Vitotronic 100 gc1 инструкция по сервисному обслуживанию

Quick Links

Operating Instructions

and User’s Information Manual

Vitocontrol-S, VD2/CT3/CM2, Model 300-K, MW1

Outdoor-reset logic digital cascade control

VITOCONTROL-S, VD2/CT3/CM2

Certified as a component part

of Viessmann boilers only

5351 341 v1.2 05/2012

• Page 1
  Operating Instructions and User’s Information Manual Vitocontrol-S, VD2/CT3/CM2, Model 300-K, MW1 Outdoor-reset logic digital cascade control VITOCONTROL-S, VD2/CT3/CM2 Certified as a component part of Viessmann boilers only 5351 341 v1.2 05/2012…

• Page 2: Introductory Information

  The main controls The settings required for operating your heating system are made on the Vitotronic 100, GC1 of each boiler and on the Vitocontrol-S, VD2/CT3/CM2. If you system is equipped with remote controls, you can also use the remote…

• Page 3: Useful Tips

  …………. Settings Changing the boiler water temperature (Vitotronic 100, GC1) ..

• Page 4
  Introductory information For your safety Please ensure that this manual is read and understood before commencing installation. Failure to comply with the issues listed below and details printed in this manual can cause product/property damage, severe personal injury, and/or loss of life.

• Page 5: Important Precautions

  Literature applicable to all aspects of site and advise the system operator/ the Vitocontrol S, VD2/CT3/CM2: ultimate owner where the literature — Technical Data Manual can be found. Contact Viessmann for — Installation Instructions additional copies. — Service Instructions — Operating Instructions…

• Page 6: Ready For Operation

  Ready for operation Overview of controls and indicators Vitotronic 100, GC1 Manual override Changing the boiler water temperature (without function in multi-boiler system) Changing the domestic hot water temperature (without function in multi- boiler system) (see pg.21) Value selector buttons…

• Page 7
  Ready for operation Overview of controls and indicators Vitocontrol-S, VD2/CT3/CM2 Emissions test switch (see pg. 34) Heating circuit selector buttons (pg.8) Display window (pg.8) Normal room temperature (pg. 11) Heating programs (pg. 10) Boiler sequence 1-23-4 Control on/off switch (pg. 14) Fuse F1 Energy saving mode (pg.
• Page 8
  Ready for operation Overview of controls and indicators Vitocontrol-S, VD2/CT3/CM2 (continued) Adjustment of the display window Other display symbols (These are not displayed contrast Open the hinged cover on the continuously, but appear according programming unit, and press and, to system type and operating status) at the same time, adjust the contrast with the button.
• Page 9
  The control units are preset in the factory to a standard operating mode. The heating system, therefore, is ready for operation. You can change the factory settings to suit your individual preferences. Vitotronic 100, GC1 Heating Program The heating program is set for “Central heating and domestic hot…

• Page 10: Selecting The Heating Program (Winter, Summer)

  Ready for operation Selecting the heating program (winter, summer) Vitotronic 100, GC1 Select the required heating program When pressed, the corresponding with the button. button is illumintaed Central heating and domestic hot water The boiler is available to the heating…

• Page 11
  Ready for operation Selecting the heating program (winter, summer) Vitocontrol-S, VD2/CT3/CM2 In the ”Central heating and domestic hot water” heating program, central heating takes place with alternating ”normal room temperature” and ”reduced room temperature” according to the selected time program. You can set the required room temperature as follows: To change the ”normal room temperature”…

• Page 12: Setting The Party Mode

  Ready for operation Setting the party mode Vitocontrol-S, VD2/CT3/CM2 Switch on the party mode when you require central heating and domestic hot water (if a DHW tank is installed) for a short time independently of the preset heating and time program. To activate the party mode 1.

• Page 13: Activating The Energy Saving Mode

  Ready for operation Activating the energy saving mode Vitocontrol-S, VD2/CT3/CM2 The energy saving mode is only possible in the ”rw“ heating program. Switch on the energy saving mode when you require particularly economic central heating for a short time. In the energy saving mode the preset room temperature is automatically lowered.

• Page 14: Switching On And Off

  If you want to switch off only one boiler in the heating system, select standby operation on the corresponding Vitotronic 100, GC1. If you do not want to use your heating system for a long period (several months), you should shut down the system.

• Page 15: Changing The Boiler Water Temperature

  In a multi-boiler system with the Vitocontrol-S, VD2/CT3/CM2, the boiler water temperature is determined by the Vitocontrol-S, VD2/CT3/CM2 for all boiler control units. It is not possible to make the setting on the Vitotronic 100, GC1. Selecting the time programs Vitocontrol-S, VD2/CT3/CM2 You can select time programs for central heating, domestic hot water (if a DHW tank is installed) and the DHW re-circulation pump (if installed).

• Page 16
  Settings Selecting the time programs Vitocontrol-S, VD2/CT3/CM2 (continued) Changing and scanning the time program for central heating 11. Open the hinged cover on the pro- gramming unit. 12. Press the heating circuit selector button; the button is illuminated. Press ; the ”Central hea- If you wish to exit the time ting time program”…
• Page 17
  Settings Selecting the time programs Vitocontrol-S, VD2/CT3/CM2 (continued) Changing and scanning the time program for central heating (continued) To exit the setting mode at any time Press ; the display chan- ges to ”Exit? Yes”. Press to confirm; the dis- play changes and shows the boiler temperature.
• Page 18
  Settings Selecting the time programs Vitocontrol-S, VD2/CT3/CM2 (continued) Changing and scanning the time program for domestic hot water heating and the DHW re-circulation pump The automatic mode is selected in the time program for domestic hot water and the DHW re-circulation pump, i.e. domestic hot water heating takes place in parallel with the central heating time program, but starts 30 minutes earlier.
• Page 19
  Settings Selecting the time programs Vitocontrol-S, VD2/CT3/CM2 (continued) Changing and scanning the time program for domestic hot water heating and the DHW re-circulation pump (continued) Press until one of Please note: the following displays ap- If different time phases are set for pears in the display win- individual days of the week and Time prog.
• Page 20
  Settings Selecting the time programs Vitocontrol-S, VD2/CT3/CM2 (continued) Changing and scanning the time program for domestic hot water heating and the DHW re-circulation pump (continued) To scan the time phases Follow the procedure described on page 15 and 16, but without using the buttons.

• Page 21: Changing The Domestic Hot Water Temperature

  Changing the domestic hot water temperature Vitocontrol-S, VD2/CT3/CM2 In a multi-boiler system the Vitotronic 100, GC1 is without function. The domestic hot water temperature is set on the Vitocontrol-S, VD2/CT3/CM2. 1. Open the hinged cover on the Desired DHW temp.
• Page 22
  Settings Setting the energy saving mode for the holiday period Vitocontrol-S, VD2/CT3/CM2 (continued) 1. Open the cover on the programming unit. 2. Press the heating circuit selector button; the button is illuminated. Press ; the ”Holiday pro- If you want to erase the holiday Departure date gram”…

• Page 23: Resetting The Date And Time

  Settings Resetting the date and time Vitocontrol-S, VD2/CT3/CM2 The time and date are preset in the factory and can be changed manually. There is no need for manual resetting in conjunction with a radio clock receiver (accessory). 1. Open the hinged cover on the pro- gramming unit.

• Page 24
  Settings Boiler sequence selection control Vitocontrol-S, VD2/CT3/CM2 Actual boiler sequence Boiler sequence The digits shown in the basic display show the boiler numbers of the connected boilers in the current actual boiler sequence. The hyphens between the boiler numbers indicate the status of each boiler. 1-23-4 The boilers in front of the first hyphen are those which are activated by the Vitocontrol-S, VD2/CT3/CM2.
• Page 25
  Settings Changing the heating pattern Vitocontrol-S, VD2/CT3/CM2 The heating pattern of the boiler is influenced by the outdoor temperature and the settings of the ”shift” and ”slope” of the ”heating curve”. Heating curves represent the relationship between the outdoor temperature and the boiler water or supply temperature.
• Page 26
  Settings Changing the heating pattern Vitocontrol-S, VD2/CT3/CM2 Changing the heating pattern 1. Open the hinged cover on the pro- gramming unit. 2. Press the heating circuit selector button; the button is illuminated. Slope Press for ”Slope” As a guide, please refer to the table headed ”Change heating Press for ”Shift”.
• Page 27
  Settings Changing the heating pattern Vitocontrol-S, VD2/CT3/CM2 (continued) Change heating pattern if … Action Example … not enough heat is generated in Adjust the slope of the heating the cold season curve upwards by one increment Slope … too much heat is generated in the Adjust the slope of the heating curve downwards by one increment cold season…
• Page 28
  Scanning Scanning temperatures and operating status information Vitotronic 100, GC1 You can scan various actual temperatures and operating status information depending on the system components connected: Data Meaning Please note displayed 0__01 LON participant number Equipment number within the LON system 3__65.
• Page 29
  Scanning Scanning temperatures and operating status information Vitocontrol-S, VD2/CT3/CM2 You can scan various actual temperatures and operating status information depending on the system components connected and the settings made. Participant no. Equipment number within the LON system Holiday program if entered with dates of departure and return Holiday program active if holiday program is activated…

• Page 30: Troubleshooting Guide

  Troubleshooting guide Special displays Vitocontrol-S, VD2/CT3/CM2 Please contact your heating contractor MService to arrange a service call. °C It is not possible to make settings on Example Remote control the control unit, only on the remote ”Normal room temperature” on control.

• Page 31: Diagnosis And Correction

  Troubleshooting guide Diagnosis and correction Vitotronic 100, GC1 If a fault occurs on a boiler, it will be indicated in the display window and by the flashing red fault lamp. In the display window you can read off the fault code yourself and inform your heating contractor accordingly.

• Page 32
  Troubleshooting guide Diagnosis and correction Vitotronic 100, GC1 Burner does not switch on Heating program ”9” is set (the Set ”rw” heating program corresponding button is illuminated) (page 10) Vitoair draught stabilizer defective Inform heating contractor. (only on boilers with pressure jet…
• Page 33
  Troubleshooting guide Diagnosis and correction Vitocontrol-S, VD2/CT3/CM2 If a fault occurs on the heating system, it will be indicated in the display DFault window and by the flashing red fault lamp. Using the scan facility, you can read off the fault code yourself and inform your °C heating contractor accordingly.
• Page 34
  Troubleshooting guide Diagnosis and correction Vitocontrol-S, VD2/CT3/CM2 (continued) Fault Cause Remedy Heating system switch ”8” Heating circuit does not start up Switch on Power supply disconnect switch, if Switch on power supply disconnect installed, is switched off switch Heating program ”9” is set (corre- Set ”rw”…
• Page 35
  Troubleshooting guide Diagnosis and correction Vitocontrol-S, VD2/CT3/CM2 (continued) Fault Cause Remedy The rooms are cold during the day Time incorrectly set Set correct time but warm at night Control unit incorrectly programmed Check and, if necessary, correct the or set settings for the temperatures , the time program and the heating pro- gram…
• Page 36
  +60 +140 +70 +158 +80 +176 +90 +194 +100 +212 +110 +230 Viessmann Manufacturing Company (U.S.) Inc. Viessmann Manufacturing Company Inc. 45 Access Road 750 McMurray Road Warwick, Rhode Island • 02886 • USA Waterloo, Ontario • N2V 2G5 • Canada Tel.

Chapters

Troubleshooting