Валидатор new8210 руководство по эксплуатации

NEW 8210

Mobile payment terminal

PRODUCT MANUAL

NEW POS TECHNOLOGY LIMITED

For you safety

Use only approved power supply for NEW8210, using other power supply may

damage the device.

How to use rechargeable Li-ion battery properly.

*

Use only approved rechargeable battery.

*

Do not dispose of battery in fire or water.

*

Do not expose battery to temperature above 60℃, Store it in the environment

between -20 ℃ and 60 ℃.

*

Charge with a charger designated for the device.

*

Keep the contact surface of battery away from metal to avoid battery short.

*

Recycle or dispose of expired battery properly complying with local environment

requirement.

Do not use ethanol and other corrosive liquid to clear the device.

Contents Checklist

The following items should be found inside the box:

1 NEW8210 EFT-POS

1PCS

2 AC Power Supply

1PCS

3 AC Power Cable

1PCS

4 Li-ion Battery

1PCS

5 Thermal paper roll

1PCS

6 Product Manual

1PCS

7 Telephone Cable

1PCS (Optional)

8 Ethernet Cable

1PCS (Optional)

9 Stylus cable

1PCS (Optional)

NEW8210

NEW POS Technology limited

Product manual

• 1, Contents Checklist 1 NEW8210 EFT-POS 2 AC Power Supply 3 AC Power Cable 4 Li-ion Battery 5 Thermal paper roll 6 Product Manual 7 Telephone Cable 8 Ethernet Cable 9 Stylus cable The following items should be found inside the box: For you safety Use only approved power supply for NEW8210, …

• 2, USB Port Interface Figure Parts function description Paper holder lid: Holding thermal paper roll ( Φ38X57mm) Handle: LCD display: Antenna inductive zone: Key pad: User smart card slot: Magnetic stripe card reader : …

• 3, 3. Install the SIM/UIM card * Remove the back cover of device; * Insert the card into the SIM/UIM card slot . 4. Remove the SIM/UIM card * Remove the back cover of device; * Draw the SIM/UIM card out the slot. 4 Note Make sure that the device is in power off status when installing or removing SIM/UIM card. If the battery …

• 4, How to tear off paper How to swipe card 9. Swiping a Magnetic Stripe Card * During card swiping, the magnetic stripe should be downward and face the LCD of terminal, swipe it through the slot located on the right side of the terminal bidirectionally; * Swipe the card at steady speed. 6 Note During swiping, keep the lower edge of the magnetic str…

• 5, 8 Environment Working Environment: Temperature: 0 ~ 50 ( 32 ~ 122 ). Humidity: 10% ~ 90% (non-condense). Storage Environment: Temperature: -20 ~ 60 ( -4 ~140 ). Humidity: 5% ~ 95% (non-condense). ℃ ℃ �…

• 6, NEW8210 Product manual NEW POS Technology limited NEW POS TECHNOLOGY LIMITED Address: 14/A,Financial Technology Building,Science & Technology Park,No.11,Keyuan Rd,Nanshan District,ShenZhen,China Tel: +86-4006-520589 Fax: +86-755-82790632 E-mail: [email protected] Postalcode: …

• Quick Start Guide iCT200 Series Set up the terminal in a convenient location. Plug the Power Supply Unit into a mains socket and plug the Power Connector into the power socket on the ‘Magic Cable’ connector unit. Plug the telephone lead into the BT socket and the IN socket on the ‘Magic Cable’ connector unit. To connect the Ethernet (Broadband) socket you will need a ro …

  iCT 200 Series 2

• One Blue Hill Plaza, 16th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Verifone VX 805 with First Data Rapid Connect Host through DataCap This document provides step-by-step instructions on installing the Verifone VX 805, configuring settings, and processing transactions in CRE/RPE using F …

  VX 805 57

• We’re here to help.Call us at 1-888-900-9192Email us at [email protected] Size• 2 1/4 x 1 7/8 inch thermal paper• Verifone Vx520 with Vx820 PIN PadNote: Always select SOFTPAY-GLOBAL if you terminal displays the following:MM/DD/YY HH: MMSOFTPAY-GLOBALReports1. Press Reports button (4th purple button from left)2. Select the type of report you wish to print3. Terminal will print …

  Verifone Vx520 2

• ICT220/ ICT250/ IWL220 Download. *For IWL220 Terminals; to avoid the Terminals from running out of battery during downloads; it is recommended that the Terminal is placed on the charging/communication base when performing downloads. The procedure described below should be performed either at the beginning of the day before a transaction is performed, or at the end of the …

  iCT220 2

• 030104 QRG- © 2004 First Data Merchant Servicessm Corporation. All rights reserved. All trademarks and service marks referenced in this material are the property of their respective owners. NOTE: SOME PROMPTS MAY VARY BASE ON THE TERMINAL SETUP FINE DINING SALE (Swipe or Manually Keyed) Use this function to authorize and capture transactions for settlement. If the magnetic stripe …

  nashville linkpoint 3000/aio 2

• CANADATMSale1. Swipe, enter or insert the card of the client.Note: If you are presented with a card with chip on it, insert the card into the terminal`s chip reader, with the chip facing up. Leave the card in the reader until the transaction is completed.2. Enter the transaction amount and press ENTER.3. [if applicable] Enter the TIP amount and press the ENTER key.4. Confirm th …

  Optimum T4200 Series 2

• V1 6.4.19 88 W Plumeria Dr. | San Jose, CA 95134 | www.verifone.com 1 Frequently Asked Questions: Incident 525 Table of Contents 1. What is Incident 525? 2. How do I know if I am affected? 3. Which devices are affected? 4. Where do I go for help? 5. Support Portals and Login Details 6. How do I know who my processor is? 7. The direct …

  Incident 525 6

• www.tsys.com©2020 Global Payments, Inc. All trademarks and service marks contained herein are the sole and exclusive property of their respective owners. Any such use of those marks without the express written permission of their owner is strictly prohibited. qrg_ingenico_deskmove_teliumtetra_042120QUICK REFERENCE GUIDEIngenicoDesk/Move (Telium TETRA) BATCHESBatches shoul …

  Ingenico Desk 3500 2

• 3. Install the SIM/UIM card * Remove the back cover of device; * Insert the card into the SIM/UIM card slot . 4. Remove the SIM/UIM card * Remove the back cover of device; * Draw the SIM/UIM card out the slot. 4 Note Make sure that the device is in power off status when installing or removing SIM/UIM card. If the battery is in the holder, Remove the battery in advance. NEW8210 Product manual NEW POS Technology limited 5. Switch the device on * Press

• USB Port Interface Figure Parts function description Paper holder lid: Holding thermal paper roll ( Φ38X57mm) Handle: LCD display: Antenna inductive zone: Key pad: User smart card slot: Magnetic stripe card reader : Rubber pad: Tag label: Barcode Label: Band Label: Back cover: Power port: LED indicator: RS-232 port:

• 8 Environment Working Environment: Temperature: 0 ~ 50 ( 32 ~ 122 ). Humidity: 10% ~ 90% (non-condense). Storage Environment: Temperature: -20 ~ 60 ( -4 ~140 ). Humidity: 5% ~ 95% (non-condense). ℃ ℃ ℉ ℉ ℃ ℃ ℉ ℉ Technical Specifications NEW8210 Product manual NEW POS Technology limited Processor: Memory: Display： Keypad�

• Contents Checklist 1 NEW8210 EFT-POS 2 AC Power Supply 3 AC Power Cable 4 Li-ion Battery 5 Thermal paper roll 6 Product Manual 7 Telephone Cable 8 Ethernet Cable 9 Stylus cable The following items should be found inside the box: For you safety Use only approved power supply for NEW8210, using other power supply may damage the device. How to use rechargeable Li-ion battery properly. Use only approved rec

• NEW8210 Product manual NEW POS Technology limited NEW POS TECHNOLOGY LIMITED Address: 14/A,Financial Technology Building,Science & Technology Park,No.11,Keyuan Rd,Nanshan District,ShenZhen,China Tel: +86-4006-520589 Fax: +86-755-82790632 E-mail: [email protected] Postalcode: 518057 WebSite: www.newpostech.com 1. Warranty valid for 12 months after purchasing date. 2. This warranty will be voided if the product is da

Contents Checklist

1 NEW8210 EFT-POS

2 AC Power Supply

3 AC Power Cable

4 Li-ion Battery

5 Thermal paper roll

6 Product Manual

7 Telephone Cable

8 Ethernet Cable

9 Stylus cable

The following items should be found inside the box:

For you safety

Use only approved power supply for NEW8210, using other power supply may

damage the device.

How to use rechargeable Li—ion battery properly.

Use only approved rechargeable battery.

Do not dispose of battery in fire or water.

Do not expose battery to temperature above 60℃, Store it in the environment

between —20 ℃ and 60 ℃.

Charge with a charger designated for the device.

Keep the contact surface of battery away from metal to avoid battery short.

Recycle or dispose of expired battery properly complying with local environment

requirement.

*

*

*

*

*

*

Do not use ethanol and other corrosive liquid to clear the device.

NEW POS Technology limited

NEW8210

Product manual

1PCS

1PCS

(Optional)

1PCS (Optional)

1PCS (Optional)

1PCS

1PCS

1PCS

1PCS

1PCS

NEW 8210

Mobile payment terminal

PRODUCT MANUAL

NEW POS TECHNOLOGY LIMITED