Расширенное руководства пользователя

Quick Links

• Page 1
  Advanced User Guide…

• Page 2: Introduction

  After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.

• Page 3: Item Check List

  If you purchased a Lens Kit, check that the lenses are included. Be careful not to lose any of the above items. When you need Lens Instruction Manuals, download them from the Canon website ( = 4). The Lens Instruction Manuals (PDF files) are for lenses sold individually. Note that when purchasing the Lens Kit, some of the accessories included with the lens may not match those listed in the Lens Instruction Manual.

• Page 4: Instruction Manuals

  Downloading the Advanced User Guide/Instruction Manuals The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded from the Canon website to a computer or other device. Download site www.canon.com/icpd…

• Page 5
  The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded to a smartphone or tablet using the QR code. www.canon.com/icpd A software app is required to read the QR code. Select your country or region of residence, then download the Advanced User Guide/Instruction Manuals.

• Page 6: Quick Start Guide

  Quick Start Guide Insert the battery (=42). Upon purchase, charge the battery to start using ( = 40). Insert the card (=42). With the card’s label facing toward the back of the camera, insert it into the card slot. Attach the lens (=48). Align the red mount index on the lens with the red mount index on the camera to attach the lens.

• Page 7
  Quick Start Guide Set the Mode dial to <A> (=68). All the necessary camera settings will be set automatically. Focus on the subject (=54). < p > (an AF point) appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject.

• Page 8: About This Manual

  About This Manual Icons in this Manual < 6 > : Indicates the Main dial. < 5 > : Indicates the Quick control dial. < W >< X >< Y >< Z > : Indicates the corresponding direction on the < V > cross keys.

• Page 9
  About This Manual Basic Assumptions for Operational Instructions, Sample Photos Before following any instructions, make sure the power switch is set to < 1 > and the Multi-function lock feature is off ( = 46, = 58). It is assumed that all the menu settings and Custom Functions are set to their defaults.

• Page 10: Compatible Cards

  Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( = 367). SD/SDHC/SDXC memory cards UHS-II and UHS-I cards supported.

• Page 11: Chapters

  Chapters Introduction Preparation and Basic Operations Basic Shooting Creative Zone Shooting Playback Set-up Wi-Fi (Wireless Communication) Functions Custom Functions / My Menu Reference…

• Page 12: Table Of Contents

  Contents Introduction Item Check List ………………3 Instruction Manuals …………….4 Quick Start Guide ……………….6 About This Manual ……………..8 Compatible Cards …………….10 Chapters………………..11 Contents ………………..12 Index to Features ……………..21 Safety Instructions …………….25 Handling Precautions …………….28 Part Names ………………31 Preparation and Basic Operations Charging the Battery …………….40 Inserting/Removing the Battery and Card ……….42 Using the Screen ……………..45…

• Page 13
  Contents Basic Shooting Fully Automatic Shooting (Scene Intelligent Auto) …….68 Full Auto Techniques (Scene Intelligent Auto) ……..71 Special Scene Mode …………….75 Shooting Portraits …………….77 Shooting Group Photos …………….78 Shooting Landscapes …………….79 Shooting Moving Subjects …………..80 Photographing Children ……………81 Panning ………………..82 Shooting Close-ups …………….84 Shooting Food ………………85 Shooting Night Portraits (With a Tripod) ……….86…
• Page 14
  Contents Shooting Shooting Still Photos Tab Menus: Still Photo Shooting …………111 Setting Image Quality ……………..116 Setting Cropping/Aspect Ratio …………119 Setting the Image Review Time …………122 Correction of Lens Aberrations due to Optical Characteristics ..123 Setting the Desired Exposure Compensation ……..128 Auto Exposure Bracketing (AEB) …………129 Setting the ISO Speed for Still Photos ……….131 Auto Correction of Brightness and Contrast ……..136…
• Page 15
  Contents HDR (High Dynamic Range) Shooting ……….171 Interval Timer Shooting …………..176 Reducing Flicker …………….179 Selecting the Display Speed for High-Speed Continuous Shooting ..181 Card Reminder ……………….182 Setting Touch & Drag AF …………..183 Selecting the AF Operation …………..185 Selecting the AF Method …………..188 Focusing on People’s Eyes …………..198 Setting Continuous AF ……………199 Setting Lens Electronic MF …………..200…
• Page 16
  Contents Recording Movies Tab Menus: Movie Recording …………236 Recording Movies …………….239 Recording HDR Movies…………..247 Setting the Movie Recording Size …………249 Movie Cropping ………………256 Setting the Sound Recording ………….257 Movie Digital IS ………………260 Recording Time-lapse Movies …………262 Recording Video Snapshots ……………274 Setting Movie Servo AF …………..280 Other Menu Functions ……………285 General Movie Recording Cautions ………..291…
• Page 17
  Contents Erasing Images ………………314 Digital Print Order Format (DPOF) ………….318 Specifying Images for a Photobook ………..322 Processing RAW Images with the Camera ……..325 Applying Your Favorite Effects (Creative Assist) ……..331 Selecting the Type of RAW Image Processing ……..333 Editing Video Snapshot Albums …………334 Cropping JPEG Images …………..337 Resizing JPEG Images …………..339 Setting Ratings ……………….340…
• Page 18
  Contents Formatting Memory Cards …………..367 Displaying the Shooting Mode Guide ……….369 Displaying the Feature Guide …………370 Setting Eco Mode …………….371 Setting Power-Saving Features …………372 Adjusting the Screen Brightness …………373 Setting the Date, Time, and Time Zone ……….374 Setting the Interface Language …………377 Setting the Video System …………..378 Setting the Touch Control Response……….379 Disabling Beeps for Camera Operations ………..380…
• Page 19
  Contents Registering Custom Shooting Modes ……….408 Reverting the Camera to the Default Settings ……..410 Setting Copyright Information …………411 Checking Other Information ……………413 Wi-Fi (Wireless Communication) Functions What You Can Do via Wi-Fi (Wireless Communication) Functions ..416 Connecting to a Smartphone via Wi-Fi ……….419 Connecting to a Computer via Wi-Fi ……….453 Connecting to a Printer via Wi-Fi …………461 Sending Images to a Web Service ………….473…
• Page 20
  Contents Custom Functions / My Menu Tab Menus: Customization …………..524 Setting Custom Functions …………..525 Custom Function Settings …………..526 Clearing Custom Function Settings ………..546 Tab Menus: My Menu ……………..547 Registering My Menu ……………..548 Reference Software Overview …………….554 Importing Images to a Computer …………556 Charging a Battery in the Camera ………….558 Using an Extension Grip …………..560 Troubleshooting ……………..562…

• Page 21: Index To Features

  Index to Features Power Viewfinder Charging the battery ( = 40) Dioptric adjustment ( = 52) Battery level ( = 47) Information display in viewfinder ( = 389) Checking battery information ( = 381) Viewfinder vertical display ( = 390) Eco mode ( = 371) Viewfinder display format ( = 393) Power saving ( = 372)

• Page 22
  Index to Features Metering Shooting Metering mode ( = 211) Shooting mode ( = 34) HDR mode ( = 171) Drive Multiple exposures ( = 165) Drive mode ( = 206) Bulb timer ( = 107) Self-timer ( = 209) Depth-of-field preview ( = 101) Maximum burst ( = 118) Remote switch ( = 219)
• Page 23
  Index to Features Flash Playback External flash ( = 220) Image review time ( = 122) Flash exposure compensation Single-image display ( = 296) ( = 220) Shooting information display FE lock ( = 220) ( = 597) Flash function settings ( = 225) Grid display ( = 353) Flash Custom Function settings Touch playback ( = 298)
• Page 24
  Index to Features Image Editing Wireless Features RAW image processing ( = 325) Connect to smartphones ( = 419) Resizing JPEGs ( = 339) Auto send images to smartphones ( = 439) Cropping JPEGs ( = 337) Remote control (EOS Utility) Print Order ( = 453) Auto send images to computers…

• Page 25: Safety Instructions

  Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.

• Page 26
  Safety Instructions Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. •…
• Page 27
  Safety Instructions CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use.

• Page 28: Handling Precautions

  If you accidentally drop the camera into water or are concerned that moisture (water), dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service Center. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.

• Page 29
  If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
• Page 30
  Handling Precautions Screen and Viewfinder Although the screen and viewfinder are manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors.

• Page 31: Part Names

  Part Names (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) < V > Focal plane mark (10) Flash sync contacts < 6 > Main dial (11) Hot shoe < B > Multi-function button (12) RF lens mount index Shutter button (13) Power switch Movie shooting button…

• Page 32
  Part Names (14) (10) (11) (15) (16) (17) (12) (18) (13) Eyecup (11) Access lamp Viewfinder eyepiece (12) < Q / 0 > Quick Control/Setting button Dioptric adjustment knob (13) < M > Menu button Terminal cover (14) < F > Remote control terminal Mode dial (15) <…
• Page 33
  Part Names (10) (11) (12) (13) (14) (15) (16) Accessory positioning hole (10) Strap mount Screen (11) Card slot Tripod socket (12) Battery compartment < W >< X >< Y >< Z >: < V > cross (13) Card slot/Battery compartment keys cover lock Serial number…
• Page 34
  Part Names Mode Dial The Mode dial includes Basic Zone modes, Creative Zone modes, and movie recording mode. (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto ( = 68) 8 : Special scene ( = 75) Portrait ( = 77)
• Page 35
  Part Names (2) Creative Zone These modes give you more control for shooting various subjects as desired. Flexible-priority AE ( = 104) Program AE ( = 96) Shutter-priority AE ( = 98) Aperture-priority AE ( = 100) Manual exposure ( = 102) Bulb ( = 106) (3) Custom shooting modes You can assign <…
• Page 36
  Part Names Viewfinder Information Display Information displayed varies depending on camera status.
• Page 37
  Part Names Battery Charger LC-E17 Charger for Battery Pack LP-E17 ( = 40). (1) Power plug (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot Battery Charger LC-E17E Charger for Battery Pack LP-E17 ( = 40). (1) Battery pack slot (2) Full-charge lamp (3) Charge lamp (4) Power cord…
• Page 38
  Part Names Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.

• Page 39: Preparation And Basic Operations

  Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.

• Page 40: Charging The Battery

  Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery in the charger. Do the opposite to remove the battery. Recharge the battery. For LC-E17 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.

• Page 41
  Charging the Battery Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity.

• Page 42: Inserting/Removing The Battery And Card

  Inserting/Removing the Battery and Card Insert a fully charged Battery Pack LP-E17 into the camera. The camera can use SD, SDHC, or SDXC memory cards (sold separately). UHS-II/ UHS-I SDHC and SDXC cards are also supported. The captured images are recorded onto the card. Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing.

• Page 43: The Card Slot

  Inserting/Removing the Battery and Card You cannot use batteries other than the Battery Pack LP-E17. After opening the card slot/battery compartment cover, be careful not to swing it back any further. Otherwise, the hinge may break. Removal Open the card slot/battery compartment cover.

• Page 44: The Card Slot

  Inserting/Removing the Battery and Card Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( = 367). The number of possible shots varies depending on the remaining capacity of the card, the settings of image quality, ISO speed, etc.

• Page 45: Using The Screen

  Using the Screen You can change the direction and angle of the screen. Flip out the screen. Hold at the top and bottom and pull out as shown. Rotate the screen. 180° When the screen is swung out, you can rotate it up, down, or over 180°…

• Page 46: Turning On The Power

  Turning on the Power < 1 > The camera turns on. < 2 > The camera is turned off and does not function. Set the power switch to this position when not using the camera. Setting the Date, Time, and Time Zone If you turn on the power switch and the date/time/zone setting screen appears, see = 374 to set the date/time/zone.

• Page 47
  Turning on the Power Battery Level Indicator : Battery level is sufficient. : Battery level is low, but the camera can still be used. : Battery will be exhausted soon. (Blinks) : Charge the battery. Doing any of the following will exhaust the battery faster: •…

• Page 48: Attaching And Detaching A Lens

  Attaching and Detaching a Lens Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.

• Page 49
  Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the adapter until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens.

• Page 50: Attaching And Detaching Ef/Ef-S Lenses

  Attaching and Detaching EF/EF-S Lenses All EF and EF-S lenses can be used by attaching the optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.

• Page 51
  Attaching and Detaching EF/EF-S Lenses Set the lens’s focus mode switch to <AF>. <AF> stands for autofocus. <MF> stands for manual focus. Autofocus will not operate. Remove the front lens cap. Detaching the Lens While pressing the lens release button, turn the adapter as shown by the arrow.

• Page 52: Using The Viewfinder

  Using the Viewfinder Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( = 394). Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right to make the viewfinder display look sharp.

• Page 53: Basic Operations

  Basic Operations Holding the Camera Viewing the Screen as You Shoot As you shoot, you can tilt the screen to adjust it. For details, see = 45. Normal angle Low angle High angle Shooting Through the Viewfinder To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1.

• Page 54
  Basic Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the screen or in the viewfinder for approx.
• Page 55
  Basic Operations < p > AF Start Button In Creative Zone modes, has the same effect as pressing the shutter button halfway. < B > Multi-Function Button By pressing the < B > button and turning the < 5 > dial, you can set the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
• Page 56
  Basic Operations < 6 > Main Dial (1) After pressing a button, turn the <6> dial. Press a button such as < B >, then turn the < 6 > dial. If you press the shutter button halfway, the camera will go back to shooting-ready state.
• Page 57
  Basic Operations < 5 > Quick Control Dial (1) After pressing a button, turn the <5> dial. Press a button such as < B >, then turn the < 5 > dial. If you press the shutter button halfway, the camera will go back to shooting-ready state.

• Page 58: Multi-Function Lock

  Basic Operations < R > Multi-Function Lock Switch To avoid accidentally changing settings from the Main dial, Quick control dial, control ring, or touch-screen panel, configure [ 5 : Multi function lock] and set the < R > switch to < R >. For [ 5 : Multi function lock] details, see = 407.

• Page 59
  Basic Operations INFO Button Each press of the < B > button changes the information shown. The following sample screens are for still photos.

• Page 60: Menu Operations And Settings

  Menu Operations and Settings < M > button < 0 > button < B > button Quick control dial Screen Main dial < V > cross keys Basic Zone Modes Menu Screen * In Basic Zone modes, some tabs and menu items do not appear.

• Page 61
  Menu Operations and Settings Creative Zone Modes Menu Screen Main tabs 5 : Set-up Secondary tabs 8 : Custom Functions Menu items 9 : My Menu z : Shooting Menu settings 3 : Playback Menu Setting Procedure Display the menu screen. Press the <…
• Page 62
  Menu Operations and Settings Select an item. Turn the < 5 > dial to select an item, then press < 0 >. Select an option. Turn the < 5 > dial to select an option. The current setting is indicated in blue. Set an option.
• Page 63
  Menu Operations and Settings Dimmed Menu Items Example: Highlight tone priority Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <…

• Page 64: Touch-Screen Operation

  Touch-Screen Operation You can operate the camera by tapping or dragging on the screen (touch- screen panel) with your finger. Sample screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the screen. For example, when you tap on [ Q ], the Quick Control screen appears.

• Page 65: Quick Control

  Quick Control You can directly select and set the settings displayed on the screen. This is called Quick Control (except in < A > mode). Press the <Q> button (7). Select a setting item. Press the < W > < X > keys for selection. When the screen at left is displayed, press the <…

• Page 67: Basic Shooting

  Basic Shooting This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically.

• Page 68: Fully Automatic Shooting (Scene Intelligent Auto)

  Fully Automatic Shooting (Scene Intelligent Auto) < A > is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( = 71).

• Page 69
  Fully Automatic Shooting (Scene Intelligent Auto) Focus on the subject. Press the shutter button halfway to focus. You can also focus by touching a person’s face or another subject on the screen (Touch AF) when [ z : Continuous AF] is set to [Disable]. Under low light, the AF-assist beam ( = 201) is automatically activated if needed.
• Page 70
  The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake. Using a tripod or a Canon EL/EX series Speedlite (sold separately, = 220) is recommended. When the external flash was used, the bottom part of the picture came out unnaturally dark.

• Page 71: Full Auto Techniques (Scene Intelligent Auto)

  Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.

• Page 72
  Full Auto Techniques (Scene Intelligent Auto) Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. For icon details, see = 595. Adjusting Settings by Touching the Screen By touching icons, you can adjust settings for drive mode, image quality, Touch…
• Page 73
  Full Auto Techniques (Scene Intelligent Auto) Shooting with Effects Applied (Creative Assist) You can shoot with your selected effects applied. Press the <Q> button. Read the message and select [OK]. Select an effect. Use the < Y > < Z > keys to select an effect, then press <…
• Page 74
  Full Auto Techniques (Scene Intelligent Auto) [ ] Brightness Adjust image brightness. [ ] Contrast Adjust contrast. [ ] Saturation Adjust the vividness of colors. ] Color tone 1 Adjust amber/blue color tone. ] Color tone 2 Adjust green/magenta color tone. ] Monochrome Set the toning effect for monochrome shooting.

• Page 75: Special Scene Mode

  Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * < 8 > stands for Special Scene. Set the Mode dial to <8>. Press the <0> button. Select a shooting mode.

• Page 76
  Special Scene Mode Available Shooting Modes in the 8 Mode Shooting mode Page Shooting mode Page 2 Portrait = 77 Close-up = 84 q Group Photo = 78 Food = 85 3 Landscape = 79 Night Portrait = 86 5 Sports = 80 Handheld Night Scene = 87…

• Page 77: Shooting Portraits

  Shooting Portraits The < 2 > (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look.

• Page 78: Shooting Group Photos

  Shooting Group Photos Use the < q > (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.

• Page 79: Shooting Landscapes

  Shooting Landscapes Use the < 3 > (Landscape) mode for expansive scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus.

• Page 80: Shooting Moving Subjects

  Shooting Moving Subjects Use the < 5 > (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance.

• Page 81: Photographing Children

  Photographing Children To photograph the children running around, use < C > (Kids). Skin tones will look healthy. Shooting Tips Track the subject with the Area AF frame. By default, [ z : AF method] is set to [ u +Tracking]. An Area AF frame (1) appears when you press the shutter button halfway.

• Page 82: Panning

  Panning If you want to take a picture with the feel of speed and a blurred motion effect on the subject’s background, use < r > (Panning). If you use a lens supporting the < r > mode, subject blur is detected, corrected, and reduced.

• Page 83
  If the subject blur is noticeable, set [Effect] to [Med] or [Min] to reduce the blur. For details on lenses compatible with < r > mode, visit the Canon website. With lenses that support < r > mode, the camera automatically corrects subject blur and (based on the [Effect] setting) adjusts shutter speed, regardless of the lens IS setting.

• Page 84: Shooting Close-Ups

  Shooting Close-ups When you want to shoot flowers or small things up close, use the < 4 > (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better.

• Page 85: Shooting Food

  Shooting Food When you want to take pictures of food, use < P > (Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone.

• Page 86: Shooting Night Portraits (With A Tripod)

  Shooting Night Portraits (With a Tripod) When you want to photograph people at night and obtain a natural-looking night scene in the background, use the < 6 > (Night Portrait) mode. Note that an external Speedlite is required for shooting. Using a tripod is recommended.

• Page 87: Shooting Night Scenes (Handheld)

  Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the < F > (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded.

• Page 88: Shooting Backlit Scenes

  Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the < G > (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting.

• Page 89: Shooting Quiet Scenes

  Shooting Quiet Scenes Where silence is needed, you can shoot without beeps such as shutter release sounds. Shooting Tips Take some test shots. It is recommended to take a few test shots in advance, because under some shooting conditions, lens aperture adjustment may be audible. As you shoot, a white frame is momentarily displayed around the screen.

• Page 90: Cautions For The Modes

  Cautions for the <SCN> Modes q : Group Photo The angle of view changes slightly, due to distortion correction. Depending on the shooting conditions, focus may not be attained for everyone from the front to the back of the image. 5 : Sports Under low light where camera shake tends to occur, the shutter speed value in the lower left will blink.

• Page 91
  Cautions for the <SCN> Modes r : Panning (continued) With a lens supporting the < r > mode, subject blur may not be corrected properly when shooting the following subjects or under the following shooting conditions. • Subjects with very low contrast. •…
• Page 92
  Cautions for the <SCN> Modes 6 : Night Portrait Tell subjects to remain still for a moment after the flash fires. Focusing may be difficult when subject faces look dark. In this case, set the lens’s focus mode switch to <MF> and focus manually. Autofocusing at night or in dark scenes may be difficult when points of light lie within the AF point.
• Page 93
  Cautions for the <SCN> Modes F : Handheld Night Scene (continued) If you shoot a moving subject, the subject’s movement may leave afterimages or the surrounding area of the subject may become dark. The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake.

• Page 95: Creative Zone

  Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the shooting mode description displayed when you turn the Mode dial, press < 0 > ( = 369). Make sure the Multi-function lock feature is off.

• Page 96: Program Ae

  Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * < d > stands for Program. * AE stands for Auto Exposure. Set the Mode dial to <d>. Focus on the subject.

• Page 97
  Program AE If the “30″” shutter speed and the lowest f/number blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/4000” shutter speed and the highest f/number blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.

• Page 98: Shutter-Priority Ae

  Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.

• Page 99
  Shutter-Priority AE If the lowest f/number blinks, it indicates underexposure. Turn the < 6 > dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the highest f/number blinks, it indicates overexposure. Turn the <…

• Page 100: Aperture-Priority Ae

  Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.

• Page 101: Depth-Of-Field Preview

  Aperture-Priority AE If the “30″” shutter speed blinks, it indicates underexposure. Turn the < 6 > dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. If the “1/4000” shutter speed blinks, it indicates overexposure.

• Page 102: Manual Exposure

  Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. This method is called manual exposure. * < a > stands for Manual. Set the Mode dial to <a>.

• Page 103
  Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation ( = 128) as follows: Touch the exposure level indicator [ z : Expo.comp./AEB] Quick Control screen If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture.

• Page 104: Flexible-Priority Ae

  Flexible-Priority AE In this mode, you can set shutter speed, aperture, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in < t > mode, with control over each of these parameters, is equivalent to shooting in < d >, < s >, < f >, or < a > mode.

• Page 105
  Flexible-Priority AE Combinations of Functions in < t > Mode Shutter Exposure Aperture ISO Speed Shooting Mode Speed Compensation [AUTO] [AUTO] [AUTO] Available Similar to < d > Manual selection [AUTO] Manual [AUTO] Available Similar to < s > Manual selection selection [AUTO]…

• Page 106: Long (Bulb) Exposures

  Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This photographic technique is called “bulb exposure”. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.

• Page 107: Bulb Timer

  Long (Bulb) Exposures With [ z Long exp. noise reduction], you can reduce the noise generated during long exposures ( = 159). For bulb exposures, using a tripod and bulb timer is recommended. You can also shoot bulb exposures by using Remote Switch RS-60E3 (sold separately, = 219).

• Page 108
  Long (Bulb) Exposures Set the desired exposure time. Select the hour, minute, or second. Press < 0 > to display < r >. Set the desired number, then press < 0 >. (Returns to < s >.) Select [OK]. Take the picture. Press the shutter button completely, and the bulb exposure will start and continue until the set time elapses.

• Page 109: Shooting

  Shooting This chapter describes shooting and introduces menu settings on the shooting ([ z ]) tab.

• Page 110: Shooting Still Photos

  Shooting Still Photos A M icon to the right of a page title indicates that the function is available only in Creative Zone < t >, < d >, < s >, < f >, < a >, or < F > mode.

• Page 111: Tab Menus: Still Photo Shooting

  Tab Menus: Still Photo Shooting Shooting 1 = 116 = 119 = 122 = 182 Shooting 2 = 123 = 222 Shooting 3 = 129 = 131 = 286 = 136 = 137 = 138 = 139…

• Page 112
  Tab Menus: Still Photo Shooting Shooting 4 = 140 = 143 = 145 = 147 = 148, 152, 155 Shooting 5 = 159 = 157 = 161 = 163 = 165 = 171 = 202 Shooting 6 = 176 = 106 = 179 = 181…
• Page 113
  Tab Menus: Still Photo Shooting Shooting 7 = 185 = 188 = 198 = 199 = 183 Shooting 8 = 200 = 201 = 216 Shooting 9 = 249 = 257 = 260 = 280 = 288…
• Page 114
  Tab Menus: Still Photo Shooting In Basic Zone modes, the following screens are displayed. Shooting 1 = 76 = 116 = 122 = 182 Shooting 2 = 73 = 163 = 176 Shooting 3 = 188 = 198 = 199 = 183 [Shooting mode] and [AF method] are available in <…
• Page 115
  Tab Menus: Still Photo Shooting Shooting 4 = 201 = 71 = 216 Shooting 5 = 249 = 257 = 260 = 280 [MF peaking settings] is available in < 8 > mode. [ A Auto servo] is available in < A > mode.

• Page 116: Setting Image Quality

  Setting Image Quality You can select the pixel count and the image quality. JPEG image quality options include 73 , 83 , 74 , 84 , 7a , 8a , and b . RAW image quality options include 1 and F . Select [z: Image quality].

• Page 117
  If a previous version of DPP Ver.4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it ( = 554). (The previous version will be overwritten.) Note that DPP Ver.3.x or earlier cannot process RAW images taken with this camera.
• Page 118
  Setting Image Quality Maximum Burst for Continuous Shooting The approximate maximum burst is shown on the shooting screen and in the lower right of the viewfinder. If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously.

• Page 119: Setting Cropping/Aspect Ratio

  Setting Cropping/Aspect Ratio Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0 mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6x (APS-C size) as if using a telephoto lens, or you can set an aspect ratio to suit your shooting application before shooting.

• Page 120
  Setting Cropping/Aspect Ratio Take the picture. Setting examples When [1.6x (crop)] is set or an EF-S Y set lens is used, an image magnified approx. 1.6x is displayed. When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked is captured.
• Page 121
  Setting Cropping/Aspect Ratio Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses. The [ z : z Cropping/aspect ratio] setting is not used as the basis for auto flash zoom (auto flash coverage adjustment) by an external Speedlite. For details on pixel counts when cropping or an aspect ratio is set, see = 584.

• Page 122: Setting The Image Review Time

  Setting the Image Review Time You can set how long the image is displayed on the screen immediately after shooting. To keep the captured image displayed, set [Hold]. To not have the captured image displayed, set [Off]. Select [z: Image review]. Set a time option.

• Page 123: Correction Of Lens Aberrations Due To Optical Characteristics

  Correction of Lens Aberrations due to Optical Characteristics Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [z: Lens aberration correction]. Select an item. Select [Enable].

• Page 124
  ( = 161) appended. For details on lenses you can use to record movies with distortion correction, visit the Canon website. Distortion is corrected automatically when < 8 > mode is set to < q > and correction data is registered on the camera.
• Page 125
  Correction of Lens Aberrations due to Optical Characteristics Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of clarity. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera.
• Page 126
  Correction of Lens Aberrations due to Optical Characteristics Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is enabled. Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. Depending on shooting conditions, noise may be intensified together with the effects of correction.
• Page 127
  JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.

• Page 128: Setting The Desired Exposure Compensation

  Setting the Desired Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the < t >, < d >, < s >, < f >, and <…

• Page 129: Auto Exposure Bracketing (Aeb)

  Auto Exposure Bracketing (AEB) By changing the shutter speed, aperture, or ISO speed automatically, you can bracket the exposure up to ±3 stops in 1/3-stop increments for three consecutive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. Select [z: Expo.comp./AEB].

• Page 130
  Auto Exposure Bracketing (AEB) If [ z : Auto Lighting Optimizer] ( = 136) is set to any setting other than [Disable], the effect of AEB may be reduced. < A > blinks in the lower left of the screen during AEB shooting. If the drive mode is set to <…

• Page 131: Setting The Iso Speed For Still Photos

  Setting the ISO Speed for Still Photos Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. Regarding the ISO speed during movie recording, see = 588. Press the <B>…

• Page 132
  Setting the ISO Speed for Still Photos ISO Speed Guide Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise.
• Page 133
  Setting the ISO Speed for Still Photos Setting the Manually-Settable ISO Speed Range You can set the manually-settable ISO speed range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to H1 (equivalent to ISO 51200), and the maximum limit within ISO 100 to H2 (equivalent to ISO 102400).
• Page 134
  Setting the ISO Speed for Still Photos Setting the ISO Speed Range for ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–40000. Select [Auto range]. Set the minimum limit. Select the minimum limit box, then press <…
• Page 135
  Setting the ISO Speed for Still Photos Setting the Minimum Shutter Speed for ISO Auto You can set the minimum shutter speed for ISO Auto. This can help reduce camera shake and subject blur in < d > or < f > mode when shooting moving subjects with a wide-angle lens, or when using a telephoto lens.

• Page 136: Auto Correction Of Brightness And Contrast

  Auto Correction of Brightness and Contrast Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. This function is called Auto Lighting Optimizer. In Basic Zone modes, [Standard] is set automatically. Select [z: Auto Lighting Optimizer].

• Page 137: Highlight Tone Priority

  Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [z: Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother.

• Page 138: Setting The Metering Timer

  Setting the Metering Timer You can set how long the metering timer runs (which determines the duration of exposure display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. Select [z: Metering timer]. Set a time option.

• Page 139: Exposure Simulation

  Exposure Simulation Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. Select [z: Expo. simulation]. Set an option. Enable ( g ) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly.

• Page 140: Setting The White Balance

  Setting the White Balance White balance (WB) is for making the white areas look white. Normally, the Auto [ Q ] (Ambience priority) or [ Q w] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.

• Page 141
  Setting the White Balance (Approx.) Display Mode Color Temperature (K: Kelvin) Auto (Ambience priority, = 142) 3000–7000 Auto (White priority, = 142) Daylight 5200 Shade 7000 Cloudy, twilight, sunset 6000 Tungsten light 3200 White fluorescent light 4000 Flash Automatically set* Custom ( = 143) 2000–10000 Color temperature ( = 144)
• Page 142
  Setting the White Balance [ Q ] Auto White Balance With [ Q ] (Ambience priority), you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [ Q w] (White priority), you can reduce the intensity of the image’s warm color cast.
• Page 143
  Setting the White Balance [ O ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Shoot a white object.
• Page 144
  Setting the White Balance If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. The following images cannot be selected: Images captured with the Picture Style set to [Monochrome], multiple-exposure images, cropped images, and images shot with another camera.

• Page 145: White Balance Correction

  White Balance Correction You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels.

• Page 146
  White Balance Correction White Balance Auto Bracketing White balance bracketing (WB Bkt.) enables you to capture three images at once with different color tones. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias.

• Page 147: Setting The Color Space

  Setting the Color Space The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. Select [z: Color space]. Set a color space option.

• Page 148: Selecting A Picture Style

  Selecting a Picture Style Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. In Basic Zone modes, [ D ] (Auto) is set automatically. Select [z: Picture Style]. Select a Picture Style.

• Page 149
  Selecting a Picture Style Picture Style Characteristics [ D ] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor and sunset scenes. If the desired color tone is not obtained with [Auto], use another Picture Style.
• Page 150
  Selecting a Picture Style [ U ] Faithful Suited for processing the image with a computer. The color of a subject that is captured in sunlight at a color temperature of 5200K will be adjusted to match the subject’s colorimetrical color. For subdued images with modest brightness and color saturation.
• Page 151
  Selecting a Picture Style Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other settings. The numbers indicate the values for these settings specified for the respective Picture Style. Symbols Sharpness Strength…

• Page 152: Customizing A Picture Style

  Customizing a Picture Style You can customize the Picture Styles. You can adjust Picture Style settings such as [Contrast] or [Sharpness] ([Strength], [Fineness], and [Threshold]). To customize [Monochrome], see = 154. Select [z: Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then press the <…

• Page 153
  Customizing a Picture Style Set the effect level. Press the < M > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue. Settings and Effects Sharpness A Strength 0: Weak outline emphasis…
• Page 154
  Customizing a Picture Style [ V ] Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. [ k ] Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.

• Page 155: Registering A Picture Style

  Registering a Picture Style You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when creating several Picture Styles with different settings.

• Page 156
  Registering a Picture Style Select an item. Set the effect level. For details, see “Customizing a Picture Style” ( = 152). Press the < M > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def.

• Page 157: Setting Noise Reduction

  Setting Noise Reduction High ISO Speed Noise Reduction This function reduces the noise generated in the image. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced.

• Page 158
  Setting Noise Reduction Cautions for Setting Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended.
• Page 159
  Setting Noise Reduction Long Exposure Noise Reduction For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. Select [z: Long exp. noise reduction]. Set a reduction option. [AUTO] Automatic For exposures of 1 sec.
• Page 160
  Setting Noise Reduction With [Auto] or [Enable] set, the noise reduction process after the picture is taken may take the same amount of time as that for the exposure. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting.

• Page 161: Appending Dust Delete Data

  Appending Dust Delete Data Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically.

• Page 162
  Appending Dust Delete Data Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera.

• Page 163: Shooting With The Touch Shutter

  Shooting with the Touch Shutter Just by tapping on the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ y ] on the screen’s bottom left. Each time you tap on the icon, it will toggle between [ y ] and [ x ].

• Page 164
  Shooting with the Touch Shutter Even if you set the drive mode to < o > or < i >, the camera will still shoot in the single shooting mode. Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF].

• Page 165: Multiple Exposures

  Multiple Exposures As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. Select [z: Multiple exposure]. Set a [Multiple exposure] option. Select [Enable]. To exit shooting multiple exposures, select [Disable]. Set [Multi-expos ctrl]. Additive The exposure of each single image captured is added cumulatively.

• Page 166
  Multiple Exposures Set the [No. of exposures]. Select the number of exposures, then press < 0 >. You can set it from 2 to 9 exposures. Set a [Continue Mult-exp] option. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends.
• Page 167
  Multiple Exposures The image quality, ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first single exposure will also be set for the subsequent exposures. If [ z : Picture Style] is set to [Auto], [Standard] will be applied for shooting. With multiple exposures, the more exposures there are, the more noticeable the noise, irregular colors, and banding will be.
• Page 168
  Multiple Exposures Merging Multiple Exposures with an Image Recorded on the Card You can select a RAW image recorded on the card as the first single exposure. The image data of the selected RAW image will remain intact. Only 1 or F images can be used. JPEG images cannot be selected.
• Page 169
  Multiple Exposures The ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first image will also be applied for the subsequent images. If Picture Style is [Auto] for the image selected as the first image, [Standard] will be applied for shooting.
• Page 170
  Multiple Exposures Are there any restrictions on the image quality? All single exposures and the multiple-exposure image are captured at your specified image quality. Can I merge images recorded on the card? With [Select image for multi. expo.], you can select the first single exposure from the images recorded on the card ( = 168).

• Page 171: Hdr (High Dynamic Range) Shooting

  HDR (High Dynamic Range) Shooting You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically.

• Page 172
  HDR (High Dynamic Range) Shooting Effects [ P ] Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. [ A ] Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting.
• Page 173
  HDR (High Dynamic Range) Shooting Set a [Continuous HDR] option. With [1 shot only], HDR shooting will be canceled automatically after the shooting ends. With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. Set [Auto Image Align].
• Page 174
  HDR (High Dynamic Range) Shooting RAW HDR images are captured in JPEG 73 image quality. RAW+JPEG HDR images are captured in the specified JPEG image quality. HDR shooting is not possible with expanded ISO speeds (L, H1, H2). HDR shooting is possible within ISO 100–40000 (varies depending on the settings of [Minimum] and [Maximum] for [ISO speed range]).
• Page 175
  HDR (High Dynamic Range) Shooting When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information ( = 352) and Dust Delete Data ( = 161) will not be appended to the image. If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered.

• Page 176: Interval Timer Shooting

  Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. Select [z: Interval timer]. Select [Enable].

• Page 177
  Interval Timer Shooting Select [OK]. The interval timer settings will be displayed on the menu screen. (1) Interval (2) Number of shots Take the picture. First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting, < H > will blink.
• Page 178
  Interval Timer Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Setting the lens focus mode switch to <AF> prevents the camera from shooting unless subjects are in focus.

• Page 179: Reducing Flicker

  Reducing Flicker If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result.

• Page 180
  Reducing Flicker In the < t >, < d >, or < f > mode, if the shutter speed changes during continuous shooting or if you shoot multiple shots of the same scene at different shutter speeds, the color tone may become inconsistent. To avoid inconsistent color tones, use <…

• Page 181: Selecting The Display Speed For High-Speed Continuous Shooting

  Selecting the Display Speed for High- Speed Continuous Shooting High-speed display that switches between your shot and the live image is available when shooting with an RF lens, with [ z : AF operation] set to [Servo AF], and with the drive mode set to < o > [High speed continuous].

• Page 182: Card Reminder

  Card Reminder You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. Select [z: Release shutter without card]. Select [Disable].

• Page 183: Setting Touch & Drag Af

  Setting Touch & Drag AF You can move the AF point or Zone AF frame by touching or dragging on the screen as you look through the viewfinder. Enabling Touch & Drag AF Select [z: Touch & drag AF settings]. Select [Touch &…

• Page 184
  Setting Touch & Drag AF Active Touch Area You can specify the area of the screen used for touch and drag operations. Set the active touch area. Touching the screen when [ u +Tracking] is set displays a round orange frame <…

• Page 185: Selecting The Af Operation

  Selecting the AF Operation You can select the AF operation characteristics to suit the shooting conditions or subject. Select [z: AF operation]. Select an item. If focus cannot be achieved, the AF point will turn orange. If this occurs, the picture cannot be taken even if the shutter button is pressed completely.

• Page 186
  Selecting the AF Operation One-Shot AF for Still Subjects (ONE SHOT) Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound.
• Page 187
  Selecting the AF Operation AF-Assist Beam The AF-assist beam may fire repeatedly when you press the shutter button halfway under low light or in similar conditions, to make autofocusing easier. The AF-assist beam does not fire when [ z : AF operation] is set to [Servo AF].

• Page 188: Selecting The Af Method

  Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In < A > mode, [ u +Tracking] is set automatically. For instructions on selecting an AF method, see = 190.

• Page 189
  Selecting the AF Method : Expand AF area (Z) Focusing uses one AF point < S > and points above, below, and to the left and right < w >. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Zone AF.
• Page 190
  Selecting the AF Method Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see = 214. Select [z: AF method]. Select an item. In < A > mode, [ u +Tracking] is set automatically. In <…
• Page 191
  Selecting the AF Method u (face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point < p > also moves to track the face. Check the AF point. < p > (an AF point) appears over any face detected.
• Page 192
  Selecting the AF Method Tapping a Face for Focus Tapping a face or subject to focus on changes the AF point to < > and focuses where you tap. Even if the face or subject moves on the screen, the AF point < > moves to track it.
• Page 193
  Selecting the AF Method Spot AF / 1-point AF / Expand AF area ( Z ) / Expand AF area: Around / Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. Check the AF point.
• Page 194
  Selecting the AF Method Focus on the subject. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange.

• Page 195: Magnified View

  Selecting the AF Method Magnified View You can check the focus by magnifying display by approx. 5× or 10×. Magnified view is not possible with [ u +Tracking]. Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area ( Z )], and [Expand AF area: Around] and is centered on the Zone AF frame for [Zone AF].

• Page 196
  Selecting the AF Method Notes for AF AF Operation Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change during autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease.
• Page 197
  Selecting the AF Method Shooting Conditions that Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction.

• Page 198: Focusing On People’s Eyes

  Focusing on People’s Eyes With the AF method set to [ u +Tracking], you can shoot with the subject’s eyes in focus. Select [z: Eye Detection AF]. Select [Enable]. Aim the camera at the subject. An AF point is displayed around their eye. You can tap the screen to select an eye for focus.

• Page 199: Setting Continuous Af

  Setting Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [z: Continuous AF]. Select [Enable]. Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.

• Page 200: Setting Lens Electronic Mf

  Setting Lens Electronic MF For RF, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. Select [z: Lens electronic MF]. Select an item. ] Disable after One-Shot Manual focus adjustment after the AF operation is disabled. ] One-Shot→enabled You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway.

• Page 201: Setting Af-Assist Beam Firing

  Setting AF-Assist Beam Firing You can specify how the AF-assist beam is used on the camera or a Speedlite. Select [z: AF-assist beam firing]. Select an item. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire AF- assist beams from the camera and external flash units.

• Page 202: Focus Bracketing

  Focus Bracketing Focus bracketing* enables continuous shooting with the focal distance changed automatically after a single shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software).

• Page 203
  Focus Bracketing Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Because larger aperture values increase the focus shift, focus bracketing covers a wider range under the same [Focus increment] and [Number of shots] settings in that case.
• Page 204
  Focus Bracketing Focus bracketing is intended for still photo shooting on a tripod. Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. The following lenses can be used (as of October 2018). •…
• Page 205
  Focus Bracketing Use of a tripod, remote switch (sold separately, = 219), or wireless remote control (sold separately, = 217) is recommended. For best results, set the aperture value in a range of f/5.6–11 before shooting. Details such as shutter speed, aperture value, and ISO speed are determined by conditions for the first shot.

• Page 206: Selecting The Drive Mode

  Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Press the <B> button (9). With an image displayed on the screen, press the < B > button. Select the drive mode item.

• Page 207
  Selecting the Drive Mode With Servo AF shooting: When [AF operation] is set to [Servo AF], the continuous shooting speed of max. approx. 4.0 shots/sec. will be given priority. In flash photography: With EL or EX series Speedlites, the continuous shooting speed will be max.
• Page 208
  Selecting the Drive Mode Approx. 5.0 shots/sec. is the maximum < o > high-speed continuous shooting speed ( = 206) under these conditions: shooting with a fully charged battery in One-Shot AF mode at a 1/500 sec. or faster shutter speed and maximum aperture (depending on the lens), Image Stabilizer off (depending on the lens), at room temperature (23°C / 73°F), with flicker reduction, and Digital Lens Optimizer disabled.

• Page 209: Using The Self-Timer

  Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Press the <B> button (9). With an image displayed on the screen, press the < B > button. Select the drive mode item. Turn the <…

• Page 210
  Using the Self-Timer Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx.

• Page 211: Selecting The Metering Mode

  Selecting the Metering Mode You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically. Press the <Q> button (7). With an image displayed, press the < Q > button. Select the metering mode.

• Page 212
  Selecting the Metering Mode By default, the camera will set the exposure as follows. With [ q ] (Evaluative metering), holding down the shutter button halfway will lock the exposure setting (AE lock) after focus is achieved with One-Shot AF. In the [ w ] (Partial metering), [ r ] (Spot metering), and [ e ] (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken.

• Page 213: Locking The Exposure For Shooting (Ae Lock)

  Locking the Exposure for Shooting (AE Lock) You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the < A > button to lock the exposure, then recompose and take the picture.

• Page 214: Focusing Manually

  Focusing Manually If focusing is not possible with autofocus, you can magnify the image and focus manually. Set the lens’s focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Determine an area to magnify. Press the < S > button to activate magnified display, then move it to where you want to focus by using the <…

• Page 215
  Focusing Manually Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After focusing, press the < B > button or < 0 > to return to the normal view. Take the picture. Even with manual focusing, you can use the Touch Shutter to take a picture.

• Page 216: Mf Peaking Settings

  Focusing Manually Setting MF Peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection (except in < A > mode). Select [z: MF peaking settings].

• Page 217: Remote Control Shooting

  Remote Control Shooting Wireless Remote Control BR-E1 (sold separately) compatible with ® Bluetooth low energy technology enables remote control shooting. Pairing To use BR-E1, you must first pair (connect and register) the camera and remote control. For pairing instructions, see = 399. Do the following after the devices are paired.

• Page 218
  Remote Control Shooting Take the picture. By pressing the < 2 > button on the remote control, you can also autofocus. To shoot, press the release button on the remote control. For detailed shooting instructions, refer to the BR-E1 instruction manual. You cannot use infrared remote control units such as Remote Controller RC-6.

• Page 219: Using A Remote Switch

  Using a Remote Switch You can shoot by connecting Remote Switch RS-60E3 (sold separately). For operating instructions, refer to the remote switch instruction manual. Open the terminal cover. Connect the plug to the remote control terminal.

• Page 220: Flash Photography

  Flash Photography EL/EX Series Speedlites for EOS Cameras Using an EL/EX series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EL/EX series Speedlite’s Instruction Manual. This camera is a Type-A camera that can use all the features of EL/EX series Speedlites.

• Page 221
  Non-Canon Flash Units Sync Speed The camera can synchronize with non-Canon compact flash units at up to 1/180 sec. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Before shooting, confirm that flash is synced correctly at approx.

• Page 222: Setting The Flash Function

  Setting the Flash Function With an EL/EX series Speedlite having compatible flash function settings, you can use the camera’s menu screen to set the Speedlite’s functions and Custom Functions. Attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the Speedlite’s functions, refer to the Speedlite’s Instruction Manual.

• Page 223
  Setting the Flash Function Flash Firing To enable flash photography, set to [Enable]. To disable flash firing or enable only the AF-assist beam, set to [Disable]. Otherwise, when a Speedlite that supports auto flash firing is attached, the automatic firing is performed according to the shooting conditions. For detailed shooting instructions, refer to the instruction manual of Speedlites supporting auto flash firing.
• Page 224
  Setting the Flash Function Slow Synchro You can set the flash-sync speed for flash photography in < f > aperture-priority AE mode or < d > Program AE mode. ] 1/180-30sec. auto The flash sync speed is set automatically within a range of 1/180 sec. to 30 sec.
• Page 225
  Setting the Flash Function Safety FE To avoid overexposure from the flash firing during the day or at close range, the camera can automatically lower the ISO speed and shoot with standard subject exposure when set to ISO Auto. Flash Function Settings The information displayed, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors.
• Page 226
  Setting the Flash Function Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite’s [Flash output level] yourself.
• Page 227
  Setting the Flash Function Wireless functions / Firing ratio control Wireless (multiple) flash photography is possible with radio or optical transmission. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. With a macro flash (MR-14EX II, etc.) compatible with flash function settings, you can set the firing ratio between flash tubes or flash heads A and B, or use wireless…
• Page 228
  Setting the Flash Function Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. If [Second-curtain synchronization] is set, the flash will be fired right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night with a more natural feel.
• Page 229
  Setting the Flash Function Flash exposure compensation You can set flash exposure compensation up to ±3 stops in 1/3-stop increments. For details, refer to the Speedlite’s Instruction Manual. If flash exposure compensation is set with the Speedlite, you cannot set the flash exposure compensation with the camera.
• Page 230
  Setting the Flash Function Flash Custom Function Settings For details on the Speedlite’s Custom Functions, refer to the Speedlite’s (sold separately) Instruction Manual. Select [Flash C.Fn settings]. Set the desired functions. Select the number. Select an item. With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [TTL] (autoflash).

• Page 231: General Notes On Still Photo Shooting

  General Notes on Still Photo Shooting Information Display For details on the icons displayed for still photo shooting, see = 591. When < g > is displayed in white, it indicates that the image is displayed at the brightness level closely matching that of the actual image to be captured. If <…

• Page 232
  General Notes on Still Photo Shooting Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Defocused image areas may be incomplete when shooting near maximum aperture at high shutter speeds.
• Page 233
  General Notes on Still Photo Shooting Images and Display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Under low light, noise may be noticeable in image display even at low ISO speeds, but there will be less noise in your shots, because image quality varies between display and captured images.
• Page 234
  General Notes on Still Photo Shooting The image’s field of view coverage is approx. 100% (with image quality set to JPEG 73 ). If the camera is idle over an extended period, the screen will turn off automatically after the time set in [Display off] or [Viewfinder off] under [ 5 : Power saving].

• Page 235: Recording Movies

  Recording Movies For movie recording, set the Mode dial to < k >. A M icon to the right of a page title indicates that the function is available only for manual exposure recording ( = 241). You can record movies by pressing the movie shooting button during still photo shooting.

• Page 236: Tab Menus: Movie Recording

  Tab Menus: Movie Recording Shooting 1 = 239 = 249 = 256 = 257 = 260 Shooting 2 = 285 = 262 = 285 = 274 Shooting 3 = 128 = 286 = 136 = 287 = 288 = 138 = 289…

• Page 237
  Tab Menus: Movie Recording Shooting 4 = 142 = 143 = 145 = 148 = 157 = 290 Shooting 5 = 188 = 280 = 198 = 183 Shooting 6 = 200 = 282 = 283 = 216…
• Page 238
  Tab Menus: Movie Recording In [ u ] mode, the following screens are displayed. Shooting 1 = 239 = 257 Shooting 2 = 285 = 274 Shooting 3 = 188 = 280 = 198 = 183…

• Page 239: Recording Movies

  Recording Movies k Autoexposure Recording Autoexposure control will take effect to suit the scene’s current brightness. Set the Mode dial to <k>. Press <0>. Select [k]. Use the < W > < X > keys to select [ k (Movie auto exposure)], then press <…

• Page 240
  Recording Movies Record the movie. Press the movie shooting button to start recording a movie. While the movie is being recorded, the “ REC” mark (1) will be displayed on the upper right of the screen. Sound is recorded by the microphones at the positions indicated (2).
• Page 241
  Recording Movies M Manual Exposure Recording You can manually set the shutter speed, aperture, and ISO speed for movie recording. Set the Mode dial to <k>. Press <0>. Select [M]. Use the < W > < X > keys to select [ M (Movie manual exposure)], then press <…
• Page 242
  Recording Movies Set the shutter speed (1) and aperture (2). Press the shutter button halfway and check the exposure level indicator. To set the shutter speed, turn the < 6 > dial. To set the aperture, turn the < 5 > dial.
• Page 243
  Recording Movies For movie recording, the ISO speed cannot be expanded to L (equivalent to ISO 50). When switching from still photo shooting to movie recording, check the camera settings again before recording movies. During movie recording, avoid changing the shutter speed or aperture. Doing so may record the changes in the exposure or create more noise at high ISO speeds.
• Page 244
  Recording Movies Still Photo Shooting Still photos cannot be taken in movie recording mode. To shoot still photos, turn the Mode dial to switch to another shooting mode. Information Display (Movie Recording) For details on the icons displayed for movie recording, see = 593.
• Page 245
  Recording Movies Cautions for Movie Recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you shoot something that has fine detail, moire or false colors may result. If <…
• Page 246
  Recording Movies Notes for Movie Recording Each time you record a movie, a new movie file is created on the card. The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. You can also focus by pressing the < p > button. To enable starting or stopping movie recording by pressing the shutter button completely, set [Fully-press] for [ 5 : Shutter btn function for movies] to [Start/stop mov rec].

• Page 247: Recording Hdr Movies

  Recording HDR Movies You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. Set the Mode dial to <k>. Press <0>. Select [u]. Use the < W > < X > keys to select [ u (HDR Movie)], then press <…

• Page 248
  Recording HDR Movies [ z : Movie cropping] is not available. Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. During handheld recording, camera shake may make the distortion look more noticeable. Using a tripod is recommended. Note that even if a tripod is used for recording, afterimages or noise may become more noticeable when the HDR movie is played back frame-by-frame or in slow-motion compared to normal playback.

• Page 249: Setting The Movie Recording Size

  Setting the Movie Recording Size Under the [ z : Movie rec. size] tab, set the image size, frame rate, and compression method. The movie will be recorded as an MP4 file. The frame rate displayed on the [Movie rec. size] screen switches automatically depending on the [ 5 : Video system] setting ( = 378).

• Page 250
  Setting the Movie Recording Size If you change the [ 5 : Video system] setting, also set [ z : Movie rec. size] again. Normal playback of 4K and L8 / 7 movies may not be possible on other devices, because playback is processing-intensive. Clarity and noise vary slightly depending on movie recording size, cropped shooting settings, and the lens used.
• Page 251
  Setting the Movie Recording Size Movie-Recording Coverage Image sensor coverage for movies varies depending on movie recording size, cropped shooting settings, and the lens used. With EF-S lenses, movies are cropped around the center of the image. RF or EF lenses: With [ z : Movie cropping] set to [Disable] Full HD 4K time-lapse Full HD time-lapse…
• Page 252
  Setting the Movie Recording Size Frame rate (fps: frame per second) [ 8 ] 59.94fps / [ 6 ] 29.97fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). [ 7 ] 50.00fps / [ 5 ] 25.00fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
• Page 253
  Setting the Movie Recording Size Cards that Can Record Movies For details on cards you can use for various movie recording sizes, see = 585. When recording movies, use a high-capacity card with a writing/reading speed (as specified in card performance requirements) shown in the table on = 585 or higher than the standard specification.
• Page 254
  Setting the Movie Recording Size Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32.
• Page 255
  Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see = 586. Movie Recording Time Limit The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec.

• Page 256: Movie Cropping

  Movie Cropping With RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens. Recording movies with EF-S lenses has the same effect as this movie cropping feature. Select [z: Movie cropping]. Select [Enable].

• Page 257: Setting The Sound Recording

  Setting the Sound Recording You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ z : Sound recording] to set sound recording functions. Sound Recording/Sound-Recording Level Auto The sound-recording level is adjusted automatically.

• Page 258
  Setting the Sound Recording Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended.
• Page 259
  Setting the Sound Recording Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended. When connecting an external microphone or headphones to the camera, be sure to insert the plug all the way in. The camera’s built-in microphone will also record the operation sound and mechanical sound of the camera during shooting.

• Page 260: Movie Digital Is

  Movie Digital IS In-camera image stabilization electronically corrects camera shake during movie recording. This function is called “Movie digital IS”. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens with built-in optical Image Stabilizer, set the lens’s Image Stabilizer switch to <…

• Page 261
  Since Movie digital IS magnifies the image, the image looks more grainy. Noise, dots of light, etc. may also become noticeable. Certain lenses do not support Movie digital IS. For details, refer to the Canon website. For details on lenses compatible with Combination IS, visit the Canon website.

• Page 262: Recording Time-Lapse Movies

  Recording Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took.

• Page 263
  Recording Time-lapse Movies Set the shooting interval. Select [Interval] (sec.). Use the < Y > < Z > keys to set a value, then press < 0 >. Refer to [ k : Time required] (1) and [ 3 : Playback time] (2) to set the number.
• Page 264
  Recording Time-lapse Movies Select the desired movie recording size. H (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate is 29.97 fps ( 6 ) for NTSC and 25.00 fps ( 5 ) for PAL, and movies are recorded in MP4 ( C ) format with ALL-I ( W ) compression.
• Page 265
  Recording Time-lapse Movies Configure [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots.
• Page 266
  Recording Time-lapse Movies Set the beeper. Select [Beep as img taken]. If [Disable] is set, the beeper will not sound for shooting. Check the settings. (1) Time required Indicates the time required to shoot the set number of shots with the set interval.
• Page 267
  Recording Time-lapse Movies Read the message. Read the message and select [OK]. Take test shots. As with still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. Press the shutter button completely to take test shots.
• Page 268
  Recording Time-lapse Movies Press the movie shooting button. The camera will be ready to start recording a time-lapse movie. To return to step 14, press the movie shooting button again. Record the time-lapse movie. Press the < B > button and check again the “Time required (1)”…
• Page 269
  Recording Time-lapse Movies Using a tripod is recommended. Taking test shots as in step 14 and recording test movies for time-lapse movies beforehand is recommended. The movie’s field of view coverage for both the 4K and Full HD time-lapse movie recording is approx. 100%. To cancel the time-lapse movie recording in progress, either press the shutter button completely or press the movie shooting button.
• Page 270
  Recording Time-lapse Movies Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Time-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected.
• Page 271
  Recording Time-lapse Movies If the shutter speed exceeds the shooting interval (such as for long exposures), or if a slow shutter speed is set automatically, the camera may not be able to shoot at the set interval. Shooting may also be prevented by shooting intervals nearly the same as the shutter speed.
• Page 272
  Recording Time-lapse Movies If you start time-lapse movie recording while the white < s > temperature warning ( = 291) is displayed, the image quality of the time-lapse movie may decline. It is recommended that you start time-lapse movie recording after the white <…
• Page 273
  Recording Time-lapse Movies You can use Wireless Remote Control BR-E1 (sold separately) to start and stop the time-lapse movie recording. With Wireless Remote Control BR-E1 • First pair the Wireless Remote Control BR-E1 with the camera ( = 399). • Set [ z : Remote control] to [Enable]. •…

• Page 274: Recording Video Snapshots

  Recording Video Snapshots Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to L6X (NTSC) or L5X (PAL).

• Page 275
  Recording Video Snapshots Select [Album settings]. Select [Create a new album]. Read the message and select [OK]. Specify the playback time. Specify playback time per video snapshot. Specify the playback effect. This setting determines how fast albums are played back. Check the required recording time.
• Page 276
  Recording Video Snapshots Close the menu. Press the < M > button to close the menu. A blue bar is displayed to indicate the recording time (2). Go to “Creating Video Snapshot Albums”. Creating Video Snapshot Albums Record the first video snapshot. Press the movie shooting button to start recording.
• Page 277
  Recording Video Snapshots Stop recording video snapshots. Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable]. Press the < M > button to close the menu and return to normal movie recording. Options in Steps 11 and 12 Function Description Saves the clip as the first video snapshot in an…
• Page 278
  Recording Video Snapshots Adding to an Existing Album Select [Add to existing album]. Follow step 5 on = 275 to select [Add to existing album]. Select an existing album. Turn the < 5 > dial to select an existing album, then press < 0 >. Select [OK].
• Page 279
  Recording Video Snapshots General Video Snapshot Precautions No sound is recorded when you set [Playback effect] to [1/2x speed] or [2x speed]. Recording time per video snapshot is only approximate. It may differ slightly from the actual recording time indicated during playback, due to the frame rate and other factors.

• Page 280: Setting Movie Servo Af

  Setting Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. Select [z: Movie Servo AF]. Select [Enable]. When [Enable] is set: The camera focuses on the subject continuously even when you are not pressing the shutter button halfway.

• Page 281
  Setting Movie Servo AF Cautions When [Movie Servo AF] is Set to [Enable] Recording Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. •…
• Page 282
  Setting Movie Servo AF Movie Servo AF Track Sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan. Select [z: Movie Servo AF track sens.].
• Page 283
  (one of two levels) to obtain the desired effect for the movie creation. * Lenses supporting slow focus transition during movie recording USM and STM lenses released in and after 2009 are compatible. For details, refer to the Canon website.
• Page 284
  Setting Movie Servo AF With certain lenses, even if you adjust the AF speed, the speed may not change. Has no effect (setting is disabled) when 4K movie recording is set. Available when [ z : Movie Servo AF] is set to [Enable] and [ z : AF method] is set to [1-point AF].

• Page 285: Other Menu Functions

  Other Menu Functions [ z 2] Lens aberration correction Peripheral illumination, distortion, and chromatic aberration can be corrected as you record movies. For details on lens aberration correction, see = 123. Remote control shooting When [Enable] is set, you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately).

• Page 286
  Other Menu Functions [ z 3] k ISO speed settings ISO speed M In [ M ] mode, you can set the ISO speed manually. You can also select ISO Auto. ISO speed range When recording Full HD/HD movies or Full HD time-lapse movies, you can set the manual ISO speed setting range (minimum and maximum).
• Page 287
  Other Menu Functions Highlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see = 137. [Enhanced] is not available (not displayed) when recording movies with [ z : Highlight tone priority] set.
• Page 288
  Other Menu Functions k Auto slow shutter You can choose whether to shoot movies that are brighter and less affected by image noise than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ k ] shooting mode. Applies when the frame rate of the movie recording size is 8 or 7 .
• Page 289
  Other Menu Functions k Av 1/8-stop increments M You can set aperture values on a finer scale when recording movies with an RF lens. Available in [ M ] shooting mode. Select [Enable] to change the aperture increment from 1/3 stop (or 1/2 stop) to 1/8 stop.

• Page 290: Z Hdmi Output

  Other Menu Functions [ z 4] HDMI info disp You can configure information display for image output via an HDMI cable. With info The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off.

• Page 291: General Movie Recording Cautions

  General Movie Recording Cautions Red < E > Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie recording or under a high ambient temperature, a red < E > icon will appear. The red < E > icon indicates that movie recording will soon be terminated automatically.

• Page 292
  General Movie Recording Cautions Recording and Image Quality If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory).

• Page 293: Playback

  Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playback ([ x ]) tab. Images shot and saved with another device Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.

• Page 294: Tab Menus: Playback

  Tab Menus: Playback Playback 1 = 310 = 313 = 314 = 318 = 322 Playback 2 = 325 = 331 = 333 = 334 Playback 3 = 337 = 339 = 340 = 343 = 345 = 347 [ 3 : RAW image processing] and [ 3 : Quick Control RAW processing] are not displayed in Basic Zone modes.

• Page 295
  Tab Menus: Playback Playback 4 = 349 = 351 = 352 = 353 = 354 = 355…

• Page 296: Image Playback

  Image Playback Single-Image Display Play back the image. Press the < x > button. Select an image. To play back newer images, press the < Z > button, and to play back older images, press the < Y > button. Each time you press the <…

• Page 297
  Image Playback Shooting Information Display With the shooting information screen displayed, you can press the < W > < X > keys to change the information displayed. You can also customize the information displayed, in [ x : Playback information display] ( = 349).

• Page 298: Touch Playback

  Image Playback Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < x > button to prepare for touch playback.

• Page 299: Magnifying Images

  Magnifying Images You can magnify your captured images. Magnify the image. During image playback, press the < u > button. The magnified view will appear. The magnified area position (1) and [ 6u ] will be displayed on the lower right of the screen.

• Page 300: Index Display (Multiple-Image Display)

  Index Display (Multiple-Image Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. Press the <u> button. During image playback, press the < u > button. [ 6u ] will be displayed on the lower right of the screen.

• Page 301: Playing Back Movies

  Playing Back Movies Play back the image. Press the < x > button. Select a movie. Use the < Y > < Z > keys to select the movie to play back. In the single-image display, the < s1 > icon displayed on the upper left indicates a movie.

• Page 302
  Playing Back Movies Movie Playback Panel Item Playback Operations 7 Play Pressing < 0 > toggles between playback and stop. Adjust the slow motion speed with the < Y > < Z > keys. The 8 Slow motion slow motion speed is indicated on the upper right of the screen.
• Page 303
  Playing Back Movies Movie Playback Panel (Video Snapshot Albums) Item Playback Operations 7 Play Pressing < 0 > toggles between playback and stop. Adjust the slow motion speed with the < Y > < Z > keys. The 8 Slow motion slow motion speed is indicated on the upper right of the screen.

• Page 304: Editing A Movie’s First And Last Scenes

  Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. Pause movie playback. The movie playback panel will appear. On the movie playback panel, select [X]. Specify the part to be edited out. Select either [ U ] (Cut beginning) or [ V ] (Cut end).

• Page 305
  Editing a Movie’s First and Last Scenes Save the image. Select [ W ] (1). The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file.

• Page 306: Grabbing A Frame From 4K Movies Or 4K Time-Lapse Movies

  Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3-megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. Play back the image.

• Page 307
  Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies Save the image. Select [OK] to save the current frame as a JPEG still image. Select the image to display. Check the destination folder and image file number. Select [View original movie] or [View extracted still image].

• Page 308: Playback On A Tv

  Playback on a TV By connecting the camera to a television with an HDMI cable, you can play back the captured still photos and movies on the television. Using the HDMI Cable HTC-100 (sold separately) is recommended. If the image does not appear on the TV screen, check if the [ 5 : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).

• Page 309
  Playback on a TV Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. Depending on the television, part of the image displayed may be cut off. Do not connect any other device’s output to the camera’s <…

• Page 310: Protecting Images

  Protecting Images You can protect important images from being accidentally erased. Protecting a Single Image Select [3: Protect images]. Select [Select images]. Select an image. Use the < Y > < Z > keys to select the image to protect. Protect the image.

• Page 311
  Protecting Images Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ 3 : Protect images].
• Page 312
  Protecting Images Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ 3 : Protect images], all the images in the folder or on the card will be protected.

• Page 313: Rotating Images

  Rotating Images You can use this feature to rotate the displayed image to the desired orientation. Select [3: Rotate image]. Select an image. Use the < Y > < Z > keys to select the image to rotate. Rotate the image. Each time you press <…

• Page 314: Erasing Images

  Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images ( = 310) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it.

• Page 315
  Erasing Images Checkmarking [ X ] Images to Be Erased in a Batch By adding checkmarks to the images to be erased, you can erase all those images at once. Select [3: Erase images]. Select [Select and erase images]. Select an image. Use the <…
• Page 316
  Erasing Images Specifying the Range of Images to Be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ 3 : Erase images].
• Page 317
  Erasing Images Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When [ 3 : Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased.

• Page 318: Digital Print Order Format (Dpof)

  Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher.

• Page 319
  Digital Print Order Format (DPOF) Exit the setting. Press the < M > button. Next, select [Sel.Image] or [Multiple] to specify the images to be printed. If you print an image with a large image size using the [Index] or [Both] setting ( = 318), the index print may not be printed with certain printers.
• Page 320
  Digital Print Order Format (DPOF) Specifying Images for Printing Selecting Images Select and specify the images one by one. Press the < M > button to save the print order to the card. Standard / Both Press < 0 > to print a copy of the displayed image.
• Page 321
  Digital Print Order Format (DPOF) All Images in a Folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled.

• Page 322: Specifying Images For A Photobook

  Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online.

• Page 323
  Specifying Images for a Photobook Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. Select [Multiple].
• Page 324
  Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. Under [ x : Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a…

• Page 325: Processing Raw Images With The Camera

  Processing RAW Images with the Camera You can process 1 or F images with the camera to create JPEG images. RAW images are not affected, so different conditions can be applied to create JPEGs. You can also use Digital Photo Professional (EOS software) to process RAW images.

• Page 326
  Processing RAW Images with the Camera Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Customize RAW processing Use the < W > < X > < Y > < Z > keys to select an item.
• Page 327
  Processing RAW Images with the Camera Select the image to display. Select [Original image] or [Processed img.]. Magnified View You can magnify images displayed for [Customize RAW processing] by pressing the < u > button. Magnification varies depending on the [Image quality] setting.
• Page 328
  Processing RAW Images with the Camera RAW Image Processing Options ] Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. ] White balance ( = 140) You can select the white balance. If you select [ Q ], you can select [Auto: Ambience priority] or [Auto: White priority].
• Page 329
  Processing RAW Images with the Camera ] Color space ( = 147) You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. ] Lens aberration correction ] Peripheral illumination correction ( = 124) A phenomenon that makes the image corners look darker due to the…
• Page 330
  Processing RAW Images with the Camera ] Chromatic aberration correction ( = 126) Chromatic aberrations (color fringing along the subject’s outline) due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( = 299).

• Page 331: Applying Your Favorite Effects (Creative Assist)

  Applying Your Favorite Effects (Creative Assist) You can process RAW images by applying your preferred effects and saving as JPEGs. Select [3: Creative Assist]. Select an image. Use the < Y > < Z > keys to select images to process, then press < 0 >. Select an effect level.

• Page 332
  Applying Your Favorite Effects (Creative Assist) You can adjust effects such as [Brightness] or [Contrast] by pressing < 0 > and then using the < Y > < Z > keys. Press < 0 > when adjustment is finished. To reset the effect, press the < L > button.

• Page 333: Selecting The Type Of Raw Image Processing

  Selecting the Type of RAW Image Processing You can select the type of RAW image processing performed from the Quick Control screen. Select [3: Quick Control RAW processing]. Select an item. Creative Assist RAW processing that applies your preferred effect ( = 331). RAW image processing RAW processing according to conditions you specify ( = 325).

• Page 334: Editing Video Snapshot Albums

  Editing Video Snapshot Albums You can rearrange, delete, or play back the video snapshots in an album. Select [3: Create album]. Select an album to edit. Press < 0 > to add a checkmark [ X ]. After selection, press the < M > button.

• Page 335
  Editing Video Snapshot Albums Option Description Use the < Y > < Z > keys to select a video snapshot to move, T Rearrange video then press < 0 >. Use the < Y > < Z > keys to move it, then snapshots press <…
• Page 336
  Editing Video Snapshot Albums Selecting Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). Select [Background music]. Set [Background music] to [On]. Select the background music. Use the <…

• Page 337: Cropping Jpeg Images

  Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. Select [x: Cropping]. Select an image. Use the < Y > < Z > keys to select the image to crop.

• Page 338
  Cropping JPEG Images Moving the Cropping Frame Press the < V > cross keys to move the frame vertically or horizontally. Move the cropping frame until it covers the desired image area. Correcting the Tilt You can correct image tilt by ±10°. Turn the < 5 > dial to select < c >, then press <…

• Page 339: Resizing Jpeg Images

  Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3 , 4 , and a images. JPEG b and RAW images cannot be resized. Select [3: Resize].

• Page 340: Setting Ratings

  Setting Ratings You can rate images on a scale of 1–5 ( l / m / n / o / p ). This function is called rating. Rating a Single Image Select [3: Rating]. Select [Select images]. Select the image to be rated. Use the <…

• Page 341
  Setting Ratings Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ 3 : Rating]. Specify the range of images.
• Page 342
  Setting Ratings Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ 3 : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.

• Page 343: Slide Show (Auto Playback)

  Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ 3 : Set image search conditions] ( = 345).

• Page 344
  Slide Show (Auto Playback) Display time Repeat Transition effect Background music Start the slide show. Select [Start]. After [Loading image…] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the < M > button.

• Page 345: Filtering Images For Playback

  Filtering Images for Playback You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, erase, play a slide show, and apply other operations to filtered images.

• Page 346
  Filtering Images for Playback Apply the search conditions. Press < 0 > and read the message displayed. Select [OK]. The search condition is specified. Display the found images. Press the < 3 > button. Only the images that match the set conditions (filtered) will be played back.

• Page 347: Jump Display (Jumping Through Images)

  Jump Display (Jumping Through Images) In the single-image display, you can turn the < 6 > dial to jump through the images forward or backward according to the jump method set. Select [x: Image jump w/6]. Select the jump method. With [Jump images by the specified number], you can turn the <…

• Page 348
  Jump Display (Jumping Through Images) Browse by jumping. Press the < x > button. In the single-image display, turn the < 6 > dial. You can browse by the set method. (1) Jump method (2) Playback position To search images by shooting date, select [ g : Date]. To search images by folder, select [ h : Folder].

• Page 349: Customizing Playback Information Display

  Customizing Playback Information Display You can specify screens and accompanying information displayed during image playback. Select [3: Playback information display]. Add a checkmark [X] next to the number of screens to display. Use the < W > < X > keys to select a number.

• Page 350
  Customizing Playback Information Display [Brightness] display This histogram is a graph showing the distribution Sample Histograms of the image’s brightness level. The horizontal axis indicates the brightness level (darker on the left and brighter on the right) while the vertical axis indicates how many pixels exist for each Dark image brightness level.

• Page 351: Displaying The Highlight Alert

  Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result. Select [3: Highlight alert].

• Page 352: Displaying Af Points

  Displaying AF Points You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. Select [3: AF point disp.]. Select [Enable].

• Page 353: Displaying A Grid

  Displaying a Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image’s vertical or horizontal tilt as well as composition. Select [3: Playback grid]. Select an item.

• Page 354: Specifying Initial Image Display When Playback Begins

  Specifying Initial Image Display When Playback Begins You can specify which image is displayed first when you start image playback. Select [3: View from last seen]. Select an item. [Enable]: Playback resumes from the last image displayed (except when you have just finished shooting).

• Page 355: Setting The Initial Magnification Ratio And Position

  Setting the Initial Magnification Ratio and Position You can set the initial magnification ratio and position for the magnified view. Select [3: Magnificatn (apx)]. Select an item. 1x (no magnification) The image is not magnified. The magnified view will start with the single- image display.

• Page 357: Set-Up

  Set-up This chapter describes menu settings on the set-up ([ 5 ]) tab. A M icon to the right of a page title indicates that the function is available only in < t >, < d >, < s >, < f >, < a >, or < F > mode.

• Page 358: Tab Menus: Set-Up

  Tab Menus: Set-up Set-up 1 = 361 = 363 = 366 = 367 = 369 = 370 Set-up 2 = 371 = 372 = 373 = 374 = 377 Set-up 3 = 378 = 379 = 380 = 381 = 382 = 386 = 387…

• Page 359
  Tab Menus: Set-up Set-up 4 = 388 = 393 = 393 = 394 = 395 = 397 Set-up 5 = 398 = 402 Set-up 6 = 407 = 408 = 410 = 411 = 413 = 413 = 413…
• Page 360
  Tab Menus: Set-up When you are recording movies, the following screen is displayed for [ 5 4] and [ 5 6]. Set-up 4 = 388 = 393 = 394 = 395 = 397 Set-up 6 = 407 = 410 = 411 = 413 = 413 In Basic Zone and [HDR Movie] modes, the following screen is…

• Page 361: Creating And Selecting A Folder

  Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder Select [5: Select folder]. Select [Create folder]. Select [OK].

• Page 362
  Creating and Selecting a Folder Selecting a Folder Select a folder on the folder selection screen. Captured images are stored in your selected folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Folders A folder can contain up to 9999 images (file number 0001–9999).

• Page 363: File Numbering Methods

  File Numbering Methods The captured images saved in a folder are IMG_0001.JPG assigned a file number from 0001 to 9999. (Example) You can change how the image files are numbered. File number Select [5: File numbering]. Set the item. Select [Numbering]. Select [Continuous] or [Auto reset].

• Page 364
  File Numbering Methods Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
• Page 365
  File Numbering Methods Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved.

• Page 366: Setting The Auto Rotation Of Vertical Images

  Setting the Auto Rotation of Vertical Images You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [5: Auto rotate]. Select an item. On zD Automatically rotates images for display on both the camera and computers.

• Page 367: Formatting Memory Cards

  Formatting Memory Cards If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.

• Page 368
  Formatting Memory Cards Format the Card in the Following Cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( = 581). Low-Level Formatting Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.

• Page 369: Displaying The Shooting Mode Guide

  Displaying the Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. Select [5: Mode guide]. Select [Enable]. Turn the Mode dial. A brief description of the selected shooting mode is displayed. To display more details, press the <…

• Page 370: Displaying The Feature Guide

  Displaying the Feature Guide A brief description of functions and items can be displayed when you use Quick Control setting. Select [5: Feature guide]. Select [Enable]. To clear a description, either tap it or continue performing operations.

• Page 371: Setting Eco Mode

  Setting Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. Select [5: Eco mode]. Select [On]. The screen darkens when the camera is not used for approx. two seconds. Approx.

• Page 372: Setting Power-Saving Features

  Setting Power-Saving Features You can adjust the timing of when the screen, camera, and viewfinder turn off automatically (Display off, Auto power off, and Viewfinder off). Select [5: Power saving]. Select an item. Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off].

• Page 373: Adjusting The Screen Brightness

  Adjusting the Screen Brightness Screen and viewfinder brightness can be adjusted separately. Select [5: Disp. brightness]. Make the adjustment. Referring to the gray chart, use the < Y > < Z > keys to adjust the brightness, then press < 0 >. When adjusting viewfinder brightness, look through the viewfinder as you set it.

• Page 374: Setting The Date, Time, And Time Zone

  Setting the Date, Time, and Time Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow the steps below to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.

• Page 375
  Setting the Date, Time, and Time Zone Use the < Y > < Z > keys to select a [Time difference] item (+/–/hour/ minute), then press < 0 >. Use the < W > < X > keys to set it, then press <…
• Page 376
  Setting the Date, Time, and Time Zone The date, time, and time zone settings may be reset when the camera is stored without the battery, when its battery becomes exhausted, or when it is exposed to below freezing temperatures for a prolonged period. If this happens, set them once again.

• Page 377: Setting The Interface Language

  Setting the Interface Language Select [5: LanguageK]. Set the desired language.

• Page 378: Setting The Video System

  Setting the Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. Select [5: Video system]. Select an item. NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).

• Page 379: Setting The Touch Control Response

  Setting the Touch Control Response Select [5: Touch control]. Select an item. [Standard] is the normal setting. [Sensitive] provides a more reactive touch-screen panel response than [Standard]. To disable touch operations, select [Disable]. Cautions for Touch Control Operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations.

• Page 380: Disabling Beeps For Camera Operations

  Disabling Beeps for Camera Operations You can disable beeping when subjects are in focus or for other operations. Select [5: Beep]. Select an item. Touch The beeper will be silent only for touch operations. Disable Disables beeping when subjects are in focus, when you shoot with the self-timer, and when you use touch operations.

• Page 381: Checking The Battery Information

  Purchasing a new battery is recommended. Using a genuine Canon Battery Pack LP-E17 is recommended. If you use batteries that are not genuine Canon products, the camera’s full performance may not be attained or malfunction may result. If a battery communication error message is displayed, follow the instructions…

• Page 382: Sensor Cleaning

  Sensor Cleaning The camera’s sensor cleaning feature cleans the front of the image sensor. Activating Immediate Cleaning Select [5: Sensor cleaning]. Select [Clean nowf]. Select [OK] on the confirmation dialog.

• Page 383
  Sensor Cleaning Setting Auto Cleaning Select [Auto cleaningf]. Select an item. Use the < Y > < Z > keys to select an item, then press < 0 >. For best results, clean with the camera in a stable position on a desk or other flat surface.
• Page 384
  Dust that could not be removed by automatic cleaning can be removed manually with a commercially available blower or similar tool. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Setting the power switch to <2>.
• Page 385
  Never use pressurized air or gas to clean the sensor. Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.

• Page 386: Setting The Hdmi Output Resolution

  Setting the HDMI Output Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [5: HDMI resolution]. Select an item. Auto The images will automatically be displayed at the optimum resolution matching the connected television.

• Page 387: Raw Playback On An Hdr Tv

  RAW Playback on an HDR TV You can view RAW images in HDR by connecting the camera to an HDR Select [5: HDMI HDR output]. Select [On]. Image operations such as RAW processing are not available during HDR display. JPEG images are used for HDR display in the case of L (ISO 50-equivalent) images or multiple-exposure RAW images.

• Page 388: Customizing Information Displayed When Shooting

  Customizing Information Displayed When Shooting You can customize the details and screens of information shown on the camera or in the viewfinder when you shoot. Select [5: Shooting info. disp.]. Customizing Information on the Screen Select [Screen info. settings]. Select screens. Use the <…

• Page 389
  Customizing Information Displayed When Shooting Customizing Information in the Viewfinder Select [VF info/toggle settings]. Select screens. Use the < W > < X > keys to select screens of information to show in the viewfinder. For information you prefer not to display, press <…

• Page 390: Grid Display

  Customizing Information Displayed When Shooting Vertical Viewfinder Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [VF vertical display]. Select an item. Information is automatically rotated, making it easier to read. Information is not automatically rotated. Grid Display A grid can be displayed on the screen and viewfinder.

• Page 391
  Customizing Information Displayed When Shooting Setting the Histogram You can select the content and display size of the histogram. Select [Histogram disp]. Select an item. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]). Press < M > button to confirm the setting.
• Page 392
  Customizing Information Displayed When Shooting Clearing Settings You can restore [Shooting info. disp.] to the default settings. Select [Reset]. Select [OK].

• Page 393: Setting A Priority For Shooting Display Performance

  Setting a Priority for Shooting Display Performance You can select the performance option to prioritize in viewfinder display for still photos. Select [5: Viewfinder performance]. Select an item. Setting the Viewfinder Display Format You can select the viewfinder display format. Select [5: VF display format].

• Page 394: Setting The Display Mode

  Setting the Display Mode You can select the display mode for shooting screens. Select [5: Display settings]. Select an item. Auto Normally use the screen for display, but switch to the viewfinder when you look through it. Manual You can restrict display to the screen or viewfinder.

• Page 395: Customizing Shutter Button Functionality For Movie Recording

  Customizing Shutter Button Functionality for Movie Recording You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Select [5: Shutter btn function for movies]. Select an item. Half-press Specify the function performed by pressing the shutter button halfway.

• Page 396: Help

  Help When [ z Help] is displayed below a menu, you can display a description about the feature by pressing the < B > button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, press the <…

• Page 397
  Help Help Display Text Size You can change the text size for the Help display. Select [5: Help text size]. Select an item.

• Page 398: Setting Wireless Features

  Setting Wireless Features You can connect the camera to a smartphone or computer wirelessly and send your shots or control the camera remotely. Select [5: Wireless communication settings]. Set the item. For details, see “Wi-Fi (Wireless Communication) Functions”.

• Page 399
  Setting Wireless Features Shooting with a Remote Control You can shoot remotely by pairing the camera via Bluetooth with Wireless Remote Control BR-E1 (sold separately), which supports Bluetooth low energy technology. Pairing To use BR-E1, you must first pair (connect and register) the camera and remote control.
• Page 400
  Setting Wireless Features Select [Pairing]. Select [Pairing]. Press and hold the <W> button and <T> button on the BR-E1 simultaneously for 3 sec. or more. Pairing now begins. When pairing is complete, BR-E1 is registered on the camera. Set up the camera for remote shooting.
• Page 401
  Setting Wireless Features Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [5: Wireless communication settings]. Select [Bluetooth function]. Select [Check/clear connection info]. Press the <B> button. Clear the connection information. Select [OK].

• Page 402: Geotagging Images

  Make sure the GP-E2 firmware is updated to Ver. 2.0.0 or later. Firmware updating requires an interface cable. For updating instructions, visit the Canon website. The cable cannot be used to connect the camera to the GP-E2.

• Page 403
  Geotagging Images Using a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone. For details on installing Camera Connect, see = 420. Specifying the smartphone as the GPS device On the smartphone, activate location services. Establish a Bluetooth connection.
• Page 404
  Geotagging Images Select [Smartphone]. Select [Smartphone] in [Select GPS device]. Location information can now be acquired from the smartphone. To check acquired geotag information (latitude, longitude, elevation, and Coordinated Universal Time (UTC)), select [GPS information display] on the [GPS device settings] screen. Take the picture.
• Page 405
  Geotagging Images GPS connection display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo or movie shooting ( = 591 and = 593, respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired For details on how GPS connection status is indicated when the GP-E2 is…
• Page 406
  Geotagging Images The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.

• Page 407: Setting The Multi-Function Lock

  Setting the Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. Select [5: Multi function lock]. Select camera controls to lock. Press < 0 > to add a checkmark [ X ]. Select [OK].

• Page 408: Registering Custom Shooting Modes

  Registering Custom Shooting Modes You can register current camera settings, such as shooting, menu, and Custom Function settings, as Custom shooting modes assigned to < w > to < y > modes. Select [5: Custom shooting mode (C1-C3)]. Select [Register settings]. Register the desired items.

• Page 409
  Registering Custom Shooting Modes You can also change shooting and menu settings in Custom shooting modes.

• Page 410: Reverting The Camera To The Default Settings

  Reverting the Camera to the Default Settings The camera’s settings for shooting functions and menu functions can be reverted to their defaults. Select [5: Clear all camera settings]. Select [OK]. For details on clearing all Custom Function and customized control settings, see = 546.

• Page 411: Setting Copyright Information

  Setting Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Select [5: Copyright information]. Select an item. Enter text. Use the < V > cross keys or < 5 > dial to select a character, then press <…

• Page 412
  Setting Copyright Information Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.

• Page 413: Checking Other Information

  Checking Other Information Downloading instruction manuals To download instruction manuals, select [ 5 : Manual/software URL] and scan the displayed QR code with a smartphone. Note that scanning QR codes requires an app. Displaying certification logos M Select [ 5 : Certification Logo Display] to display some of the logos of the camera’s certifications.

• Page 415: Wi-Fi (Wireless Communication) Functions

  Wi-Fi (Wireless Communication) Functions ® This chapter describes how to send images via Wi-Fi from the camera to a variety of compatible devices, and how to use Web services.

• Page 416: What You Can Do Via Wi-Fi (Wireless Communication) Functions

  Canon cannot be held liable for any other loss or damage caused by use of the camera. When using wireless communication functions, establish appropriate security at your own risk and discretion. Canon cannot be held liable for any loss or damage caused by unauthorized access or other security breaches.

• Page 417
  Wi-Fi to print images. (4) R Send images to a Web service ( = 473) Share images with friends or family on social media or the CANON iMAGE GATEWAY online photo service for Canon customers after you complete member registration (free of charge).
• Page 418
  What You Can Do via Wi-Fi (Wireless Communication) Functions ® Bluetooth Features By pairing the camera with a smartphone compatible with Bluetooth low energy technology (hereafter, “Bluetooth”), you can: Control the camera remotely from a smartphone ( = 433) Establish a Wi-Fi connection from either the smartphone or the camera, by itself ( = 428, = 441) Establish a Wi-Fi connection with the camera even when it is off ( = 430) Geotag images with GPS information acquired by the smartphone…

• Page 419: Connecting To A Smartphone Via Wi-Fi

  Connecting to a Smartphone via Wi-Fi This section describes how to directly connect the camera to a smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: View images stored in the camera on a smartphone or save viewed images to a smartphone.

• Page 420
  Connecting to a Smartphone via Wi-Fi Installing Camera Connect on a Smartphone To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated app Camera Connect (free of charge) must be installed on the smartphone. Use the latest version of the smartphone OS.
• Page 421
  Connecting to a Smartphone via Wi-Fi Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Make sure Camera Connect is installed on the smartphone, and that Bluetooth and Wi-Fi are on. Steps on the Camera (1) Select [5: Wireless communication settings]. Select [Bluetooth function]. Select [Bluetooth function].
• Page 422
  Connecting to a Smartphone via Wi-Fi Register [Nickname]. When using the displayed nickname, press the < M > button. You can change the nickname ( = 497). Select [OK]. Select [Pairing].
• Page 423
  Connecting to a Smartphone via Wi-Fi Select an item. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
• Page 424
  Connecting to a Smartphone via Wi-Fi Steps on the Smartphone (1) Start Camera Connect. Select the camera to pair with. If you are using an Android smartphone, go to step 12. Tap on [Pair] (iOS only).
• Page 425
  Connecting to a Smartphone via Wi-Fi Steps on the Camera (2) Select [OK]. Press <0>. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. Pairing or Bluetooth connection is not possible if the camera is connected to a computer or another device with an interface cable.
• Page 426
  Connecting to a Smartphone via Wi-Fi Steps on the Smartphone (2) Select a Camera Connect function. In iOS, select [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see = 437. When a Wi-Fi connection is established, the screen for the selected function will appear.
• Page 427
  Connecting to a Smartphone via Wi-Fi For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” ( = 449). Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection. [ q Wi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set.
• Page 428
  Connecting to a Smartphone via Wi-Fi Connecting to a Bluetooth-connected Smartphone via Wi-Fi Start Camera Connect. Select a Camera Connect function. Select the Camera Connect function you want to use. In iOS, select [Join] when a message is displayed to confirm camera connection. When a Wi-Fi connection is established, the screen for the selected function will appear.
• Page 429
  Connecting to a Smartphone via Wi-Fi [Bluetooth function] Screen On the [Bluetooth function] screen, you can change or check the Bluetooth function settings. Bluetooth function Select the device to pair with the camera. If you will not use the Bluetooth function, select [Disable].
• Page 430
  Connecting to a Smartphone via Wi-Fi Stay conn. if off Selecting [Enable] lets you view images on the camera and control it in other ways by connecting via Wi-Fi even if the camera is off. Establishing a Wi-Fi Connection When the Camera Is Off Once the devices are paired, you can use a smartphone to connect via Wi- Fi and transfer images from the camera even when it is off.
• Page 431
  Connecting to a Smartphone via Wi-Fi Establishing a Wi-Fi Connection Start Camera Connect. Start Camera Connect on a smartphone paired with the camera via Bluetooth. Select [Images on camera]. In the Camera Connect menu, tap on [Images on camera]. In iOS, select [Join] when a message is displayed to confirm camera connection.
• Page 432
  Connecting to a Smartphone via Wi-Fi Removing a Paired Device’s Registration To pair the camera with a different smartphone, clear the paired device’s registration on the [Bluetooth function] screen ( = 429). Steps on the Camera Select [Check/clear connection info]. Press the <B>…
• Page 433
  Connecting to a Smartphone via Wi-Fi Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Steps on the Camera (1) Select [5: Wireless communication settings]. Select [Wi-Fi function]. If the [Nickname] screen is displayed, register a nickname ( = 422). Select [q] (Connect to smartphone).
• Page 434
  Connecting to a Smartphone via Wi-Fi Select an item. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or App Store and install Camera Connect.
• Page 435
  Connecting to a Smartphone via Wi-Fi Steps on the Smartphone Operate the smartphone to Smartphone’s screen (sample) establish a Wi-Fi connection. Activate the smartphone’s Wi-Fi function, then select the SSID (network name) checked in step 6. For the password, enter the password checked in step 6.
• Page 436
  Connecting to a Smartphone via Wi-Fi The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect. See = 437. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection”…
• Page 437
  Connecting to a Smartphone via Wi-Fi Operating the Camera Using a Smartphone The main functions of Camera Connect are described below. Images on camera Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operations such as deletion can be performed on images stored in the camera.
• Page 438
  Connecting to a Smartphone via Wi-Fi If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. You cannot use the camera to shoot after using Camera Connect to switch from still photo shooting mode to movie recording mode.
• Page 439
  Connecting to a Smartphone via Wi-Fi Sending Images to a Smartphone Automatically as You Shoot Your shots can be sent automatically. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [5: Wireless communication settings]. Select [Wi-Fi settings].
• Page 440
  Connecting to a Smartphone via Wi-Fi Set [Size to send]. Select the image size, then press < 0 >. Take the picture.
• Page 441
  Connecting to a Smartphone via Wi-Fi Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. Play back the image. Press the <Q> button. Select [q].
• Page 442
  Connecting to a Smartphone via Wi-Fi (1) Sending Images Individually Select an image to send. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to send, then press < 0 >. You can press the <…
• Page 443
  Connecting to a Smartphone via Wi-Fi (2) Sending Multiple Selected Images Press <0>. Select [Send selected]. Select images to send. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to send, then press <…
• Page 444
  Connecting to a Smartphone via Wi-Fi Exit image selection. Select [OK]. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send]. (3) Sending a Specified Range of Images Press <0>.
• Page 445
  Connecting to a Smartphone via Wi-Fi Specify the range of images. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. You can press the < u > button and turn the <…
• Page 446
  Connecting to a Smartphone via Wi-Fi (4) Sending All Images on the Card Press <0>. Select [Send all card]. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
• Page 447
  Connecting to a Smartphone via Wi-Fi (5) Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback” ( = 345).
• Page 448
  Connecting to a Smartphone via Wi-Fi Select [Send]. Ending Image Transfer Sending Images from the Camera When Paired via Bluetooth (Android) Press the < M > button on the image transfer screen. Select [OK] on the screen on the left to end image transfer and the Wi-Fi connection.
• Page 449
  Connecting to a Smartphone via Wi-Fi During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed. The camera cannot be connected to multiple smartphones via Wi-Fi when it is connected to another device via Wi-Fi. You can cancel the image transfer by selecting [Cancel] during the transfer.
• Page 450
  Connecting to a Smartphone via Wi-Fi Specifying Viewable Images You can specify images viewable on a smartphone by operating the camera. Images can be specified after the Wi-Fi connection is terminated. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen.
• Page 451
  Connecting to a Smartphone via Wi-Fi Select [Viewable imgs]. Select an item. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting- date basis. Images shot up to nine days ago can be specified.
• Page 452
  Connecting to a Smartphone via Wi-Fi [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the…

• Page 453: Connecting To A Computer Via Wi-Fi

  Connecting to a Computer via Wi-Fi This section describes how to connect the camera to a computer via Wi- Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection.

• Page 454
  Connecting to a Computer via Wi-Fi Select [Register a device for connection]. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required.
• Page 455
  Connecting to a Computer via Wi-Fi Steps on the Camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the Computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN].
• Page 456
  Connecting to a Computer via Wi-Fi Steps on the Camera (2) Establish a Wi-Fi connection. Select [OK]. [ D Wi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
• Page 457
  Connecting to a Computer via Wi-Fi If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. Operations using the camera are not possible after you use EOS Utility to switch from still photo shooting mode to movie recording mode.
• Page 458
  Connecting to a Computer via Wi-Fi Sending Images to a Computer Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the Computer (1) Connect the computer and access point and start Image Transfer Utility 2.
• Page 459
  Connecting to a Computer via Wi-Fi Select [OK]. Connect to an access point via Wi-Fi. Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see “Wi- Fi Connection via Access Points” ( = 488).
• Page 460
  Connecting to a Computer via Wi-Fi Sending Images on the Camera to a Computer Automatically On the [Wi-Fi settings] screen, select [Auto send images to computer]. Select [Image sending options]. Select what to send. If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen.

• Page 461: Connecting To A Printer Via Wi-Fi

  Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer via Wi-Fi. For printer operating instructions, refer to the printer user manual. Establishing a Wi-Fi Connection Select [5: Wireless communication settings].

• Page 462
  Connecting to a Printer via Wi-Fi Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see = 516.
• Page 463
  Connecting to a Printer via Wi-Fi Wi-Fi connection is possible with Wi-Fi printers supporting PictBridge (Wireless LAN). To establish a Wi-Fi connection via an access point, see “Wi-Fi Connection via Access Points” ( = 488).
• Page 464
  Connecting to a Printer via Wi-Fi Printing Images Printing Images Individually Select the image to be printed. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to print, then press < 0 >. You can press the <…
• Page 465
  Connecting to a Printer via Wi-Fi Printing by Specifying the Options Press <0>. Select [Print order]. Set the printing options. For the setting procedures, refer to “Digital Print Order Format (DPOF)” ( = 318). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
• Page 466
  Connecting to a Printer via Wi-Fi Print the image. When [OK] is selected, printing starts. Shooting is not possible while connected to a printer via Wi-Fi. Movies cannot be printed. Before printing, be sure to set the paper size. Certain printers may not be able to imprint the file number. If [Bordered] is set, certain printers may imprint the date on the border.
• Page 467
  Connecting to a Printer via Wi-Fi Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen (1) Sets date or file number printing ( = 469). (2) Sets the printing effects ( = 469).
• Page 468
  Connecting to a Printer via Wi-Fi [ Q ] Setting the Paper Size Select the size of the paper in the printer. [ Y ] Setting the Paper Type Select the type of the paper in the printer. [ U ] Setting the Page Layout Select the page layout.
• Page 469
  Connecting to a Printer via Wi-Fi Setting the Date/File Number Imprinting Select [ I ]. Select what to print. Setting the Printing Effects (Image Optimization) Contents displayed on the screen vary depending on the printer. Select [ E ]. Select printing effects. Option Printing Effect Printing effects differ depending on the printer.
• Page 470
  Connecting to a Printer via Wi-Fi Setting the Number of Copies Select [ R ]. Select the number of copies to print. The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. Refer to the printer’s instruction manual to find out what the [Default] settings are.
• Page 471
  Connecting to a Printer via Wi-Fi Cropping the Image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. On the print setting screen, select [Cropping]. Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed.
• Page 472
  Connecting to a Printer via Wi-Fi Depending on the printer, the cropped image area may not be printed as you specified. The smaller the cropping frame, the lower the resolution at which images are printed. Handling Printer Errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer.

• Page 473: Sending Images To A Web Service

  For CANON iMAGE GATEWAY instructions and setting details, refer to the help information for CANON iMAGE GATEWAY. If you also intend to use Web services other than CANON iMAGE GATEWAY, you must have an account with the services you intend to use.

• Page 474
  Sending Images to a Web Service Registering CANON iMAGE GATEWAY Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. You will need to enter an email address used on your computer or smartphone.
• Page 475
  Sending Images to a Web Service Establishing a Wi-Fi Connection Connect to an access point via Wi-Fi. Go to step 7 on = 490. Enter your email address. Enter your email address, then select [OK]. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK].
• Page 476
  Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page. Steps on the Camera (2) Add CANON iMAGE GATEWAY as a destination. Select [ CANON iMAGE GATEWAY is now added.
• Page 477
  Registering Other Web Services Steps on the Computer or Smartphone Configure the Web service you want to use. Visit the CANON iMAGE GATEWAY website and access the camera web link settings page. Follow the on-screen instructions to complete settings for Web services you want to use.
• Page 478
  Sending Images to a Web Service Establishing a Wi-Fi Connection Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select a Web service. If the history ( = 493) is displayed, switch the screen with the < Y > < Z > keys.
• Page 479
  Sending Images to a Web Service Sending Images to a Web Service You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Sending Images Individually Select an image to send.
• Page 480
  Sending Images to a Web Service Sending Multiple Selected Images Press <0>. Select [Send selected]. Select images to send. Press the < Y > < Z > keys or turn the < 5 > dial to select an image to send, then press <…
• Page 481
  Sending Images to a Web Service Select [Size to send]. When YouTube is selected as the destination, [Size to send] is not displayed. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
• Page 482
  Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. Press <0>. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point).
• Page 483
  Sending Images to a Web Service Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
• Page 484
  Sending Images to a Web Service Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
• Page 485
  Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback” ( = 345).
• Page 486
  Sending Images to a Web Service Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. To scroll the screen, use the < W > < X > keys.
• Page 487
  With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed. When sending an image to a Web service other than CANON iMAGE GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully.

• Page 488: Wi-Fi Connection Via Access Points

  Wi-Fi Connection via Access Points This section describes how to join a Wi-Fi network via an access point compatible with WPS (PCB mode). First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. Select [5: Wireless communication settings].

• Page 489
  Wi-Fi Connection via Access Points Select [Register a device for connection]. When [ q ] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display]. Select [Switch network]. Displayed when [ q ], [ D ], or [ l ] is selected.
• Page 490
  Wi-Fi Connection via Access Points Select [WPS (PBC mode)]. Select [OK]. Connect to the access point via Wi-Fi. Press the access point’s WPS button. Select [OK]. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see = 518.
• Page 491
  Go to step 7 on = 435. [DRemote control (EOS Utility)] Go to step 8 or 9 on = 455. [lPrint from Wi-Fi printer] Go to step 7 on = 462. Registering CANON iMAGE GATEWAY Go to step 6 on = 475.
• Page 492
  Wi-Fi Connection via Access Points Send To Screen A screen to select a destination may be displayed depending on the Web service. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual. The [Send to] screen may be displayed.

• Page 493: Reconnecting Via Wi-Fi

  Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item. Select the item to connect to via Wi-Fi from the displayed history.

• Page 494
  Reconnecting via Wi-Fi [D] Computer On the computer, start the EOS software. If the computer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a computer via Wi-Fi, “_ …
• Page 495
  Reconnecting via Wi-Fi Registering Multiple Connection Settings You can register up to 20 connection settings for the Wi-Fi function. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item. When the screen on the left appears, use the <…

• Page 496: Changing Or Deleting Connection Settings

  Changing or Deleting Connection Settings Change or delete connection settings saved on the camera. To change or delete the connection settings, terminate the Wi-Fi connection first. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Select an item. When the screen on the left appears, use the <…

• Page 497
  Displayed when [ q ] (Connect to smartphone) is selected. Settings will appear at the bottom of the screen. Erase connection information You can delete connection settings saved on the camera. For Web services, visit the CANON iMAGE GATEWAY website to delete the connection settings.

• Page 498: Clearing Wireless Communication Settings To Default

  Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [Clear settings]. Select [OK].

• Page 499: View Info Screen

  View Info Screen On the [View info] screen, you can check error details and the camera’s MAC address. Select [Wi-Fi function]. Select [Wi-Fi function] on the [Wireless communication settings] screen. Press the <B> button. The [View info] screen will appear. When an error has occurred, press <…

• Page 500: Responding To Error Messages

  Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < 0 > ( = 499). Select [Error details] on the [Wi-Fi on] screen.

• Page 501
  Responding to Error Messages 11: Connection target not found In the case of [ q ], is Camera Connect running? Establish a connection using Camera Connect ( = 435). In the case of [ l ], is the power of the printer on? Turn on the printer.
• Page 502
  Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( = 518).
• Page 503
  Responding to Error Messages 22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting match the server’s actual address? Set the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used ( = 514, = 518).
• Page 504
  Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? Change the camera’s IP address to avoid using the same address as another device on the network.
• Page 505
  Responding to Error Messages 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera ( = 511).
• Page 506
  Responding to Error Messages 63: Wireless LAN authentication failed Are the camera and the access point set to use the same authentication method? The camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK]. Are the camera and the access point set to use the same password for authentication? The setting is case-sensitive, so check upper- and lower-case characters.
• Page 507
  Responding to Error Messages 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera ( = 511). The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
• Page 508
  Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? Hold down the WPS button for the period of time specified in the access point’s instruction manual.
• Page 509
  Is the network connected? Check the connection status of the network. 126: Could not connect to server CANON iMAGE GATEWAY is under maintenance or load is concentrated temporarily. Try connecting to the Web service again later. 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service.
• Page 510
  Responding to Error Messages 151: Transmission canceled Automatic image transfer to the computer was somehow interrupted. To resume automatic image transfer, set the camera’s power switch to < 2 >, and then set it to < 1 >. 152: Card’s write protect switch is set to lock Is the card’s write protect switch set to the locked position? Slide the card’s write protect switch to the writing position.

• Page 511: Wireless Communication Function Notes

  Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible.

• Page 512
  Wireless Communication Function Notes Using the Wireless Remote Control BR-E1 When [Bluetooth function] is set to [Remote] to use the Wireless Remote Control BR-E1, the camera cannot be connected to a smartphone via Bluetooth.

• Page 513: Security

  Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.

• Page 514: Checking Network Settings

  Checking Network Settings Windows Open the Windows [Command Prompt], then type ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. Mac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, and press the <Return>…

• Page 515: [Wireless Communication Settings] Screen

  [Wireless communication settings] Screen On the [Wireless communication settings] screen, you can change the wireless communication function settings. Select [ 5 : Wireless communication settings]. Wi-Fi settings See the next page. Wi-Fi function The following Wi-Fi functions are available: Communicate with smartphone Remote control (EOS Utility) Print from Wi-Fi printer Send images to Web service…

• Page 516: [Wi-Fi Settings] Screen

  [Wi-Fi settings] Screen Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access point via Wi- Fi).

• Page 517: Virtual Keyboard Operation

  Virtual Keyboard Operation (7) (8) Input area, for entering text Space Cursor keys, for moving in the Delete a character in the input input area area Current no. of characters/no. Change the type of keyboard available Finish the text entry Keyboard Switch input modes Use the <…

• Page 518: Setting The Ip Address Manually

  Setting the IP Address Manually Set up the IP address settings manually. The items displayed vary depending on the Wi-Fi function. Select [Manual setting]. Select [OK]. Select an item. Select an item to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].

• Page 519
  Setting the IP Address Manually Select [OK]. When you have completed setting the necessary items, select [OK]. If you are not sure what to enter, see “Checking Network Settings” ( = 514), or ask the network administrator or another person knowledgeable about the network.

• Page 520: Wi-Fi/Bluetooth Status Display

  Wi-Fi/Bluetooth Status Display Wireless communication status can be checked on the camera screen. Wi-Fi function Bluetooth function Wireless signal strength Wireless signal Communication status Wi-Fi function strength Wi-Fi: Disable connected Wi-Fi: Enable Connecting (Blinking) Connected Sending data (fg) Connection error (Blinking)

• Page 521
  Wi-Fi/Bluetooth Status Display Bluetooth Function Indicator Bluetooth function Connection status Screen Bluetooth connected Other than [Disable] Bluetooth not connected [Disable] Bluetooth not connected Not displayed…

• Page 523: Custom Functions / My Menu

  Custom Functions / My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs.

• Page 524: Tab Menus: Customization

  Tab Menus: Customization = 526 = 530 = 536 = 546 = 546…

• Page 525: Setting Custom Functions

  Setting Custom Functions Select [C.Fn I: Exposure], [C.Fn II: Autofocus], or [C.Fn III: Operation/ Others]. Select a Custom Function number. Use the < Y > < Z > keys to select the Custom Function number (1) to set up. Change the setting as desired. Use the <…

• Page 526: Custom Function Settings

  Custom Function Settings You can customize camera features on the [ 8 ] tab to suit your shooting preferences. C.Fn I: Exposure C.Fn I-1: Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. 0: 1/3-stop 1: 1/2-stop When [1/2-stop] is set, the display will be as shown below.

• Page 527
  Custom Function Settings C.Fn I-3: Bracketing auto cancel You can specify to cancel AEB and white balance bracketing when the power switch is set to < 2 >. 0: Enable 1: Disable C.Fn I-4: Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed.
• Page 528
  Custom Function Settings C.Fn I-5: Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, –, +], the bracketed shots will be taken as shown in the table below. 0: 3 shots 1: 2 shots 2: 5 shots…

• Page 529: Safety Shift

  Custom Function Settings C.Fn I-6: Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. When set to [Shutter speed/Aperture], this setting applies to < s > and <…

• Page 530
  Custom Function Settings C.Fn II: Autofocus C.Fn II-1: Tracking sensitivity You can set the subject-tracking sensitivity, which affects responsiveness to interfering objects that move across AF points or subjects that stray from AF points during Servo AF. Standard setting. Suitable for moving subjects in general. Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if an obstacle cuts across the AF points or if the subject strays from the AF points.
• Page 531
  Custom Function Settings C.Fn II-2: Acceleration/deceleration tracking Sets the Servo AF tracking sensitivity for subjects that change speed suddenly, as by suddenly moving or stopping. Suited for subjects that move at a steady speed (minor changes in moving speed). –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed).
• Page 532
  Custom Function Settings C.Fn II-3: AF point auto switching This sets the switching sensitivity of the AF points as they track the subject moving dramatically up, down, left, or right. Takes effect when [ z : AF method] is set to [ u +Tracking], [Expand AF area: Z ], [Expand AF area: Around], or [Zone AF].
• Page 533
  Custom Function Settings C.Fn II-4: Lens drive when AF impossible You can specify lens operation in cases when the camera cannot autofocus on a subject. 0: Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus.
• Page 534
  Custom Function Settings C.Fn II-6: Orientation linked AF point You can assign AF points or Zone AF frames to different positions based on whether you are shooting vertically or horizontally. 0: Same for both vertic./horiz. AF points or Zone AF frames in the same position are used for both vertical and horizontal shooting.
• Page 535
  Custom Function Settings C.Fn II-7: Initial Servo AF pt for c You can set the initial AF point for Servo AF when the AF method is set to [ u +Tracking]. 0: Automatic The initial AF point of Servo AF for [ u +Tracking] is set automatically to suit the shooting conditions.
• Page 536
  Custom Function Settings C.Fn III: Operation/Others C.Fn III-1: Dial direction during Tv/Av Dial turning direction when setting the shutter speed and aperture can be reversed. In the < a > shooting mode, the turning direction of the < 6 > and < 5 > dials will be reversed.
• Page 537
  Custom Function Settings C.Fn III-5: Customize buttons You can assign frequently used functions to buttons, such as < V > or < p >. Different functions, for use when shooting still photos or movies, can be assigned to the same button. Select a part of the bar.
• Page 538
  Custom Function Settings Functions Available for Buttons Function Metering and AF start AF stop AF point selection Direct AF point selection Set AF point to center One-Shot AF z Servo AF* Touch & drag AF Eye Detection AF* Metering start AE lock AE lock (hold) AE lock (while button pressed)
• Page 539
  Custom Function Settings…
• Page 540
  Custom Function Settings Function Dial function settings Depth-of-field preview* Reset selected item in Fv mode* Reset Tv/Av/ /ISO in Fv mode* Quick Control screen Magnify/Reduce Menu display Image quality* Picture Style Select folder Create folder Maximize screen brightness (temporary) Display off Switch between viewfinder/screen Eco mode Wi-Fi function…
• Page 541
  Custom Function Settings < > stands for “AF stop button” provided on super telephoto lenses equipped with Image Stabilizer.
• Page 542
  Custom Function Settings C.Fn III-6: Customize dials You can assign frequently used functions to dials, such as < 5 >, < 6 >, or < T >. Select a part of the bar. Select a function to assign. Press < 0 > to set it.
• Page 543
  Custom Function Settings Functions Available for Dials Function Shutter speed setting in M mode Aperture setting in M mode Change aperture (hold metering button) Change shutter speed (hold metering button) Set ISO speed (hold metering button) Exposure compensation (hold metering button) Change aperture value Change shutter speed…
• Page 544
  Custom Function Settings C.Fn III-7: Release shutter without lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera. 0: Disable 1: Enable C.Fn III-8: Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera’s power switch is set to <…
• Page 545
  Custom Function Settings C.Fn III-9: Audio compression Sets audio compression for movie recording. [1: Disable] allows higher audio quality than when audio is compressed, but file sizes are larger. 0: Enable 1: Disable Editing movie files recorded with [1: Disable] and then saving them with compression will also compress the audio.

• Page 546: Clearing Custom Function Settings

  Clearing Custom Function Settings Clearing all Custom Function settings By selecting [ 8 : Clear all Custom Func. (C.Fn)], you can clear all Custom Function settings other than [Customize buttons] and [Customize dials] settings. Clearing [Customize buttons] and [Customize dials] settings By selecting [ 8 : Clear customized settings], you can clear [Customize buttons] and [Customize dials] settings.

• Page 547: Tab Menus: My Menu

  Tab Menus: My Menu = 548 = 551 = 551 = 552…

• Page 548: Registering My Menu

  Registering My Menu Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. Creating and Adding My Menu Tab Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.

• Page 549
  Registering My Menu Select [Select items to register]. Register the desired items. Select the item to be set, then press < 0 >. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the <…
• Page 550
  Registering My Menu Delete tab You can delete the current My Menu tab. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. Select [ ] or press the <…
• Page 551
  Registering My Menu Deleting all My Menu tabs / Deleting all items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ 9 ] tab will revert to its default.
• Page 552
  Registering My Menu Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < M > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ 9 ] tab selected.

• Page 553: Reference

  Reference This chapter provides reference information on camera features.

• Page 554: Software Overview

  Always update any previous version of the software that is installed (by overwriting it with the latest version). Download the software. Connect to the Internet from a computer and access the following Canon website. www.canon.com/icpd Select your country or region of residence and download the software.

• Page 555
  Follow the on-screen instructions to install the software. Downloading the Software Instruction Manuals Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer. Software Instruction Manual Download Site www.canon.com/icpd To view the Instruction Manuals (PDF files), an Adobe PDF viewing software such as Adobe Acrobat Reader DC (most recent version recommended) is required.

• Page 556: Importing Images To A Computer

  Importing Images to a Computer You can use EOS software to import images from the camera to a computer. There are two ways to do this. Importing by Connecting the Camera to the Computer Install the software (=554). Connect the camera to the computer with an interface cable (sold separately).

• Page 557
  Importing Images to a Computer Importing Images with a Card Reader You can use a card reader to import images to a computer. Install the software (=554). Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual.

• Page 558: Charging A Battery In The Camera

  In case of charging problems, the access lamp blinks in green and a protective circuit stops charging. In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, contact your dealer or nearest Canon Service Center.

• Page 559
  Charging a Battery in the Camera If the access lamp does not light up, try unplugging the USB power adapter and plugging it in again. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity. For safety reasons, recharging in low temperatures (5–10°C / 41–50°F) will take longer.

• Page 560: Using An Extension Grip

  Using an Extension Grip Extension Grip EG-E1 (sold separately) is a dedicated accessory that makes EOS RP cameras even easier to hold. The battery and card can be inserted or removed while the extension grip is attached to the camera.

• Page 561
  Using an Extension Grip Open the extension grip cover. For instructions on inserting or removing the battery and card, see “Inserting/ Removing the Battery and Card” ( = 42). When reattaching the card slot/battery compartment cover to the camera, attach it opened to at least 90°.

• Page 562: Troubleshooting

  Canon Service Center. Power-Related Problems Batteries cannot be charged with the charger. Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. The charger’s lamp blinks at high speed. If (1) the battery charger or battery has a problem or (2) communication with the battery failed (with a non-Canon battery pack), the protection circuit will stop charging, and the charge lamp will blink in orange.

• Page 563
  In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, contact your dealer or nearest Canon Service Center. The access lamp is not lit during charging with the USB power adapter.
• Page 564
  Troubleshooting [Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. Remove and install the battery again ( = 42). If the electrical contacts are dirty, use a soft cloth to clean them.
• Page 565
  Troubleshooting Shooting-Related Problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses. No images can be shot or recorded. Make sure the card is properly inserted ( = 42). Slide the card’s write-protect switch to the Write/Erase setting ( = 42).
• Page 566
  Troubleshooting The image is out of focus or blurred. Set the lens’s focus mode switch to <AF> ( = 48, = 51). Press the shutter button gently to prevent camera shake ( = 54). With a lens equipped with an Image Stabilizer, set the IS switch to < 1 >. In low light, the shutter speed may become slow.
• Page 567
  The maximum burst displayed does not change when you switch cards, even if you switch to a high-speed card. The maximum burst shown in the table on = 583 is based on Canon’s testing card. (The faster the card’s writing speed, the higher the actual maximum burst will be.) For this reason, the maximum burst displayed may differ from the actual maximum burst.
• Page 568
  Troubleshooting ISO 100 cannot be set. ISO speed expansion cannot be selected. Check the [ISO speed range] setting under [ z : z ISO speed settings]. When [ z : Highlight tone priority] is set to [Enable] or [Enhanced], the available ISO speed range is ISO 200–40000 for still photo shooting. Even if you set [ISO speed range] under [ z : ISO speed settings] to expand the setting range, you cannot select L (equivalent to ISO 50), H1 (equivalent to ISO 51200), or H2 (equivalent to ISO 102400).
• Page 569
  Troubleshooting Using flash in < f > or < d > mode lowers the shutter speed. Under [ z : External Speedlite control], set [Slow synchro] to [1/180- 1/60sec. auto] or [1/180 sec. (fixed)] ( = 224). The flash does not fire. Make sure the flash is securely attached to the camera.
• Page 570
  Troubleshooting High-speed sync cannot be set in < f > or < d > mode. Under [ z : External Speedlite control], set [Slow synchro] to [1/180- 30sec. auto] or [1/180-1/60sec. auto] ( = 224). Remote control shooting is not possible. When taking still photos, set the drive mode to <…
• Page 571
  Troubleshooting Movie recording stops by itself. If the card’s writing speed is slow, movie recording may stop automatically. For cards that can record movies, see = 585. To find out the card’s writing speed, refer to the card manufacturer’s website, etc. If you shoot a movie for 29 min.
• Page 572
  Troubleshooting The exposure changes during movie recording. If you change the shutter speed or aperture during movie recording, the changes in the exposure may be recorded. Shooting a few test movies is recommended if you intend to perform zooming during movie recording. Zooming as you record movies may cause exposure changes or lens sounds to be recorded, an uneven audio level, or loss of focus.
• Page 573
  Troubleshooting Problems with Wireless Features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen.
• Page 574
  Troubleshooting Cannot reconnect to a smartphone. Even with a combination of the same camera and smartphone, if you have changed the settings or selected a different setting, reconnection may not be established even after selecting the same SSID. In this case, delete the camera connection settings from the Wi-Fi settings on the smartphone and set up a connection again.
• Page 575
  Troubleshooting Display Problems The menu screen shows fewer tabs and items. In Basic Zone modes, some tabs and items are not displayed. Tabs and items on the menu screen also vary for still photos and movies. The display starts with [ 9 ] My Menu, or the [ 9 ] tab alone is displayed.
• Page 576
  Troubleshooting The shooting date and time displayed are incorrect. Make sure the correct date and time are set ( = 374). Check the time zone and daylight saving time ( = 374). The date and time are not in the image. The shooting date and time do not appear in the image.
• Page 577
  Troubleshooting Playback Problems Part of the image blinks in black. [ 3 : Highlight alert] is set to [Enable] ( = 351). A red box is displayed on the image. [ 3 : AF point disp.] is set to [Enable] ( = 352). During image playback, the AF points are not displayed.
• Page 578
  Troubleshooting Operation sound and mechanical sound can be heard during movie playback. If you operate the camera’s dials or lens during movie recording, the operation sound will also be recorded. Using the Directional Stereo Microphone DM-E1 (sold separately) is recommended ( = 258). The movie appears to freeze momentarily.
• Page 579
  Troubleshooting My card reader does not recognize the card. Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized. In this case, connect your camera to the computer with the interface cable, then import the images to the computer using EOS Utility (EOS software).
• Page 580
  Troubleshooting Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. Under [ 5 : Sensor cleaning], when you select [Clean now f ], the shutter will make a mechanical sound during the cleaning, but no picture will be recorded to the card ( = 382). Automatic sensor cleaning does not work.

• Page 581: Error Codes

  Clean the electrical contacts on the camera, lens, and mount adapter, use a genuine Canon lens, or reinsert the battery ( = 30, = 42). Card cannot be accessed. Reinsert/change card or format card with camera.

• Page 582: Performance Data

  Performance Data Still Photo Shooting Number of Possible Shots (Approx. number of shots) Room Temperature Low Temperature Temperature (23°C / 73°F) (0°C / 32°F) Possible shots • Based on using the screen and a fully charged Battery Pack LP-E17, and following CIPA (Camera &…

• Page 583
  29.1+9.1 17.1+9.1 1160 • The number of possible shots is based on Canon’s testing standards and an 32 GB card. • Maximum burst measured under conditions and with an SD card conforming to Canon testing standards (32 GB standard/UHS-II card, < o > High-speed continuous shooting, Full-frame still photo cropping/aspect ratio, ISO 100, Standard Picture Style).
• Page 584
  Performance Data Pixel Count When Still Photo Cropping/Aspect Ratio is Set (Approx. pixels) Image Quality Full-frame (3:2) 1.6x (crop) 6240×4160 3888×2592 3 / 1 / F (Approx. 26.0 megapixels) (Approx. 10.1 megapixels) 4160×2768* – (Approx. 11.5 megapixels) 3120×2080 – (Approx. 6.5 megapixels) 2400×1600 2400×1600 (Approx.
• Page 585
  Performance Data Movie Recording Cards that Can Record Movies Movie Recording Size SD Card UHS-I, UHS Speed Class 3 or higher SD Speed Class 10 or higher HDR movie SD Speed Class 4 or higher • When movie cropping and Movie digital IS are disabled. •…
• Page 586
  Performance Data Total Movie Recording Time and File Size Per Minute (Approx.) Total Possible Recording Time on Card Movie Recording Size File Size 8 GB 32 GB 128 GB 8 min. 35 min. 2 hr. 20 min. 869 MB/min. H 45 17 min.
• Page 587
  Performance Data Total Possible Time for Time-lapse Movie Recording (Approx.) Time-lapse Movie Recording Room Temperature Low Temperature (23°C / 73°F) (0°C / 32°F) Interval Screen Auto Off Disable Approx. 2 hr. 40 min. Approx. 2 hr. 30 min. 2 sec. Enable Approx.
• Page 588
  Performance Data ISO Speed in Movie Recording In [ k ] Mode For Full HD/HD movies, ISO speed is automatically set in a range of ISO 100–25600. For 4K movies, ISO speed is automatically set in a range of ISO 100– 12800.
• Page 589
  Performance Data In [ M ] Mode For Full HD/HD movies with ISO speed set to [AUTO], ISO speed is automatically set in a range of ISO 100–25600. For 4K movies with ISO speed set to [AUTO], ISO speed is automatically set in a range of ISO 100–12800.
• Page 590
  Performance Data Image Playback Resize Options by Original Image Quality Available Resize Settings Original Image Quality * Only b is available for images shot with [ z : z Cropping/aspect ratio] set to [1.6x (crop)]. Size for Resized Images (Approx. pixels) Image Full-frame (3:2) 1.6x (crop)

• Page 591: Information Display

  Information Display Still Photo Shooting Screen Each time you press the < B > button, the information display will change. Viewfinder display positions vary for some items. The display will show only the settings currently applied. (13) (14) (15) (16) (17) (18) (19)

• Page 592
  Information Display (25) (35) (26) (27) (28) (36) (37) (29) (30) (38) (31) (39) (32) (40) (41) (33) (34) (42) (25) Flash ready/FE Lock/High-speed (33) Flash exposure compensation sync (34) Exposure level indicator (26) Wi-Fi signal strength (35) Focus distance display (27) Wi-Fi function (36) Magnify button (28) Touch Shutter…
• Page 593
  Information Display Movie Recording Screen Each time you press the < B > button, the information display will change. Viewfinder display positions vary for some items. The display will show only the settings currently applied. (11) (12) (13) (14) (15) (16) (17) (18)
• Page 594
  Information Display (21) (28) (22) (29) (23) (30) (24) (31) (25) (32) (26) (27) (33) (21) Sound-recording level indicator (28) Exposure level indicator (manual) (29) GPS acquisition status (22) Wi-Fi function (30) ISO speed (23) AE lock (31) Highlight tone priority (24) Shutter speed (32) Exposure compensation (25) Aperture…
• Page 595
  Information Display Scene Icons In the < A > shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. Portrait Non-Portrait Subject Background Nature and…
• Page 596
  Information Display *4: Displayed when all the following conditions apply: The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod. *5: Displayed with any of the lenses below: • EF300mm f/2.8L IS II USM •…
• Page 597
  Information Display Playback Screen Basic information display for still photos (10) (11) (12) (13) (14) (15) Wi-Fi function Already sent to a computer/ smartphone Wi-Fi signal strength (10) Rating Battery level (11) Image protection Playback No./Total images/ Number of found images (12) Folder number-File number Shutter speed (13) Image quality/Edited image/…
• Page 598
  Information Display Detailed information display for still photos (10) (11) (12) (13) (14) (15) (16) (17) Aperture (11) ISO speed Shutter speed (12) Highlight tone priority Shooting mode/Multiple exposure (13) Scroll bar White balance (14) Flash exposure compensation/ Bounce/HDR shooting/Multi Shot Auto Lighting Optimizer Noise Reduction White balance correction…
• Page 599
  Information Display Detailed information display for movies Movie playback Compression method Movie recording mode/Time-lapse Movie digital IS movie/Video snapshot Recording time Image size Movie recording format Frame rate * < G > will be displayed for still photos taken as test shots for time-lapse movies. During movie playback, “*, *”…
• Page 600
  The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. All other trademarks are the property of their respective owners.
• Page 601
  About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
• Page 602
  Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery). Please note that…

• Page 603: Index

  Index ALL-I : 265 Numbers Ambience priority (AWB) : 142 1-point AF : 188, 193 Anti-flicker shooting : 179 [4K] 3840×2160 (Movie) : 249 Aperture-priority AE : 100 4K frame capture : 306 Area AF frame : 80, 81, 192 <A+>…

• Page 604
  Index Bulb timer : 107 Contrast : 136, 153 BUSY : 118 Control ring : 58 Copyright information : 411 Creative Assist : 73, 331 <C1>/<C2>/<C3> (Custom shooting) : Creative Zone : 35 Cropping (images) : 337 Camera Custom Functions : 523 Camera vibration blur : 107, 210 Customize buttons : 538 Default settings : 410…
• Page 605
  Index Flash (Speedlite) : 220 Custom Functions : 230 Eco mode : 371 FEB (Flash Exposure Bracketing) : Electronic level : 388 Erasing (images) : 314 FE lock : 220 Err (error codes) : 581 Flash control (function settings) : 222 Evaluative metering : 211 Flash exposure compensation : 220, exFAT : 254, 368…
• Page 606
  Index Group Photo : 78 Continuous (file numbering) : 364 Erasing : 314 File numbering : 363 H1/H2 (Expanded ISO speed) : 133 Highlight alert : 351 Handheld night scene : 87 Histogram : 349 [HD] 1280×720 (Movie) : 249 Importing (to computer) : 556 HDMI : 290, 308, 386 Index display : 300…
• Page 607
  Index Maximum burst : 118, 583 Medium (image quality) : 116 Kids : 81 Memory cards → Cards Menu : 60 Landscape : 79 Custom Functions : 524 Language : 377 Dimmed menu items : 63 Large (image quality) : 116 Function settings : 358 Lens : 48, 50 Movie shooting : 236…
• Page 608
  High ISO speed : 157 Frame Grab : 306 Long exposures : 159 Frame rate : 252 Non-Canon flash units : 221 HDMI output : 290, 386 Normal (Image quality) : 116 HDR movie recording : 247 NTSC : 252, 378…
• Page 609
  Index Power saving : 372 Scene icons : 72, 595 P (Program AE) : 96 Scene Intelligent Auto : 68 Pressing completely : 54, 395 <SCN> (Special scene) : 34, 75 Pressing halfway : 54, 395 Screen : 30, 45 Printing Angle adjustment : 45 Photobook set-up : 322…
• Page 610
  Wi-Fi function : 415 Touch operation : 64, 298, 379 Android : 420 Touch Shutter : 163 Camera access point mode : 492 Tracking sensitivity : 530 Camera Connect : 420, 437 Tripod socket : 33 CANON iMAGE GATEWAY : 473…
• Page 611
  Index Clearing wireless communication Virtual keyboard : 517 settings : 498 Wi-Fi settings : 516 Connection history : 493, 516 WPS (Wi-Fi Protected Setup) : 488 Edit device information : 450, 496 Wind filter : 257 EOS Utility : 453 Wireless communication settings : 398, Erase connection information : 497 Image Transfer Utility 2 : 458…
• Page 612
  The descriptions in this Instruction Manual are current as of October 2018. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site.