK 2D DIME. (for PST-3201/3202)

2021-10-22

2D Drawing
version.,
【Member Only】
184 kB

DOWNLOAD

Catalog

2022 Power Supplies Catalog

2022-08-03

Catalog
version.,EN
195.15 MB

DOWNLOAD

LabVIEW Driver

The LabVIEW Driver For PST Series, PSH Series, PSS Series, for LabView 2009 version.

2020-06-12

LabVIEW Driver
version1.0.2.,
【Member Only】
423 KB

DOWNLOAD

Datasheet

PST-3202 Datasheet

2018-01-10

Datasheet
versionA.,EN
170.3 KB

DOWNLOAD

User Manual

PST-Series User Manual (pdf)

2018-01-10

User Manual
versionD.,EN
【Member Only】
399.6 KB

DOWNLOAD

PC Software Guide

PST/PSH/PSS New Labview Driver Renewal SOP

2018-01-10

PC Software Guide
version1.,EN
【Member Only】
447.6 KB

DOWNLOAD

PC Software

PSH、PSS、PST PC Software( Win10 supported).

2019-03-26

PC Software
version.,EN
【Member Only】
14.27 MB

DOWNLOAD

Programming Manual

PSH/PSS/PST Series Programming Manual (pdf)

2018-01-09

Programming Manual
versionA.,EN
【Member Only】
161.6 KB

DOWNLOAD

LabVIEW Driver

LabVIEW Driver For PST Series, PSH Series,PSS Series, PS (Vista supported)

2018-01-09

LabVIEW Driver
version.,EN
【Member Only】
379.8 KB

DOWNLOAD

Источник

Понравилась статья? Поделить с друзьями:
  • Как построить военную машину из лего инструкция
  • Экзекан для кошек инструкция по применению цена отзывы
  • Руководство службы 112
  • Чистая экстра кожный антисептик инструкция по применению
  • Iqos инструкция по применению на русском языке видео