Стиральная машина kuppersberg wd 1488 инструкция

Скачать инструкция по эксплуатации в формате PDF

Узнавай о новинках и акциях первым

• Techno Pride. Бытовая техника

• Стиральные машины

• Kuppersberg

• Встраиваемая стиральная машина Kuppersberg WD 1488
• Инструкция для стиральной машины Kuppersberg WD 1488

TECHNICAL PASSPORT

ПАСПОРТ ТЕХНИЧЕСКОГО ИЗДЕЛИЯ

WD 1488

WASHING DRYER MACHINES

СТИРАЛЬНО-СУШИЛЬНЫЕ МАШИНЫ

2

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

1. GENERAL SAFETY RULES ……………………………………………………………………………………………………4

2. INSTALLATION ……………………………………………………………………………………………………………………….7

3. PRACTICAL TIPS …………………………………………………………………………………………………………………….12

4. MAINTENANCE AND CLEANING ……………………………………………………………………………………….13

5. QUICK USER GUIDE ……………………………………………………………………………………………………………… 14

6. CONTROLS AND PROGRAMS …………………………………………………………………………………………….. 14

7. DRYING CYCLE ………………………………………………………………………………………………………………………..23

8. AUTOMATIC WASHING/DRYING CYCLE …………………………………………………………………………. 25

7. THROUBLESHOOTING AND WARRANTY ………………………………………………………………………..26

CONTENTS

3

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

Carefully read this manual for

correct and safe appliance use and for

helpful tips on effi cient maintenance.

Only use the washing machine after

carefully reading these instructions.

We recommend you always keep this

manual on hand and in good condition

for any future owners.

Please check that the appliance is

delivered with this instruction manual,

warranty certifi cate, service centre

address and energy effi ciency label.

Also check that plugs, drain hose

support hook and liquid detergent or

bleach tray (only on some models) are

included. We recommend you keep all

these components.

FOR U.K. ONLY

On receipt of your appliance

please check it carefully for damage.

Any damage found must be reported

to the delivery driver immediately.

Alternatively damage found must be

reported to the retailer within 2 days of

receipt.

Each product is identifi ed by a unique

16character code, also called the “serial

number”, printed on the sticker. This

can be found inside the door opening.

This code is a unique code for your

product that you will need to register

the product warranty, or if you need to

contact the Customer Service Centre.

Environmental conditions

This appliance is marked according

to the European directive 2012/19/

EU on Waste Electrical and Electronic

Equipment (WEEE).

WEEE contains both polluting

substances (which can cause negative

consequences for the environment)

and basic components (which can be

re-used). It is important to have WEEE

subjected to specifi c treatments, in

order to remove and dispose properly

all pollutants, and recover and recycle

all materials. Individuals can play an

important role in ensuring that WEEE

does not become an environmental

issue; it is essential to follow some

basic rules:

 WEEE should not be treated as

household waste;

 WEEE should be handed over to

the relevant collection points managed

by the municipality or by registered

companies. In many countries, for large

WEEE, home collection could be present.

In many countries, when you buy

a new appliance, the old one may be

returned to the retailer who has to

collect it free of charge on a one-to-

one basis, as long as the equipment is

of equivalent type and has the same

functions as the supplied equipment.

4

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

1. GENERAL SAFETY RULES

 This appliances is intended

to be used in household and similar

applications such as:

 Staff kitchen areas in shops,

offi ces and other working environments;

 Farm houses;

 By clients in hotels, motels and

other residential type environments;

 Bed and breakfast type

environments. A different use of this

appliance from household environment

or from typical housekeeping functions,

as commercial use by expert or trained

users, is excluded even in the above

applications. If the appliance is used

in a manner inconsistent with this it

may reduce the life of the appliance

and may void the manufacturer’s

warranty. Any damage to the appliance

or other damage or loss arising

through use that is not consistent

with domestic or household use (even

if located in a domestic or household

environment) shall not be accepted by

the manufacturer to the fullest extent

permitted by law.

 This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or lack of

experience and knowledge if they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved.

Children shall not play with

the appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

 Children should be supervised to

ensure that they do not play with the

appliance.

 Children of less than 3 years

should be kept away unless continuously

supervised.

 If the supply cord is damaged,

it must be replaced by a special

cord or assembly available from the

manufacturer or its service agent.

 Only use the hose-sets supplied

with the appliance for the water supply

connection (do not reuse old hose-sets).

 Water pressure must be between

0.05 MPa and 0.8 MPa.

 Make sure carpets or rugs do

not obstruct the base or any of the

ventilation openings.

 The fi nal part of a washer dryer

cycle occurs without heat (cool down

cycle) to ensure that the items are left

at a temperature that ensures that the

items will not be damaged.

5

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

WARNING:

never stop a washer dryer before

the end of the drying cycle unless all

items are quickly removed and spread

out so that the heat is dissipated.

 After installation, the appliance

must be positioned so that the plug is

accessible.

 The appliance must not be

installed behind a lockable door, a

sliding door or a door with a hinge on

the opposite side to that of the washer

dryer, in such way that a full opening of

the washer dryer door is restricted.

 The maximum load capacity of

dry clothes depends on the model used

(see control panel).

 The appliance is not to be used

if industrial chemicals have been used

for cleaning.

 Do not dry unwashed items in

the washer dryer.

 Items that have been soiled with

substances such as cooking oil, acetone,

alcohol, petrol, kerosene, spot removers,

turpentine, waxes and wax removers

should be washed in hot water with an

extra amount of detergent before being

dried in the washer dryer.

 Items such as foam rubber (latex

foam), shower caps, waterproof textiles,

rubber backed articles and clothes or

pillows fi tted with foam rubber pads

should not be dried in the washer dryer.

 Fabric softeners, or similar

products, should be used as specifi ed by

the fabric softener instructions.

 Oil-affected items can ignite

spontaneously, especially when exposed

to heat sources such as a washer dryer.

The items become warm, causing an

oxidation reaction in the oil, Oxidation

creates heat. If the heat cannot escape,

items can become hot enough to catch

fi re. Piling, stacking or storing oil-

effected items can prevent heat from

escaping and so create a fi re hazard.

 If it is unavoidable that fabrics

contain vegetable or cooking oil or

have been contaminated by hair care

products be placed in a washer dryer

they should fi rst be washed in hot water

with extra detergent this will reduce,

but not eliminate, the hazard.

 Remove all objects from pockets

such as lighters and matches.

 To consult the product technical

specifi cation please refer to the

manufacturer website.

6

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

Electrical connections and

safety instructions

 The technical details (supply

voltage and power input) are indicated

on the product rating plate

 Make sure that the electrical

system is earthed, complies with all

applicable law and that the (electricity)

socket is compatible with the plug of

the appliance. Otherwise, seek qualifi ed

professional assistance.

 The use of converters, multiple

sockets or extension cords is strongly

advised against

WARNING:

the appliance must not be

supplied through an external

switching device, such as a timer, or

connected to a circuit that is regularly

switched on and off by a utility.

Before cleaning or maintaining the

washing machine, unplug the appliance

and turn off the water tap.

 Do not pull on the power cord or

appliance to unplug the machine.

 Make sure there is no water in

the drum before opening the door.

WARNING:

water may reach very high

temperatures during the wash cycle.

 Do not expose the washing

machine to rain, direct sunlight or other

weather elements. Protect from possible

freezing.

 When moving, do not lift the

washing machine by the knobs or

detergent drawer; during transport,

never rest the door on the trolley. We

recommend two people lift the washing

machine.

 In the event of fault and/or

malfunction, turn off the washing

machine, close the water tap and do not

tamper with the appliance. Immediately

contact the Customer Service Centre

and only use original spare parts.

Failure to observe these instruction

may jeopardise appliance safety.

7

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

2. INSTALLATION

 Remove the 2 or 4 transportation

screws (A) on the back and remove the

2 or 4 fl at washers, rubber bungs and

plastic spacer tubes (B) as illustrated in

fi gure 1.

 If the washing machine is built-

in, unscrew the 3 or 4 transportation

screws (A) and remove the 3 or 4 fl at

washers, rubber bungs and plastic

spacer tubes (B).

 During the removal of the screws

occasionally spacer tubes fall inside the

product, these can be remove by tilting

the product forward and recovering

them from the fl oor or inside the base

of the machine.

 Cover the open transportation

screw holes with the 2 or 4 plastic caps

included in the instruction bag.

WARNING:

keep packaging materials away

from children.

 Place the corrugated plastic

sheet, found on top of the appliance

during the unpacking process, into the

base of the appliance as shown in fi gure

2 (according to the model, consider

version A, B or C).

In some models this operation will not

be necessary, because the corrugated

plastic sheet will be already placed on

the bottom of the appliance.

8

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

Instructions for mounting the

furniture door

 Position the template onto

the reverse of the furniture door. It

is possible to mount the hinges and

closure magnet on the right or left-hand

side depending on your requirements.

Mark the screw hole positions, then drill

out these positions.

 Fix the hinges in place with the 4

screws provided (A).

 Fix the magnet (B) in place using

screw (C).

 Mount the plate (D) on the right

or left-hand side, depending on your

installation requirements. Place the

plastic support (E) under the plate and

fi x it in position with screw (F).

 Snap mount cap (G) in the lower

position.

9

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

 Mount the furniture door to the

front of the washer using the hinges.

Place the spacers under the hinges (I)

and then fi x in position with screw (H).

We suggest mounting the furniture

door so that it opens towards the left,

which is the same direction as the

porthole door. This will leave more

space when you are loading washing

into the appliance.

 Slide the washer into an opening

of the size indicated in the diagram

opposite. A furniture plinth may be run

across the front of the appliance, but

its height will be dictated by the height

the washer is set at.

 The 4 adjustable feet allow the

height of the washer to be adjusted

from 820 mm to a maximum of 840

mm. To adjust the height, you should

remove the nuts fi tted to each foot

and replace these with the 5 mm nuts

supplied. Raise the feet to your desired

height and then fully tighten the lock

nut to the base of the washer.

10

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

Hydraulic connections

 Connect the water hose to the

water supply tap (fi g. 3) only using the hose

supplied with the appliance (do not reuse

old hose-sets).

 SOME MODELS may include one or

more of the following features:

 HOT&COLD (fi g. 4):

water mains connection settings with

hot and cold water for higher energy

savings. Connect the grey tube to the cold

water tap % and the red one to the hot

water tap. The machine can be connected to

the cold water tap only: in this case, some

programs may start a few minutes later.

 AQUASTOP (fi g. 5):

a device located on the supply tube that

stops water fl ow if the tube deteriorates;

in this case, a red mark will appear in the

window “A” and the tube must be replaced.

To unscrew the nut, press the one-way lock

device «B».

 AQUAPROTECT SUPPLY TUBE WITH

GUARD (fi g. 6):

Should water leak from the primary

internal tube «A», the transparent

containment sheath «B» will contain water

to permit the washing cycle to complete. At

the end of the cycle, contact the Customer

Service Centre to replace the supply tube.

Setting

The washing machine should be

installed in its fi nal position such that the

water fi ll hose is not kinked or trapped.

The corrugated drain hose should be

inserted into suitable drain pipe of

between 50 cm and 85 cm height above

the fl oor using the curved drain hose

support. If an under sink connection is

used the drain hose must be routed above

the sink overfi ll opening to prevent back

siphoning. Care must be taken to avoid

kinking or trapping the drain hose (fi g. 7).

11

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

 Level the appliance using the

feet as illustrated in fi gure 8:

a. turn the nut clockwise to release

the screw;

b. rotate the foot to raise or lower it

until it touches to the fl oor;

c. lock the foot, screwing in the nut,

until it tightens against to the bottom

of the washing machine.

 Plug in the appliance.

WARNING:

contact the Customer Service

Centre should the power cord need

replacement.

Detergent drawer

The detergent draw is split into 3

compartments as illustrated in fi gure 9:

 compartment «1»: for prewash

detergent;

 compartment « »: for special

additives, softeners, starch fragrances, etc.;

WARNING:

only use liquid products;

the washing machine is set to

automatically dose additives at each

cycle during the last rinse.

 compartment «2»: for washing

detergent.

WARNING:

some detergents are not designed

for use in the dispenser drawer but

are supplied with their own dispenser

that is placed in the drum directly.

WARNING:

installation faults are not covered

by the manufacturers warranty.

12

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

3. PRACTICAL TIPS

Load tips

When sorting laundry, make

sure:

 have eliminated metallic

objects such as hair clips, pins, coins,

from laundry;

 to have buttoned pillow cases,

closed zips, tied loose belts and long

robe ribbons;

 to have removed rollers, hooks

or clips from curtains;

 to have carefully read clothing

washing labels;

 to have removed any persistent

stains using specifi c detergents.

 When washing rugs, bedcovers or

other heavy clothing, we recommend you

avoid the spinning cycle.

 To wash wool, make sure the item

can be machine washed. Check the fabric

label.

Helpful suggestions for the user

A guide environmentally friendly and

economic use of your appliance.

Maximise The Load Size

 Achieve the best use of energy,

water, detergent and time by using the

recommended maximum load size.

Save up to 50% energy by washing a

full load instead of 2 half loads.

Do you need to pre-wash?

 For heavily soiled laundry only!

SAVE detergent, time, water and

between 5 to 15% energy consumption

by NOT selecting Prewash for slight to

normally soiled laundry.

Is a hot wash required?

 Pretreat stains with stain remover

or soak dried in stains in water before

washing to reduce the necessity of a hot

wash programme. Save energy by using

a low temperature wash programme.

Before using a drying

programme (WASHER-DRYERS)

 SAVE energy and time by selecting

a high spin speed to reduce the water

content in laundry before using a drying

programme.

Following is a quick guide with tips

and recommendations on detergent

use at the various temperatures. In any

case, always read the instructions on the

detergent for correct use and doses.

When washing heavily soiled whites, we

recommend using cotton programs of 60°C

or above and a normal washing powder

(heavy duty) that contains bleaching

agents that at medium/high temperatures

provide excellent results.

For washes between 40°C and 60°C

the type of detergent used needs to be

appropriate for the type of fabric and level

of soiling. Normal powders are suitable

for “white” or colour fast fabrics with high

soiling, while liquid detergents or “colour

protecting” powders are suitable for

coloured fabrics with light levels of soiling.

For washing at temperatures below 40°C

we recommend the use of liquid detergents

or detergents specifi cally labeled as

suitable for low temperature washing.

For washing wool or silk, only use

detergents specifi cally formulated for

these fabrics.

13

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

MAINTENANCE

AND CLEANING

To clean the washing machine

exterior, use a damp cloth, avoiding

abrasives, alcohol and/or solvents. To

maintain a good wash performance we

recommend that the soap drawer and

pump fi lters are regularly cleaned. A

monthly service wash, using a proprietary

cleaner is also recommended.

Drawer cleaning

 We recommend you clean the

drawer to avoid accumulating detergent

and additive residue.

 To do this, extract the drawer

using slight force, clean it with running

water and reinsert it in its housing.

 Ensure the siphon cap is correctly

refi tted.

Filter cleaning

 The washing machine comes

with a special fi lter able to trap large

residue, such as buttons or coins, which

could clog the drain.

 Only available on certain models:

pull out the corrugated hose, remove

the stopper and drain the water into a

container.

 Ensure all the water has been

emptied from the drum.

 Before unscrewing the fi lter,

we recommend you place an absorbent

cloth under it to keep the fl oor dry. A

small amount of water will come out of

the fi lter as you remove it this is normal.

 Turn the fi lter counter-clockwise

to the limit stop.

 Remove and clean the fi lter;

when fi nished, replace it turning it

clockwise. The fi lter handle will be

locked when it is not possible to turn

any further and the handle is horizontal.

Smearing a small amount of liquid soap

on the fi lter seal will help refi tting.

 Repeat the previous steps in

reverse order to reassemble all parts.

Suggestions for moves or

prolonged disuse

 Should the washing machine be

stored in an unheated room for a long

period of time, drain all water from tubes.

 Unplug the washing machine.

 Detach the tube from the

drainage system and clip on the rear of

the machine and lower it, fully draining

water into a bowl.

 Secure the drain tube with the

drainage system and clip on the rear of

the machine when fi nished.

 Keep the door glass and gasket clean.

The manufacturers warranty only

covers faults within the product of a

mechanical or electrical nature. Faults

caused by handling, installation or miss

use are not covered and may incur a

charge for any repair visit to resolve.

14

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

5. QUICK USER GUIDE

This washing machine automatically

adjusts the level of the water to the

type and quantity of washing. This

system gives a reduction in energy

consumption and a saving in washing

times.

Program selection

 Turn on the washing machine

and select the required program.

 Adjust the washing temperature

if necessary and press the required

«option» buttons.

DRYING

If you would like the drying cycle to

begin automatically after washing,

select the programme required using

the DRYING SELECTION button. Or you

can fi nish the wash and then select the

drying programme and load size.

 Press the START/PAUSE button to

start washing.

 At the end of the programme,

the message «End» will appear on the

display or, on some models, all wash

stage indicator lights will turn on.

Wait until the DOOR LOCKED light has

gone out before opening the door.

 Turn off the washing machine.

For any type of wash, see the program

table and follow the operating sequence

as indicated.

Technical data

Water pressure:

min 0.05 Mpa / max 0.8 Mpa

(0.05 MPa dispenses approximately

1 litre of water in 10 seconds)

Spin r.p.m.: See rating plate.

Power input / Power current fuse

amp / Supply voltage: See rating plate.

6. CONTROLS AND PROGRAMS

A Programme selector with OFF

position

B START/PAUSE button

C DELAY START button

D OPTIONS button

E RAPID / STAIN LEVEL button

F TEMPERATURE SELECTION button

G SPIN SPEED button

F+G KEY LOCK

H Digital display

I OPTIONS indicator lights

L DOOR LOCKED indicator light

N KEY LOCK indicator light

O TEMPERATURE SELECTION

indicator lights

P SPIN SPEED indicator lights

15

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

PROGRAMME selector with OFF

position

When the programme selector is

turned the display lights up to show the

settings for the programme selected.

For energy saving, at the end of the

cycle or with an inactivity period, the

display level contrast will decrease.

N.B.: To switch the machine off, turn the

programme selector to the OFF position.

 Press the START/PAUSE button to

start the selected cycle.

 Once a programme is selected

the programme selector remains

stationary on the selected programme

till cycle ends.

 «End» will appear in the display

at the end of the program and the

DOOR LOCKED light will go off, it is now

possible to open the door.

 Switch off the washing machine

by turning the selector to OFF.

The programme selector must be

returned to the OFF position at the

end of each cycle or when starting a

subsequent wash cycle prior to the next

programme being selected and started.

START/PAUSE button

Close the door BEFORE selecting the

button START/PAUSE.

 Press to start the selected cycle.

When the START/PAUSE button has

been pressed, the appliance can take

few seconds before it starts working.

ADD OR REMOVE ITEMS

AFTER THE PROGRAMMES HAS

STARTED (PAUSE)

 Press and hold the START/PAUSE

button for about 2 seconds (some

indicator light and the time remaining

indicator will fl ash, showing that the

machine has been paused).

 Wait until the DOOR LOCKED

light has gone out before opening the

door.

Before you open the door, please check

water level is below the door opening

to avoid fl ooding.

 After you have added or removed

items, close the door and press the

START/PAUSE button (the programme

will start from where it left off).

CANCELLING THE PROGRAMME

 To cancel the programme, set the

selector to the OFF position.

 Wait 2 minutes until the safety

device unlocks the door.

DELAY START button

 This button allows you to pre-

programme the wash cycle to delay the

start of the cycle for up to 24 hours.

 To delay the start use the

following procedure:

 Select the required

programme.

 Press the delay start button

once to activate it (h00 appears on

the display) and then press it again to

set a 1 hour delay (h01 appears on the

display). The pre-set delay increases by

1 hour each time the button is pressed,

16

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

until h24 appears on the display, at

which point pressing the button again

will reset the delay start to zero.

 Confi rm by pressing the

START/PAUSE button. The delay

countdown will begin and when it

has fi nished the programme will start

automatically.

 It is possible to cancel the delay

start by turning the programme selector

to OFF.

If there is any break in the power supply

while the machine is operating, a special

memory stores the selected programme

and, when the power is restored, it

continues where it left OFF.

The option buttons should be selected

before pressing the START/PAUSE

button. If an option is selected that

is not compatible with the selected

programme then the option indicator

light fi rst fl ashes and then goes off.

OPTIONS button

This button allows you to choose

between three different options:

DRYING SELECTION button

 For automatic washing/drying

cycle: after the selection of washing

programme according to laundry type,

select a degree of dryness by pressing

this button. At the end of the washing

programme, the selected drying cycle

will start automatically.

If a washing programme is not

compatible with automatic drying

selected, this function will not be

activated.

If you exceed the maximum dryable load

of laundry indicated in the programme

table, the laundry may not be dried

satisfactory.

 If you want delete the selection

before the programme starts, please

press repeatedly the button until

the lights go off or reposition the

programme selector to the OFF position.

 Drying only cycle:

select via the knob the desired

drying programme in conjunction with

your fabrics, by pressing this button it

is possible to select a degree of dryness

that is different to the default one

(except for the wool drying programme).

 To cancel the cycle during the

drying phase, please press the button

for about 3 seconds.

WARNING:

After cancelling the drying

programme, the cool down phase

will begin and please wait for about

10/20 minutes before opening the

door.

 “End” will appear in the display

at the end of the program and the

DOOR LOCKED light will go off, it is now

possible to open the door.

It is also possible to cancel the drying

cycle by turning the programme selector

to the OFF position. It is necessary to

wait for the cooling phase’s end (10/20

17

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

minutes) and the DOOR LOCKED light to

go off before opening the door.

RAPID / STAIN LEVEL button

This button allows you to choose

between two different options,

depending on the selected programme.

RAPID

The button becomes active when

you select the RAPID (14/30/44 Min.)

programme on the knob and allows

you to select one of three durations

indicated.

STAIN LEVEL button

 Once the programme has been

selected the wash time set for that

programme will be automatically

shown.

 This option allows you to choose

between 3 levels of wash intensity

modifying the length of the programme,

depending on how much the fabrics

are soiled (can only be used on some

programmes as shown in the table of

programmes).

TEMPERATURE SELECTION

button

 This button allows you to change

the temperature of the wash cycles.

 It is not possible to raise the

temperature over the maximum allowed

for the programme, in order to protect

the fabrics.

 If you want carry out a cold wash

all the indicators must be off.

SPIN SPEED button

 By pressing this button, it is

possible to reduce the maximum speed,

and if you wish, the spin cycle can be

cancelled.

 If the label does not indicate

specifi c information, it is possible to

use the maximum spin expected in the

program.

To prevent damage to the fabrics, it

is not possible to increase the speed

over the maximum allowed for the

programme.

 To reactivate the spin cycle press

the button until you reach the spin

speed you would like to set.

 It is possible to modify the spin

speed without pausing the machine.

An over dosing of detergent can cause

excessive foaming. If the appliance

detects the presence of excessive foam,

it may exclude the spinning phase or

extend the duration of the program and

increase water consumption.

The machine is fi tted with a special

electronic device, which prevents

the spin cycle should the load be

unbalanced. This reduces the noise

and vibration in the machine and so

prolongs the life of your machine.

KEY LOCK

 Pressing simultaneously the

buttons TEMPERATURE SELECTION

and SPIN SPEED for about 3 seconds,

the machine allows you to lock the

18

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

keys. In this way, you can avoid making

accidental or unwanted changes if

a button on the display is pressed

accidently during a cycle.

 The key lock can be simply

cancelled by pressing the two buttons

simultaneously again or turning off the

appliance.

Digital Display

The display’s indicator system allows

you to be constantly informed about the

status of the machine.

1) DRYING SELECTION

INDICATOR LIGHTS

The indicators display the degrees

of dryness that can be selected by the

relevant button:

EXTRA DRY

(suitable for towels, bathrobes and

bulky loads).

IRON DRY

(that leaves the laundry ready for

ironing).

CUPBOARD DRY

(for items that will be put away

without ironing).

2) CYCLE DURATION

 When a programme is selected

the display automatically shows

the cycle duration, which can vary,

depending on the options selected.

 During the initial fi lling phase

of the cycle the machine calculates the

actual cycle time needed based on the

load size, content and options selected.

The real time of the wash will then be

displayed. This time can recaulculate

during the wash depending on

detergent levels and load balancing.

3) DOOR LOCKED INDICATOR

LIGHT

The indicator light is illuminated

when the door is fully closed.

Close the door BEFORE selecting the

START/PAUSE button.

 When START/PAUSE is pressed

on the machine with the door closed,

the indicator will fl ash momentarily and

then illuminate.

If the door is not properly closed, the

light will continue to fl ash for about 7

seconds, after which the start command

will be automatically cancelled. In this

case, close the door in the proper way

and press the START/PAUSE button.

 Wait until the DOOR LOCKED

light has gone out before opening the

door.

4) Kg LOAD INDICATOR LIGHT (function

active only on Cotton and Synthetics

programmes)

19

ENGLISH TECHNICAL PASSPORT

Washing Dryer Machines

 During the fi rst minutes of the

cycle, the «Kg LOAD» indicator will

remain on while the intelligent sensor

will weigh the laundry and adjust

the cycle time, water and electricity

consumption accordingly.

 Through every wash phase «Kg

LOAD» allows to monitor information

on the wash load in the drum and in the

fi rst minutes of the wash it:

 adjusts the amount of water

required;

 determines the length of the

wash cycle;

 controls rinsing according to

the type of fabric selected to be washed

it;

 adjusts the rhythm of drum

rotation for the type of fabric being

washed;

 recognises the presence of

too much soap suds, and if necessary,

adjust the amount of rinse water.

 adjusts the spin speed

according to the load, thus avoiding any

imbalance.

5) KEY LOCK INDICATOR LIGHT

The indicator light show that the

keys are locked.

6) WASH TEMPERATURE

INDICATOR LIGHTS

This show the washing temperature

of the selected programme that can

be changed (where allowed) by the

relevant button.

If you want carry out a cold wash all

the indicators must be off.

7) SPIN SPEED INDICATOR

LIGHTS

This show the spin speed of the

selected programme, you can reduce or

omit by the relevant button.

20

TECHNICAL PASSPORT ENGLISH

Washing Dryer Machines

Table of programmes

PROGRAMME

(see control panel)

1)

(MAX.)

6+4

kg

6+6

kg

7+5

kg

8+5

kg

8+6

kg

9+6

kg

2

1

Whites

2)

4)

6 6 7 8 8 9 90° • •

Cotton +

2)

Prewash 4)

6 6 7 8 8 9 60° • • •

** 2)

Cotton 4)

6 6 7 8 8 9 60° • •

Eco 20° 6 6 7 8 8 9 20° • •

Mixed

2)

4)

3 3 3,5 4 4 4,5 60° • •

Delicates 2 2 2,5 2,5 2,5 2,5 40° • •

Rinse — — — — — — — •

Spin — — — — — — —

Drain — — — — — — —

14′

Rapid

3) 4)

30’

14’-30’-44’

44′

1 1 1 1,5 1,5 1,5 30° • •

2 2 2,5 2,5 2,5 2,5 30° • •

3 3 3,5 3,5 3,5 3,5 40° • •

Shirts 4) 3 3 3,5 4 4 4,5 30° • •

Wool 1 1 1 2 2 2 40° • •

Handwash 1 1 1 2 2 2 30° • •

Low heat 3 3 3,5 4 4 4,5 —

High heat 4 5 5 5 6 6 —