Thank you for selecting the ZOOM 505 (hereafter simply called the «505»).
Please take the time to read this manual carefully so as to get the most out of
your 505 and to ensure optimum performance and reliability. Retain this manual
for future reference.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan
PHONE: 0423-69-7111 FAX: 0423-69-7115
Major Features
1
• 24 individual built-in effects provide maximum flexibility.
Up to 9 effects can be used simultaneously in any combination.
• Memory capacity for up to 24 user-programmable patches.
• Integrated auto-chromatic guitar tuner for simple and precise tuning
anywhere.
• Optional foot controller FP01 can be used for pedal wah or pedal pitch, and
volume control is also possible.
• Optional foot switch FS01 can be used for bank switching, resulting in
enhanced playability.
• Dual power supply principle allows the unit to be powered from an alkaline
battery or an AC adapter.
• New DSP (digital signal processor) ZFx-2 developed by Zoom produces
high-quality effects from an amazingly compact package.
Safety Precautions
2
USAGE AND SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented. The
meanings of these symbols are as follows:
This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and
handle the device the wrong way, serious injury or
Warning
death could result.
This symbol indicates explanations about dangerous
matters. If users ignore this symbol and handle the
device the wrong way, bodily injury and damage to the
Caution
equipment could result.
Please observe the following safety tips and precautions to ensure
hazard-free use of the 505.
About power
Warning
• Since power consumption of this unit is fairly high, we
recommend the use of an AC adapter whenever possible.
When powering the unit from a battery, use only an alkaline
type.
AC adapter operation
• Be sure to use only an AC adapter which supplies 9 V DC,
300 mA and is equipped with a «center minus» plug (Zoom
AD-0006). The use of an adapter other than the specified type
may damage the unit and pose a safety hazard.
• Connect the AC adapter only to an AC outlet that supplies the
rated voltage required by the adapter.
• When disconnecting the AC adapter from the AC outlet,
always grasp the adapter itself and do not pull at the cable.
• If the unit is not to be used for a long time, disconnect the AC
adapter from the outlet.
Battery operation
• Use only a 9 V (alkaline) battery (6LR61).
• The 505 cannot be used for recharging.
Pay close attention to the labelling of the battery to make sure
you choose the correct type.
• If the 505 is not to be used for an extended period of time,
remove the battery from the unit.
• If battery leakage has occurred, wipe the battery compartment
and the battery terminals carefully to remove all remnants of
battery fluid.
• While using the unit, the battery compartment cover should
be closed.
Environment
Caution
Avoid using your 505 in environments where it will be
exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
Handling
Caution
• The 505 is a precision instrument. Except for the foot
switches, do not push other parts with your feet or subject
them to strong force.
• Take care that no foreign objects (coins or pins etc.) or liquids
can enter the unit.
• Be sure to turn the power to all equipment off before making
connections.
• Before moving the unit, turn the power off, and disconnect all
cables and the AC adapter.
Alterations
Caution
Never open the case of the 505 or attempt to modify the
product in any way since this can result in damage to the unit.
Operation Manual
Printed in Japan 505-5000
Usage precautions
Electrical interference
For safety considerations, the 505 has been designed to provide
maximum protection against the emission of electromagnetic
radiation from inside the device, and from external
interference.However, equipment that is very susceptible to
interference or that emits powerful electromagnetic waves
should not be placed near the 505, as the possibility of
interference cannot be ruled out entirely.
Whatever the type of digital control device, the 505 included,
electromagnetic damage can cause malfunctioning, and can
corrupt or destroy data. Since this is an ever-present danger,
thorough care should be taken to minimize the risk of damage.
Cleaning
Use a soft, dry cloth to clean the 505. If necessary, slightly
moisten the cloth. Do not use abrasive cleanser, wax, or
solvents (such as paint thinner or cleaning alcohol), since these
may dull the finish or damage the surface.
Connecting cables and input and output jacks
You should always turn off the power to the 505 and all other
equipment before connecting or disconnecting any cables. Also
make sure to disconnect all cables and the AC adapter before
moving the 505.
Thank you for selecting the ZOOM 505 (hereafter simply called the «505«).
Please take the time to read this manual carefully so as to get the most out of
your 505 and to ensure optimum performance and reliability. Retain this manual
for future reference.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan
PHONE: 0423-69-7111 FAX: 0423-69-7115
Printed in Japan 505-5000
• 24 individual built-in effects provide maximum flexibility.
Up to 9 effects can be used simultaneously in any combination.
• Memory capacity for up to 24 user-programmable patches.
• Integrated auto-chromatic guitar tuner for simple and precise tuning
anywhere.
• Optional foot controller FP01 can be used for pedal wah or pedal pitch, and
volume control is also possible.
• Optional foot switch FS01 can be used for bank switching, resulting in
enhanced playability.
• Dual power supply principle allows the unit to be powered from an alkaline
battery or an AC adapter.
• New DSP (digital signal processor) ZFx-2 developed by Zoom produces
high-quality effects from an amazingly compact package.
USAGE AND SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented. The
meanings of these symbols are as follows:
Please observe the following safety tips and precautions to ensure
hazard-free use of the 505.
•
Since power consumption of this unit is fairly high, we
recommend the use of an AC adapter whenever possible.
When powering the unit from a battery, use only an alkaline
type.
AC adapter operation
•
Be sure to use only an AC adapter which supplies 9 V DC,
300 mA and is equipped with a «center minus» plug (Zoom
AD-0006). The use of an adapter other than the specified type
may damage the unit and pose a safety hazard.
•
Connect the AC adapter only to an AC outlet that supplies the
rated voltage required by the adapter.
•
When disconnecting the AC adapter from the AC outlet,
always grasp the adapter itself and do not pull at the cable.
•
If the unit is not to be used for a long time, disconnect the AC
adapter from the outlet.
Battery operation
•
Use only a 9 V (alkaline) battery (6LR61).
•
The 505 cannot be used for recharging.
Pay close attention to the labelling of the battery to make sure
you choose the correct type.
•
If the 505 is not to be used for an extended period of time,
remove the battery from the unit.
•
If battery leakage has occurred, wipe the battery compartment
and the battery terminals carefully to remove all remnants of
battery fluid.
•
While using the unit, the battery compartment cover should
be closed.
Avoid using your 505 in environments where it will be
exposed to:
•
Extreme temperature
•
High humidity or moisture
•
Excessive dust or sand
•
Excessive vibration or shock
•
The 505 is a precision instrument. Except for the foot
switches, do not push other parts with your feet or subject
them to strong force.
•
Take care that no foreign objects (coins or pins etc.) or liquids
can enter the unit.
•
Be sure to turn the power to all equipment off before making
connections.
•
Before moving the unit, turn the power off, and disconnect all
cables and the AC adapter.
Never open the case of the 505 or attempt to modify the
product in any way since this can result in damage to the unit.
Usage precautions
For safety considerations, the 505 has been designed to provide
maximum protection against the emission of electromagnetic
radiation from inside the device, and from external
interference.However, equipment that is very susceptible to
interference or that emits powerful electromagnetic waves
should not be placed near the 505, as the possibility of
interference cannot be ruled out entirely.
Whatever the type of digital control device, the 505 included,
electromagnetic damage can cause malfunctioning, and can
corrupt or destroy data. Since this is an ever-present danger,
thorough care should be taken to minimize the risk of damage.
Use a soft, dry cloth to clean the 505. If necessary, slightly
moisten the cloth. Do not use abrasive cleanser, wax, or
solvents (such as paint thinner or cleaning alcohol), since these
may dull the finish or damage the surface.
Connecting cables and input and output jacks
You should always turn off the power to the 505 and all other
equipment before connecting or disconnecting any cables. Also
make sure to disconnect all cables and the AC adapter before
moving the 505.
Major Features
Safety Precautions
Warning
This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and
handle the device the wrong way, serious injury or
death could result.
Caution
This symbol indicates explanations about dangerous
matters. If users ignore this symbol and handle the
device the wrong way, bodily injury and damage to the
equipment could result.
Warning
About power
Caution
Environment
Caution
Handling
Caution
Alterations
Electrical interference
Cleaning
1
2
Operation Manual
Loading…
Operation Manual
Thank you for selecting the ZOOM 505 (hereafter simply called the «505«).
Please take the time to read this manual carefully so as to get the most out of your 505 and to ensure optimum performance and reliability. Retain this manual for future reference.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan
PHONE: 0423-69-7111 FAX: 0423-69-7115
Printed in Japan 505-5000
1 Major Features
•24 individual built-in effects provide maximum flexibility.
Up to 9 effects can be used simultaneously in any combination.
•Memory capacity for up to 24 user-programmable patches.
•Integrated auto-chromatic guitar tuner for simple and precise tuning anywhere.
•Optional foot controller FP01 can be used for pedal wah or pedal pitch, and volume control is also possible.
•Optional foot switch FS01 can be used for bank switching, resulting in enhanced playability.
•Dual power supply principle allows the unit to be powered from an alkaline battery or an AC adapter.
•New DSP (digital signal processor) ZFx-2 developed by Zoom produces high-quality effects from an amazingly compact package.
2 Safety Precautions
USAGE AND SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows:
This symbol indicates explanations about extremely |
||||
dangerous matters. If users ignore this symbol and |
||||
handle the device the wrong way, serious injury or |
||||
Warning |
death could result. |
|||
This symbol indicates explanations about dangerous |
||||
matters. If users ignore this symbol and handle the |
||||
device the wrong way, bodily injury and damage to the |
||||
Caution |
equipment could result. |
Please observe the following safety tips and precautions to ensure hazard-free use of the 505.
Usage precautions
Electrical interference
For safety considerations, the 505 has been designed to provide maximum protection against the emission of electromagnetic radiation from inside the device, and from external interference.However, equipment that is very susceptible to interference or that emits powerful electromagnetic waves should not be placed near the 505, as the possibility of interference cannot be ruled out entirely.
Whatever the type of digital control device, the 505 included, electromagnetic damage can cause malfunctioning, and can corrupt or destroy data. Since this is an ever-present danger, thorough care should be taken to minimize the risk of damage.
About power
Warning• Since power consumption of this unit is fairly high, we recommend the use of an AC adapter whenever possible. When powering the unit from a battery, use only an alkaline type.
AC adapter operation
•Be sure to use only an AC adapter which supplies 9 V DC, 300 mA and is equipped with a «center minus» plug (Zoom AD-0006). The use of an adapter other than the specified type may damage the unit and pose a safety hazard.
•Connect the AC adapter only to an AC outlet that supplies the rated voltage required by the adapter.
•When disconnecting the AC adapter from the AC outlet, always grasp the adapter itself and do not pull at the cable.
•If the unit is not to be used for a long time, disconnect the AC adapter from the outlet.
Battery operation
•Use only a 9 V (alkaline) battery (6LR61).
•The 505 cannot be used for recharging.
Pay close attention to the labelling of the battery to make sure you choose the correct type.
•If the 505 is not to be used for an extended period of time, remove the battery from the unit.
•If battery leakage has occurred, wipe the battery compartment and the battery terminals carefully to remove all remnants of battery fluid.
•While using the unit, the battery compartment cover should be closed.
Environment
Caution Avoid using your 505 in environments where it will be exposed to:
•Extreme temperature
•High humidity or moisture
•Excessive dust or sand
•Excessive vibration or shock
Handling
Caution • The 505 is a precision instrument. Except for the foot switches, do not push other parts with your feet or subject them to strong force.
•Take care that no foreign objects (coins or pins etc.) or liquids can enter the unit.
•Be sure to turn the power to all equipment off before making connections.
•Before moving the unit, turn the power off, and disconnect all cables and the AC adapter.
Cleaning
Use a soft, dry cloth to clean the 505. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface.
Connecting cables and input and output jacks
You should always turn off the power to the 505 and all other equipment before connecting or disconnecting any cables. Also make sure to disconnect all cables and the AC adapter before moving the 505.
Alterations
Caution Never open the case of the 505 or attempt to modify the product in any way since this can result in damage to the unit.
3 |
What Are Banks and Patches? |
•PATCH
A combination of several effects, each with individual parameter settings is called a «patch». The 505 comes with 24 preset patches which can be changed (edited) by the user.
•BANK
The 505 calls up patches in sets of four, called a «bank».
BANK d |
|||||||||||
BANK C |
PATCH 1 |
||||||||||
BANK b |
|||||||||||
PATCH 1 |
PATCH 2 |
||||||||||
BANK A |
|||||||||||
PATCH 1 |
PATCH 2 |
PATCH 3 |
|||||||||
PATCH 1 |
PATCH 2 |
PATCH 3 |
PATCH 4 |
||||||||
PATCH 2 |
PATCH 3 |
PATCH 4 |
|||||||||
PATCH 3 |
PATCH 4 |
||||||||||
PATCH 4 |
|||||||||||
BANK F |
|||||
BANK E |
|||||
PATCH 1 |
|||||
PATCH 1 |
PATCH 2 |
||||
PATCH 2 |
PATCH 3 |
||||
PATCH 3 |
PATCH 4 |
||||
PATCH 4 |
|||||
The 505 has memory capacity for 24 patches. At the factory, these are programmed with recommended settings. The user can freely change the contents of any patch, and it is also possible to restore the factory settings.
BANK |
PATCH |
PATCH NAME |
COMMENT |
||
1 |
Super Dist Solo |
Tight and smooth distortion |
|||
A |
2 |
Clean Delay |
Clean sound with chorus and feedback delay |
||
3 |
Psycho Harmony |
Distortion sound for avant-garde harmony solos |
|||
4 |
Metal |
High-gain metal sound allows 2-octave bend-down with pedal |
|||
1 |
Mellow Drive |
Straight overdrive sound |
|||
b |
2 |
Wah Dist |
Distortion sound with auto wah and chorus |
||
3 |
Multi Phaser |
Multi Phaser |
|||
4 |
Steel China |
Synthesizer-like SFX sound |
|||
1 |
Rock Drive |
Straight rock sound |
|||
C |
2 |
Bright Chorus |
Chorus sound with a distinct edge |
||
3 |
Power Distortion |
Distortion with doubling as hidden flavor |
|||
4 |
Choir Wave |
Clean sound with transparent chorus and flanger |
|||
1 |
Jet Drive |
Wild jet sound with flanger |
|||
d |
2 |
Funky Phase |
Clean sound with wah and effect shift for rhythm play |
||
3 |
Head Long |
Zoom’s famous step-type effect |
|||
4 |
City Night |
Clean chorus sound |
|||
1 |
PWM Synth Lead |
Synthesizer sound with full effect palette |
|||
E |
2 |
JAZZY |
Warm jazz sound with octave overlays |
||
3 |
Octave Pitch |
Wild and heavy lead sound with up/down octave unison |
|||
4 |
Step Mode |
SF type sound combining step effect with chorus |
|||
1 |
Wah Fuzz |
Noisy wah/fuzz sound |
|||
F |
2 |
Blues Lead |
Lead sound for fusion and blues |
||
3 |
Blues Rhythm |
Cutting sound with distortion as hidden flavor |
|||
4 |
Acoustic |
Electric acoustic guitar simulation sound |
As shown in the illustration below, the 505 can be thought to contain seven «effect modules» which are internally connected. In most effect modules, only one effect may be active at any given time, but the COMP
and MOD modules can use two effects simultaneously. Therefore the 505 can act like a total of nine single effect devices.
INPUT COMP
Compressor
Compressor:
Keeps the input within a given level range.
Limiter:
Restricts the input level.
Auto Wah:
Shifts the emphasis frequency automatically, according to the input signal dynamics. Can also be used as Compressor+Auto
Wah.
Pedal Wah:
Shifts the emphasis frequency manually, according to the FP01 control signal from CONTROL IN. Can also be used as
Compressor+Pedal Wah.
DIST |
ZNR |
AMP |
EQ |
|||||
Distortion |
ZOOM Noise Reduction |
Amp Simulator |
Equalizer |
|||||
Acoustic: |
ZNR: |
AMP: |
4band EQ: |
|||||
Produces a sound similar to an |
Noise reduction with natural |
Makes the output sound as if |
Allows boost and cut in four |
|||||
electric acoustic guitar. |
sounding cutoff. |
coming from a guitar amplifier. |
ranges: presence, high, |
|||||
Rhythm: |
midrange, and low. |
|||||||
Gives slight distortion when |
ZNR/AMP BLOCK |
Phase Shift: |
||||||
strings are picked strongly. |
Applies a phase-shifted |
|||||||
OD: |
component to the direct sound. |
|||||||
The amount of shift varies |
Extended overdrive distortion
similar to driving a tube amp.
periodically, resulting in a breathing effect.
DIST:
Hard distortion comparable to driving a three-stack amp.
Blues:
Overdrive sound with a firm core.
Fuzz:
Choppy sound with fat bass.
Lead:
Bright and smooth distortion.
Metal:
Shredding type sound.
MOD |
DLY/REV |
OUTPUT |
|||
Modulation |
Delay/Reverb |
||||
Chorus: |
Delay: |
||||
Simple 2-phase chorus suitable |
Conventional digital delay with a |
||||
for achieving a clean sound. |
delay time of up to 370ms. |
||||
Flanger: |
Hall Reverb: |
||||
Adds a very short delay to the |
Simulates the acoustics of a hall. |
||||
direct sound and varies the delay |
Room Reverb: |
||||
time periodically, resulting in a |
Simulates the acoustics of a |
||||
peculiar sound character. Can |
room. |
also be used as Flanger+Chorus.
Doubling:
Overlays the direct sound with a short delay component, creating the impression of several players and making the sound more fullbodied. Can also be used as
Doubling+Chorus.
Step:
Randomly changing filter creates an auto-arpeggio effect. Can also be used as Step+Chorus.
Pitch Shift:
Can be used as dual-voice pitch shifter or Pitch+Chorus.
Top Panel |
OUTPUT |
INPUT |
|||||
TUNER indicator |
|||||||
In the Bypass (Mute)/Tuner mode, this indicator shows that the tuner is |
BANK HOLD |
||||||
active, and it serves as a gauge for fine tuning your instrument. |
LIMIT |
||||||
COMP |
COMP |
||||||
• Battery empty warning |
WAH |
PEDALWAH |
|||||
DIST |
ACOUSTIC RHYTHM |
||||||
When the unit is powered from the battery, this indicator begins to flash |
OD |
DIST |
BLUES |
||||
when the battery is exhausted. |
GAIN |
1-30 |
FUZZ |
LEAD |
+ |
||
STORE |
METAL |
||||||
ZNR |
|||||||
1-9 A1-A9 |
|||||||
AMP |
TUNER CAL . |
||||||
STORE key |
EQ |
EQ(1-50) PHASE |
EDIT VAL . |
||||
MOD |
CHORUS FLANGE |
BANK |
|||||
Serves to initiate and execute the store function for patches. |
EDIT |
DLY |
DOUBLE |
STEP PITCH |
– |
||
DELAY |
HALL |
ROOM |
|||||
• Direct Load function |
/REV |
||||||
LEVEL |
1-30 |
||||||
When the key is held down for at least 1 second in the Play mode, the |
|||||||
Direct Load function is turned on or off. |
DOWN |
UP |
|||||
BYPASS |
EDIT key
This key serves to toggle between the Play mode (where effects are used for playing the instrument) and Edit mode (where the user can freely change patch settings). The Edit mode is also used to select effect parameters.
When the key is pressed while a Delay/Reverb effect parameter is selected, the unit switches back to Play mode.
•Bank Hold function
When the key is held down for at least 1 second in Play mode, the Bank Hold function is turned on or off.
Display
Shows information required to operate the 505.
•Play mode:
Shows the currently selected bank and patch.
•Edit mode:
Shows the value of the parameter currently being edited.
•Bypass (Mute)/Tuner mode:
Shows the pitch of the input signal.
Parameter cursor LEDs
•Play mode:
The currently used effect module lights up.
•Edit mode:
The currently used effect module lights up. When selected for editing, the indicator for the effect module flashes.
•Bypass (Mute)/Tuner mode:
Indicators function as tuning meter.
VALUE + / — keys
•Play mode:
The keys serve for bank switching.
•Edit mode:
The keys serve for changing the effect parameter.
•Bypass (Mute)/Tuner mode:
The keys serve for setting the tuner reference pitch (calibration).
Patch UP / DOWN pedals
•Play mode:
The pedals serve for patch switching. Pressing both pedals simultaneously activates the Bypass (Mute)/Tuner mode.
•Edit mode:
Rear Panel
INPUT jack |
||||
Serves for connection of the guitar. |
||||
When the unit is powered from the battery, this jack also functions as |
||||
on/off switch. Plugging a shielded cable into the jack turns the 505 on. |
||||
When not using the unit, the cable should be disconnected to prevent |
INPUT |
DC 9V |
CONTROL IN |
OUTPUT |
battery drain. |
||||
DC IN jack |
300mA |
ZOOM CORPORATION |
[PHONES] |
|
Serves for connection of an AC adapter (Zoom AD-0006) which |
MADE IN JAPAN |
|||
delivers 9 V DC, 300 mA with a «center minus» plug configuration. |
||||
When the AC adapter is connected to this jack, the 505 is turned on. |
The pedals serve for selecting effect parameters. Pressing both pedals simultaneously turns the currently selected effect module on or off.
•Bypass (Mute)/Tuner mode:
Pressing a pedal cancels the Bypass (Mute)/Tuner mode.
OUTPUT jack
The output signal of the 505 appears at this jack.
You can connect either a single guitar amplifier, using a monaural shielded cable, or two guitar amplifiers, using a Y-type stereo shielded cable, or a pair of stereo headphones. If the volume level is low when using headphones, increase the patch level or master level, or use headphones with low impedance (32 ohms or less).
CONTROL IN jack
When the optional expression pedal FP01 is connected to this jack, it can serve as volume pedal or be used for pedal wah and pedal pitch. When the optional foot switch FS01 is connected, it can serve for bank UP switching.
You can only view or download manuals with
Sign Up and get 5 for free
Upload your files to the site. You get 1 for each file you add
Get 1 for every time someone downloads your manual
Buy as many as you need
Patch Switching (Application: Bank Hold ON)
9
In the factory default condition,
the patch pedal switches all
Bank Hold ON
patches, regardless of the bank
Keeping the EDIT key depressed for at least 1 second activates Bank
divisions. This kind of patch
Hold. To cancel Bank Hold, press the EDIT key again for 1 second.
switching is called the Bank Hold
off condition.
The Bank Hold function limits
switching to the four patches
within a bank. When the function
is activated, the patch pedals
switch only between the patches
in the current bank. To activate the
function, keep the EDIT key
depressed for at least 1 second in
the Play mode. The BANK HOLD
indicator on the display lights up.
To turn the function off again,
perform the same step (press the
EDIT key for at least 1 second).
The BANK HOLD indicator on
the display goes out.
Bank switching can be performed
using the VALUE + / — keys or the
optional foot switch FS01
connected to the CONTROL IN jack on the rear panel.
Bank/patch switching
when Bank Hold is on
BANK d
BANK C
PATCH 1
PATCH 2
BANK b
PATCH 1
PATCH 3
PATCH 2
BANK A
PATCH 1
PATCH 4
PATCH 3
PATCH 2
PATCH 1
PATCH 4
PATCH 3
PATCH 2
PATCH 4
PATCH 3
PATCH 4
Patch Switching (Application: Direct Load OFF)
10
In the default condition, the 505 is
set up in such a way that pressing a
patch pedal immediately switches
the patch and alters the output
sound. This is called Direct Load
ON. This switching principle is
most convenient when the desired
patches are adjacent or close to
each other. However, when
wanting to switch to a patch that is
further away, it may be desirable
not to activate the sound of the
other patches in between.
When this is desired, turn the
Direct Load function off as
follows. When Direct Load has
been turned off, switching banks
and patches has no effect until the
user confirms the selection.
For example, when going from
patch 1 to patch 4 with Direct Load active, patches 2
and 3 will briefly be heard when the patch UP pedal
is pressed three times. When Direct Load is off,
pressing the patch UP pedal will change the number
on the display (the number flashes), but until the
user confirms the choice, the sound remains that of
patch 1.
To turn Direct Load on or off, keep the STORE key
depressed for at least 1 second.
To confirm a choice after selecting a patch with
Direct Load off, press both patch pedals
simultaneously.
Example: switching from patch 1 to patch 4
Bank switching
Banks A, b, C, d, E, F
can be switched.
PATCH
PATCH
DOWN
UP
Patch switching
4 patches within bank can be switched.
Bank switching (Bank UP pedal)
Using optional foot switch FS01,
banks A, b, C, d, E, F can be switched by foot.
BANK F
BANK E
PATCH 1
PATCH 2
PATCH 1
PATCH 3
PATCH 2
PATCH 4
PATCH 3
PATCH 4
BANK HOLD ON
BANK HOLD OFF
DIRECT LOAD OFF
Keeping STORE key depressed for 1 second
turns Direct Load off.
The same procedure serves to turn it on.
Bank switching
Banks A, b, C, d, E, F
can be switched.
PATCH
PATCH
DOWN
UP
Patch switching
Patches can be switched.
Confirming a patch
When display indication flashes, pressing
both patch pedals together confirms the
patch and switches the output sound.
Patch switching completed
Confirm
ZOOM
FS01
Предлагаем вам документ Инструкция по эксплуатации на Zoom 505: PDF файл 199 Kb, 6 страниц.
Инструкция по эксплуатации 505 — читать онлайн или скачать бесплатно. Также, вы можете задать любой вопрос про Zoom 505.
Скачать файл Инструкция по эксплуатации Zoom 505
Размер файла: 199 Kb
Кол-во страниц: 6
Просмотров: 7047
Тип файла: Portable Document Format (PDF)
Вы робот?
60
Скачать Инструкция по эксплуатации:
zoom-505-14-user-s-manual.pdf
Читать онлайн Zoom 505 Инструкция по эксплуатации
←
1/6
→
Specifications:
|
Accompanying Data:
Zoom 505 GUITAR Musical Instrument Amplifier PDF Operation Manual (Updated: Tuesday 6th of September 2022 05:15:54 PM)
Rating: 4.8 (rated by 31 users)
Compatible devices: GFX-5, 506II Bass, MULTISTOMP MS-60B, 606 Guitar, RFX-2200, Zoom player 3000, RhythmTrak RT-323, G1on.
Recommended Documentation:
Zoom 505 GUITAR: Text of Operation Manual
(Ocr-Read Version Summary of Contents, UPD: 06 September 2022)
-
1, Thank you for selecting the ZOOM 505 (hereafter simply called the «505»). Please take the time to read this manual carefully so as to get the most out of your 505 and to ensure optimum performance and reliability. Retain this manual for future reference. ZOOM CORPORATION NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan PHONE: 0423-69-7111 FAX: 0423-69-7115 Printed in J…
-
2, • PATCH A combination of several effects, each with individual parameter settings is called a «patch». The 505 comes with 24 preset patches which can be changed (edited) by the user. • BANK The 505 calls up patches in sets of four, called a «bank». The 505 has memory capacity for 24 patches. At the factory, these are programmed with recommended settings. The user can fr…
-
3, The 24 patches can be selected easily by pressing the patch pedals. The right patch pedal switches to the next patch and the left patch pedal switches to the previous patch. In the initial condition, the 505 is set up so that the patch pedals select patches continuously, but you can also set up the unit so that patches are switched only within a certain bank [s…
-
4, In the factory default condition, the patch pedal switches all patches, regardless of the bank divisions. This kind of patch switching is called the Bank Hold off condition. The Bank Hold function limits switching to the four patches within a bank. When the function is activated, the patch pedals switch only between the patches in the current bank. To activate the function, kee…
-
5, Compressor The input signal from the guitar is compressed to achieve a uniform volume level. Higher values result in stronger compression. Limiter Limits the input signal with faster response than the compressor effect. Serves to prevent overload of other modules. Higher values result in more effective limiting. Auto Wah With this effect, emphasized frequencies…
-
6, If you have edited (altered) a patch and turn the 505 off without storing the patch, the patch will revert to its old setting. To store an edited patch, use the following simple procedure. Storing can be carried out in Play mode and Edit mode. After you have edited the patch, press the STORE key. If the unit is currently in Play mode, release the key before 1 …
Zoom 505 GUITAR: Recommended Instructions
SBT 3.0 A1, StorTrends 2104, R2200, R-8, PAC-SV01PW-E, E4440A
-
REAR PANELSPECIFICATIONS•Rated Power Output 30W + 30W •Nominal Input Level (1 kHz) <GUITAR Channel>: -10 dBu, <MIC/LINE Channel>: -50/ -10 dBu, <AUX IN>: -10 dBu •Nominal Output Level (1 kHz) <DI/TUNER OUT>: +4 dBu, <LINE OUT>: +4 dBu, <SUB WOOFER OUT>: +4 dBu •Speakers 16 cm (6.5 inches) x 2 •Controls <GUITAR …
AC-60 2
-
+ VALVULATOR I TM Vacuum Tube Buffer + Power Supply Owners Manual 2 Introduction Congratulations and thank you for choosing the FRYETTE Valvulator I Vacuum Tube Buffer + Power Supply. As a player, you are constantly searching for new sounds and new ways to improve your existing setup. We understand the constantly evolving nature of artistic creativity and t …
Valvulator I 4
-
ORANGE MUSIC ELECTRONIC CO.,LTDWARNING! Congratulations on your Orange Micro Crush purchase. You have chosen to buy the coolest practice amp in the world.We hope you have lots of fun using your Micro Crush amp, but before you start playing please take a moment to read this manual and familiarize your self with your amplifier and its controls. USIN …
CR3 Micro Crush PX 2
-
OWNER’S MANUALACLProtectACLActiveSignalSignalOffRemoteOnCh ACh BCKV 80 0Professional Power AmplifierACLProtectACLActiveSignalSignalOffRemoteOnCh ACh BCKX 500Professional Power AmplifierACLProtectACLActiveSignalSignalOffRemoteOnCh ACh BCKS 800Professional Power AmplifierPOWER PROCESSINGAMPLIFIERS …
CKS 20
-
POWER REQUIREMENTS*Operable with phantom power supply, minimum 24V DC regulated, however, 48V DC regulated is recommended in order to illuminate LED.*Utilizes standard 9V alkaline battery (not included). To install, simply removedoor cover. (NOTE: The Input activates battery. To conserve energy, unplugwhen not in use.) Power Consumption: approx. 6mA.*USE DC POWER SUPPLY ONLY! Failure to do so may …
SansAmp BASS DRIVER DI 6
-
OWNER’S MANUALCongratulations on the purchase of your new Kustom amplifier! Your new GROOVE1300™ offers unsurpassed sound quality and performance characteristics. Inside thismanual you’ll find detailed information regarding the amplifier’s features. We wish youmany years of enjoyment with your Kustom GROOVE 1300™.GROOVE 1300BASS AMPLIFIER™ …
GROOVE 1300 12
-
Head and Combo Versions:El Diablo 60 (Head)El Diablo 60-TS (Head – Tribal Series)El Diablo 60-C (Combo)CONGRATULATIONS!Thank you for your purchase of the GENZ BENZ EL DIABLO 60. I believe you will fi nd that this tube amp will immediately become an invaluable tool in your quest for the best possible guitar tone. EL DIABLO’s versatile features will certainly en-hance the feel a …
El diablo 60 12
-
Please, first read this manual carefully!Operator´s ManualRitchie BlackmoreSignatureInputLeadPresenceLeadVolumeClean Lead Bass Middle TrebleBright Contour GainLo/HiCleanLeadPowerStand ByMaster ALo GainMaster BHi GainRitchie BlackmoreSignature 100Guitar Amplifier …
Ritchie Blackmore Signature 6