Реле времени астрономическое orbis astro nova city ob178012 инструкция

INSTRUCTIONS FOR USE

Vacations or

holiday program

C1 circuit status

Day of the week

indicator

Current time

Summer time

Time scale

0

3

O N

O FF

1

2

Decrease or move up menu /

3

4

5

6

C1 manual operation

7

C

Go back

C1

DESCRIPTION

The ASTRO NOVA CITY is a time switch designed to control luminous loads in

function of dawn and dusk rimes. It includes a program that automatically adjusts

the dawn lighting-up and dusk switching-off times, without any need for

maintenance. The geographic position location is made by selecting the closest

city to your location from a list of the most important cities in your country.

Its small size of only two modules makes it ideal for installation on boards with little

available space. The unit includes 22 memory spaces in two independent circuits

that can be programmed in an astronomic manner or with fixed times.

INSTALLATION

WARNING: The assembly and installation of the electric apparatus must be

carried out by an authorised installer.

THE ELECTRIC PAOER MUST BE SWITCHED OFF BEFORE COMMENCING

INSTALLATION.

The unit is internally protected against interference by a security circuit. However,

certain especially strong fields could affect correct operation. Interference can be

avoided if the following installation rules are followed:

— The unit must not be installed close to inductive loads

(motors, transformers and contactors etc )

— It is recommended that a separate power line be employed

(fitted with a mains filter if necessary).

— Inductive loads must be fitted with interference suppressors (MOVs, RC filters).

If the time switch is used with other devices in an installation, it will be necessary

to verify that the overall assembly does not generate any parasitic interference.

INSTALLATION: Electronic control device, independently installed in a distribution

cabinet, fitted with 35-mm symmetric profile in accordance with EN 60715 (DIN

rail).

CONNECTION: In accordance with the wiring drawing

C2

4

C1

1

PUTTING INTO SERVICE AND INSTALLATION

All programming sections comply with the following rules:

— The data to be modified s identified by flashing.

i

— Each press of the Δ and ∇ keys increases or decreases the flashing data. If it is

maintained pressed, the increase/decrease speed becomes five units per second.

— After the last data item, confirmation is given by OK or, if no key is pressed within

one minute, the unit returns to normal operation: the screen displays the current

time and the C1 and C2 circuit status.

The dawn and dusk times can be displayed in normal mode by pressing «C», which

shows AST screen, together with current dawn and dusk times.

To install the ASTRO NOVA CITY as an astronomic time switch, it is only

necessary to enter the ZONE MENU, pressing the OK key and selecting the city

closest to the installation and confirm with OK: The CORR screen displays: NO

and the dawn and dusk times (automatically changes from one to another every

five seconds) corresponding to the selected zone. if no corrections are to be

performed, confirm with OK and the switch is programmed with the two circuits

operating in astronomic mode.

ASTRONOMIC TIME SWITCH

ASTRO NOVA CITY

C2 circuit status

Permanet

channel indicator

12-hour

time format

Winter time

Screen

6

9

12

15 18 21

24

Decrease or move down menu /

C2 manual operation

C1

C2

Confirm screen option /

OK

Access menu

C2

MENU

5

6

L

2

3

N

SELECTING LANUGUAGE

Pressing OK enters MENU and with the Δ and ∇ keys select LANGUAGE,

confirming with OK. The Δ and ∇ keys are used to select the desired language,

confirming with OK and returning to the main screen.

ZONE ASSIGNMENT

Pressing OK enters the ZONE MENU, pressing it again enters the city list, the Δ

and ∇ keys are used to select the closest city to the installation zone. Confirm with

OK and the screen displays CORR. NO and the dawn and dusk rimes

alternatively. If the displayed dusk (switch-on) and/or dawn (switch-off) times are to

be modified, «YES» is selected with the Δ and ∇ keys, pressing OK to confirm,

dawn correction is entered and the screen displays CORR. DAWN, the dawn time

and 0:00 in the lower section, which indicates the correction time. Using the Δ and

∇ keys the value is modified increasing or decreasing it up to three hours. Confirm

with OK to display CORR. DUSK and the dusk time, the operation is repeated,

confirmed with OK and returning to the main screen.

PREDEFINED PARAMETERS

The time switch leaves the factory programmed in the country language, set to the

official country date and time, with the zone set to the first alphabetical city to the

list, and 4 pre-established programs.

Program 01: C1 ON DUSK for all days of the week

Program 02: C1 OFF DAWN for all days of the wee k

Program 03: C2 ON DUSK for all days of the week

Program 04: C2 OFF DAWN for all days of the week

on

DUSK

off

C

P1

1

C

P3

2

These programs remain in memory even if a reset is performed.

If any of these programs is not suitable, it can be modified or deleted by pressing

OK and entering the ZONE MENU, selecting PROGRAM MENU with the Δ and ∇

keys and pressing OK again to display PROG 01. The program to be modified or

deleted in selected with the Δ and ∇ keys and OK is pressed. The program

number is displayed onscreen with ENTER (example: PROG:02 ENTER). Again

with the Δ and ∇ keys ENTER is selected if the program is to be modified or

DELETE if it is to be eliminated. If ENTER has been selected, the program to be

modified will be displayed. The Δ and ∇ keys are used to modify and OK to

confirm. If DELETE is selected, once the program has appeared onscreen, OK is

pressed and the program is deleted.

SETTING THE TIME

Pressing OK enters the ZONE MENU and the Δ and ∇ keys are used to select

DATE MENU, confirmed with OK to enter YEAR DATE with the year digits flashing

on the screen and the Δ and ∇ keys are used to change the year value with OK

confirming the entered digits. The MONTH, DAY, DAY OF THE WEEK, TIME and

MINUTES are similarly entered, confirming with OK to enter in ZONE.

CHANGING THE GEOGRAPHIC ZONE

If, once the unit is programmed we wish to change the zone, the dawn or dusk

times, ZONE MENU is entered again and the necessary parameters are changed

in the same way as in the Zone Assignment section.

PROGRAMMING

In normal mode press the OK key to access the ZONE MENU and select

PROGRAM MENU with the Δ and ∇ keys. OK is pressed and PROGRAM PROG

01 is displayed onscreen, if an operation is to be programmed in this program

press OK to display PROG 01 ENTER, press OK again and select the circuit and

the operation to be executed from: C1 ON, C1 OFF, C2 ON and C2 OFF. Confirm

the selection with OK and select the operation type, which may be: Fixed time,

Dawn (DAWN) astronomic time or Dusk (DUSK) astronomic time.

FIXED TIME OPERATION

If fixed time is selected, press OK and enter the hour and minutes, day or days of

the week information in those desired accepting or not, day by day, in those for

which the operation is to be performed, confirming with OK. If, when confirming the

day of the week with the OK key, this is maintained pressed, the operation will be

selected as a holiday, the word HOLIDAYS is displayed onscreen, together with

the symbol » ···· » and confirm with OK, the screen will display PROGRAM PROG

02.

ASTRONOMIC OPERATION

Once the circuit is selected, together with the operation between C1 ON, C1 OFF,

C2 ON and C2 OFF, the type of operation to choose is displayed. The dawn

(DAWN) or dusk (DUSK) operation that is to be performed is selected and the

screen displays the possibility to correct the time for the displayed dawn or dusk

time. If we agree with the screen display the correction is left at zero and the hours

and minutes are confirmed with OK. If it is to corrected by more or less, the

correction time is entered in hours and minutes (up to ± 9 hours and 59 minutes),

automatically displaying the time at which the operation is to be performed, confirm

with OK then select the day or days of the week on which this operation is to be

carried out.

If, on confirming the last day of the week with the OK key, this is maintained

pressed, the operation will be selected as a holiday, the word HOLIDAYS is

displayed onscreen, together with the symbol «

WARNING: If an operation is programmed on a holiday, the HOLIDAYS

program cannot be used and is removed from the menu remaining as a

HOLIDAY period.

If astronomic (dawn — dusk) operations are programmed in the same circuit and

fixed time, they could overlap since astronomic operations move forward and

backward during the year and could lead to incorrect operations.

For example: A shop window lights are to be switched on at nightfall (astronomic

operation) and are to be switched off again at 21:30 (fixed time operation). Since

the astronomic switch-on operation is moved forward during summer, there will be

a time when dusk will fall after 21:30 and the switch-on will occur after the

programmed switch-off time so that no actual switch-off will occur and the lights

will remain on until another switch-off command.

Night period

DAWN

P2

PREDEFINED

OPERATIONS

P4

«.

INTERRUPTOR HORARIO ASTRONÓMICO

INSTRUCCIONES

DE EMPLEO

Programa de

vaciones ó festivos

Estado circuito C1

Indicador día

de la semana

Horario

verano

Hora actual

Escala de tiempo

0

3

O N

O F F

Incrementar o ascender

por menú

1

2

3

4

5

Accionamiento manual C1

6

7

C

C1

Retroceder

DESCRIPCIÓN

El ASTRO NOVA CITY es un interruptor horario diseñado para controlar las

cargas luminosas en función de las horas de ortos (amanecer) y ocasos

(anochecer). Dispone de un programa que ajusta automáticamente el horario de

encendido (ocaso) y apagado (orto), sin necesidad de mantenimiento. La

localización de la posición geográfica se realiza seleccionando entre 52 ciudades

españolas y 3 portuguesas.

Su pequeño tamaño de tan solo 2 módulos, lo hacen ideal para su instalación en

cuadros con poco espacio disponible. El aparato dispone de 22 espacios de

memoria en 2 circuitos independientes que pueden ser programados de forma

astronómica o con horarios fijos.

INSTALACIÓN

ATENCIÓN: La instalación y el montaje de los aparatos eléctricos debe ser

realizada por un instalador autorizado.

ANTES DE PROCEDER A LA INSTALACIÓN DESCONECTAR LA

ALIMENTACIÓN.

El aparato está internamente protegido contra las interferencias por un circuito de

seguridad. No obstante, algunos campos especialmente fuertes pueden llegar a

alterar su funcionamiento. Las interferencias pueden evitarse si se tienen en

cuenta las siguientes reglas de instalación:

— El aparato no debe instalarse próximo a cargas inductivas

(motores, transformadores, contactores, etc. )

— Conviene prever una línea separada para la alimentación

(si es preciso provista de un filtro de red).

— Las cargas inductivas tienen que estar provistas de supresores de

interferencias (varistor, filtro RC).

Si el interruptor horario se usa en combinación con otros dispositivos en una

instalación, es necesario comprobar que el conjunto así constituido no genera

perturbaciones parásitas.

MONTAJE: Dispositivo de control electrónico de montaje Independiente en

armario de distribución, provisto de perfil simétrico de 35 mm, de acuerdo a la

norma EN 60715 (Rail DIN)

CONEXIÓN: Según esquema de conexiones

C2

4

5

C1

1

2

PUESTA EN SERVICIO E INSTALACIÓN

En todos los apartados de programación se cumplen las siguientes reglas:

— Los datos a modificar se identifican porque parpadean.

— Cada pulsación de las teclas ∆ y ∇ incrementa o decrementa el dato que

parpadea. Si se mantiene pulsada la velocidad de incremento/decremento

pasa a ser de 5 unidades por segundo.

— Después que el último dato se confirma con OK o si no se pulsa ninguna

tecla durante más de 1 minuto el aparato vuelve al funcionamiento normal: la

pantalla muestra la hora actual, la fecha y el estado de los circuitos C1 y C2.

ASTRO NOVA CITY

Estado de circuito C2

Indicador de canal

permanente

Formato de hora

12 horas

Horario

invierno

Pantalla

6

9

12

15 18 21

24

Decrementar o descender

por menú

Accionamiento manual C2

C1

C2

OK

Validar opción de pantalla

C2

MENU

Acceder al menú

6

L

3

N

La hora de orto y ocaso puede ser visualizada desde el modo normal pulsando

«C», mostrando la pantalla AST y la hora de orto y ocaso del día actual.

Para instalar el ASTRO NOVA CITY como interruptor horario astronómico,

solo es necesario entrar en MENU ZONA pulsando la tecla OK y seleccionar

la ciudad más próxima al lugar de instalación y validar con OK. Aparece en

pantalla CORR: NO y la hora de orto y ocaso (cambia automáticamente de

una a otra cada 5 segundos) correspondiente a la zona seleccionada. Si no

deseamos realizar ninguna corrección validamos con OK y ya tenemos el

interruptor programado con los dos circuitos en funcionamiento

astronómico.

SELECCIÓN DE IDIOMA

El aparato permite realizar la programación en tres idiomas: Español, Portugués e

Inglés.

Pulsando «OK» entramos en MENU y con las teclas ∆ y ∇ seleccionamos

IDIOMA y pulsamos OK. Con las teclas ∆ y ∇ elegimos el idioma deseado y

validamos con la tecla «OK » y volvemos a la pantalla principal.

ASIGNACIÓN DE ZONA

Pulsando tecla OK entramos en MENU ZONA, pulsando de nuevo OK entramos

en la lista de ciudades (52 de España y 3 de Portugal), con las teclas ∆ y ∇

seleccionamos la ciudad más próxima a la zona de instalación. Validamos con OK

y la pantalla nos muestra CORR. NO, y la hora de orto y ocaso alternativamente.

Si deseamos variar el horario de ocaso (encendido) y/o el horario de orto

(apagado) que aparece en pantalla seleccionamos SI con las teclas ∆ y ∇ y

pulsando OK entramos en la corrección de orto y aparece en pantalla CORR.

ORTO, la hora del orto y en la parte inferior 0:00, que nos indica el tiempo de

corrección. Con las teclas ∆ y ∇ modificamos el dato aumentando o disminuyendo

hasta 3 horas. Validamos con OK y aparece CORR. OCAS y la hora de ocaso,

repetimos la operación, validamos con OK y pasamos a la pantalla principal.

PARAMETROS PREDEFINIDOS

El interruptor horario sale de fábrica programado en idioma Español, puesto en

fecha y hora oficial española, seleccionada la zona de A Coruña y con 4

programas preestablecidos.

Programa 01: C1 ON OCS (ocaso) todos los días de la semana

Programa 02: C1 OFF ORT (orto)

Programa 03: C2 ON OCS (ocaso) todos los días de la semana

Programa 04: C2 OFF ORT (orto)

Periodo nocturno

on

OCASO

off

C

P1

1

PREDEFINIDAS

C

2

P3

Estos programas permanecen en memoria aunque se realice un Reset.

Si alguno de estos programas no se ajustan a sus necesidades los puede

modificar o borrar, para ello pulsamos la tecla OK y entramos en MENU ZONA,

con las teclas ∆ y ∇ seleccionamos MENU PROGRAMA y pulsando de nuevo la

tecla OK aparece en pantalla PROG 01. Con las teclas ∆ y ∇ seleccionamos el

número del programa que queremos modificar o borrar y pulsamos OK. Aparece

en pantalla el número de programa y ENTRAR (ejemplo: PROG:02 ENTRAR).

Nuevamente con las teclas ∆ y ∇ seleccionamos ENTRAR si queremos modificar

o BORRAR si queremos eliminar ese programa. Si hemos elegido ENTRAR

aparece en pantalla el programa a modificar. Con las teclas ∆ y ∇ modificamos y

validamos con OK. Si elegimos BORRAR una vez que ha aparecido el programa

en pantalla pulsamos OK y eliminamos ese programa.

PUESTA EN HORA

Pulsando «OK «entramos en MENU ZONA y con las teclas ∆ y ∇, seleccionamos

MENU FECHA, validando con «OK » entramos en FECHA AÑO, en pantalla

aparecen parpadeando los dígitos del año, con las teclas ∆ y ∇ se cambia el valor

del año, con la tecla «OK » validamos el dato. De igual modo introducimos los

datos de MES, DÍA, DÍA DE LA SEMANA, HORA Y MINUTOS, al validar con la

tecla «OK» entramos en ZONA.

CAMBIO DE ZONA GEOGRÁFICA

Si una vez programado el aparato deseamos cambiar la zona, la hora de orto u

ocaso entramos de nuevo en MENU ZONA y procedemos a cambiar los

parámetros necesarios de igual modo que en el apartado Asignación de Zona.

PROGRAMACIÓN

En modo normal pulsar la tecla OK y se accede a MENU ZONA ,con las teclas

∆ y ∇ seleccionamos MENU PROGRAMA,. Pulsamos OK y se muestra en pantalla

PROGRAMA PROG 01, si deseamos programar una maniobra en este programa

pulsamos OK y aparece en pantalla PROG 01 ENTRAR, volvemos a pulsar OK y

elegimos el circuito y la maniobra que deseamos realizar entre: C1 ON, C1 OFF,

C2 ON y C2 OFF. Validamos la selección con OK y seleccionamos el tipo de la

maniobra, que puede ser: Hora fija, Astronómica a la hora del Orto (ORT) o

Astronómica a la hora del ocaso (OCS).

MANIOBRA DE HORA FIJA

Si hemos seleccionado hora fija pulsamos OK e introducimos los datos de hora y

minutos, día o días de la semana en los que deseamos, aceptando o no, día a día,

en los que deseamos que se realice la maniobra y validamos con OK. Si al validar

el último día de la semana con la tecla OK mantenemos esta pulsada

seleccionamos esta maniobra como festivo, aparece en pantalla la palabra

FESTIVOS y el símbolo «

» y al validar con OK, la pantalla nos muestra

PROGRAMA PROG 02.

MANIOBRA ASTRONÓMICA

Una vez elegido el circuito y la maniobra entre C1 ON, C1 OFF, C2 ON y C2 OFF,

nos aparece el tipo de maniobra a escoger. Seleccionamos la maniobra

astronómica de orto (ORT) u ocaso (OCS) que queremos realizar y nos aparece

en pantalla la posibilidad de corregir la hora de orto u ocaso seleccionada. Si

estamos de acuerdo en que se realice en la indicada en pantalla, dejamos la

corrección a cero y validamos hora y minutos con OK. Si deseamos corregirla en

más o en menos, introducimos el tiempo de corrección en hora y minutos (hasta ±

9 horas 59 minutos), mostrándose en pantalla automáticamente la hora en la que

se realizará la maniobra., validamos con OK y a continuación seleccionamos el día

o días de la semana que deseamos que se realice esta maniobra.

Si al validar el último día de la semana con la tecla OK mantenemos esta tecla

pulsada seleccionamos esta maniobra como festivo, aparece en pantalla la

palabra FESTIVOS y el símbolo «

todos los días de la semana

todos los días de la semana

ORTO

P2

MANIOBRAS

P4

«.

Specifications: 1636/1636452-astro_nova_city.pdf file (20 Apr 2023)

Accompanying Data:

Orbis ASTRO NOVA CITY Switch, Timer PDF Instructions For Use (Updated: Thursday 20th of April 2023 12:04:13 PM)

Rating: 4.5 (rated by 47 users)

Compatible devices: DATA LOG BT, ASTRO SAT, DATA MULTI ANUAL, CITYLUX, MINI T, DATA ASTRO, DATA MICRO +, DICROMAT MINI.

Recommended Documentation:

Orbis ASTRO NOVA CITY: Text of Manual, Instructions For Use

(Ocr-Read Version Summary of Contents, UPD: 20 April 2023)

Orbis ASTRO NOVA CITY: Recommended Instructions

PPU PPU-700, HS-3, RX-9010VBK, GV-NX84S256HE, EDENTON L2B1, WRSX1A40

• 

• 

• 

• 

• 

• 

Additional Information:

Popular Right Now:

Operating Impressions, Questions and Answers:

ASTRONOMIC TIME SWITCH

ASTRO NOVA CITY

INSTRUCTIONS FOR USE

DESCRIPTION

The ASTRO NOVA CITY is a time switch designed to control luminous loads in

function of dawn and dusk rimes. It includes a program that automatically adjusts

the dawn lighting-up and dusk switching-off times, without any need for

maintenance. The geographic position location is made by selecting the closest

city to your location from a list of the most important cities in your country.

Its small size of only two modules makes it ideal for installation on boards with little

available space. The unit includes 22 memory spaces in two independent circuits

that can be programmed in an astronomic manner or with fixed times.

INSTALLATION

WARNING: The assembly and installation of the electric apparatus must be

carried out by an authorised installer.

THE ELECTRIC PAOER MUST BE SWITCHED OFF BEFORE COMMENCING

INSTALLATION.

The unit is internally protected against interference by a security circuit. However,

certain especially strong fields could affect correct operation. Interference can be

avoided if the following installation rules are followed:

— The unit must not be installed close to inductive loads

(motors, transformers and contactors etc )

— It is recommended that a separate power line be employed

(fitted with a mains filter if necessary).

— Inductive loads must be fitted with interference suppressors (MOVs, RC filters).

If the time switch is used with other devices in an installation, it will be necessary

to verify that the overall assembly does not generate any parasitic interference.

INSTALLATION: Electronic control device, independently installed in a distribution

cabinet, fitted with 35-mm symmetric profile in accordance with EN 60715 (DIN

rail).

CONNECTION: In accordance with the wiring drawing

PUTTING INTO SERVICE AND INSTALLATION

All programming sections comply with the following rules:

— The data to be modified s identified by flashing. i

— Each press of the Δ

and ∇ keys increases or decreases the flashing data. If it is

maintained pressed, the increase/decrease speed becomes five units per second.

— After the last data item, confirmation is given by OK or, if no key is pressed within

one minute, the unit returns to normal operation:

the screen displays the current

time and the C1 and C2 circuit status.

The dawn and dusk times can be displayed in normal mode by pressing “C”, which

shows AST screen, together with current dawn and dusk times.

To install the ASTRO NOVA CITY as an astronomic time switch, it is only

necessary to enter the ZONE MENU, pressing the OK key and selecting the city

closest to the installation and confirm with OK: The CORR screen displays: NO

and the dawn and dusk times (automatically changes from one to another every

five seconds) corresponding to the selected zone. if no corrections are to be

performed, confirm with OK and the switch is programmed with the two circuits

operating in astronomic mode.

SELECTING LANUGUAGE

Pressing OK enters MENU and with the Δ and ∇ keys select LANGUAGE,

confirming with OK. The Δ and ∇ keys are used to select the desired language,

confirming with OK and returning to the main screen.

ZONE ASSIGNMENT

Pressing OK enters the ZONE MENU, pressing it again enters the city list, the Δ

and ∇ keys are used to select the closest city to the installation zone. Confirm with

OK and the screen displays CORR. NO and the dawn and dusk rimes

alternatively. If the displayed dusk (switch-on) and/or dawn (switch-off) times are to

be modified, «YES” is selected with the Δ and ∇ keys, pressing OK to confirm,

dawn correction is entered and the screen displays CORR. DAWN, the dawn time

and 0:00 in the lower section, which indicates the correction time. Using the Δ and

∇ keys the value is modified increasing or decreasing it up to three hours. Confirm

with OK to display CORR. DUSK and the dusk time, the operation is repeated,

confirmed with OK and returning to the main screen.

MENU

ON

OFF

03 96

12

24

15 18

21

C1 C2

C2C1

1

2

3

4

5

6

7

OKC

C1 circuit status

Day of the week

indicator

Current time

Summer time

Winter time

12-hour

time format

Permanet

channel indicator

C2 circuit status

Vacations or

holiday program

Time scale

Decrease or move up menu /

C1 manual operation

Go back

Confirm screen option /

Access menu

Decrease or move down menu /

C2 manual operation

Screen

PREDEFINED PARAMETERS

The time switch leaves the factory programmed in the country language, set to the

official country date and time, with the zone set to the first alphabetical city to the

list, and 4 pre-established programs.

Program 01: C1 ON DUSK for all days of the week

Program 02: C1 OFF DAWN for all days of the wee k

Program 03: C2 ON DUSK for all days of the week

Program 04: C2 OFF DAWN for all days of the week

P1

P3

P2

P4

on

PREDEFINED

OPERATIONS

DUSK DAWN

Night period

off

C

1

C2

These programs remain in memory even if a reset is performed.

If any of these programs is not suitable, it can be modified or deleted by pressing

OK and entering the ZONE MENU, selecting PROGRAM MENU with the Δ and ∇

keys and pressing OK again to display PROG 01. The program to be modified or

deleted in selected with the Δ and ∇ keys and OK is pressed. The program

number is displayed onscreen with ENTER (example: PROG:02 ENTER). Again

with the Δ and ∇ keys ENTER is selected if the program is to be modified or

DELETE if it is to be eliminated. If ENTER has been selected, the program to be

modified will be displayed. The Δ and ∇ keys are used to modify and OK to

confirm. If DELETE is selected, once the program has appeared onscreen, OK is

pressed and the program is deleted.

SETTING THE TIME

Pressing OK enters the ZONE MENU and the Δ and ∇ keys are used to select

DATE MENU, confirmed with OK to enter YEAR DATE with the year digits flashing

on the screen and the Δ and ∇ keys are used to change the year value with OK

confirming the entered digits. The MONTH, DAY, DAY OF THE WEEK, TIME and

MINUTES are similarly entered, confirming with OK to enter in ZONE.

CHANGING THE GEOGRAPHIC ZONE

If, once the unit is programmed we wish to change the zone, the dawn or dusk

times, ZONE MENU is entered again and the necessary parameters are changed

in the same way as in the Zone Assignment section.

PROGRAMMING

In normal mode press the OK key to access the ZONE MENU and select

PROGRAM MENU with the Δ and ∇ keys. OK is pressed and PROGRAM PROG

01 is displayed onscreen, if an operation is to be programmed in this program

press OK to display PROG 01 ENTER, press OK again and select the circuit and

the operation to be executed from: C1 ON, C1 OFF, C2 ON and C2 OFF. Confirm

the selection with OK and select the operation type, which may be: Fixed time,

Dawn (DAWN) astronomic time or Dusk (DUSK) astronomic time.

FIXED TIME OPERATION

If fixed time is selected, press OK and enter the hour and minutes, day or days of

the week information in those desired accepting or not, day by day, in those for

which the operation is to be performed, confirming with OK. If, when confirming the

day of the week with the OK key, this is maintained pressed, the operation will be

selected as a holiday, the word HOLIDAYS is displayed onscreen, together with

the symbol “ ···· ” and confirm with OK, the screen will display PROGRAM PROG

02.

12

3

N

L

4

56

C1

C2

ASTRONOMIC OPERATION

Once the circuit is selected, together with the operation between C1 ON, C1 OFF,

C2 ON and C2 OFF, the type of operation to choose is displayed. The dawn

(DAWN) or dusk (DUSK) operation that is to be performed is selected and the

screen displays the possibility to correct the time for the displayed dawn or dusk

time. If we agree with the screen display the correction is left at zero and the hours

and minutes are confirmed with OK. If it is to corrected by more or less, the

correction time is entered in hours and minutes (up to ± 9 hours and 59 minutes),

automatically displaying the time at which the operation is to be performed, confirm

with OK then select the day or days of the week on which this operation is to be

carried out.

If, on confirming the last day of the week with the OK key, this is maintained

pressed, the operation will be selected as a holiday, the word HOLIDAYS is

displayed onscreen, together with the symbol “ ”.

WARNING: If an operation is programmed on a holiday, the HOLIDAYS

program cannot be used and is removed from the menu remaining as a

HOLIDAY period.

If astronomic (dawn — dusk) operations are programmed in the same circuit and

fixed time, they could overlap since astronomic operations move forward and

backward during the year and could lead to incorrect operations.

For example: A shop window lights are to be switched on at nightfall (astronomic

operation) and are to be switched off again at 21:30 (fixed time operation). Since

the astronomic switch-on operation is moved forward during summer, there will be

a time when dusk will fall after 21:30 and the switch-on will occur after the

programmed switch-off time so that no actual switch-off will occur and the lights

will remain on until another switch-off command.