Руководство garmin striker 4

• Page 1
  STRIKER Series ™ Owner’s Manual…

• Page 2: Device Overview

  . You can customize the layout of the the sonar function properly. If the device automatically detected screens. your transducer, this option does not appear. This chartplotter is compatible with the Garmin ClearVü ™ Customizing the Home Screen transducer as well as a range of accessory transducers You can add items to and rearrange items on the Home screen.

• Page 3
  You can view numeric data on the home screen using the technology and transducers. Numbers screen. NOTE: To receive Garmin ClearVü scanning sonar, you need a Select Customize Home > Add > Numbers. compatible fishfinder and a compatible transducer. Garmin ClearVü high-frequency sonar provides a detailed…

• Page 4: Split-Screen Frequency

  Depth at your present location Depth scale Split-Zoom View SideVü Sonar View On the split-zoom page, you can see a full-view graph of sonar readings on the right side of the screen, and a magnified portion NOTE: Not all models support SideVü sonar and scanning of that graph on the left side of the screen.

• Page 5: Sonar Frequencies

  • To display medium-sensitivity sonar returns with moderate aspect ratio and appear less distorted. When viewing noise automatically, select Auto Med. Garmin ClearVü or SideVü sonar views, it is recommend • To display lower-sensitivity sonar returns with less noise to use the Auto setting.

• Page 6
  option provides a good balance between a quickly scrolling image and targets that are less distorted. Setting the Bottom Search Limit You can set a maximum depth at which the auto range feature searches for the bottom. A lower limit acquires data about the bottom faster than a higher limit.

• Page 7: Deleting All Waypoints

  You can measure the distance between two locations. Select Edit Route. From the waypoint map, begin panning (Panning on the STRIKER 4, page Select an option: Select > Measure Distance. • To change the name, select Name, and enter the name.

• Page 8: Device Configuration

  Software Information: Provides information about the device and the software version. Clearing the Track Garmin Devices: Provides information about connected Garmin devices. Select User Data > Track > Clear Track > OK. Factory Settings: Restores the device to factory settings.

• Page 9: Alarms Settings

  number to display water depth. Enter a 0 in this value to Deep Water: Sounds when the water depth is deeper than the display depth below keel and depth below transducer. specified depth. Water Temp.: Sounds when the water temperature varies more than ±…

• Page 10: Registering Your Device

  Help us better support you by completing our online registration Select Settings > Units. today. Select the correct map datum and position format settings. • Go to garmin. Create the waypoint again. • Keep the original sales receipt, or a photocopy, in a safe place. Specifications…

STRIKER

™

 Series

Owner’s Manual

December 2015

190-01950-00_0A