Руководстве по эксплуатации chrysler town country

1. Manuals
2. Brands
3. Chrysler Manuals
4. Automobile
5. Town and Country
6. Owner’s manual

2010

• Page 1
  Town & Country 2 0 1 0 O W N E R ’ S M A N U A L…

• Page 2: Introduction

  TABLE OF CONTENTS SECTION PAGE …………3 INTRODUCTION .

• Page 4: Table Of Contents

  INTRODUCTION CONTENTS Introduction ……4 Vehicle Identification Number ….6 How To Use This Manual .

• Page 5: Introduction

  4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality — all your satisfaction.

• Page 6
  INTRODUCTION 5…

• Page 7: Vehicle Identification Number

  6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.

• Page 8: Vehicle Modifications/Alterations

  INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.

• Page 10: Things To Know Before Starting Your Vehicle

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ….12 Remote Starting System — If Equipped ..27 Wireless Ignition Node (WIN) .

• Page 11
  10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Sliding Side Door — If Equipped ..42 Seat Belt Extender ….. 67 Sliding Side Door Child Protection Lock .
• Page 12
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Restraining Infants And Small Children With Exhaust Gas ……101 Seat Delete Feature (Commercial Vehicles Safety Checks You Should Make Inside The Only) .

• Page 13: Things To Know Before Starting Your Vehicle 9

  12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch.

• Page 14
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.

• Page 15: Sentry Key

  14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Power window switches will also remain active Key-In-Ignition Reminder for up to 90 seconds after the ignition switch has been Opening the driver’s door when the Key Fob is in the turned to LOCK, depending upon the accessory delay ignition and the ignition switch position is LOCK or setting.

• Page 16: Replacement Keys

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 vehicle can be used to start and operate the vehicle. The CAUTION! system will shut the engine off in two seconds if an invalid Key Fob is used to start the engine. The Sentry Key Immobilizer system is not compat- ible with some after-market remote starting systems.

• Page 17: Vehicle Security Alarm — If Equipped

  16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming CAUTION! Programming Key Fobs or RKE transmitters may be performed at an authorized dealer. Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. General Information The Sentry Key system complies with FCC rules Part 15 At the time of purchase, the original owner is provided…

• Page 18: Rearming Of The System

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 lamps and/or turn signals will flash and Vehicle Security locked and closed, the Vehicle Security Light in the Light will flash repeatedly and the horn will sound. For instrument cluster will flash rapidly to signal that the an additional 15 minutes, only the headlights, park lamps Vehicle Security Alarm is arming.

• Page 19: Illuminated Entry — If Equipped

  18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Vehicle Security Alarm remains armed during exterior lights will flash, the horn will sound. If this liftgate entry. Pressing the liftgate button will not occurs, disarm the Vehicle Security Alarm. disarm the Vehicle Security Alarm.

• Page 20: Remote Keyless Entry (Rke) — If Equipped

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: NOTE: Inserting the Key Fob with RKE transmitter into • The front courtesy overhead console and liftgate lights the ignition switch disables all buttons on that RKE do not turn on if the dimmer control is in the interior transmitter;…

• Page 21: Using The Rke Transmitter

  20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using the RKE Transmitter (optional), power sliding doors, Remote Start feature Three-button RKE transmitters will provide basic UN- (optional). Some features can be programmed to the LOCK, LOCK and PANIC functions. customers preferences. For example, flash headlights or sound horn on LOCK.

• Page 22
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Remote Unlock Doors and Liftgate 1. Perform this operation while standing outside the Press and release the UNLOCK button on the RKE vehicle. transmitter once to unlock the driver’s side or twice to 2.
• Page 23
  22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pressing the LOCK button on the RKE transmit- Sound Horn with Remote Lock ter while you are inside the vehicle will activate the This feature will cause the horn to chirp when the doors Vehicle Security Alarm.
• Page 24
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 2. Press the LOCK button on a programmed RKE trans- Using the Panic Alarm mitter for at least 4 seconds, but no longer than 10 sec- To turn the Panic Alarm feature on or off, press and hold onds.
• Page 25
  24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the liftgate is locked and is not equipped with a Power Open/Close Right Power Sliding Door — If powered liftgate, pressing the LIFTGATE button twice Equipped will result in the liftgate becoming unlocked for 30 sec- Press the RIGHT Power Sliding Door button twice on the onds allowing you to manually access the liftgate area.
• Page 26
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following steps: ter while you are in the vehicle will activate the Vehicle Security Alarm.
• Page 27
  26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Replacement General Information The recommended replacement battery is one CR2032 This device complies with Part 15 of the FCC rules and battery. RSS 210 of Industry Canada. Operation is subject to the following conditions: NOTE: •…

• Page 28: Remote Starting System — If Equipped

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • Brake switch inactive (brake pedal not pressed) REMOTE STARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry • Ignition key removed from ignition switch (RKE) transmitter to start the engine conve- •…

• Page 29
  28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive 15-minute To Enter Remote Start Mode Press and release the REMOTE START button cycles with the RKE transmitter. However, the ignition on the RKE transmitter twice within five sec- switch must be turned to the ON position before you onds.
• Page 30
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The hood is opened equipped). Then, prior to the end of the 15-minute cycle, insert the Key Fob into the ignition switch and turn the • The hazard switch is pressed switch to the ON position.

• Page 31: Door Locks

  30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE failed start, where the Remote Starting sequence was initiated but the engine stopped cranking without start- ing. After either of these conditions, or if the Vehicle Security Alarm system is alarming, or if the PANIC button was pressed, the vehicle must be reset by inserting a valid Key Fob into the ignition switch and rotating the Key Fob to the ON position, and then rotating the Key…

• Page 32
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 If the lock plunger is rearward when you shut either side WARNING! sliding door, the door will lock. Make sure the keys are • For personal security and safety in the event of an not inside the vehicle before closing the door.

• Page 33: Power Door Locks — If Equipped

  32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks — If Equipped If you press the power door lock switch while the Key A power door lock switch is on each front door trim Fob is in the ignition, and any front door is open, the panel.

• Page 34
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Lock Doors Automatically — If Equipped If the Lock Doors Automatically feature is enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The Lock Doors Automatically feature is enabled when your vehicle is shipped from the assembly plant and can be disabled by using the following procedure: •…
• Page 35
  34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Fasten your seat belt. (Fastening the seat belt will The Lock Doors Automatically at 15 mph (24 km/h) cancel any chiming that may confuse you during this feature can be reactivated by repeating the above men- programming procedure.) tioned procedure or by performing the procedure in the EVIC (if equipped), Personal Settings (Customer-…
• Page 36
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • On vehicles equipped with the optional Electronic 5. Within 30 seconds, press the driver’s door lock switch Vehicle Information Center (EVIC), refer to “Electronic in the UNLOCK direction. Vehicle Information Center (EVIC)/Personal Settings 6.

• Page 37: Windows

  36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows You can control either the front or rear windows using Power Vent Windows — If Equipped switches located on the driver’s door trim panel. The Switches on the driver’s door trim panel let the driver switches will operate only when the ignition switch is in operate the two vent windows from the driver’s seat.

• Page 38
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 NOTE: Power Window switches will also remain active for up to 10 minutes after the ignition switch has been turned to LOCK, depending upon the accessory delay setting. Opening a front door will cancel this feature. Power Window Lockout Switch —…
• Page 39
  38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front Passenger Power Window Switch There is a single switch on the front passenger’s door trim panel which operates the passenger door window and locks and unlocks all doors. The switch will operate only when the ignition switch is in the ON or ACC position and during power accessory delay.
• Page 40
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Sliding Side Door Power Window Switch — If Equipped Second row passengers may open and close the sliding door window by a single switch on the door handle assembly. The switches will operate only when the ignition switch is in the ON or ACC position and during power acces- sory delay.
• Page 41
  40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Down Feature — If Equipped To stop the window from going all the way up during the The front window switches may be equipped with an Auto Up operation, push down on the switch briefly. Auto-Down feature.

• Page 42: Sliding Side Door

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Wind Buffeting WARNING! Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the There is no anti-pinch protection when the window ears. Your vehicle may exhibit wind buffeting with the is almost closed.

• Page 43: Power Sliding Side Door — If Equipped

  42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To keep your door operating properly, observe the fol- NOTE: The left side sliding door cannot be opened lowing guidelines: while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the •…

• Page 44
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 There are power sliding side door switches located on the trim panel just in front of the power sliding door for the rear seat passengers and in the overhead console for the driver and passengers.
• Page 45
  44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To avoid unintentional operation of the power sliding door switch is pressed. To close the door, wait until it doors from the rear seats, press the power sliding door is fully open and then press the switch again. master lock button, located in the overhead console, to •…
• Page 46
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 The Sliding Side Door Open Flash can be enabled or When the power sliding door master lock switch is in the ON position, the power sliding side door may not be disabled by performing the following procedure: opened or closed by pressing the switch located on the 1.

• Page 47: Sliding Side Door Child Protection Lock

  46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a Child Protection Door Lock system. NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.

• Page 48
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 • When the Child Protection Door Lock system is en- WARNING! gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the Avoid trapping anyone in the vehicle in a collision.

• Page 49: Liftgate

  48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To open the liftgate, press the liftgate release handle • After setting the Child Protection Door Lock system, located on the underside of the license plate bar and pull always test the door from the inside to make certain it the liftgate open with one fluid motion.

• Page 50: Power Liftgate — If Equipped

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 If the liftgate is locked and is not equipped with the power liftgate feature, pressing the button on the RKE transmitter will result in the liftgate becoming unlocked for 30 seconds allowing you to manually access the liftgate area.

• Page 51
  50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may be closed by pressing the button, When the RKE transmitter button is pressed and the located in the upper left trim in the liftgate opening. Flash Lights feature is enabled, the tail lights will flash to Pushing once will only close the liftgate.
• Page 52
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 • There are also pinch sensors attached to the side of the (62°C). Be sure to remove any buildup of snow or ice liftgate opening. Light pressure anywhere along these from the liftgate before pressing any of the power strips will cause the liftgate to return to the open liftgate buttons.

• Page 53: Occupant Restraints

  52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Seat-Mounted Side Airbags (SAB) — if Gas props support the liftgate in the open position. However, because the gas pressure drops with tempera- equipped ture, it may be necessary to assist the props when •…

• Page 54: Lap/Shoulder Belts

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 NOTE: The Advanced Front Airbags have a multistage Buckle up even though you are an excellent driver, even inflator design. This allows the airbag to have different on short trips. Someone on the road may be a poor driver rates of inflation based on the severity and type of and cause a collision that includes you.

• Page 55
  54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE you under normal conditions. However, in a collision the WARNING! (Continued) belt will lock and reduce the risk of you striking the • Wearing a seat belt incorrectly is dangerous. Seat inside of the vehicle or being thrown out. belts are designed to go around the large bones of your body.
• Page 56
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the rear seats. Grasp the latch plate and pull out the belt.
• Page 57
  56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click”. • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury.
• Page 58
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up • A belt that is buckled into the wrong buckle will on the shoulder belt.
• Page 59
  58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
• Page 60
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Pull the strap down and secure the small latch plate of simultaneously pushing down on the anchorage assem- the lap belt into the small buckle until you hear a “click”. bly. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck.

• Page 61: Automatic Locking Retractors (Alr) Mode — If Equipped

  60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average you will How To Engage The Automatic Locking Mode prefer a lower position, and if you are taller than average 1. Buckle the combination lap and shoulder belt. you will prefer a higher position.

• Page 62: Seat Belt Pretensioners — If Equipped

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Seat Belt Pretensioners — If Equipped Supplemental Active Head Restraints (AHR) — If The seat belts for both front seating positions may be Equipped equipped with pretensioning devices that are designed to These head restraints are passive, deployable compo- remove slack from the seat belt in the event of a collision.

• Page 63
  62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact.
• Page 64
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
• Page 65
  64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mecha- nism 4. The AHR front soft foam and trim half should lock 1 —…

• Page 66: Enhanced Seat Belt Use Reminder System (Beltalert )

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Enhanced Seat Belt Use Reminder System (BeltAlert ) If the driver’s or front passenger’s (if equipped with belt alert) seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced Warning System (BeltAlert ) will alert the driver or front passenger to buckle the seat belt.

• Page 67
  4. Turn the ignition switch to the LOCK position. A 60 seconds of the ignition switch being turned to the ON single chime will sound to signify that you have success- or START position. Chrysler Group LLC does not recom- fully completed the programming. mend deactivating BeltAlert .

• Page 68: Seat Belts And Pregnant Women

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 NOTE: Although BeltAlert has been deactivated, the Seat Belt Extender Seat Belt Reminder Light will continue to illuminate If a seat belt is too short, even when fully extended and while the driver’s seat belt remains unbuckled or when the adjustable upper shoulder belt anchorage (if retracted.

• Page 69: Supplemental Restraint System (Srs) — Airbags

  68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) — Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air- bag is mounted in the center of the steering wheel.

• Page 70: Airbag System Components

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 The Advanced Front Airbags have a multistage inflator NOTE: • Airbag covers may not be obvious in the interior trim; design. This allows the airbag to have different rates of inflation based on the severity and type of collision. but they will open during airbag deployment.

• Page 71: Advanced Front Airbag Features

  70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Seat-Mounted Side Airbags (SAB) the second stage determines whether the output force is low, medium, or high. If a low output is sufficient to meet • Supplemental Side Airbag Inflatable Curtains (SABIC) the need, the remaining gas in the inflator is expended.

• Page 72
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 WARNING! (Continued) • Do not drill, cut or tamper with the knee bolster in any way. • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc.
• Page 73
  72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Airbag Inflatable Curtain The system includes side impact sensors adjacent to both (SABIC) — If Equipped front and rear seat occupants that are calibrated to deploy SABIC airbags may offer side-impact and vehicle rollover the SABIC airbags during impacts that require airbag protection to front and rear seat outboard occupants in occupant protection.
• Page 74
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Knee Impact Bolsters WARNING! The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position front occu- Infants in rear-facing child restraints should NEVER pants for the best interaction with the Advanced Front ride in the front seat of a vehicle with a passenger Airbags.
• Page 75
  74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a child from 1 to 12 years old (not in a rear facing child If the airbag system in this vehicle needs to be modified seat) must ride in the front passenger seat, move the seat to accommodate a disabled person, contact the Customer as far back as possible and use the proper child restraint.

• Page 76: Airbag Deployment Sensors And Controls

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 ORC deploys the Advanced Front Airbags, SABIC air- WARNING! (Continued) bags — if equipped, Supplemental Seat-Mounted Side • Being too close to the steering wheel or instrument Airbags — if equipped, and front seat belt pretensioners panel during Advanced Front Airbag deployment —…

• Page 77
  76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Airbags may deploy in crashes with in the ACC position, or not in the ignition, the airbag little vehicle front-end damage but that produce a severe system is not on and the airbags will not inflate. initial deceleration.
• Page 78
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 separate and fold out of the way as the airbags inflate to WARNING! their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to Ignoring the Airbag Warning Light in your instru- blink your eyes.
• Page 79
  78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE triggered, releasing a quantity of non-toxic gas. The covers the window. The airbag inflates in about 30 ms inflating side airbag exits through the seat seam into the (about one-quarter of the time that it takes to blink your space between the occupant and the door.
• Page 80
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Enhanced Accident Response System NOTE: Front and/or side airbags will not deploy in all In the event of an impact causing airbag deployment, if collisions. This does not mean something is wrong with the communication network remains intact, and the the airbag system.
• Page 81
  80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE airbag inflation. These airborne particles may irritate Maintaining Your Airbag System the skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
• Page 82
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Airbag Warning Light WARNING! (Continued) You will want to have the airbags ready to • Do not attempt to modify any part of your ad- inflate for your protection in a collision. The vanced airbag system.

• Page 83: Event Data Recorder (Edr)

  In the event of a collision, your vehicle is designed to used by Chrysler Group LLC and others to learn more record up to five seconds of specific vehicle data param- about the possible causes of crashes and associated…

• Page 84
  Confidential • Vehicle speed data will not be disclosed by Chrysler Group LLC to any third party except when: • Engine RPM • Brake switch status…

• Page 85: Integrated Child Booster Seat — If Equipped

  84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Pedal position • And other parameters depending vehicle configuration Integrated Child Booster Seat — If Equipped The Integrated Child Booster Seat (if equipped) is located in each second-row passenger seat. The booster seat is designed for children weighing between 48 and 85 lbs (22 and 39 kg) and between 47 in (119 cm) and 57 in (145 cm) tall.

• Page 86
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 WARNING! (Continued) • The swivel seat should be locked in the forward- facing position when using the booster seat with the vehicle in motion. • Be certain that the seat cushion is locked securely into position before using the seat.

• Page 87: Integrated Child Seat — If Equipped

  86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Once the seat belt is long enough to fit properly, insert Integrated Child Seat — If Equipped the latch plate into the buckle until you hear a “click.” Operating instructions for the second row bench seat with Integrated Child Seat are included with the seat.

• Page 88: Child Restraints

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 To obtain Integrated Child Seat replacement instruc- WARNING! tions: Refer to “Publication Order Forms” in If You Need Consumer Assistance and specify publication number In a collision, an unrestrained child, even a tiny baby, 81–016–8050 when ordering.

• Page 89
  88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Safety experts recommend that children ride WARNING! rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types Rearward-facing child seats must NEVER be used in of child restraints can be used rearward-facing: infant the front seat of a vehicle with a front passenger carriers and convertible child seats.
• Page 90
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 vehicle by the lap/shoulder belt or the LATCH child WARNING! restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)”. Never place any child seat, booster seat, or infant carrier in the Swivel ’n Go seat while it is in the An aftermarket belt-positioning booster seat is for chil- rearward-facing position.
• Page 91
  90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The lap portion should be low on the hips and as snug WARNING! as possible. • Improper installation can lead to failure of an • Check belt fit periodically. A child’s squirming or infant or child restraint.
• Page 92
  Safety necessary. Standards. Chrysler Group LLC also recommends that • In the rear seat, you may have trouble tightening the you make sure that you can install the child restraint in the vehicle where you will use it, before you buy it.
• Page 93
  92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Buckle the child into the seat according to the child installed as described here. Again, carefully follow the restraint manufacturer’s directions. installation instructions that are provided with the child restraint system. •…
• Page 94
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 third row fold-in-floor seats are equipped with a child WARNING! restraint tether anchor at the center seating position. Improper installation of a child restraint to the NOTE: LATCH anchorages can lead to failure of an infant or •…
• Page 95
  94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If your child restraint seat is not LATCH-compatible, 4. Tighten the lower attachment strap while firmly push- install the restraint using the vehicle seat belts. ing the child restraint rearward and downward into the vehicle seat.
• Page 96
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Installing the Top Tether Strap (with either Lower Anchors or Vehicle Seat Belt): 1. Route the top tether strap under the adjustable head restraint between the steel posts. 2. Provide enough slack (reference child restraint in- structions) for the tether strap to reach the tether anchor located near the bottom of the seat back.
• Page 97
  96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE then allow the belt to retract into the retractor. For WARNING! additional information on ALR, refer to “Automatic Locking Mode”. An incorrectly anchored tether strap could lead to increased head motion and possible injury to the To install a child restraint, first, pull enough of the seat child.

• Page 98: Rear Seat Delete Feature (Commercial Vehicles Only) — If Equipped

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Transporting Pets WARNING! Airbags deploying in the front seat could harm your pet. An unrestrained pet could be thrown about and possibly NEVER carry a child in a rear facing infant carrier in injured, or injure a passenger during panic braking or in a vehicle without rear seats.

• Page 99: Restraining Infants And Small Children With Seat Delete Feature (Commercial Vehicles Only)

  98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The rearward-facing infant carrier is for babies weigh- This vehicle is equipped with a child restraint tether anchor located on the lower rear of the front passenger ing up to about 20 lbs (9 kg), and less than one year seat.

• Page 100
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 • Children more than 40 lbs (18 kg) should be secured in 3. Route the tether strap under the head rest. the passenger seat in a child restraint or belt- NOTE: Ensure that the child restraint tether strap is positioning booster seat with the seat adjusted to the centered between the headrest supports underneath the rear most position.

• Page 101: Engine Break-In Recommendations

  100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration within the WARNING! limits of local traffic laws, contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- The vehicle tether anchor is designed to be used with mental and should be avoided.

• Page 102: Safety Tips

  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 SAFETY TIPS WARNING! (Continued) Transporting Passengers • Be sure everyone in your vehicle is in a seat and NEVER TRANSPORT PASSENGERS IN THE CARGO using a seat belt properly. AREA. Exhaust Gas WARNING! WARNING! •…

• Page 103: Safety Checks You Should Make Inside The Vehicle

  102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If it is necessary to sit in a parked vehicle with the engine inspect the exhaust system each time the vehicle is raised running, adjust your heating or cooling controls to force for lubrication or oil change.

• Page 104
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 authorized dealer. If the light stays on, flickers, or comes WARNING! on while driving, have the system checked by an autho- rized dealer. Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- Defroster sonal injury.

• Page 105: Periodic Safety Checks You Should Make Outside The Vehicle

  104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside WARNING! (Continued) the Vehicle • Check mounting of mats on a regular basis. Al- Tires ways properly reinstall and secure floor mats that Examine tires for excessive tread wear and uneven wear have been removed for cleaning.

• Page 106
  THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately.

• Page 108: Understanding The Features Of Your Vehicle

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ……112 Tilt Mirrors In Reverse (Available With Memory Seat Only) —…

• Page 109
  108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seats ……126 Third Row Power Recline — If Equipped . . . 149 Manual Front And Second Row Seat Driver Memory Seat —…
• Page 110
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Headlight Delay — If Equipped ..163 Adjustable Pedals — If Equipped ..172 Daytime Running Lights Electronic Speed Control —…
• Page 111
  110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service Parksense ….183 Security ……197 Cleaning Parksense .
• Page 112
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Door Trim Panel Storage ….209 Console Features ….. . 215 Driver Seatback Storage —…

• Page 113: Mirrors

  112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).

• Page 114: Automatic Dimming Mirror — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Automatic Dimming Mirror — If Equipped CAUTION! This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or To avoid damage to the mirror during cleaning, never off by pressing the button at the base of the mirror.

• Page 115: Driver’s Automatic Dimming Mirror — If Equipped

  114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirror Folding Feature WARNING! All outside mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have Vehicles and other objects seen in an outside convex three detent positions: full forward, full rearward and mirror will look smaller and farther away than they normal.

• Page 116: Heated Mirrors — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Driver’s side power mirror preselected positions can be controlled by the optional Driver Memory Seat Feature. Refer to “Driver Memory Seat” in “Understanding the Features of Your Vehicle” for further information. Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice.

• Page 117: Illuminated Vanity Mirrors — If Equipped

  116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE when the vehicle is shifted out of REVERSE position. Illuminated Vanity Mirrors — If Equipped Each stored memory setting will have an associated Tilt An illuminated vanity mirror is located on the sun visor. Mirrors in Reverse position.

• Page 118: Blind Spot Monitoring — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 BLIND SPOT MONITORING — IF EQUIPPED When the vehicle is started, the BSM warning light will The Blind Spot Monitoring (BSM) system uses two radar- be momentarily illuminated in both outside rear view based sensors, located inside the rear bumper fascia, to mirrors to let the driver know that the system is opera- detect Highway licensable vehicles (automobiles, trucks,…

• Page 119
  118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.e., bicycle, sports equipment) extends beyond the side of your vehicle, this may result in the BSM warning light remaining illuminated the entire…
• Page 120
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 The BSM system notifies the driver of objects in the The BSM system can also be configured to sound an detection zones by illuminating the BSM warning light audible (chime) alert and mute the radio to notify the located in the outside mirrors.
• Page 121
  120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
• Page 122
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Overtaking Traffic If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
• Page 123
  122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc.

• Page 124: Rear Cross Path

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicles mirrors, glance over your shoulder, and use your turn signal before changing lanes.

• Page 125: Modes Of Operation

  124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In a parking lot situation, oncoming vehicles can Modes Of Operation be obscured by vehicles parked on either side. If the Three selectable modes of operation are available in the sensors are blocked by other structures or vehicles, the Electronic Vehicle Information Center (EVIC).

• Page 126: Uconnect™ Phone — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 signal is then activated, and it corresponds to an alert Blind Spot Alert Off present on that side of the vehicle, an audible chime will When the BSM system is turned off there will be no also be sounded.

• Page 127: Voice Command — If Equipped

  126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE VOICE COMMAND — IF EQUIPPED WARNING! Voice Command can be initiated by pressing the VR • DO NOT allow people to ride in any area of your button located on the radio or steering wheel vehicle that is not equipped with seats and seat controls (if equipped).

• Page 128: Manual Front And Second Row Seat Adjuster

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Manual Front And Second Row Seat Adjuster WARNING! The adjusting bar is located under the front of the seat. Pull the bar upward and move the seat to the desired Adjusting a seat while the vehicle is moving is position.

• Page 129: Manual Reclining Seats — If Equipped

  128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Reclining Seats — If Equipped WARNING! The recliner control lever is on the outboard side of the seat. To recline, lean forward slightly, lift the lever, then DO NOT ride with the seatback reclined so that the push back to the desired position and release the lever.

• Page 130: Manual Lumbar Adjust Lever — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Manual Lumbar Adjust Lever — If Equipped WARNING! The lumbar adjustment lever is located on the outboard side of the seat. To increase the support, rotate the lever Adjusting a seat while the vehicle is moving is downward.

• Page 131: Eight-Way Power Seats — If Equipped

  130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Eight–Way Power Seats — If Equipped WARNING! The power seat switches are located on the outboard side of the seats. The front switch controls the up/down, Adjusting a seat while the vehicle is moving is forward/rearward and tilt adjustment.

• Page 132: Heated Seats — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. After turning the ignition ON, you can choose from High, Low, or Off heat settings.

• Page 133: Adjusting Head Restraints

  132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Persons who are unable to feel pain to the skin Repeated overheating of the seat could damage the because of advanced age, chronic illness, diabetes, heating element and/or degrade the material of the spinal cord injury, medication, alcohol use, ex- seat.

• Page 134
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Adjusted Head Restraint Push Button To raise the head restraint, pull upward on the head Active Head Restraint — If Equipped restraint (on some models, you may need to press the For comfort the Active Head Restraints can be tilted push button).
• Page 135
  134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only.
• Page 136
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Do not place items over the top of the Active Head Head Restraints (AHR)” in “Things to Know Before Restraint, such as coats, seat covers or portable Starting Your Vehicle”…

• Page 137: Stow ‘N Go Seating — If Equipped

  136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stow ’n Go Seating — If Equipped On vehicles equipped with Stow ’n Go seating, the second and third row seats may be folded into the floor for convenient storage. To Fold Second Row Seats 1.

• Page 138
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 4. Pull up on the seatback recliner lever located on the 5. Pull rearward on the release strap located at the rear of outboard side of the seat and fold the seatback down. To the seat and tumble the seat forward into the storage bin.
• Page 139
  138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Pull up on the handle to lift the seat out of the storage CAUTION! bin and push the seat rearward to latch the seat anchors. The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.

• Page 140: Easy Access Seating

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 To tilt the seat, pull forward on the release strap located on the front of the seat between the seatback and seat cushion and tilt the seat fully forward. To return the seat to its upright position, push rearward on the seatback until it latches.

• Page 141: Swivel ‘N Go™ Premium Seating — If Equipped

  140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Seats are removable WARNING! In the event of a collision you could be injured if the seat is not fully latched. Swivel ’n Go™ Premium Seating — If Equipped Premium second row Swivel ’n Go™ Seating features include: •…

• Page 142
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 WARNING! When the seatback release handle is lifted, the seat- back will rotate forward. To avoid injury, if you are not seated in the seat, stay clear from the area in the path of the rotating seatback. To swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation.
• Page 143
  142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removing Swivel ’n Go™ Premium Seating — If WARNING! Equipped Failure to comply with the following conditions 1. Remove any obstructions from the floor behind the could result in serious injury or even death: seat, and stow the third row seat.
• Page 144
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 3. From behind the seat, lift up on the rear of the seat When reinstalling the seat, make certain to lower the cushion while pulling the seat in a rearward direction. release handle to ensure the seat is latched securely. 4.
• Page 145
  144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Swivel ’n Go™ Premium Seating Table — If 1. Open the floor storage cover in front of the second row Equipped seats. The Swivel ’n Go™ Seating Table consists of an easily assembled post and top. Table and Leg Storage 2.
• Page 146
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 4. Insert pole into base by aligning the lock button into 5. Twist the pole in a clockwise rotation until it stops. notch of the base. NOTE: You will hear an audible “click” when the lock button engages the base.
• Page 147
  146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To separate the table top from the pole, follow these WARNING! steps: Failure to comply with the following conditions 1. Locate the release latch on the underside of the table could result in serious injury or even death: top.
• Page 148
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 2. Pull horizontally on the latch to activate the release 6. Place the pole on the underside of the table top and from the pole. secure with the hook and loop straps. 3. While pulling on the latch, pull upward to remove the 7.

• Page 149: Second Row Bench Seat — If Equipped

  148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor, it is removable for added cargo space. Release levers are located on the rear leg assemblies, near the floor. To remove the seat, squeeze each release handle and rotate downwards to deploy the wheels.

• Page 150: Third Row Power Recline — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 WARNING! If not properly latched, the bench seats could become loose. Personal injuries could result. After reinstall- ing these seats, be sure the red indicator button on the release handles return into the handles. Third Row Power Recline —…

• Page 151
  150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The switch is only functional when the liftgate is open Left and right third row seats can be folded individually and the vehicle is in PARK. or together. The third row power folding seat adjusts to the following positions using the switch bank located on the left rear trim panel: One Touch Folding Seat Third Row…
• Page 152
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: 2. Pull release strap marked “1” located on the rear of the • Disconnect the center shoulder belt from the small seat to lower the seatback. buckle and lower the head restraints before attempting 3.
• Page 153
  152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold Third Row Seats Tailgate Mode 1. Pull up on the assist strap to lift the seat out of the 1. Pull release strap “2”, then pull release strap “3” to storage bin and push the seat forward until the anchors rotate the entire seat rearward.

• Page 154: Driver Memory Seat — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! To avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode. DRIVER MEMORY SEAT — IF EQUIPPED The Memory Buttons 1 and 2 on the driver’s door panel can be programmed to recall the driver’s seat, driver’s outside mirror, adjustable brake and accelerator pedals, and radio station preset settings.

• Page 155: Setting Memory Positions And Linking Rke

  154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions and Linking RKE 5. Turn on the radio and set the radio station presets (up Transmitter to Memory to 10 AM and 10 FM stations can be set). NOTE: Each time the SET (S) button and a numbered 6.

• Page 156
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 11. Select Remote Linked to Memory in the Electronic To recall the memory setting for driver two, press Vehicle Information Center (EVIC) and enter “Yes”. Refer MEMORY button 2 on the driver’s door or the UNLOCK to “Electronic Vehicle Information Center (EVIC)/ button on the RKE transmitter linked to Memory Position Customer-Programmable Features”…

• Page 157: Easy Entry/Exit Seat (Available With Memory Seat Only)

  156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Press and release the memory SET (S) button located Customer-Programmable Features in “Understanding on the driver’s door. A chime will sound signaling that Your Instrument Panel” for further information. you are in the memory set mode. Easy Entry/Exit Seat (Available with Memory Seat 4.

• Page 158
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 • When you remove the key from the ignition switch the NOTE: The Easy Entry/Easy Exit feature can be en- driver seat will move to a position 0.3 in (7.7 mm) abled or disabled through the programmable features in forward of the rear stop if the driver seat position is the Electronic Vehicle Information Center (EVIC).

• Page 159: To Open And Close The Hood

  158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Move to the front of the vehicle and look inside the To open the hood, two latches must be released. center of the hood opening. Locate, then push the safety catch lever to the right, while raising the hood at the same 1.

• Page 160: Lights

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 LIGHTS CAUTION! All of the lights, except the Hazard Warning lights, headlight high beams and flash-to-pass, are controlled by To prevent possible damage, do not slam the hood to switches to the left of the steering column on the instru- close it.

• Page 161: Interior Lighting

  160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lighting Dome Light Positions Interior lights are turned on when a door or liftgate is Rotate the dimmer control completely opened, the Remote Keyless Entry (RKE) transmitter is upward to the second detent (extreme activated, or when the dimmer control is moved to the top position) to turn on the interior extreme top.

• Page 162: Parking Lights

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Parade Mode (Daytime Brightness Feature) Halo Lights — If Equipped Rotate the dimmer control to the first Halo lights are strategically placed soft lighting that help detent. This feature brightens the to illuminate specific areas to aid the occupants in odometer, radio and overhead dis- locating specific features while driving at night.

• Page 163: Automatic Headlights — If Equipped

  162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To change the brightness of the instrument panel lights, rotate the dimmer control up or down. Automatic Headlights — If Equipped This system automatically turns your headlights on or off based on ambient light levels. To turn the system on, turn the headlight switch to the extreme counterclockwise position aligning the indicator with the “A”…

• Page 164: Headlights On With Wipers — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Headlights On With Wipers — If Equipped When exiting the vehicle the driver can choose to have When your headlights are in the Automatic mode and the the headlights remain on for 30, 60, or 90 seconds or not engine is running, the headlights will automatically turn remain on.

• Page 165: Daytime Running Lights (Canada/Fleet Vehicles Only)

  164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights (Canada/Fleet Vehicles Battery Protection Only) This feature provides battery protection to avoid wearing The headlights on your vehicle will illuminate when the down the battery if the headlights, parking lights, or engine is started and the transmission is in any gear front fog lights are left on for extended periods of time except PARK.

• Page 166: Multifunction Lever

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Multifunction Lever The multifunction lever is located on the left side of the steering column. The multifunction lever controls the: • Turn Signals • Headlight Beams Low/High • Flash-To-Pass (Optical Horn) • Front and Rear Wipers — Washer Functions Turn Signals Turn Signals Move the multifunction lever up or down and the arrows…

• Page 167: High/Low Beam Switch

  166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist Flash-To-Pass Tap the lever up or down once, without moving beyond You can signal another vehicle with your headlights by the detent, and the turn signal (right or left) will flash lightly pulling the multifunction lever toward you.

• Page 168: Windshield Wipers And Washers

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 2. Rotate the headlight switch counterclockwise to the NOTE: Broken, muddy or obstructed headlights and AUTO (A) position. taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). 3.

• Page 169
  168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Always remove any buildup of snow that pre- 1. Mist, Front Wiper and Washer vents the windshield wiper blades from returning to the Press the end of the multifunction lever inward to the off position.
• Page 170
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 2. Intermittent, Low and High Speed Wipers 3. Rear Wiper and Washer Use the intermittent wipers when weather conditions Rotating the rotary ring to the first detent activates the make a single wiping cycle, with a variable pause be- rear intermittent wipers.

• Page 171: Rain Sensing Wipers — If Equipped

  170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rain Sensing Wipers — If Equipped NOTE: • The Rain Sensing feature will not operate when the This feature senses moisture on the windshield and automatically activates the wipers for the driver. This wiper speed is in the low or high position.

• Page 172: Tilt Steering Column

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 • Remote Start Mode Inhibit — On vehicles equipped The Rain Sensing system has protective features for the wiper blades and arms. It will not operate under the with Remote Starting system, Rain Sensing wipers are following conditions: not operational when the vehicle is in the remote start mode.

• Page 173: Adjustable Pedals — If Equipped

  172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To tilt the column, push the lever downward to the WARNING! unlocked position. Move the steering column up or down, as desired. Pull the lever upward to the locked Do not adjust the steering column while driving. position to lock the steering column firmly in place.

• Page 174
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control Sys- tem is on. The following messages will be displayed on vehicles equipped with the Electronic Vehicle In- formation System (EVIC) if the pedals are attempted to be adjusted when the system is locked out (“Adjust- able Pedal Disabled —…

• Page 175: Electronic Speed Control — If Equipped

  174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h).

• Page 176: To Activate

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 System can be reactivated by pushing the Electronic WARNING! Speed Control ON/OFF button and resetting the desired vehicle set speed. Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidently To Activate set the system or cause it to go faster than you want.

• Page 177: Deactivating Electronic Speed Control

  176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Deactivating Electronic Speed Control RESUME ACCEL position, the set speed will continue to A soft tap on the brake pedal or pulling the Electronic increase until the lever is released, then the new set speed Speed Control lever (CANCEL) toward you will deacti- will be established.

• Page 178: Accelerating To Pass

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Accelerating To Pass WARNING! Press the accelerator as you normally would. When the pedal is released, the vehicle will return to the set speed. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your ve- NOTE: The Electronic Speed Control system maintains hicle could go too fast for the conditions, and you speed up and down hills.

• Page 179: Parksense Sensors

  178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense will remember the last system state (enabled The sensors can detect obstacles from approximately or disabled) from the last ignition cycle when the ignition 12 in (30 cm) up to 79 in (200 cm) from the rear is changed to the RUN/ON position.

• Page 180: Parksense Display

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 The ParkSense Warning Display is located in the Instru- ParkSense Display ment cluster’s EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status.

• Page 181
  180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will indicate a detected obstacle by showing three solid arcs and will produce a ⁄ second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
• Page 182
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning display operation when the system is detecting an obstacle:…

• Page 183: Enabling/Disabling Parksense

  182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY MESSAGE OBSTACLE DISTANCE FROM: ARC’s AUDIBLE SIGNAL REAR CORNERS REAR CENTER Park Assist ON None None Warning Object Detected 78.7 in (200 cm) 3 Solid Yes, 1/2 second Warning Object Detected 39.3 in (100 cm) 3 Flashing Slow Tone…

• Page 184: Service Parksense

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 refer to “Electronic Vehicle Information Center (EVIC)” in If “SERVICE PARK ASSIST SYSTEM” appears in the “Understanding Your Instrument Panel” for further in- Electronic Vehicle Information Center (EVIC) after mak- formation. When the shift lever is moved to REVERSE ing sure the rear fascia/bumper is free from snow, ice, and the system is disabled, the EVIC will display the mud, dirt and debris, see your authorized dealer.

• Page 185
  184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you turn ParkSense off, the instrument cluster • Clean the ParkSense sensors regularly, taking care will display “PARK ASSIST DISABLED.” Further- not to scratch or damage them. The sensors must not more, once you turn ParkSense off, it remains off be covered with ice, snow, slush, mud, dirt, or debris.
• Page 186
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 CAUTION! WARNING! • ParkSense is only a parking aid and it is unable • Drivers must be careful when backing up even to recognize every obstacle, including small ob- when using the ParkSense Rear Park Assist sys- stacles.

• Page 187: Parkview Rear Back Up Camera — If Equipped

  186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW REAR BACK UP CAMERA — IF WARNING! (Continued) EQUIPPED • Before using the ParkSense Rear Park Assist Your vehicle may be equipped with the ParkView Rear system, it is strongly recommended that the ball Back Up Camera that allows you to see an on-screen mount and hitch ball assembly is disconnected image of the rear of your vehicle whenever the shift lever…

• Page 188
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 WARNING! CAUTION! (Continued) • To avoid vehicle damage, the vehicle must be Drivers must be careful when backing up even when driven slowly when using ParkView to be able to using the ParkView Rear Back Up Camera. Always stop in time when an obstacle is seen.

• Page 189: Turning Parkview On Or Off — With Navigation/Multimedia Radio

  188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning ParkView On or Off — With Turning ParkView On or Off — Without Navigation/Multimedia Radio Navigation/Multimedia Radio 1. Press the “menu” hard key. 1. Press the “menu” hard key. 2. Select system setup soft key. 2.

• Page 190: Overhead Consoles

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 OVERHEAD CONSOLES Front Overhead Console Two versions of the overhead console are available. The base front overhead console model featured fixed incan- descent courtesy/reading lights, flip-down sunglass stor- age and conversation mirror. The premium front over- head console model features a LED focused light that illuminates the instrument panel cupholders, Infrared Automatic Temperature Control Sensor (ATC equipped…

• Page 191
  190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE when a front door, a sliding door or the liftgate is opened. From the closed position, press the door over-travel latch If your vehicle is equipped with Remote Keyless Entry to open the compartment. The door will slowly rotate to (RKE) the lights will also turn on when the UNLOCK the full open position.
• Page 192
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.

• Page 193: Garage Door Opener — If Equipped

  192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Console Halo Lighting The rear overhead console has recessed halo lighting around the perimeter of the console base. This feature provides additional lighting options while traveling and is controlled by the headlight switch. Refer to “Lights/ Halo Lights —…

• Page 194: Programming Homelink

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close If you have not trained any of the HomeLink buttons, while you are training the universal transceiver. erase all channels before you begin training.

• Page 195
  194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After training a HomeLink channel, if the garage Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink button you wish to program while door does not operate with HomeLink and the ga- keeping the indicator light in view.
• Page 196
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 This can usually be found where the hanging antenna 6. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor. It is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.

• Page 197: Gate Operator/Canadian Programming

  196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLink Gate Operator/Canadian Programming To operate, press and release the programmed Canadian radio frequency laws require transmitter sig- HomeLink button. Activation will now occur for the nals to time-out (or quit) after several seconds of trans- trained device (i.e., garage door opener, gate operator, mission –…

• Page 198: Security

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 successfully accepted the frequency signal. The indica- Troubleshooting Tips tor light will flash slowly and then rapidly when fully If you are having trouble programming HomeLink , here trained. are some of the most common solutions: •…

• Page 199: Power Sunroof — If Equipped

  198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. This device must accept any interference that may be Power Sunroof Operation received including interference that may cause undesired Opening the Sunroof Manually operation. Press the switch rearward and hold, and the sunroof will NOTE: open automatically from any position.

• Page 200
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Closing the Sunroof Manually WARNING! To close the sunroof from an open or vent position, press and hold the switch forward. The sunroof will close fully Never leave children in a vehicle with the key in the and stop automatically.
• Page 201
  200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Express Close Auto-Express with Anti-Pinch Protection Press the switch forward and release, and the sunroof During express closing, anytime an obstacle that restricts will close automatically from any position. The sunroof glass movement is detected, the motor will stop and will close fully, then stop automatically.

• Page 202: Electrical Power Outlets — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 • Do not exceed the maximum power of 160 Watts (13 with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window. Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will Sunroof Maintenance need to be replaced.

• Page 203
  202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE One outlet in the removable floor console shares a fuse WARNING! with the lower outlet in the instrument panel and is also connected to the battery. Do not exceed a maximum To avoid serious injury or death: •…

• Page 204: Power Inverter — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 CAUTION! CAUTION! (Continued) • Power outlets are designed for accessory plugs • Many accessories that can be plugged in draw only. Do not hang any type of accessory or acces- power from the vehicle’s battery, even when not in sory bracket from the plug.

• Page 205
  204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power inverter is designed with built-in overload protection. If the power rating of 150 Watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset.

• Page 206: Cupholders

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 To turn on the power outlet, press the switch once. Press CUPHOLDERS the switch a second time to turn the power outlet off. There are nine cupholders in the interior. Two cupholders in the center front instrument panel, four in the floor consoles and three more are located in the third row quarter trim panel.

• Page 207: Instrument Panel Cupholders

  206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Instrument Panel Cupholders variety of container types and sizes. Press down on the The instrument panel cupholders are located in a pull-out container to engage the cupholder retention features. drawer just above the lower storage bin. Interior Bottle Holders There are four bottle holders located in the interior.

• Page 208: Smoker’s Package Kit — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 of the two cupholders in the center front instrument panel. To install the ash receiver, align the receiver so the thumb grip on the lid is facing rearward. Press the ash receiver into either of the cup wells to secure. Pull upward on the ash receiver to remove for cleaning and/or storage.

• Page 209
  208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To close the compartment door, push firmly downward Lower Glove Compartment on the door’s surface to release the detent and latch the To open the lower compartment, pull out on the release door closed. handle (3).

• Page 210: Door Trim Panel Storage

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Door Trim Panel Storage WARNING! Front Door Storage If containers of hot liquid are placed in the bottle Both interior front door panels have multiple pockets for holder, they can spill when the door is closed, burn- storage.

• Page 211: Driver Seatback Storage — If Equipped

  210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver Seatback Storage — If Equipped Umbrella Holder The drivers seatback has a primary storage pocket on all An umbrella holder has been conveniently molded into models and an optional secondary mesh pocket. the left front door entry scuff molding.

• Page 212: Second Row Floor Storage Bins

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Second Row Floor Storage Bins CAUTION! The area below the floor covers, located in front of the second row seats, is available for storage. The storage bin cover must lay flat and be locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.

• Page 213: Storage Bin Safety Warning

  212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Storage Bin Safety Warning WARNING! (Continued) Carefully follow these warnings to help prevent personal • Do not operate the storage bin covers while the injury or damage to your vehicle: vehicle is in motion. •…

• Page 214: Center And Rear Overhead Console Storage — If Equipped

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 Seat Storage Bin Cover Emergency Release Lever NOTE: In the event of an individual being locked inside As a security measure, your vehicle may be built with a the storage bin, the storage bin cover can be opened from Storage Bin Cover Emergency Release is built into the inside of the bin by pushing on the glow-in-the-dark storage bin cover latching mechanism.

• Page 215: Coat Hooks

  214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Coat Hooks Coat hooks are located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle.

• Page 216: Console Features

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Basic Console Basic Console features consist of the following: • The basic console profile allows vehicle occupants to easily pass through the first row to the second. • Four cupholders accept up to extra large size beverage cups or 20 oz (.6 L) plastic bottles.

• Page 217: Premium Console — If Equipped

  216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Remove the console. WARNING! To Reinstall The Basic Floor Console In an accident, serious injury could result if the 1. Position the console at a slight angle (front slightly removable floor console is not properly installed. higher than the rear).

• Page 218
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 • Large console center storage will store headphones for the available rear DVD entertainment system or other items • 12 Volt DC power outlet provides continuous power inside the console for cell phones or other electronics. •…
• Page 219
  218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE holder insert for both cavities can easily be removed for Position 2 shows the raised storage tray revealing a large cleaning. The cupholders will also accommodate large storage area below. size cups and 20 oz (.6 L) bottles. Position 1 shows the console closed with four cupholders and a convenient storage tray.
• Page 220
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 easy access to the storage area below and provides two of the four cupholders for the second row passengers. Console Position 4 To Remove The Premium Floor Console Console Position 3 1. Pull up on the bottom release handle in the front of the Position 4 shows the complete console in its rearmost console.

• Page 221: Rear Window Features

  220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull rearward to disengage from floor and remove WARNING! console. In an accident, serious injury could result if the To reinstall the console: removable floor console is not properly installed. 1. Position the console at a slight angle (rear slightly Always be sure the removable floor console is fully higher than the front).

• Page 222: Load-Leveling System

  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 NOTE: CAUTION! (Continued) • You can turn off the heated mirror feature at anytime • Do not use scrapers, sharp instruments, or abra- by pressing the rear window defroster switch a second sive window cleaners on the interior surface of the time.

• Page 223: Roof Luggage Rack — If Equipped

  222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and side rails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars.

• Page 224
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 NOTE: To help control wind noise when installing the CAUTION! (Continued) crossbars ensure the embossed arrow is facing the front • To avoid damage to the roof rack and vehicle, do of the vehicle. When the crossbars are not in use, the front not exceed the maximum roof rack load capacity of crossbar should be fastened just forward of the middle 150 lbs (68 kg).

• Page 225: Sun Screens — If Equipped

  224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SUN SCREENS — IF EQUIPPED WARNING! Sun screens are available for second and third row seating windows. The screens store in the sill trim panels, Cargo must be securely tied before driving your and the tops of the windows are equipped with hooks vehicle.

• Page 226
  UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window. Sun Screen Extended To lower the sun screen, gently lift the tab upward to disengage the hooks, and feed the screen back into the base sill.
• Page 228
  UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ….231 Electronic Vehicle Information Center (EVIC) Displays ……252 Instrument Cluster .
• Page 229
  228 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Voice Command Media Center 130 (RES/RSC) — AM/FM System (VR) — If Equipped … . . 263 Stereo Radio With CD Player (MP3 AUX Jack) And Sirius Radio .
• Page 230
  UNDERSTANDING YOUR INSTRUMENT PANEL 229 Play Mode ……290 Operating Instructions — Uconnect™ Phone (If Equipped) ….. . . 298 List Or Browse Mode .
• Page 231
  230 UNDERSTANDING YOUR INSTRUMENT PANEL Three-Zone Temperature Control — Winter Operation ….321 If Equipped ……307 Vacation/Storage .

• Page 232: Instrument Panel Features

  UNDERSTANDING YOUR INSTRUMENT PANEL 231 INSTRUMENT PANEL FEATURES 1 — Air Vents 5 — Analog Clock 9 — DVD – If Equipped 13 — Switch Bank 2 — Instrument Cluster 6 — Upper Glove Compartment 10 — Cup Holders 14 — Ignition Switch 7 —…

• Page 233: Instrument Cluster

  232 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER…

• Page 234: Instrument Cluster Descriptions

  UNDERSTANDING YOUR INSTRUMENT PANEL 233 INSTRUMENT CLUSTER DESCRIPTIONS vehicle has completely stopped and the shift lever is placed in the PARK position, the light should turn off. 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when If the light remains lit with the engine running, your the ignition switch is in the ON position.

• Page 235
  234 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle is experiencing a problem with the charging (TPMS) that illuminates a low tire pressure telltale when system. Obtain SERVICE IMMEDIATELY. See an autho- one or more of your tires is significantly under-inflated. rized dealer. Accordingly, when the low tire pressure telltale illumi- nates, you should stop and check your tires as soon as If jump starting is required, refer to “Jump Starting…
• Page 236
  UNDERSTANDING YOUR INSTRUMENT PANEL 235 system detects a malfunction, the telltale will flash for CAUTION! approximately one minute and then remain continuously illuminated. This sequence will continue upon subse- The TPMS has been optimized for the original quent vehicle start-ups as long as the malfunction exists. equipment tires and wheels.
• Page 237
  236 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Oil Pressure Warning Light If the light turns on while driving, safely pull over and This light indicates low engine oil pressure. The stop the vehicle. If the A/C system is on, turn it off. Also, light should turn on momentarily when the engine shift the transmission into NEUTRAL and idle the ve- is started.
• Page 238
  UNDERSTANDING YOUR INSTRUMENT PANEL 237 10. Electronic Stability Program (ESP) Indicator Light WARNING! / Brake Assist System (BAS) Warning Light The malfunction light for the Electronic Stabil- If a warning light remains on the system may not be ity Program (ESP) is combined with Brake working and you will not have the benefit of ESP or Assist System (BAS).
• Page 239
  238 UNDERSTANDING YOUR INSTRUMENT PANEL If the light remains on when the parking brake has been NOTE: The light may flash momentarily during sharp disengaged, and the fluid level is at the full mark on the cornering maneuvers, which change fluid level condi- master cylinder reservoir, it indicates a possible brake tions.
• Page 240
  UNDERSTANDING YOUR INSTRUMENT PANEL 239 Operation of the Brake Warning Light can be checked by 13. Anti-Lock Brake (ABS) Light turning the ignition switch from the OFF position to the This light monitors the Anti-Lock Brake System ON position. The light should illuminate for approxi- (ABS).
• Page 241
  240 UNDERSTANDING YOUR INSTRUMENT PANEL 14. Electronic Stability Program (ESP) Indicator Light 17. Front Fog Light Indicator — If Equipped / Traction Control System (TCS) Indicator Light This indicator will illuminate when the front fog If this indicator light flashes during accelera- lights are on.
• Page 242
  UNDERSTANDING YOUR INSTRUMENT PANEL 241 the ON position, before engine start. If the bulb does not WARNING! come on when turning the key from OFF to ON, have the condition checked promptly. A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal Certain conditions such as a loose or missing gas cap, operating conditions.
• Page 243
  242 UNDERSTANDING YOUR INSTRUMENT PANEL 21. Temperature Gauge WARNING! The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that A hot engine cooling system is dangerous. You or the engine cooling system is operating satisfactorily. others could be badly burned by steam or boiling coolant.
• Page 244
  UNDERSTANDING YOUR INSTRUMENT PANEL 243 NOTE: On the Base cluster, the reset button toggles door ……Door Ajar between odometer, Trip A, Trip B, ECO and outside gATE .
• Page 245
  244 UNDERSTANDING YOUR INSTRUMENT PANEL ECO / ECO-on (Fuel Saver Indicator) — If Equipped TRIP ODOMETER button to turn off the message. If the The ECO-on indicator will illuminate when you are problem continues, the message will appear the next time driving in a fuel efficient manner and can be used to the vehicle is started.
• Page 246
  UNDERSTANDING YOUR INSTRUMENT PANEL 245 means the engine oil change interval may fluctuate 25. Odometer dependent upon your personal driving style. The odometer shows the total distance the vehicle has been driven. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN U.S.
• Page 247
  246 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Compass Mini-Trip Computer (CMTC) or Electronic 27. Compass Mini-Trip Computer (CMTC) Display Vehicle Information Center (EVIC) Display — If Button Press the left reset button to scroll through sub-menus Equipped (i.e., Outside Temperature, Trip Functions: AVG Fuel Compass Mini-Trip Computer (CMTC) Display —…

• Page 248: Compass Mini-Trip Computer (Cmtc) — If Equipped

  • If the vehicle is equipped with a Chrysler ™ gps CMTC Reset Buttons (Navigation Radio), the NAV system will provide the…

• Page 249
  248 UNDERSTANDING YOUR INSTRUMENT PANEL When the appropriate conditions exist, the following cluster to switch from odometer, to Trip A or Trip B, or to messages will display: ECO. Press and hold the right button while the odometer/trip odometer is displayed to reset. NE .

• Page 250: Compass/Temperature Display

  UNDERSTANDING YOUR INSTRUMENT PANEL 249 Compass/Temperature Display and such devices may interfere and cause false com- pass readings. Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To ensure compass accu- racy, the compass variance should be properly set accord- ing to the variance map for the zone where the vehicle will be driven.

• Page 251: Electronic Vehicle Information Center (Evic) — If Equipped

  250 UNDERSTANDING YOUR INSTRUMENT PANEL To Set the Variance 2. Press and hold the CMTC reset button (for approxi- Start the engine and leave the transmission gear selector mately 10 seconds) until the current variance zone num- lever in the PARK position. Press and hold the CMTC ber is displayed.

• Page 252
  UNDERSTANDING YOUR INSTRUMENT PANEL 251 • Vehicle information warning message displays • Tire Pressure Monitor System • Personal Settings (Customer-Programmable Features) • Compass display • Outside temperature display • Trip computer functions • Audio Modes display EVIC Menu / Step Control Button, as it appears on the left side of the steer- Electronic Vehicle Information Center (EVIC) ing wheel spoke.

• Page 253: Electronic Vehicle Information Center (Evic) Displays

  252 UNDERSTANDING YOUR INSTRUMENT PANEL Press and release the MENU button, and the Press this button to RESET Trip Functions and mode displayed will change between change Personal Settings. Compass/Temperature, Trip, System Status, and Personal Settings. Electronic Vehicle Information Center (EVIC) Press the STEP button to scroll through sub Displays menus (i.e., Trip Functions, Avg.

• Page 254
  UNDERSTANDING YOUR INSTRUMENT PANEL 253 • LOW WASHER FLUID • Blind Spot System Not Available — This message is displayed to indicate the Blind Spot Monitor (BSM) • Oil Change Required system is temporarily unavailable due to sensor block- • Check Gascap age, electronic interference, or other temporary con- ditions.

• Page 255: Trip Functions

  254 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Required 2. Fully depress the accelerator pedal, slowly, three times Your vehicle is equipped with an engine oil change within 10 seconds. indicator system. The Oil Change Required message will 3. Turn the ignition switch to the OFF/LOCK position. flash in the EVIC display for approximately 10 seconds, after a single chime has sounded, to indicate the next NOTE: If the indicator message illuminates when you…

• Page 256
  UNDERSTANDING YOUR INSTRUMENT PANEL 255 “RESET” or show dashes for two seconds. Then, the significant amount of fuel to the vehicle will turn off the history information will be erased, and the averaging will LOW FUEL text and a new DTE value will display. continue from the last fuel average reading before the Elapsed Time reset.

• Page 257: Compass Display / Eco (Fuel Saver Mode) — If Equipped

  256 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display / ECO (Fuel Saver Mode) — If This feature allows you to monitor when you are driving Equipped in a fuel efficient manner, and it can be used to modify The compass readings indicate the direction driving habits in order to increase fuel economy.

• Page 258
  UNDERSTANDING YOUR INSTRUMENT PANEL 257 2. Press the MENU button until Personal Settings NOTE: Keep magnetic materials away from the top of (Customer-Programmable Features) menu is reached. the instrument panel, such as iPod’s, Cell Phones, Lap- tops and Radar Detectors. This is where the compass 3.

• Page 259: Personal Settings (Customer-Programmable Features)

  258 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Press and hold the compass button for approximately Use the Step button to display one of the following two seconds. choices. 3. Press the STEP button until “Compass Variance” mes- Language sage, and the last variance zone number, displays in the When in this display you may select one of five lan- EVIC.

• Page 260
  UNDERSTANDING YOUR INSTRUMENT PANEL 259 Auto UNLK On Exit RKE Linked To Memory When ON is selected, all doors will unlock when the When this feature is selected the memory seat, mirror, vehicle is stopped and the transmission is in the PARK or and radio settings will return to the memory set position NEUTRAL position and the driver’s door is opened.
• Page 261
  260 UNDERSTANDING YOUR INSTRUMENT PANEL Headlamp Off Delay Tilt MIRR. In Reverse When this feature is selected, the driver can choose to When this feature is selected and the vehicle is placed in have the headlights remain on for 0, 30, 60, or 90 seconds a reverse gear, the driver’s side mirror will tilt downward when exiting the vehicle.
• Page 262
  UNDERSTANDING YOUR INSTRUMENT PANEL 261 unlocked with the RKE transmitter. To make your selec- NOTE: If your vehicle has experienced any damage in tion, press and release the RESET button until “OFF,” the area where the sensor is located, even if the fascia is “30 sec.,”…
• Page 263
  262 UNDERSTANDING YOUR INSTRUMENT PANEL Display Units of Measure In Turn Headlights On with Remote Key Unlock The EVIC, odometer, and navigation system (if When this feature is selected, the headlights will activate, equipped) can be changed between English and Metric and remain on for up to 90 seconds, when the doors are units of measure.

• Page 264: Media Center 730N/430 (Rer/Rbz) — Am/Fm Stereo Radio And Cd/Dvd/Hdd/Nav — If Equipped

  UNDERSTANDING YOUR INSTRUMENT PANEL 263 Rain Sensing Intermittent Wipers — If Equipped The RER radio also contains a Global Positioning System When ON is selected, the system will automatically (GPS)-based Navigation system. activate the windshield wipers if it senses moisture on Refer to your Uconnect™…

• Page 265
  264 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed, the clock Changing Daylight Savings Time setting menu will appear on the screen. When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the 3.

• Page 266: Clock Setting Procedure — Rer Radio

  UNDERSTANDING YOUR INSTRUMENT PANEL 265 2. Touch the screen where the time is displayed. The want to select, touch the screen where the word “Page” is clock setting menu will appear on the screen. displayed to view additional time zones in the menu. 3.

• Page 267
  266 UNDERSTANDING YOUR INSTRUMENT PANEL 4. To move the hour forward, touch the screen where the 2. Touch the screen where “User Clock” is displayed, the word “Hour” with the arrow pointing upward is dis- clock setting menu will appear on the screen. played.

• Page 268: Media Center 130 (Res) — Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)

  UNDERSTANDING YOUR INSTRUMENT PANEL 267 Touch the screen where the words “Show Time if Radio is MEDIA CENTER 130 (RES) — AM/FM STEREO Off” are displayed to change the current setting. RADIO WITH CD PLAYER (MP3 AUX JACK) Changing the Time Zone NOTE: The radio sales code is located on the lower right side of the radio faceplate.

• Page 269: Operating Instructions — Radio Mode

  268 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio.

• Page 270
  UNDERSTANDING YOUR INSTRUMENT PANEL 269 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL knob to save time change. control knob to the right or left to increase or decrease the mid-range tones.
• Page 271
  270 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to You may add a second station to each pushbutton by exit setting tone, balance, and fade. repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the AM/FM Button display window.

• Page 272: Operation Instructions — Cd Mode For Cd And Mp3 Audio Play

  UNDERSTANDING YOUR INSTRUMENT PANEL 271 Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •…

• Page 273
  272 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button — Ejecting a CD the current selection. Pressing and holding the SEEK Press the EJECT button to eject the CD. button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within…

• Page 274: Notes On Playing Mp3 Files

  UNDERSTANDING YOUR INSTRUMENT PANEL 273 SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate The medium formats supported by the radio are ISO 9660 Random Play. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.

• Page 275
  274 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of characters in file/folder names: Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- • Level 1: 12 (including a separator . and a three- sion as MP3 files. Non-MP3 files named with the *.MP3 character extension) extension may cause playback problems.
• Page 276
  UNDERSTANDING YOUR INSTRUMENT PANEL 275 Playback of MP3 Files MPEG Sampling Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification Frequency (kHz) radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128, 48, 44.1, 32…

• Page 277: Operation Instructions — Auxiliary Mode

  276 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — Auxiliary Mode MEDIA CENTER 130 (RES/RSC) — AM/FM The auxiliary (AUX) jack is an audio input jack, which STEREO RADIO WITH CD PLAYER (MP3 AUX allows the user to plug in a portable device, such as an JACK) AND SIRIUS RADIO MP3 player, or cassette player, and utilize the vehicle’s NOTE: The radio sales code is located on the lower right…

• Page 278: Operating Instructions — Radio Mode

  UNDERSTANDING YOUR INSTRUMENT PANEL 277 Operating Instructions — Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON/RUN or another selection.

• Page 279
  278 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect™ Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped).
• Page 280
  UNDERSTANDING YOUR INSTRUMENT PANEL 279 INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
• Page 281
  280 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to 16-Digit Character Program Type exit setting tone, balance, and fade. Display Classic Rock Cls Rock MUSIC TYPE Button College College Pressing this button once will turn on the Music Type mode for five seconds.
• Page 282
  UNDERSTANDING YOUR INSTRUMENT PANEL 281 SETUP Button 16-Digit Character Program Type Pressing the SETUP button allows you to select between Display the following items: Soft Soft • Set Clock — Pressing the SELECT button will allow Soft Rock Soft Rck you to set the clock.

• Page 283: Operation Instructions — Cd Mode For Cd And Mp3 Audio Play

  282 UNDERSTANDING YOUR INSTRUMENT PANEL window. Select the button (1–6) you wish to lock onto this Buttons 1 — 6 station and press and release that button. If a button is These buttons tune the radio to the stations that you not selected within five seconds after pressing the SET/ commit to pushbutton memory (12 AM and 12 FM RND button, the station will continue to play but will not…

• Page 284
  UNDERSTANDING YOUR INSTRUMENT PANEL 283 Inserting Compact Disc(s) CAUTION! (Continued) Gently insert one CD into the CD player with the CD • Do not use adhesive labels. These labels can peel label facing up. The CD will automatically be pulled into away and jam the player mechanism.

• Page 285: Notes On Playing Mp3 Files

  284 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button convertible or soft-top models (if equipped). Press the button to select either AM or FM mode. SEEK Button SET/RND Button (Random Play Button) Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate CD.

• Page 286
  UNDERSTANDING YOUR INSTRUMENT PANEL 285 Supported Media (Disc Types) a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this display.) Supported Medium Formats (File Systems)
• Page 287
  286 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats MPEG Sampling Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification Frequency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 320, 256, 224, extension may cause playback problems.

• Page 288: List Button (Cd Mode For Mp3 Play)

  UNDERSTANDING YOUR INSTRUMENT PANEL 287 Playback of MP3 Files LIST Button (CD Mode for MP3 Play) When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.

• Page 289
  288 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds TIME Button (Auxiliary Mode) to return to elapsed time display. Press this button to change the display to time of day. The time of day will display for five seconds (when the Operation Instructions — Auxiliary Mode ignition is OFF).

• Page 290: Universal Consumer Interface (Uci) 0.5 — If Equipped

  UNDERSTANDING YOUR INSTRUMENT PANEL 289 UNIVERSAL CONSUMER INTERFACE (UCI) 0.5 — NOTE: • If the radio has a USB port, connecting an iPod to this IF EQUIPPED port does not play the media. For playing an iPod , NOTE: This section is for sales code RES and REQ/ use the separate 16–pin connector port (in the glove REL/RET radios only with Uconnect™.

• Page 291: Using This Feature

  290 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Controlling The iPod Using Radio Buttons • It may be necessary to remove the connector pin To get into the UCI (iPod ) mode and access a connected protection cap from the 16–pin connector port, prior to iPod , press the “AUX”…

• Page 292
  UNDERSTANDING YOUR INSTRUMENT PANEL 291 jump to the previous track in the list. Turning this beginning of the track. Pressing the SEEK >> button button at any other time in the track, will jump to during play mode, it will jump to the next track in the the beginning of the current track.

• Page 293: List Or Browse Mode

  292 UNDERSTANDING YOUR INSTRUMENT PANEL • RND button (available on sales code RES radio only): fast will scroll through the list faster. During fast Pressing this button toggles between Shuffle ON and scroll, a slight delay in updating the information on Shuffle OFF modes for the iPod .

• Page 294
  UNDERSTANDING YOUR INSTRUMENT PANEL 293 • Pressing a PRESET button will display the current CAUTION! list on the top line and the first item in that list on • Leaving the iPod (or any supported device) any- the second line. where in the vehicle in extreme heat or cold can •…

• Page 295: Uconnect™ Multimedia (Satellite Radio) — If Equipped

  294 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect™ Multimedia (SATELLITE RADIO) — IF information, call the toll-free number 888-539-7474, or EQUIPPED (REN/RER/RBZ/RES RADIOS ONLY) visit the Sirius web site at www.sirius.com, or at www- Satellite radio uses direct satellite-to-receiver broadcast- .siriuscanada.ca for Canadian residents. ing technology to provide clear digital sound, coast to Electronic Serial Number/Sirius Identification coast.

• Page 296: Selecting Uconnect™ Multimedia (Satellite) Mode

  UNDERSTANDING YOUR INSTRUMENT PANEL 295 Sirius ID number will display. The Sirius ID number bikes should be placed as far rearward as possible, within display will time out in two minutes. Press any button on the loading design of the rack. Do not place items directly the radio to exit this screen.

• Page 297: Operating Instructions — Uconnect

  296 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Uconnect™ Multimedia INFO Button (Satellite) Mode Pressing the INFO button will cycle the display informa- tion between Artist, Song Title, and Composer (if avail- NOTE: The ignition switch must be in the ON or ACC able).

• Page 298
  UNDERSTANDING YOUR INSTRUMENT PANEL 297 • Display Sirius ID number — Press the AUDIO/ MUSIC TYPE Button Pressing this button once will turn on the Music Type SELECT button to display the Sirius ID number. This mode for five seconds. Pressing the MUSIC TYPE button number is used to activate, deactivate, or change the or turning the TUNE/SCROLL control knob within five Sirius subscription.

• Page 299: Operating Instructions — Uconnect™ Phone (If Equipped)

  298 UNDERSTANDING YOUR INSTRUMENT PANEL pushbutton memory. The channels stored in SET 2 service provider is SIRIUS Satellite Radio. SIRIUS Back- memory can be selected by pressing the pushbutton seat TV™ offers three video channels for family enter- twice. tainment, directly from its satellites and broadcasting studios.

• Page 300
  UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Additional single-disc DVD player with two-screen The LCD screen(s) are located in the overhead compart- system ment console. • Battery-powered two-channel remote control • Two remote headphones • Integrated remote storage in either screen location •…

• Page 301: Remote Sound System Controls — If Equipped

  300 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED VES™ Remote Control Location NOTE: Refer to the “Uconnect™ Multimedia” section of Uconnect™ User Manual located on the DVD for further Remote Sound System Controls (Back View Of Steering details.

• Page 302: Radio Operation

  UNDERSTANDING YOUR INSTRUMENT PANEL 301 The right-hand rocker switch has a pushbutton in the The button located in the center of the left-hand switch center, and controls the volume and mode of the sound will tune to the next preset station that you have pro- system.

• Page 303: Cd/Dvd Disc Maintenance

  302 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE NOTE: If you experience difficulty in playing a particu- To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding.

• Page 304: Climate Controls

  UNDERSTANDING YOUR INSTRUMENT PANEL 303 CLIMATE CONTROLS The Climate Control System allows you to regulate the temperature, amount, and direction of air circulating throughout the vehicle. The controls are located on the instrument panel, below the radio. Manual Heating and Air Conditioning System — If Equipped The controls for the manual system in this vehicle contain a series of outer rotary dials and inner push knobs.

• Page 305: Understanding Your Instrument Panel

  304 UNDERSTANDING YOUR INSTRUMENT PANEL Front Blower Control Temperature Control There are four blower speeds. Use this Use this control to regulate the tem- control to regulate the amount of air perature of the air inside the passenger forced through the system in any compartment.

• Page 306
  UNDERSTANDING YOUR INSTRUMENT PANEL 305 Mode Control (Air Direction) Bi-Level Mode Mode control allows you to choose Air is directed through the panel and floor outlets. from several selections of air distribu- tion. You can select either a primary NOTE: There is a difference in temperature (in any mode, as identified by the symbols, or conditions other than full cold or full hot), between the a blend of two of these modes.
• Page 307
  306 UNDERSTANDING YOUR INSTRUMENT PANEL Defrost Mode NOTE: • If the RECIRCULATION button is pressed when the Air is directed through the windshield and side window demist outlets. Use DEFROST mode with system is in MIX, DEFROST, or FLOOR mode the maximum blower and temperature settings for best RECIRCULATION LED indicator will flash 3 times to windshield and side window defrosting.

• Page 308: Three-Zone Temperature Control — If Equipped

  UNDERSTANDING YOUR INSTRUMENT PANEL 307 Economy Mode NOTE: The air conditioning compressor will not engage If ECONOMY mode is desired, press the A/C button to until the engine has been running for about 10 seconds. turn off the indicator light and the A/C compressor. Max A/C Rotate the temperature control knob to the desired For maximum cooling use the A/C and RECIRCULA-…

• Page 309
  308 UNDERSTANDING YOUR INSTRUMENT PANEL The Three-Zone Temperature Control bottom panel con- trols rear Heating, Ventilation, and Air Conditioning operations. Front Upper Three Zone Temperature Control 1 – Left Temperature 7 – Right Temperature 2 – PANEL 8 – Rear DEFROST 3 –…

• Page 310: Rear Manual Climate Control — If Equipped

  UNDERSTANDING YOUR INSTRUMENT PANEL 309 The primary control for the rear blower is on the front NOTE: For vehicles equipped with Remote Start, the climate control unit located on the instrument panel. climate controls will not function during Remote Start When the front control is in any position other than rear, operation if the blower control is left in the “O”…

• Page 311
  310 UNDERSTANDING YOUR INSTRUMENT PANEL The rear blower and temperature controls for the rear Rear Blower Control seat passengers are located in the headliner, near the The primary control for the rear blower is on the front center of the vehicle. climate control unit, located on the instrument panel.
• Page 312
  UNDERSTANDING YOUR INSTRUMENT PANEL 311 When rear controls are locked by the front system, the CAUTION! lock symbol on the temperature knob is illuminated, and the rear overhead adjustments are inoperable. Interior air enters the Rear Manual Climate Control system through an intake grille, located in the right Rear Mode Control side trim panel behind the third row seats.

• Page 313: Automatic Temperature Control (Atc) — If Equipped

  312 UNDERSTANDING YOUR INSTRUMENT PANEL • The system can be controlled manually, if desired. Floor Mode Air comes from the floor outlets. • SYNC feature links the controls for all three zones, allowing one comfort setting (driver setting) for the Automatic Temperature Control (ATC) —…

• Page 314
  UNDERSTANDING YOUR INSTRUMENT PANEL 313 Front Upper ATC Panel Front Lower ATC Panel 1 — System On/Off 9 — Air Conditioning (A/C) On/ 1 — Rear Blower Speed 4 — Rear ATC Lock 2 — Rear Temperature / Rear 5 — Rear DEFROST 2 — Blower Indicator 10 — AUTO Mode / Blower System On/Off…
• Page 315
  314 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Operation NOTE: • It is not necessary to move the temperature settings for 1. Press the AUTO button on the Front Upper ATC Panel cold or hot vehicles. The system automatically adjusts and the word AUTO will illuminate in the front ATC the temperature, mode and fan speed to provide display, along with three temperatures for driver, front comfort as quickly as possible.
• Page 316
  UNDERSTANDING YOUR INSTRUMENT PANEL 315 Manual Operation Panel Mode This system offers a full complement of manual override Air is directed through the outlets in the instrument features. The AUTO symbol in the front ATC display will panel. These outlets can be adjusted for direction, be turned off when the system is being used in the and turned on or off to control airflow.
• Page 317
  316 UNDERSTANDING YOUR INSTRUMENT PANEL Floor Mode The SNOWFLAKE mode, or A/C button, allows Air comes from the floor outlets. A slight amount of the operator to manually activate or deactivate the air is directed through the defrost and side window air conditioning system.
• Page 318
  UNDERSTANDING YOUR INSTRUMENT PANEL 317 Recirculation Control Rear Automatic Temperature Control (ATC) — If When outside air contains smoke, odors, or Equipped high humidity, or if rapid cooling is desired, The Rear ATC System has floor air outlets at the rear of you may wish to recirculate interior air by the right side sliding door, and overhead outlets at each pressing the RECIRCULATION mode control…
• Page 319
  318 UNDERSTANDING YOUR INSTRUMENT PANEL The Rear ATC System is located in the headliner, near the 1. Press the REAR LOCK button on the front lower ATC center of the vehicle. panel. This turns off the REAR LOCK icon in the rear temperature knob.
• Page 320
  UNDERSTANDING YOUR INSTRUMENT PANEL 319 NOTE: CAUTION! • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts Interior air enters the Rear Automatic Temperature the temperature, mode and fan speed to provide Control System through an intake grille, located in comfort as quickly as possible.

• Page 321: Summer Operation

  320 UNDERSTANDING YOUR INSTRUMENT PANEL When rear controls are locked by the front system, the NOTE: In many temperature positions, the BI-LEVEL LOCK symbol on the temperature knob is illuminated mode is designed to provide cooler air out of the head- and any rear overhead adjustments are ignored.

• Page 322: Winter Operation

  UNDERSTANDING YOUR INSTRUMENT PANEL 321 Winter Operation Window Fogging To ensure the best possible heater and defroster perfor- Vehicle windows tend to fog on the inside in mild, rainy mance, make sure the engine cooling system is function- and/or humid weather. To clear the windows, select ing properly and the proper amount, type, and concen- DEFROST or MIX mode and increase the front blower tration of coolant is used.

• Page 323: Operating Tips

  322 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips A/C Air Filter— If Equipped On vehicles equipped with Automatic Temperature Con- trol (ATC), the climate control system filters out dust and pollen from the air. Refer to “Air Conditioning” in “Maintaining Your Vehicle” for filter replacement instructions.

• Page 324: Starting And Operating

  STARTING AND OPERATING CONTENTS Starting Procedures ….327 Automatic Transmission ….330 Automatic Transmission .

• Page 325
  324 STARTING AND OPERATING Driving Through Water ….339 Tire Safety Information ….352 Flowing/Rising Water .
• Page 326
  STARTING AND OPERATING 325 Life Of Tire ……367 MMT In Gasoline ….381 Replacement Tires .
• Page 327
  326 STARTING AND OPERATING Maintenance ……387 Trailer Towing ……394 Adding Fuel .

• Page 328: Starting Procedures

  STARTING AND OPERATING 327 STARTING PROCEDURES Normal Starting Before starting your vehicle, adjust your seat, adjust the 1. Do not press the accelerator. inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat 2.

• Page 329: Extreme Cold Weather (Below 20°F Or -29°C)

  328 STARTING AND OPERATING Extreme Cold Weather (Below 20°F or –29°C) WARNING! (Continued) Follow the same instructions in the “Normal Starting” • Do not attempt to push or tow your vehicle to get procedure. it started. Vehicles equipped with an automatic To ensure reliable starting at these temperatures, use of transmission cannot be started this way.

• Page 330: After Starting

  STARTING AND OPERATING 329 After Starting CAUTION! The idle speed will automatically decrease as the engine warms up. To prevent damage to the starter, DO NOT crank the engine for more than 15–second intervals at one time. ENGINE BLOCK HEATER — IF EQUIPPED Wait 10 to 15 seconds before trying again.

• Page 331: Automatic Transmission

  330 STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! CAUTION! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle Damage to the transmission may occur if the follow- speed. If your foot is not firmly on the brake pedal, ing precautions are not observed: the vehicle could accelerate quickly forward or in •…

• Page 332: Brake/Transmission Interlock System

  STARTING AND OPERATING 331 Brake/Transmission Interlock System This system prevents the key fob from being removed This vehicle is equipped with a Brake Transmission Shift unless the shift lever is in PARK. It also prevents moving Interlock System (BTSI) that holds the shift lever in the the shift lever out of PARK, unless the key fob is in the PARK position when the ignition switch is in the LOCK ACC/ON position, and the brake pedal is pressed.

• Page 333: Gear Ranges

  332 STARTING AND OPERATING The electronically-controlled transmission provides a The transmission has only PRND shift positions. Down- precise shift schedule. The transmission electronics are shifts are carried out by an Electronic Range Select (ERS) self-calibrating; therefore, the first few shifts on a new by moving the lever—/ + while in the DRIVE position, vehicle may be somewhat abrupt.

• Page 334
  STARTING AND OPERATING 333 When parking on a hill, it is important to set the parking WARNING! (Continued) brake before placing the shift lever in PARK, otherwise • Unintended movement of a vehicle could injure the load on the transmission locking mechanism may those in and near the vehicle.
• Page 335
  334 STARTING AND OPERATING • When engaged in PARK, you will not be able to move WARNING! (Continued) the shift lever rearward without pressing the shift • Never leave children alone in a vehicle. Leaving lever button. unattended children in a vehicle is dangerous for a number of reasons.
• Page 336
  STARTING AND OPERATING 335 NEUTRAL occurs while using the DRIVE range, such as when This range is used when vehicle is standing for pro- operating the vehicle under heavy loading conditions, longed periods with engine running. Engine may be (i.e., in hilly terrain, traveling into strong head winds or started in this range.
• Page 337
  336 STARTING AND OPERATING Switching from ERS to DRIVE can be done at any vehicle CAUTION! speed. To shift from DRIVE mode to ERS mode, move the shift lever to the left (-) once. The current gear will be If the transmission operating temperature exceeds maintained as the top gear.
• Page 338
  STARTING AND OPERATING 337 damage, the transmission automatically shifts into sec- Odometer ond gear (third gear for six-speed). The transmission Screen Dis- play remains in second gear (third gear for six-speed) despite the forward gear selected. PARK, REVERSE, and NEU- Actual Gear(s) Allowed (Six- TRAL will continue to operate.

• Page 339: Driving On Slippery Surfaces

  338 STARTING AND OPERATING NOTE: Even if the transmission can be reset, it is WARNING! recommended that you visit an authorized dealer at your earliest possible convenience. Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the If the transmission cannot be reset, authorized dealer front wheels.

• Page 340: Driving Through Water

  STARTING AND OPERATING 339 2. Slow down if the road has standing water or puddles. Flowing/Rising Water 3. Replace the tires when tread wear indicators first WARNING! become visible. Do not drive on or across a road or path where water 4.

• Page 341
  340 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Driving through standing water may cause dam- • Always check the depth of the standing water age to your vehicle’s drivetrain components. Al- before driving through it. Never drive through ways inspect your vehicle’s fluids (i.e., engine oil, standing water that is deeper than the bottom of transmission, axle, etc.) for signs of contamination the tire rims mounted on the vehicle.

• Page 342: Power Steering

  STARTING AND OPERATING 341 POWER STEERING WARNING! The standard power steering system will give you good • Driving through standing water limits your vehi- vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical cle’s traction capabilities. Do not exceed 5 mph steering capability if power assist is lost.

• Page 343: Power Steering Fluid Check

  342 STARTING AND OPERATING • Upon initial start-up in cold weather, the power steer- Power Steering Fluid Check ing pump may make noise for a short amount of time. Checking the power steering fluid level at a defined This is due to the cold, thick fluid in the steering service interval is not required.

• Page 344: Parking Brake

  STARTING AND OPERATING 343 The foot operated parking brake is positioned below the WARNING! lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully. To Fluid level should be checked on a level surface and release the parking brake, press the park brake pedal a with the engine off to prevent injury from moving second time and let your foot up as you feel the brake…

• Page 345
  344 STARTING AND OPERATING When the parking brake is applied with the ignition difficult to move the shift lever out of PARK. The parking switch in the ON position, the “Brake Warning Light” in brake should always be applied whenever the driver is the instrument cluster will illuminate.

• Page 346: Anti-Lock Brake System (Abs)

  STARTING AND OPERATING 345 computer to modulate hydraulic pressure to prevent WARNING! (Continued) wheel lock-up and help avoid skidding on slippery • Always fully apply the parking brake when leav- surfaces. ing your vehicle, or it may roll and cause damage ABS is activated during braking under certain road or or injury.

• Page 347
  346 STARTING AND OPERATING WARNING! WARNING! (Continued) • The Anti-Lock Brake System cannot prevent acci- • The Anti-Lock Brake System contains sophisti- dents, including those resulting from excessive cated electronic equipment that may be suscep- speed in turns, following another vehicle too tible to interference caused by improperly in- closely, or hydroplaning.

• Page 348: Anti-Lock Brake Warning Light

  STARTING AND OPERATING 347 Anti-Lock Brake Warning Light If both the “Brake Warning Light” and the “Anti-Lock The “Anti-Lock Brake Warning Light” moni- Brake Warning Light” remain on, the ABS and Electronic tors the anti-lock brake system. The light will Brake Force Distribution (EBD) systems are not function- come on when the ignition switch is turned to ing.

• Page 349
  348 STARTING AND OPERATING wheel(s) and engine power is reduced, to provide en- WARNING! hanced acceleration and stability. A feature of the TCS • The TCS cannot prevent the natural laws of phys- functions similarly to a limited-slip differential, and controls the wheel spin across a driven axle.

• Page 350: Brake Assist System (Bas)

  STARTING AND OPERATING 349 Brake Assist System (BAS) WARNING! The Brake Assist System (BAS) is designed to optimize • The BAS cannot prevent the natural laws of phys- the vehicle’s braking capability during emergency brak- ing maneuvers. The system detects an emergency brak- ics from acting on the vehicle, nor can it increase ing situation by sensing the rate and amount of brake the traction afforded by prevailing road condi-…

• Page 351: Electronic Stability Program (Esp)

  350 STARTING AND OPERATING Electronic Stability Program (ESP) ESP On The Electronic Stability Program (ESP) enhances direc- This mode is the normal operating mode for ESP on tional control and stability of the vehicle under various two-wheel drive vehicles. Whenever the vehicle is driving conditions.

• Page 352: Esp/Bas Warning Light

  STARTING AND OPERATING 351 than ESP would normally allow is required to gain position, then goes out. If the “ESP/BAS Warning Light” traction. To turn ESP on again, momentarily press the comes on continuously with the engine running, a mal- “ESP OFF”…

• Page 353: Tire Safety Information

  352 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •…

• Page 354
  STARTING AND OPERATING 353 • High flotation tire sizing is based on U.S. design Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- standards and it begins with the tire diameter molded tion.
• Page 355
  354 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —…

• Page 356: Tire Identification Number (Tin)

  STARTING AND OPERATING 355 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.

• Page 357: Tire Terminology And Definitions

  356 STARTING AND OPERATING Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.

• Page 358: Tire Loading And Tire Pressure

  STARTING AND OPERATING 357 Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle Tire Placard Location…

• Page 359
  358 STARTING AND OPERATING To determine the maximum loading conditions of your 3) tire size designed for your vehicle vehicle, locate the statement “The combined weight of 4) cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
• Page 360
  STARTING AND OPERATING 359 4. The resulting figure equals the available amount of NOTE: • The following table shows examples on how to calcu- cargo and luggage load capacity. For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five late total load, cargo/luggage, and towing capacities 150 lb (68 kg) passengers in your vehicle, the amount of of your vehicle with varying seating configurations…
• Page 361
  360 STARTING AND OPERATING…

• Page 362: Tires — General Information

  STARTING AND OPERATING 361 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause accidents. recommended load capacity for your vehicle.

• Page 363: Tire Inflation Pressures

  362 STARTING AND OPERATING Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side “B” Pillar. hicle to the other can cause the vehicle to drift to The tire pressure should be checked and adjusted, and the right or left.

• Page 364: Tire Pressures For High-Speed Operation

  STARTING AND OPERATING 363 Inflation pressures specified on the placard are always inflation pressure should be increased by 3 psi (21 kPa), “cold tire inflation pressure.” Cold tire inflation pressure which equals 1 psi (7 kPa) for every 12°F (7°C) for this is defined as the tire pressure after the vehicle has not outside temperature condition.

• Page 365: Radial-Ply Tires

  364 STARTING AND OPERATING Cuts and punctures in radial tires are repairable only in WARNING! the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs. High-speed driving, with your vehicle at or above maximum load, is dangerous. The added strain on Compact Spare Tire your tires could cause them to fail.

• Page 366: Tire Spinning

  STARTING AND OPERATING 365 WARNING! (Continued) CAUTION! • Temporary-use spare tires have limited tread life. Because of the reduced ground clearance, do not take When the tread is worn to the tread wear indica- your vehicle through an automatic car wash with the tors, the temporary use spare tire needs to be compact spare installed.

• Page 367: Tread Wear Indicators

  366 STARTING AND OPERATING WARNING! • Fast spinning tires can be dangerous. Forces gen- erated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. • Do not spin your vehicle’s wheels faster than 30 mph (48 km/h), or for more than 30 seconds continuously, when you are stuck;…

• Page 368: Life Of Tire

  STARTING AND OPERATING 367 Life of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors, including, but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.

• Page 369: Snow Tires

  368 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.

• Page 370: Tire Rotation Recommendations

  STARTING AND OPERATING 369 If you need snow tires, select tires equivalent in size and These effects can be reduced by timely rotation of tires. type to the original equipment tires. Use snow tires only The benefits of rotation are especially worthwhile with in sets of four;…

• Page 371: Tire Pressure Monitor System (Tpms)

  370 STARTING AND OPERATING The suggested rotation method is shown in the following found on the tire placard located on the driver’s-side diagram. B-pillar. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease.

• Page 372
  STARTING AND OPERATING 371 The TPMS will continue to warn the driver of low tire Warning Light.” Driving the vehicle may cause the tire pressure as long as the condition exists, and will not turn pressure to rise to approximately 30 psi (207 kPa), but the off until the tire pressure is at or above recommended “TPMS Warning Light”…

• Page 373: Base System

  372 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- CAUTION! (Continued) nance, and it is the driver’s responsibility to maintain • After inspecting or adjusting the tire pressure correct tire pressure, using an accurate tire pressure always reinstall the valve stem cap.

• Page 374
  STARTING AND OPERATING 373 The Basic TPMS consists of the following components: NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this • Receiver Module information. • Four Tire Pressure Monitoring Sensors The “TPMS Warning Lamp”…

• Page 375: Premium System — If Equipped

  374 STARTING AND OPERATING 3. Accumulation of excessive snow and/or ice around 4. For each subsequent ignition switch cycle, a chime will the wheels or wheel housings. sound, the “TPMS Telltale Warning Light” will flash on and off for 75 seconds and then remain on solid. 4.

• Page 376: Tpms Low Pressure Warnings

  STARTING AND OPERATING 375 NOTE: It is particularly important to regularly check pressures are low. In addition, the EVIC will display a and maintain proper tire pressure in all the tires. Low Pressure message for three seconds and a graphic display of the pressure value(s) with the low tire(s) The Premium TPMS consists of the following compo- flashing.

• Page 377: Check Tpms Message

  376 STARTING AND OPERATING Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tire pressure value.

• Page 378
  STARTING AND OPERATING 377 will not be present, and a pressure value will be dis- 2. If you install the compact spare tire in place of a road played instead of dashes. A system fault can occur by any tire that has a pressure below the low-pressure warning of the following scenarios: limit, upon the next ignition switch cycle, the “TPMS Telltale Warning Light”…

• Page 379: Fuel Requirements

  378 STARTING AND OPERATING • This device must accept any interference received, 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, including interference that may cause undesired the TPMS will update automatically.

• Page 380: 4.0L Engine

  STARTING AND OPERATING 379 4.0L Engine Over 40 automobile manufacturers around the world The 4.0L engine is designed to meet all have issued and endorsed consistent gasoline specifica- emissions regulations and provide satisfac- tions (the World Wide Fuel Charter, WWFC) to define tory fuel economy and performance when fuel properties necessary to deliver enhanced emissions, using high-quality unleaded gasoline hav-…

• Page 381: Gasoline/Oxygenate Blends

  380 STARTING AND OPERATING Gasoline/Oxygenate Blends E85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ing 10% ethanol (E10). Gasoline with higher ethanol ates are required in some areas of the country during the content may void the vehicle’s warranty.

• Page 382: Mmt In Gasoline

  STARTING AND OPERATING 381 • disconnect and reconnect the battery to reset the It is even more important to look for gasoline without engine controller memory MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. More extensive repairs will be required for prolonged exposure to E85 fuel.

• Page 383: Fuel System Cautions

  382 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives which are now being CAUTION! sold as octane enhancers is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.

• Page 384: Carbon Monoxide Warnings

  STARTING AND OPERATING 383 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- •…

• Page 385
  384 STARTING AND OPERATING the other sections of this manual for information on CAUTION! features that are common between Flexible Fuel and gasoline only powered vehicles. Only vehicles with the E85 fuel filler door label can operate on E85. E85 Fuel Cap E85 Badge…

• Page 386: Ethanol Fuel (E85)

  STARTING AND OPERATING 385 Ethanol Fuel (E85) For best results, a refueling pattern that avoids alternat- E85 is a mixture of approximately 85% fuel ethanol and ing between E85 and unleaded gasoline is recom- 15% unleaded gasoline. mended. When you do switch fuel types, it is recommended that: WARNING! •…

• Page 387: Selection Of Engine Oil For Flexible Fuel Vehicles E85 And Gasoline Vehicles

  32°F (0°C). in MOPAR engine oils, and in equivalent oils meeting Cruising Range Chrysler Specification MS-6395. The manufacturer only Because E85 fuel contains less energy per gallon/liter recommends engine oils that are API Certified and meet than gasoline, you will experience an increase in fuel the requirements of Material Standard MS-6395.

• Page 388: Replacement Parts

  STARTING AND OPERATING 387 Replacement Parts ADDING FUEL Many components in your Flexible Fuel Vehicle (FFV) are Fuel Filler Cap (Gas Cap) designed to be compatible with ethanol. Always be sure The gas cap is located behind the fuel filler door on the that your vehicle is serviced with correct ethanol com- left side of the vehicle.

• Page 389
  388 STARTING AND OPERATING NOTE: The driver’s side sliding door cannot be opened WARNING! while the fuel door is open. This feature operates only • Never have any smoking materials lit in or near when the sliding door is fully closed prior to opening the fuel door.

• Page 390: Loose Fuel Filler Cap Message

  STARTING AND OPERATING 389 • If the gas cap is not tightened properly, the MIL may If the problem continues, the message will appear the come on. Be sure the gas cap is tightened every time next time the vehicle is started. See your authorized the vehicle is refueled.

• Page 391
  390 STARTING AND OPERATING • Gross Axle Weight Rating (GAWR) — Front Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear • Gross Axle Weight Rating (GAWR) — Rear axles. Distribute the load over the front and rear axles •…
• Page 392
  STARTING AND OPERATING 391 Rim Size Overloading This is the rim size that is appropriate for the tire size The load carrying components (axle, springs, tires, listed. wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front Inflation Pressure and rear GAWR.
• Page 393
  392 STARTING AND OPERATING Loading CAUTION! To load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items Do not load your vehicle any heavier than the GVWR down low and be sure you distribute their weight as or the maximum front and rear GAWR.
• Page 394
  STARTING AND OPERATING 393 LOADING TABLE — EXAMPLE ONLY Front Axle Rear Axle TOTAL 2,500 lbs 2,450 lbs (1 134 kg) (1 111 kg) GAWR 2,544 lbs 2,544 lbs (1 154 kg) (1 154 kg) A loaded vehicle is shown in the above table. Note that neither the GVWR nor the GAWR capacities have been exceeded.

• Page 395: Trailer Towing

  394 STARTING AND OPERATING TRAILER TOWING that you do not exceed the GVWR. Refer to “Vehicle In this section you will find safety tips and information Loading/Vehicle Certification Label” in “Starting and on limits to the type of towing you can reasonably do Operating”…

• Page 396
  STARTING AND OPERATING 395 Gross Axle Weight Rating (GAWR) Frontal Area The GAWR is the maximum capacity of the front and rear The frontal area is the maximum height multiplied by the axles. Distribute the load over the front and rear axles maximum width of the front of a trailer.
• Page 397
  396 STARTING AND OPERATING Weight-Distributing Hitch WARNING! A weight-distributing system works by applying lever- • An improperly adjusted weight-distributing hitch age through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the system may reduce handling, stability, braking tow vehicle’s front axle and the trailer’s axle(s).
• Page 398
  STARTING AND OPERATING 397 Without Weight-Distributing Hitch (Incorrect) With Weight-Distributing Hitch (Correct)
• Page 399
  398 STARTING AND OPERATING The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow, and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. TRAILER HITCH CLASSIFICATIONS Max.
• Page 400
  STARTING AND OPERATING 399 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. GCWR (Gross Com- Max. GTW (Gross Engine/Transmission Frontal Area Max. Tongue Wt. bined Wt. Rating) Trailer Wt.) Up to 2 persons &…
• Page 401
  400 STARTING AND OPERATING GCWR (Gross Com- Max. GTW (Gross Engine/Transmission Frontal Area Max. Tongue Wt. bined Wt. Rating) Trailer Wt.) Up to 2 persons & 9,000 lbs (4 082 kg) 40 sq ft (3.72 sq m) Luggage 3,800 lbs 380 lbs (172 kg) (1 723 kg)* 3.8L and 4.0L/…
• Page 402
  STARTING AND OPERATING 401 Trailer and Trailer Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
• Page 403
  402 STARTING AND OPERATING NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional • Do not tow a trailer at all during the first 500 miles factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on (805 km) the new vehicle is driven.
• Page 404
  STARTING AND OPERATING 403 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to an injury accident. vehicle and trailer. Always connect the chains to Follow these guidelines to make your trailer towing the frame or hook retainers of the vehicle hitch.
• Page 405
  404 STARTING AND OPERATING • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 3. GAWR Information” in “Starting and Operating” for the 4. Trailer tongue weight rating for that trailer hitch. proper inspection procedure.
• Page 406
  STARTING AND OPERATING 405 • An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic hydraulic brake lines.
• Page 407
  406 STARTING AND OPERATING The Trailer Tow Package may include a four-pin or a seven-pin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector.

• Page 408: Towing Tips

  STARTING AND OPERATING 407 Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic Transmission The DRIVE gear can be selected when towing. However, if frequent shifting occurs while in DRIVE, move the shift lever into third gear (with four-speed transmission) or fifth gear (with six-speed transmission).

• Page 409
  408 STARTING AND OPERATING • Use speed control in flat terrain and with light loads to The automatic transmission fluid and filter should be changed if you REGULARLY tow a trailer for more than maximize fuel efficiency. 45 minutes of continuous operation. Refer to “Mainte- Cooling System nance Schedule”…

• Page 410: Recreational Towing (Behind Motorhome, Etc.)

  STARTING AND OPERATING 409 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) CAUTION! Towing this vehicle behind another vehicle (flat- towing with all four wheels on the ground) is not recommended. NOTE: If the vehicle requires towing, make sure all four wheels are off the ground.

• Page 412: What To Do In Emergencies

  WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ….412 Secure The Spare Tire ….424 If Your Engine Overheats .

• Page 413: Hazard Warning Flasher

  412 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the center of the instrument panel above the radio. potential for overheating by taking the appropriate ac- tion.

• Page 414: Jacking And Tire Changing

  WHAT TO DO IN EMERGENCIES 413 JACKING AND TIRE CHANGING CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull • Getting under a jacked-up vehicle is dangerous. over and stop the vehicle. Idle the vehicle with the air The vehicle could slip off the jack and fall on you.

• Page 415: Jack Location

  414 WHAT TO DO IN EMERGENCIES Jack Location Spare Tire Removal The jack, jack handle and winch handle tools are stowed The spare tire is stowed inside a protective cover located behind the rear left side trim panel in the rear cargo area. under the center of the vehicle between the front doors by Turn the two cover latches to release the cover.

• Page 416: Preparations For Jacking

  WHAT TO DO IN EMERGENCIES 415 NOTE: The base console, if equipped, must be removed WARNING! to raise and lower the spare tire. Refer to “Console Features” in “Understanding the Features of Your Ve- Do not attempt to change a tire on the side of the hicle”…

• Page 417: Jacking Instructions

  416 WHAT TO DO IN EMERGENCIES NOTE: Passengers should not remain in the vehicle WARNING! (Continued) when the vehicle is being jacked. • Never start or run the engine with the vehicle on a Jacking Instructions jack. • Do not let anyone sit in the vehicle when it is on a WARNING! jack.

• Page 418
  WHAT TO DO IN EMERGENCIES 417 Jack Warning Label 1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. To remove the compact spare tire/cover assembly, assemble the winch handle extensions to form a “T”…
• Page 419
  418 WHAT TO DO IN EMERGENCIES CAUTION! The winch mechanism is designed for use with the winch “T” handle only. Use of an air wrench or other power tools is not recommended and can damage the winch. 3. Assemble the winch handle extensions to form the Spare Tire Hook and pull the compact spare tire/cover assembly from under the vehicle, refer to “1”…
• Page 420
  WHAT TO DO IN EMERGENCIES 419 WARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
• Page 421
  420 WHAT TO DO IN EMERGENCIES 4. When the compact spare tire/cover assembly is clear 5. There are two jack engagement locations on each side of the vehicle, stand the tire/cover assembly upright and of the vehicle body. These locations are on the sill flange remove the wheel spacer by squeezing the two retainer of the vehicle body.
• Page 422
  WHAT TO DO IN EMERGENCIES 421 Jack Location…
• Page 423
  422 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Do not attempt to raise the vehicle by jacking on Raising the vehicle higher than necessary can make locations other than those indicated in Step 5. the vehicle less stable. It could slip off the jack and hurt someone near it.

• Page 424: Wheel Nuts

  WHAT TO DO IN EMERGENCIES 423 10. Lower the vehicle by turning the jack screw to the 13. Place the deflated (flat) tire and compact spare tire left. cover assembly. in the rear cargo area. Do not stow the deflated tire in the spare tire location. Have the full- 11.

• Page 425: Secure The Spare Tire

  424 WHAT TO DO IN EMERGENCIES of operation, and after each time a tire is changed, to WARNING! allow the wheel nuts to become properly set. All nuts should first be firmly seated against the wheel. The nuts A loose compact spare tire/cover assembly, thrown should then be tightened to recommended torque.

• Page 426
  WHAT TO DO IN EMERGENCIES 425 2. Assemble the winch handle extensions to form the WARNING! spare tire hook, and pull the wheel spacer from under the vehicle. Verify that both retainer tabs of the wheel spacer have been properly extended through the center of 3.

• Page 427: Jump-Starting Procedure

  426 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! The winch mechanism is designed specifically to Do not use a portable battery booster pack or any stow a compact spare tire only. Do not attempt to use other booster source with a system voltage greater the winch to stow the full size flat tire, or any other than 12 Volts or damage to the battery, starter motor, full-size tire.

• Page 428: Preparations For Jump-Start

  WHAT TO DO IN EMERGENCIES 427 Preparations for Jump-Start WARNING! The battery in your vehicle is located on the left side of • Take care to avoid the radiator cooling fan when- the engine compartment. ever the hood is raised. It can start anytime the ignition switch is on.

• Page 429: Jump-Starting Procedure

  428 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.

• Page 430
  WHAT TO DO IN EMERGENCIES 429 8. Disconnect the opposite end of the positive (+) jumper WARNING! cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the 9. Disconnect the positive (+) end of the jumper cable discharged battery.

• Page 431: Freeing A Stuck Vehicle

  430 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE CAUTION! (Continued) If your vehicle becomes stuck in mud, sand or snow, it • Revving the engine or spinning the wheels too fast can often be moved by a rocking motion. Turn your may lead to transmission overheating and failure.

• Page 432: Towing A Disabled Vehicle

  WHAT TO DO IN EMERGENCIES 431 • The towing speed must not exceed 30 mph (50 km/h). WARNING! CAUTION! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or Exceeding these towing limits may cause severe even failure, of the axle and tires.

• Page 433
  432 WHAT TO DO IN EMERGENCIES Towing Without The Ignition Key CAUTION! (Continued) Special care must be taken when the vehicle is towed • Always use wheel lift equipment when towing with the ignition in the OFF position. The only approved from the front.
• Page 434
  MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 3.3/3.8L ..435 Engine Oil ……441 Engine Compartment —…
• Page 435
  434 MAINTAINING YOUR VEHICLE Brakes ……458 Front Park/Turn Signal Lamp … 481 Automatic Transmission .

• Page 436: Engine Compartment — 3.3/3.8L

  MAINTAINING YOUR VEHICLE 435 ENGINE COMPARTMENT — 3.3/3.8L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic Transmission Dipstick (3.3L Only) 8 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 9 — Coolant Pressure Cap 4 —…

• Page 437: Engine Compartment — 4.0L

  436 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 4.0L 1 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 2 — Air Cleaner Filter 8 — Engine Oil Fill 3 — Brake Fluid Reservoir 9 — Coolant Pressure Cap 4 — Battery 10 —…

• Page 438: Onboard Diagnostic System — Obd Ii

  MAINTAINING YOUR VEHICLE 437 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.

• Page 439: Emissions Inspection And Maintenance Programs

  438 MAINTAINING YOUR VEHICLE “Electronic Vehicle Information Center (EVIC)” in ”Un- For states that require an Inspection and Mainte- derstanding Your Instrument Panel” for further informa- nance (I/M), this check verifies the “Malfunction tion. Tighten the gas cap until a clicking sound is heard. Indicator Light (MIL)”…

• Page 440
  MAINTAINING YOUR VEHICLE 439 2. If you crank or start the engine, you will have to start If your OBD II system is not ready, you should see your this test over. authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, 3.

• Page 441: Replacement Parts

  440 MAINTAINING YOUR VEHICLE REPLACEMENT PARTS WARNING! Use of genuine MOPAR parts for normal/scheduled maintenance and repairs is highly recommended to en- You can be badly injured working on or around a sure the designed performance. Damage or failures motor vehicle. Only do service work for which you caused by the use of non-MOPAR parts for maintenance have the knowledge and the proper equipment.

• Page 442: Engine Oil

  Immediately have potential malfunctions fully warmed engine is shut OFF or before starting the examined by an authorized Chrysler Group LLC engine after it has sat overnight. dealership or qualified repair center.

• Page 443
  Such damage is For best performance and maximum protection under all not covered by the New Vehicle Limited Warranty. types of operating conditions, the manufacturer only recommends engine oils that are API certified and meet the requirements of Chrysler Material Standard MS-6395.
• Page 444
  MAINTAINING YOUR VEHICLE 443 Engine Oil Viscosity (SAE Grade) – 3.3L & 3.8L For information on engine oil filler cap location, refer to Gasoline Engines “Engine Compartment” in “Maintaining Your Vehicle” SAE 5W-20 engine oil is recommended for all operating for further information.

• Page 445: Engine Oil Filter

  444 MAINTAINING YOUR VEHICLE Disposing of Used Engine Oil and Oil Filters Engine Air Cleaner Filter Care should be taken in disposing of used engine oil and Refer to “Maintenance Schedule” for the proper mainte- oil filters from your vehicle. Used oil and oil filters, nance intervals.

• Page 446: Exhaust System

  MAINTAINING YOUR VEHICLE 445 Exhaust System WARNING! The best protection against carbon monoxide entry into • Exhaust gases can injure or kill. They contain the vehicle body is a properly maintained engine exhaust system. carbon monoxide (CO), which is colorless and odorless.

• Page 447
  446 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.

• Page 448: Maintenance-Free Battery

  MAINTAINING YOUR VEHICLE 447 To minimize the possibility of catalytic converter dam- WARNING! age: • Battery fluid is a corrosive acid solution and can • Do not shut off the engine or interrupt the ignition, burn or even blind you. Do not allow battery fluid when the transmission is in gear and the vehicle is in to contact your eyes, skin, or clothing.

• Page 449: Air Conditioner Maintenance

  448 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a system positive post and the negative cable is attached to…

• Page 450
  MAINTAINING YOUR VEHICLE 449 Refrigerant Recovery and Recycling WARNING! R-134a air conditioning refrigerant is a hydrofluoro- • Use only refrigerants and compressor lubricants carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. How- approved by the manufacturer for your air condi- ever, the manufacturer recommends that air conditioning tioning system.
• Page 451
  450 MAINTAINING YOUR VEHICLE WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedure to re- place the filter: 1.

• Page 452: Body Lubrication

  MAINTAINING YOUR VEHICLE 451 hood latching components to ensure proper function. CAUTION! When performing other underhood services, the hood latch, release mechanism and safety catch should be The A/C air filter is labeled with an arrow to indicate cleaned and lubricated. airflow direction through the filter.

• Page 453
  452 MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from The washer fluid reservoir will hold a full gallon of fluid the windshield. Keep the blade rubber out of contact with when the Low Washer Fluid Light illuminates. petroleum products such as engine oil, gasoline, etc.

• Page 454: Cooling System

  MAINTAINING YOUR VEHICLE 453 Cooling System rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front of WARNING! the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden •…

• Page 455: Maintaining Your Vehicle

  454 MAINTAINING YOUR VEHICLE Cooling System – Drain, Flush and Refill CAUTION! If the engine coolant (antifreeze) is dirty or contains a • Mixing of engine coolant (antifreeze) other than considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough specified Hybrid Organic Additive Technology rinsing to remove all deposits and chemicals.

• Page 456
  MAINTAINING YOUR VEHICLE 455 • The manufacturer recommends using MOPAR CAUTION! (Continued) Antifreeze/Coolant 5 Year/100,000 Mile Formula • This vehicle has not been designed for use with HOAT (Hybrid Organic Additive Technology) or Propylene Glycol-based engine coolant (anti- equivalent. freeze). Use of Propylene Glycol-based engine •…
• Page 457
  456 MAINTAINING YOUR VEHICLE NOTE: Mixing engine coolant (antifreeze) types will WARNING! decrease the life of the engine coolant (antifreeze) and • The warning words “DO NOT OPEN HOT” on will require more frequent coolant changes. the cooling system pressure cap are a safety pre- Cooling System Pressure Cap caution.
• Page 458
  MAINTAINING YOUR VEHICLE 457 Disposal of Used Coolant engine coolant (antifreeze) freeze point or replacing the Used ethylene glycol-based engine coolant (antifreeze) is engine coolant (antifreeze). Advise your service atten- a regulated substance requiring proper disposal. Check dant of this. As long as the engine operating temperature with your local authorities to determine the disposal is satisfactory, the coolant bottle only needs to be checked rules for your community.

• Page 459: Brakes

  458 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be bottle overflow hoses are not kinked or obstructed. safely driven.

• Page 460
  MAINTAINING YOUR VEHICLE 459 Clean the top of the master cylinder area before removing WARNING! the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir. Riding the brakes can lead to brake failure and possibly an accident.
• Page 461
  460 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • To avoid contamination from foreign matter or • Use only manufacturer’s recommended brake moisture, use only new brake fluid or fluid that fluid. Refer to “Fluids, Lubricants, and Genuine has been in a tightly closed container. Keep the Parts”…

• Page 462: Automatic Transmission

  MAINTAINING YOUR VEHICLE 461 All six–speed transmissions are equipped with a capped WARNING! (Continued) dipstick tube. It is sealed and should not be tampered • Do not allow petroleum based fluid to contami- with. Your authorized dealer has the necessary tools to nate the brake fluid.

• Page 463
  462 MAINTAINING YOUR VEHICLE 2. The engine should be running at curb idle speed for a CAUTION! minimum of 60 seconds. Using a transmission fluid other than the manufac- 3. Fully apply the parking brake. turer’s recommended fluid may cause deterioration 4.
• Page 464
  MAINTAINING YOUR VEHICLE 463 a. If the fluid is hot, the reading should be in the Fluid Level Check (3.8L and 4.0L Engines with crosshatched area marked “HOT” (between the upper Six-Speed Automatic Transmission) – If Equipped two holes in the dipstick). The six-speed automatic transmission is a sealed unit and has no dipstick.

• Page 465: Appearance Care And Protection From Corrosion

  464 MAINTAINING YOUR VEHICLE The following maintenance recommendations will enable CAUTION! you to obtain maximum benefit from the corrosion resistance built into your vehicle. Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- What Causes Corrosion? nents.

• Page 466
  MAINTAINING YOUR VEHICLE 465 Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR Car Wash or equiva- such as steel wool or scouring powder, which will lent, or a mild car wash soap, and rinse the panels scratch metal and painted surfaces.
• Page 467
  466 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to an accident or heavy soil and/or excessive brake dust, use MOPAR similar cause which destroys the paint and protective Wheel Cleaner or equivalent or select a nonabrasive, coating, have your vehicle repaired as soon as pos- non-acidic cleaner.
• Page 468
  MAINTAINING YOUR VEHICLE 467 • For tough stains, apply MOPAR Total Clean or Cleaning Interior Trim equivalent, or a mild soap solution to a clean, damp Interior trim should be cleaned starting with a damp cloth and remove the stain. Use a fresh, damp towel to cloth, a damp cloth with MOPAR Total Clean or equiva- remove soap residue.
• Page 469
  468 MAINTAINING YOUR VEHICLE solvents, detergents, or ammonia-based cleaners to clean To minimize the possibility of scratching the lenses and your leather upholstery. Application of a leather condi- reducing light output, avoid wiping with a dry cloth. To tioner is not required to maintain the original condition. remove road dirt, wash with a mild soap solution fol- lowed by rinsing.

• Page 470: Cleaning The Instrument Panel Cupholders

  MAINTAINING YOUR VEHICLE 469 Cleaning Plastic Instrument Cluster Lenses Replace the seat belts if they appear frayed or worn, or if The lenses in front of the instruments in this vehicle are the buckles do not work properly. molded in clear plastic. When cleaning the lenses, care Cleaning the Instrument Panel Cupholders must be taken to avoid scratching the plastic.

• Page 471: Fuses

  470 MAINTAINING YOUR VEHICLE Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer. FUSES Totally Integrated Power Module (TIPM) The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery.

• Page 472
  MAINTAINING YOUR VEHICLE 471 The numbers inside the TIPM cover correspond to the CAUTION! following table. • When installing the Totally Integrated Power FUSES/TIPM Module cover, it is important to ensure the cover is Cartridge Cavity Mini-Fuse Description properly positioned and fully latched. Failure to Fuse do so may allow water to get into the Integrated 40 Amp…
• Page 473
  472 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 30 Amp — Antilock Brakes 30 Amp — Power Sliding Pink Valve/Stability Pink Door Module/ Control System Anti–Theft Module Relay 40 Amp — Power Memory Lock Feed Green Seat –…
• Page 474
  MAINTAINING YOUR VEHICLE 473 FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 60 Amp Yel- — Radiator Fan — 25 Amp Inverter Natural 30 Amp — Front Wiper — 20 Amp Yel- Power Outlet Pink LO/HI #1 (ACC), Rain Sensor 20 Amp…
• Page 475
  474 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse — 15 Amp Ignition Off — 20 Amp Yel- Ignition Off Blue Draw — Video Draw— Instru- System, Satel- ment Cluster, lite Radio, SIREN, Clock DVD, Hands- Module, Multi- Free Module,…
• Page 476
  MAINTAINING YOUR VEHICLE 475 FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse — 20 Amp Yel- Rear View Mir- — 10 Amp Red Airbag ror, Instrument Module/ Cluster, Multi- Occupant Clas- Function Con- sification Mod- trol Switch, Tire Pressure Moni- —…
• Page 477
  476 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse — 15 Amp Instrument — 20 Amp Yel- Fuel Pump, Blue Cluster Interior Diesel Lift Light, Switch Pump – Export Bank, Steering Only Column Mod- —…
• Page 478
  MAINTAINING YOUR VEHICLE 477 FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse — 10 Amp Red Powertrain — 10 Amp Red Airbag Module, Control Mod- TT EUROPE ule, Transmis- — 10 Amp Red Powertrain sion Feed, Control Mod- Transmission ule, Transmis-…
• Page 479
  478 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse — 10 Amp Red Park Assist, — 10 Amp Red Antilock Heater Climate Brakes, Stability Control System Control System, Module, Head- Stop Lamp lamp Wash, Switch, Fuel Compass, IR Pump Rly Hi…

• Page 480: Vehicle Storage

  MAINTAINING YOUR VEHICLE 479 breaker located under the instrument panel near the system lubrication to minimize the possibility of com- steering column. If you experience temporary or perma- pressor damage when the system is started again. nent loss of these systems, see your authorized dealer for REPLACEMENT BULBS service.

• Page 481: Bulb Replacement

  480 MAINTAINING YOUR VEHICLE All of the interior bulbs are glass wedge base or glass BULB REPLACEMENT cartridge types. Aluminum base bulbs are not approved High Intensity Discharge Headlamps (HID) — If and should not be used for replacement. Equipped The headlamps are a type of high voltage discharge tube.

• Page 482: Quad Headlamps

  MAINTAINING YOUR VEHICLE 481 NOTE: On vehicles equipped with High Intensity Dis- CAUTION! charge (HID) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- Do not touch the new bulb with your fingers. Oil ishes and becomes more white after approximately contamination will severely shorten bulb life.

• Page 483: Front Side Marker Lamp

  482 MAINTAINING YOUR VEHICLE Front Side Marker Lamp 1. From behind the bumper fascia, or the access panel on the air dam, twist the bulb counterclockwise, and remove 1. Raise the hood to access the rear of the headlamp bulb. housing.

• Page 484
  MAINTAINING YOUR VEHICLE 483 2. Remove the tail lamp assembly by removing the two NOTE: • If a screwdriver is used, make sure a soft material is screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to placed between the vehicle body and tool so not to disengage the two ball studs.

• Page 485: Center High-Mounted Stop Lamp (Chmsl)

  484 MAINTAINING YOUR VEHICLE 5. Replace the bulb, reinstall the socket, and reattach the lamp assembly. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately. The CHMSL must be replaced as an assembly, see your authorized dealer. License Lamp The license plate lamp is located under the tailgate light bar and above the license plate.

• Page 486: Fluid Capacities

  MAINTAINING YOUR VEHICLE 485 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.3L and 3.8L Engine (SAE 5W-20, API Certified) 5 Quarts 4.7 Liters 4.0L Engine (SAE 10W-30, API Certified) 5.5 Quarts 5.2 Liters Cooling System * 3.3L, 3.8L, and 4.0L Engine (MOPAR Engine Coolant/ 13.4 Quarts…

• Page 487: Fluids, Lubricants And Genuine Parts

  Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Engine Oil – 3.3L and 3.8L Engines Chrysler Material Standard MS-6395. Refer to your oil filler cap for cor- rect SAE grade. Use API Certified SAE 10W-30 Engine Oil, meeting the requirements of Engine Oil –…

• Page 488: Chassis

  MAINTAINING YOUR VEHICLE 487 Chassis Component Fluid, Lubricant, or Genuine Part MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed Automatic Transmission ATF+4 product. MOPAR DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 Brake Master Cylinder brake fluid is not available, then DOT 4 is acceptable.

• Page 490
  MAINTENANCE SCHEDULES CONTENTS Emissions Control System Maintenance ..490 Required Maintenance Intervals ..492 Maintenance Schedule ….490…
• Page 491
  490 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in bold type The oil change indicator system will remind you that it is must be done at the times or mileages specified to ensure time to take your vehicle in for scheduled maintenance. the continued proper functioning of the emissions control On Non-EVIC equipped vehicles, CHAngE OIL will system.
• Page 492
  MAINTENANCE SCHEDULES 491 NOTE: “Understanding Your Instrument Panel” or under “In- • The oil change indicator message will not monitor the strument Cluster Description/Odometer/Trip Odom- time since the last oil change. Change your vehicle’s eter” in “Understanding Your Instrument Panel” for oil if it has been six months since your last oil change, further information.
• Page 493
  492 MAINTENANCE SCHEDULES • Inspect the battery and clean and tighten the terminals Required Maintenance Intervals as required. Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. • Check the fluid levels of the coolant reservoir, the brake master cylinder, the power steering and the transmission and add as needed.
• Page 494
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…

• Page 495: Service Schedule

  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…

• Page 496
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 497
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 498
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 499
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 500
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 501
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 502
  ❏ Replace the timing belt (4.0L engine). ❏ Flush and replace the engine coolant if not done at 60 months. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 503
  ❏ Replace accessory drive belt(s). ❏ Change the automatic transmission fluid & filter. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 504
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 505
  ❏ Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. Odometer Reading Date Odometer Reading Date Repair Order # Dealer Code Repair Order # Dealer Code Signature Authorized Chrysler Dealer Signature Authorized Chrysler Dealer…
• Page 506
  • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer…

• Page 508: If You Need Consumer Assistance

  If You Need Assistance ….509 Reporting Safety Defects ….512 Chrysler Group LLC Customer Center ..510 In The 50 United States And Washington, D.C.

• Page 509
  508 IF YOU NEED CONSUMER ASSISTANCE Department Of Transportation Uniform Tire Traction Grades ….. 515 Quality Grades ……515 Temperature Grades .

• Page 510: Suggestions For Obtaining Service For Your Vehicle

  IF YOU NEED CONSUMER ASSISTANCE 509 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the…

• Page 511: Chrysler Group Llc Customer Center

  • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O. Box 21–8004 • If for some reason you are still not satisfied, talk to the Auburn Hills, MI 48321–8004…

• Page 512: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)

  IF YOU NEED CONSUMER ASSISTANCE 511 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.

• Page 513: Warranty Information

  See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.

• Page 514: In Canada

  IF YOU NEED CONSUMER ASSISTANCE 513 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.

• Page 515
  Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles. A complete working knowledge of the…
• Page 516
  IF YOU NEED CONSUMER ASSISTANCE 515 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
• Page 517
  516 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
• Page 518
  INDEX…
• Page 519
  518 INDEX Adding Engine Coolant (Antifreeze) ..455 Airbag Maintenance ….. . . 80 Adding Fuel .
• Page 520
  INDEX 519 Automatic Transaxle ….. . 330 Blind Spot Monitoring ….117 Adding Fluid .
• Page 521
  520 INDEX Caps, Filler Child Restraint ……87,89 Fuel ……. 387 Child Restraint Tether Anchors .
• Page 522
  INDEX 521 Connector Selection of Coolant (Antifreeze) ..454,485,486 UCI ……. . 289 Cruise Control (Speed Control) .
• Page 523
  522 INDEX Engine Oil ……444 Electronic Vehicle Information Center Domelight ……160 (EVIC) .
• Page 524
  INDEX 523 Oil Change Interval ….442 Filters Oil Disposal ……444 Air Cleaner .
• Page 525
  524 INDEX Fluid Capacities ……485 Gasoline ……378 Fluid Leaks .
• Page 526
  INDEX 525 Speedometer ……236 Time Delay ……163 Tachometer .
• Page 527
  526 INDEX Information Center, Vehicle ….250 Keyless Entry System ….. . 19 Inside Rearview Mirror .
• Page 528
  INDEX 527 Back-Up ……482 Lights On Reminder ….163 Battery Saver .
• Page 529
  528 INDEX Warning (Instrument Cluster Description) ..233 Map/Reading Lights ….. 189 Load Leveling System ….221 Memory Feature (Memory Seat) .
• Page 530
  INDEX 529 New Vehicle Break-In Period ….100 Onboard Diagnostic System ….437,438 Opener, Garage Door (HomeLink ) .
• Page 531
  530 INDEX Power Radiator Cap (Coolant Pressure Cap) ..453,456 Door Locks ……32 Radio Operation .
• Page 532
  INDEX 531 Replacement Parts ….. . . 440 Schedule, Maintenance ….490 Replacement Tires .
• Page 533
  532 INDEX Memory ……153 Signals, Turn ….104,165,236,481,482 Power .
• Page 534
  INDEX 533 Steering Wheel Mounted Sound System Tire and Loading Information Placard ..357 Controls ……300 Tire Identification Number (TIN) .
• Page 535
  534 INDEX Replacement ……367 Minimum Requirements ….402 Rotation .
• Page 536
  INDEX 535 Trip Odometer ……245 Video Entertainment System™ Turn Signals ….165,236,481,482 (Rear Seat Video System) .
• Page 537
  536 INDEX Power ……. 36 Windshield Wiper Blades ….451 Rear Vent .
• Page 538
  Chrysler Group LLC 10Y531-126-AC Printed in U.S.A. 3rd Edition…

1. Manuals
2. Brands
3. Chrysler Manuals
4. Automobile
5. TOWN & COUNTRY 2010
6. User manual

• Page 1
  Town & Country User Guide 2010…
• Page 2
  Owner’s Manual, Navigation Radio or Multimedia Radio Manual or Warranty Booklet by calling 1-800-992-1997 (U.S.) or 1-800-387-1143 (Canada) or by contacting your dealer. Replacement manuals may be purchased by visiting www.techauthority.com. Copyright © 2009 Chrysler Group LLC.

• Page 3: Table Of Contents

  POWER OUTLETS … . . 41 CHRYSLER GROUP LLC ..2 uconnect™ phone … . 42 CONTROLS AT A GLANCE VOICE RECOGNITION .

• Page 4: Introduction/Welcome

  Vehicles Sold In Canada With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore.

• Page 5
  Never park your vehicle over dry grass or other combustible materials. The heat from your vehicle exhaust system could cause a fire. CHRYSLER, DODGE, JEEP, ATF+4, MOPAR and uconnect are registered trademarks of Chrysler Group LLC. COPYRIGHT ©2009 CHRYSLER GROUP LLC…

• Page 6: Controls At A Glance

  CONTROLS AT A GLANCE DRIVER COCKPIT…

• Page 7
  CONTROLS AT A GLANCE…

• Page 8: Instrument Cluster

  CONTROLS AT A GLANCE INSTRUMENT CLUSTER Warning Lights — Low Fuel Warning Light — Charging System Light** — Oil Pressure Warning Light** — Anti-Lock Brake (ABS) Light** — Airbag Warning Light** — Electronic Throttle Control (ETC) Light — Tire Pressure Monitoring System (TPMS) Light — Engine Temperature Warning Light — Seat Belt Reminder Light BRAKE…

• Page 9
  CONTROLS AT A GLANCE Indicators — Turn Signal Indicators — High Beam Indicator — Front Fog Light Indicator — Vehicle Security Indicator* — Electronic Stability Program (ESP)/Traction Control System (TCS) Indicator Odometer Messages ECO — Fuel Saver Indicator LoWASH — Low Washer Fluid door — Door Ajar noFUSE* — Fuse Fault gASCAP — Fuel Cap Fault…

• Page 10: Getting Started

  GETTING STARTED KEY FOB Locking And Unlocking The Doors/Liftgate • Press the LOCK button once to lock all the doors and the liftgate. Press the UNLOCK button once to unlock the driver’s door only and twice within five seconds to unlock all the doors and liftgate.

• Page 11: Theft Alarm

  GETTING STARTED Panic Alarm • Press the PANIC button once to turn the panic alarm on. • Wait approximately three seconds and press the button a second time to turn the panic alarm off. Power Liftgate • Press the LIFTGATE button twice within five seconds to power open/close the Power Liftgate.

• Page 12: Front Seats

  GETTING STARTED FRONT SEATS WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Only adjust a seat while the vehicle is parked. Manual Seat Adjustment Forward/Rearward •…

• Page 13
  GETTING STARTED Manual Lumbar Adjust Lever • Rotate the lumbar adjustment lever downward to increase the support or upward to decrease the support. Eight-Way Driver And Passenger Power Seat • The recline switch, located on the outboard side of the seat, controls seatback adjustment.
• Page 14
  GETTING STARTED WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.

• Page 15: Tilt Steering Column

  GETTING STARTED • Place the ignition switch in the ON position, select Remote Linked to Memory in the Electronic Vehicle Information Center (EVIC) and enter Yes. • Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob.

• Page 16: Programmable Features

  GETTING STARTED WARNING! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. CAUTION! Do not place any article under the adjustable pedals or impede its ability to move, as it may cause damage to the pedal controls.

• Page 17
  GETTING STARTED Unlock On First Press • To unlock either the driver’s side, or all doors, on the first press of the UNLOCK button: • Press and hold the LOCK button for at least 4 seconds, but no longer than 10 seconds.

• Page 18: Operating Your Vehicle

  OPERATING YOUR VEHICLE TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER Turn Signal/Lane Change Assist • Tap the lever up or down once and the turn signal (right or left) will flash three times and automatically turn off. • Vehicles equipped with Blind Spot Monitoring may be programmed to add a visual alert when signaling a lane change;…

• Page 19: Headlight Switch And Halo Light Switch

  OPERATING YOUR VEHICLE High Beams • Push the lever away from you to activate the high beams. • A high beam symbol will illuminate in the cluster to indicate the high beams are on. NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent headlight glare and as a courtesy to other motorists.

• Page 20: Speed Control Lever

  OPERATING YOUR VEHICLE SPEED CONTROL LEVER Cruise ON/OFF • Push the ON/OFF button to activate the Speed Control. • CRUISE will appear on the instrument cluster to indicate the Speed Control is on. • Push the ON/OFF button a second time to turn the system off.

• Page 21: Electronic Range Selection (Ers)

  OPERATING YOUR VEHICLE ELECTRONIC RANGE SELECTION (ERS) • The Electronic Range Select (ERS) feature allows you to select the desired top gear. For example, if you shift the transaxle into third gear, the transaxle will never shift above third gear, but can shift down to second or first gear automatically when needed.

• Page 22: Front Three Zone Manual Climate Controls

  OPERATING YOUR VEHICLE FRONT THREE ZONE MANUAL CLIMATE CONTROLS Air Recirculation • Use recirculation for maximum A/C operation. • For window defogging, turn the recirculation button off. • Recirculation is not allowed in defrost, floor, defrost/floor (mix) modes. Rear Window Defroster •…

• Page 23: Front Three Zone Automatic Temperature Controls (Atc)

  OPERATING YOUR VEHICLE Activating Rear Passenger Climate Controls • Rotate the rear blower control, located on the instrument panel, to the “RR” position. This enables the rear passenger climate controls located in the headliner above the second row seats. FRONT THREE ZONE AUTOMATIC TEMPERATURE CONTROLS (ATC)

• Page 24
  OPERATING YOUR VEHICLE Automatic Operation • Push the AUTO mode button to activate the ATC system. • Select the desired temperature by rotating the temperature controls for the driver or passenger. • The system will maintain the set temperature automatically. Air Conditioning (A/C) •…

• Page 25: Parksense ® Rear Park Assist

  OPERATING YOUR VEHICLE Activating Rear Automatic Temperature Control • Pressing the REAR LOCK button for the Rear ATC System from the front lower ATC panel, illuminates a LOCK symbol in the rear display. The rear temperature and air source are controlled from the front lower ATC panel. •…

• Page 26: Rear Cross Path With Blind Spot Monitoring

  OPERATING YOUR VEHICLE REAR CROSS PATH WITH BLIND SPOT MONITORING • The Blind Spot Monitoring (BSM) system warning light, located in the outside mirrors, will illuminate if a vehicle moves into a blind spot zone. • The BSM system can also be configured to sound an audible (chime) alert and mute the radio to notify you of objects that have entered the detection zones.

• Page 27: Stow ‘N Go Seating

  OPERATING YOUR VEHICLE ® STOW ’N GO SEATING • Move the front seat fully forward. Lower the head restraints and raise the armrests on the second row seat. • Slide the storage bin locking mechanism to the “LOCK“ position and then pull up on the storage bin latch to open the cover.

• Page 28: Swivel N’ Go™ Seating With Table

  OPERATING YOUR VEHICLE SWIVEL N’ GO™ SEATING WITH TABLE To Swivel The Seats • Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation. Once the seat begins to rotate, the handle may be released.

• Page 29: Third Row Power Recliner

  OPERATING YOUR VEHICLE To Remove The Seats • Remove any obstructions from the floor behind the seat, and stow the third row seat. • Pull up on the release bar located at the bottom front edge of the swivel seat. •…

• Page 30: Power Sunroof

  OPERATING YOUR VEHICLE POWER SUNROOF • The power sunroof switch is located on the overhead console. WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.

• Page 31: Wind Buffeting

  OPERATING YOUR VEHICLE WIND BUFFETING • Wind buffeting can be described as a helicopter-type percussion sound. If buffeting occurs with the rear windows open, adjust the front and rear windows together. • If buffeting occurs with the sunroof open, adjust the sunroof opening, or adjust any window.

• Page 32: Electronics

  ELECTRONICS NON-TOUCH-SCREEN RADIOS RES Radio RES/RSC Radio…

• Page 33
  ELECTRONICS NOTE: uconnect™ phone and Voice Recognition are vehicle options which must be ordered separately. The buttons on the radio will only be active if the vehicle has been equipped with the option. • The radio sales code is located on the lower right side of the radio faceplate. •…

• Page 34: Touch-Screen Radios

  ELECTRONICS TOUCH-SCREEN RADIOS Navigation Radio – RER Multimedia Radio – RBZ…

• Page 35
  ELECTRONICS NOTE: uconnect™ phone and Voice Recognition are vehicle options which must be ordered separately. The buttons on the radio will only be active if the vehicle has been equipped with the option. • The radio sales code is located on the lower right side of the radio faceplate. •…
• Page 36
  Navigation Technologies . Not all roads are digitized. • For software updates, visit http://www.chrysler.com/en/owners/mygig/ website, visit http://www.navteq.com website, or contact your authorized dealer for the latest available software. NOTE: Many features of this radio are speed dependent. For your own safety, it is not possible to use the touch-screen keyboard to enter a name (e.g., street name)
• Page 37
  ELECTRONICS New Destination • Press the NAV hard-key to access the Navigation Main Menu. • Touch the NEW DESTINATION soft-key to program a destination, then select the destination soft-key of your choice. Program/Storing Home Address • Press the NAV hard-key to access the Navigation Main Menu. •…

• Page 38: Remote Audio Controls

  ELECTRONICS REMOTE AUDIO CONTROLS • The switches are located on the rear surface of the steering wheel. Right Switch • Press the switch up or down to increase and decrease the volume. • Press the button in the center to change modes AM/FM/CD/SAT.

• Page 39
  ELECTRONICS Operation Of The Touch-Screen Radio/DVD Player • To view a DVD press the OPEN/CLOSE hard-key on the touch-screen radio and insert the disc or insert the disc into the optional DVD player. Playback will begin automatically after the DVD is recognized by the disc drive. If playback does not begin automatically when the disc is inserted into the DVD player press the PLAY button.

• Page 40: Universal Consumer Interface

  ELECTRONICS Auxiliary Audio/Video Input Jacks • The AUX jacks are located on the drivers side rear trim panel behind the sliding door. • Connect the video game or other external media devises to the AUX jacks following the color coding for the VES™ jacks. •…

• Page 41: Electronic Vehicle Information Center (Evic)

  ELECTRONICS ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) • The EVIC features a driver interactive display that is located in the instrument cluster. Pressing the controls on the steering wheel allows the driver to select vehicle information and Personal Settings. For additional information refer to Programmable Features in this guide.

• Page 42
  ELECTRONICS WARNING! • Your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse”…

• Page 43: Power Inverter

  ELECTRONICS POWER INVERTER • There is a 115–volt, 150–watt power inverter outlet located on the left rear trim panel immediately behind the second row left passenger seat. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 watts.

• Page 44: Uconnect™ Phone

  ELECTRONICS uconnect™ phone • The uconnect™ phone is a voice-activated, hands-free, in-vehicle communications system. • The uconnect™ phone allows you to dial a phone number with your cellular phone using simple voice commands. • Please refer to uconnect™ phone in the uconnect™ User’s Manual on the DVD for further details.

• Page 45: Voice Recognition

  ELECTRONICS Phonebook (uconnect™ local) Edit • Press the Phone button • (After the BEEP), say “phonebook”. • (After the BEEP), say “new entry” or “list names” or “delete”. • Follow the prompts. Receiving A Call – Accept (And End) • When an incoming call rings / is announced on uconnect™, press the Phone button •…

• Page 46
  ELECTRONICS Changing The Volume • Start a dialogue by pressing the VR button , then say a command (e.g., “tutorial”). • Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Recognition system is speaking. Please note the volume setting for Voice Recognition is different than the audio system.

• Page 47: Utility

  UTILITY Cargo Area Storage IN-FLOOR STORAGE – ® • The liftgate sill plate has a raised line STOW N’ GO with the statement “Load To This Second Row Seat Storage Line”. This line indicates how far Bins rearward cargo can be placed without interfering with liftgate •…

• Page 48: Trailer Towing Weights (Maximum Trailer Weight Ratings)

  UTILITY…

• Page 49: Recreational Towing (Behind Motorhome, Etc.)

  UTILITY RECREATIONAL TOWING BRAKE/TRANSAXLE INTERLOCK MANUAL (BEHIND MOTORHOME, OVERRIDE ETC.) • The manual override may be used in CAUTION! the event that the shift lever should fail to move from PARK with the Key Towing this vehicle behind another Fob in the ON position and the brake vehicle (flat-towing with all four pedal pressed.

• Page 50: What To Do In Emergencies

  WHAT TO DO IN EMERGENCIES 24 HOUR TOWING ASSISTANCE • Dial toll-free 1-800-521-2779. • Provide your name, vehicle identification number and license plate number. • Provide your location, including telephone number, from which you are calling. • Briefly describe the nature of the problem and answer a few simple questions. •…

• Page 51
  WHAT TO DO IN EMERGENCIES — Engine Temperature Warning Light • This light warns of an overheated engine condition. • If the light turns on or flashes continuously while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle.
• Page 52
  WHAT TO DO IN EMERGENCIES — Electronic Stability Program (ESP) Indicator Light/Brake Assist System (BAS) Warning Light • If the ESP/BAS warning light comes on continuously with the engine running, a malfunction has been detected. • If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), we recommend you drive to the nearest Service Center as soon as possible to have the problem diagnosed and corrected.

• Page 53: If Your Engine Overheats

  WHAT TO DO IN EMERGENCIES — Airbag Warning Light • If the light is not on during starting, stays on, or turns on while driving, we recommend you drive to the nearest Service Center and have the system serviced as soon as possible. Fuel Cap/Loose Gas Cap Message •…

• Page 54: Jacking And Tire Changing

  WHAT TO DO IN EMERGENCIES CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads HOT (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on HOT (H), and you hear continuous chimes, turn the engine off immediately and call for service.

• Page 55
  WHAT TO DO IN EMERGENCIES Jack Location • The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the rear cargo area. Turn the two cover latches to release the cover. • Remove the pouch containing the scissors jack, jack handle, and tools.
• Page 56
  WHAT TO DO IN EMERGENCIES • Retrieve the spare tire from under the vehicle with the provided spare tire hook. Preparations For Jacking • Park on a firm, level surface. Avoid ice or slippery areas. • Set the parking brake and shift the transmission into PARK. •…
• Page 57
  WHAT TO DO IN EMERGENCIES Jacking And Tire Changing Instructions WARNING! Carefully follow these tire changing procedures to help prevent personal injury or damage to your vehicle: Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. •…
• Page 58
  WHAT TO DO IN EMERGENCIES • Raise the vehicle by turning the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident.

• Page 59: Jump-Starting

  WHAT TO DO IN EMERGENCIES JUMP-STARTING WARNING! Any procedure other than the following could result in: • Personal injury caused by electrolyte squirting out the battery vent, • Personal injury or property damage due to battery explosion, • Damage to the charging system of the booster vehicle or of the immobilized vehicle.

• Page 60
  WHAT TO DO IN EMERGENCIES WARNING! (Continued) • A battery generates hydrogen gas which is flammable and explosive. Keep flames or sparks away from the battery vent holes. Don’t lean over the battery when attaching clamps or allow the clamps to touch each other. •…

• Page 61: Towing A Disabled Vehicle

  WHAT TO DO IN EMERGENCIES…

• Page 62: Freeing A Stuck Vehicle

  WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE • If your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels.

• Page 63: Event Data Recorder (Edr)

  WHAT TO DO IN EMERGENCIES EVENT DATA RECORDER (EDR) • This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.

• Page 64: Maintaining Your Vehicle

  MAINTAINING YOUR VEHICLE OPENING THE HOOD • Pull the hood release lever located on the instrument panel, below the steering column. • Raise the hood and locate the safety catch lever, in the middle of the hood opening. • Move the safety latch while lifting the hood at the same time. •…

• Page 65: Engine Compartment

  MAINTAINING YOUR VEHICLE…

• Page 66
  MAINTAINING YOUR VEHICLE…

• Page 67: Fluids And Capacities

  Engine Oil with API certified 10W-30 engine oil, Meeting 5.5 quarts Filter 4.0L the requirements of Chrysler Material (5.2 Liters) Standard MS-6395. Refer to your oil filler cap for correct SAE grade. Engine Oil with API certified 5W-20 engine oil, Meeting 5 Quarts Filter 3.3L and 3.8L…

• Page 68: Maintenance Chart

  MAINTAINING YOUR VEHICLE…

• Page 69: Maintenance Record

  MAINTAINING YOUR VEHICLE Maintenance Record Odometer Date Signature, Authorized Service Center 6,000 Miles (10,000 km) or 6 Months 12,000 Miles (20,000 km) or 12 Months 18,000 Miles (30,000 km) or 18 Months 24,000 Miles (40,000 km) or 24 Months 30,000 Miles (50,000 km) or 30 Months 36,000 Miles…

• Page 70: Fuses

  MAINTAINING YOUR VEHICLE FUSES…

• Page 71
  MAINTAINING YOUR VEHICLE Totally Integrated Power Module (TIPM) • The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery. This center contains cartridge fuses, mini-fuses and relays. Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green Power Folding Seat 30 Amp Pink Power Liftgate Module…
• Page 72
  MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 15 Amp Blue Ignition Off Draw — Vehicle Entertainment System (IOD-VES), Satellite Digital Audio Receiver (SDARS), DVD, Hands-Free Module (HFM), Universal Garage Door Opener (UGDO), Vanity Lamp (VANITY LP), Streaming Video Module 10 Amp Red (Ignition Off Draw) IOD-HVAC/ATC 30 Amp Green…

• Page 73: Tire Pressures

  MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 10 Amp Red Ignition Switch (IGN SW), Window Module (WIN MOD), PEM, Steering Column Lock 10 Amp Red Next Generation Controller (NGC), PCM, Transmission Feed (TRANS FEED), TCM 10 Amp Red Occupant Classification Module (OCM) 15 Amp Blue Rear Wiper Module (RR WIPER…

• Page 74: Wheel And Wheel Trim Care

  MAINTAINING YOUR VEHICLE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. WARNING! Improperly inflated tires are dangerous and can cause accidents. Under-inflation is the leading cause of tire failure and may result in severe cracking, component separation, or “blow out”.

• Page 75: Consumer Assistance

  CONSUMER ASSISTANCE CHRYSLER GROUP LLC WARNING! CUSTOMER CENTER Engine exhaust, some of its P.O. Box 21–8004 constituents, and certain vehicle components contain, or emit, Auburn Hills, MI 48321–8004 chemicals known to the State of Phone: 1–800–992–1997 California to cause cancer and birth defects, or other reproductive harm.

• Page 76: Reporting Safety Defects In The 50 United States And Washington, D.c

  Washington, D.C. 20590. You can regarding the limited tire warranty also obtain other information about coverage, contact your local motor vehicle safety from Chrysler dealer or your local http://www.safercar.gov. authorized tire dealer. If you cannot In Canada access the DVD and would like a paper copy of the limited warranty •…

• Page 77
  CONSUMER ASSISTANCE Disclaimer: WARNING! (Continued) • THE TIRE MANUFACTURER’S • Tires should be inspected LIMITED WARRANTY PROGRAM, THE regularly by a qualified technician DETAILS OF WHICH CAN BE FOUND, for signs of damage, such as ON THE OWNERS MANUAL DVD, THE punctures, impacts, underinflation TIRE MANUFACTURER’S WEBSITE or overloading.
• Page 78
  NOTE: All tire warranties are made by Tire Service Life the tire manufacturer. Tires are not • The service life of a tire is dependent covered under your Chrysler New upon varying factors including, but Vehicle Limited Warranty. not limited to, your driving style, tire…

• Page 79: Mopar Accessories

  • The following highlights just some of the authentic Chrysler Accessories by ® MOPAR that have been engineered to customize your Chrysler Town & Country. • To see the full line of accessories stop by your Chrysler dealer or visit MOPAR.com. EXTERIOR: • Side Window Air • Sunroof Air Deflector •…

• Page 80
  NOTES…
• Page 81
  NOTES…
• Page 82
  NOTES…
• Page 84
  This guide has been prepared to help you get quickly acquainted with your new Chrysler and to provide a convenient reference source for common questions. However, it is not a substitute for your Owner’s Manual. For complete operational instructions, maintenance procedures and important safety messages, please consult your Owner’s…