Tl wa854re инструкция на русском как настроить

Для написания данной инструкции мы выбрали Wi-Fi-усилитель сигнала (репитер) TP-LINK TL-WA854RE.
Выглядит он так:

Вставляем репитер в розетку. В списке беспроводных сетей находим сеть с именем:
TP-LINK Extender_XXXXXX (X — цифры и буквы, в каждой модели разные)
Подключаемся к этой сети.

В адресной строке браузера набираем адрес: 192.168.0.254 и жмём Enter.
Появится окно входа. Чтобы войти в настройки репитера вводим
Имя пользователя: admin
Пароль: admin

Появится окно начала настройки. Жмём «Далее«.

Выбираем регион «Россия» и жмём «Далее»

Дальше репитер начнёт искать доступные беспроводные сети:

В списке Wi-Fi сетей находим свою сеть. Ставим напротив галочку и жмём «Далее»

В этом окне вводим пароль вашей Wi-Fi сети, ставим галочку «Копировать с главного маршрутизатора» и жмём «Далее»

Жмём «Завершить»

Принцип работы репитера

• Инструкции по эксплуатации
  
  1
  

На NoDevice можно скачать инструкцию по эксплуатации для TP-LINK TL-WA854RE. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации TP-LINK TL-WA854RE. Инструкции по использованию помогут правильно настроить TP-LINK TL-WA854RE, исправить ошибки и выявить неполадки.

• Page 1
  TL-WA854RE 300Mbps Universal Wi-Fi Range Extender REV1.2.1 1910011177…
• Page 2
  Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

• Page 3: Fcc Statement

  FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

• Page 4: Industry Canada Statement

  CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired…

• Page 5: Safety Information

  ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。 ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 ●請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information When product has power button, the power button is one of the way to shut off the product; …

• Page 6: Declaration Of Conformity

  TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 300Mbps Universal Wi-Fi Range Extender Model No.: TL-WA854RE Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:…

• Page 7: Table Of Contents

  CONTENTS Package Contents ………………..1 Chapter 1 Introduction ………………. 2 Product Overview ……………….. 2 Main Features ………………..2 Appearance ………………… 2 Chapter 2 Hardware Installation …………….4 Before You Begin ……………….. 4 Basic Requirements ………………5 Connecting the Device ………………5 Chapter 3 Quick Installation Guide ……………

• Page 8: Package Contents

  Conventions The Range Extender, the Device or TL-WA854RE mentioned in this User guide stands for TL-WA854RE 300Mbps Universal Wi-Fi Range Extender without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.

• Page 9: Chapter 1 Introduction

  Even though you may not be familiar with the Range Extender, you can easily configure it with the help of this Guide. Before installing the Range Extender, please look through this Guide to get the full information of the TL-WA854RE 300Mbps Universal Wi-Fi Range Extender.

• Page 10
  WPS or QSS button and then press the RANGE EXTENDER button to establish a secure connection between the Wireless router (or AP) and the Range Extender TL-WA854RE. RESET: This button is used to restore the Range Extender’s factory default settings.

• Page 11: Chapter 2 Hardware Installation

  RF (radio frequency) noise in your home or office. In order to optimize the performance of TL-WA854RE, please follow the instructions below to achieve an ideal location (please make sure it is always within the wireless coverage of the wireless router).

• Page 12: Basic Requirements

  To establish a typical connection of the Range Extender, please take the following steps: 1. Connect the Cable/DSL modem to a Wireless router with an Ethernet cable. 2. Plug your TL-WA854RE directly to a standard electrical wall socket, which is next to the Wireless router.

• Page 13: Chapter 3 Quick Installation Guide

  TL-WA854RE 300Mbps Universal Wi-Fi Range Extender easily with a Web-based utility. With a Web-based utility, it is easy to configure and manage the TL-WA854RE 300Mbps Universal Wi-Fi Range Extender. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.

• Page 14
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide After successful login, there will pop up the Quick Setup Start page. Click Next to get the quick setup started. Figure 3-3 Quick Setup Start  Note: If you are not to go through the Quick Setup right away, you can click Exit and enter the main menu of the device.
• Page 15
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide A list of available wireless network will appear. Check the box before the SSID of your desired network, and then click Next. Figure 3-6 Quick Setup – Available Wireless Networks  Note: If you could not find your wireless network name (SSID) in the list, you can click Rescan to redetect it or tick the checkbox before «Set SSID and MAC Manually»…
• Page 16
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Double-check your wireless setting and network setting, when Figure 3-8 appears. If verified, click Finish to complete the Quick Setup. If there is anything wrong, click Back to return the previous pages and reconfigure it.

• Page 17: Chapter 4 Configure The Device

  300Mbps Universal WiFi Range Extender User Guide Chapter 4 Configure the Device This Chapter describes how to configure your Range Extender via the web-based management page. The TL-WA854RE 300Mbps Universal Wi-Fi Range Extender is easy to configure and manage with the Web-based (Internet Explorer, Netscape ®…

• Page 18: Quick Setup

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Wireless Connection – It shows whether the Range Extender is connected to the Main  Router/AP by Wireless. IP Address –The IP address of the Range Extender.  Type – The Range Extender’s IP address Type.

• Page 19
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Security Type — the security type of your root device.  Modify — You can Edit or Delete the profiles.  Click Connect to connect the range extender to the wireless network that you have chosen in the profile list.

• Page 20: Network

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Click Edit to further edit the profile(s), or Delete to delete the profile(s). Click Connect to connect the range extender to the wireless network that you have chosen in the profile list.

• Page 21: Dhcp Settings

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide MAC Address — The physical address of the LAN port, as seen from the LAN. The value  cannot be changed. Type — Several IP types are supported, including: (1) Dynamic IP; (2) Static IP, and they are …

• Page 22
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Figure 4-8 DHCP Settings – Auto Figure 4-9 DHCP Settings – On Figure 4-10 DHCP Settings – Off DHCP Server — Selecting the radio button before Auto/On/Off will disable/enable the DHCP …

• Page 23: Dhcp Client List

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Address Lease Time — Enter the amount of time for the PC to connect to the Range Extender  with its current assigned dynamic IP address. The time is measured in minutes. After the time is up, the PC will be automatically assigned a new dynamic IP address.

• Page 24: Wireless Settings

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide wireless local area network just through a few settings. Wireless Settings is used for the configuration of some basic parameters of the Range Extender. Wireless Security provides three different security types to secure your data and thus provide greater security for your wireless network.

• Page 25: Wireless Security

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Operation Mode — Two Operation Modes are supported in most of regions, including  Universal Mode and WDS Mode. And some regions also support Proxy Mode. Universal Mode — The range extender is compatible with most routers and access points …

• Page 26
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Figure 4-14 Wireless Security Operation Mode — Shows the current operation mode.  Disable Security — Check this box radio button to disable wireless security. If disabled, the  wireless stations will be able to connect this device without encryption. It is strongly recommended that you choose one of the security types to enable security.

• Page 27: Wireless Mac Filtering

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide WEP Key Format — You can select ASCII or Hexadecimal format. ASCII format stands • for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.

• Page 28
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Wireless MAC Filtering — Click the Enable button to trigger the Wireless MAC Address  Filtering function. The default setting is disabled. To Add a Wireless MAC Address filtering entry, click the Add New… button. The “Add or Modify Wireless MAC Address Filtering entry»…

• Page 29: Wireless Advanced

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous page. For example: If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE is…

• Page 30: Wireless Statistics

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Beacon Interval — Specifies a value between 40-1000 milliseconds. The beacons are the  packets sent by the device to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100.

• Page 31: Throughput Monitor

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

• Page 32: Firmware Upgrade

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide secure one because it controls access to the device’s web-based management page. Besides, you can find out what happened to the system in System Log. There are six submenus under the System Tools menu (shown as Figure 4-20): Firmware Upgrade, Factory Defaults, Backup &…

• Page 33: Factory Defaults

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Enter the path name or click Browse… to select the downloaded file on the computer into the File blank. Click Upgrade.  Note: Do not turn off the device or press the Reset button while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.

• Page 34: Reboot

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Click Restore to update the configuration with the file whose path is the one you have input or • selected in the blank.  Note: The current configuration will be covered with the uploading configuration file. Wrong process will lead this device unmanaged.

• Page 35: Password

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide 4.6.5 Password Selecting System Tools > Password allows you to change the factory default user name and password of the device on the screen shown in Figure 4-25. Figure 4-25 Password It is strongly recommended that you change the factory default user name and password of the device.

• Page 36
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Log Type — By selecting the log type, only logs of this type will be shown.  Log Level — By selecting the log level, only logs of this level will be shown.

• Page 37: Appendix A: Factory Defaults

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Appendix A: Factory Defaults Item Default Value Common Default Settings Username admin Password admin IP Address 192.168.0.254 Subnet Mask 255.255.255.0 Domain http://tplinkrepeater.net Wireless SSID TP-LINK_Extender_XXXXXX Wireless Security Disabled Wireless MAC Address Filtering Disabled …

• Page 38: Appendix B: Troubleshooting

  There are TWO methods available to restore the factory defaults. Method 1: With the Range Extender TL-WA854RE powered on, use a pin to press and hold the RESET button on the rear panel for more than 2 seconds before releasing it.

• Page 39
  An easy way is to compare the signal strength of your target wireless network (symbolized by its SSID), with TL-WA854RE in operation vs. out of operation. Before comparison, you’d better make sure your computer can obtain an IP address from your target wireless network and thus access the Internet, either via TL-WA854RE or without.

• Page 40: Appendix C: Specifications

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Appendix C: Specifications General Standards and Protocols IEEE 802.3, 802.3u, 802.11n, 802.11b and 802.11g, TCP/IP, DHCP Safety & Emission Ports One 10/100M Auto-Negotiation LAN RJ45 port Wireless Frequency Band 2.4~2.4835GHz 11n：up to 300Mbps（Automatic）…

• Page 41: Appendix D: Glossary

  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide Appendix D: Glossary 802.11b — The 802.11b standard specifies a wireless networking at 11 Mbps using  direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks.

• Page 42
  TL-WA854RE 300Mbps Universal WiFi Range Extender User Guide WPA (Wi-Fi Protected Access) — WPA is a security technology for wireless networks that  improves on the authentication and encryption features of WEP (Wired Equivalent Privacy). In fact, WPA was developed by the networking industry in response to the shortcomings of WEP.