Thank you for selecting the ZOOM 506 (hereafter simply called the «506»).
Please take the time to read this manual carefully so as to get the most out of
your 506 and to ensure optimum performance and reliability. Retain this manual
for future reference.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan
PHONE: 0423-69-7111 FAX: 0423-69-7115
Major Features
1
• 24 individual built-in effects provide maximum flexibility.
Up to 8 effects can be used simultaneously in any combination.
• Memory capacity for up to 24 user-programmable patches.
• Integrated auto-chromatic bass guitar tuner for simple and precise tuning
anywhere.
• Optional foot controller FP01 can be used for pedal wah or pedal pitch, and
volume control is also possible.
• Optional foot switch FS01 can be used for bank switching, resulting in
enhanced playability.
• Dual power supply principle allows the unit to be powered from an alkaline
battery or an AC adapter.
• New DSP (digital signal processor) ZFx-2 developed by Zoom produces
high-quality effects from an amazingly compact package.
Safety Precautions
2
USAGE AND SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented. The
meanings of these symbols are as follows:
This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and
handle the device the wrong way, serious injury or
Warning
death could result.
This symbol indicates explanations about dangerous
matters. If users ignore this symbol and handle the
device the wrong way, bodily injury and damage to the
Caution
equipment could result.
Please observe the following safety tips and precautions to ensure
hazard-free use of the 506.
About power
Warning
Since power consumption of this unit is fairly high, we
recommend the use of an AC adapter whenever possible.
When powering the unit from a battery, use only an alkaline
type.
AC adapter operation
• Be sure to use only an AC adapter which supplies 9 V DC,
300 mA and is equipped with a «center minus» plug (Zoom
AD-0006). The use of an adapter other than the specified type
may damage the unit and pose a safety hazard.
• Connect the AC adapter only to an AC outlet that supplies the
rated voltage required by the adapter.
• When disconnecting the AC adapter from the AC outlet,
always grasp the adapter itself and do not pull at the cable.
• If the unit is not to be used for a long time, disconnect the AC
adapter from the outlet.
Battery operation
• Use only a 9 V (alkaline) battery (6LR61).
• The 506 cannot be used for recharging.
Pay close attention to the labelling of the battery to make sure
you choose the correct type.
• If the 506 is not to be used for an extended period of time,
remove the battery from the unit.
• If battery leakage has occurred, wipe the battery compartment
and the battery terminals carefully to remove all remnants of
battery fluid.
• While using the unit, the battery compartment cover should
be closed.
Environment
Caution
Avoid using your 506 in environments where it will be
exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
Handling
Caution
• The 506 is a precision instrument. Except for the foot
switches, do not push other parts with your feet or subject
them to strong force.
• Take care that no foreign objects (coins or pins etc.) or liquids
can enter the unit.
• Be sure to turn the power to all equipment off before making
connections.
• Before moving the unit, turn the power off, and disconnect all
cables and the AC adapter.
Alterations
Caution
Never open the case of the 506 or attempt to modify the
product in any way since this can result in damage to the unit.
Operation Manual
Printed in Japan 506-5000
Usage precautions
Electrical interference
For safety considerations, the 506 has been designed to provide
maximum protection against the emission of electromagnetic
radiation from inside the device, and from external
interference.However, equipment that is very susceptible to
interference or that emits powerful electromagnetic waves
should not be placed near the 506, as the possibility of
interference cannot be ruled out entirely.
Whatever the type of digital control device, the 506 included,
electromagnetic damage can cause malfunctioning, and can
corrupt or destroy data. Since this is an ever-present danger,
thorough care should be taken to minimize the risk of damage.
Cleaning
Use a soft, dry cloth to clean the 506. If necessary, slightly
moisten the cloth. Do not use abrasive cleanser, wax, or
solvents (such as paint thinner or cleaning alcohol), since these
may dull the finish or damage the surface.
Connecting cables and input and output jacks
You should always turn off the power to the 506 and all other
equipment before connecting or disconnecting any cables. Also
make sure to disconnect all cables and the AC adapter before
moving the 506.
249 ₽
Инструкция (руководство пользователя) на Процессор эффектов ZOOM 506-II Bass
Артикул: zoom-506-ii-bass
Категория: ZOOM
-
Описание
-
Детали
Описание
Инструкцию по эксплуатации ZOOM 506-II Bass на русском языке можно будет скачать в личном кабинете после оформления и оплаты заказа.
Детали
Формат файла |
|
---|---|
Размер инструкции в кб |
544 |
7
Bank switching
Banks A, b, C, d, E, F are available
PATCH
PATCH
DOWN
UP
Patch switching
24 patches are available
The 24 patches can be selected easily by
pressing the patch pedals. The right patch
pedal switches to the next patch and the
left patch pedal switches to the previous
patch.
In the initial condition, the 506 is set up
so that the patch pedals select patches
continuously, but you can also set up the
unit so that patches are switched only
within a certain bank [see the section
«Patch Switching (Application: Bank
Hold»)].
Bank switching is performed with the
VALUE + / — keys.
If for example the currently selected patch
is patch 2 of bank A, and you want to
switch to patch 3 of bank C, you would
need to press the UP pedal nine times.
Instead, you can press the VALUE + key
twice and then the UP pedal once.
If the optional FS01 is connected to the
CONTROL IN jack on the rear panel, the
foot switch can be used as a bank UP
pedal. This allows full foot control, which
is highly convenient during a
performance.
Using the Bypass (Mute)/Tuner Mode
8
In the Bypass mode, the effects of
the 506 are temporarily turned off,
so that the original sound of the
instrument only is heard. In this
mode, the auto-chromatic tuning
function is also active. It is also
possible to activate muting, to
prevent the tuning sound from
being sent to the output.
Press both
pedals together
Bypass and mute condition
Pressing both patch pedals simultaneously activates the Bypass or Mute mode.
• For bypass mode: Press and immediately release the patch pedals.
Currently selected
patch is indicated
• For mute mode: Press patch pedals for at least 1 second.
Currently selected
patch is indicated
To cancel the bypass or mute condition, simply press one of the patch pedals. The unit then
reverts to the previously selected patch.
Tuning function
When the 506 is in the Bypass or Mute mode, the tuning function is activated automatically. Pick
an open string to be tuned. The closest note is shown on the display.
Input signal
standby condition
w
? w
?
Do = C
w
? #w
?
Do# = C#
#w
? w
Regular tuning
?
Re = D
2nd string
w
#w
Regular tuning
?
?
Re# = D#
When the tuning function is active, the
parameter cursor LEDs serve as tuning
meter, designed to enhance tuning
precision when making fine adjustments.
BANK F
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK E
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK UP
BANK d
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK C
PATCH 1
PATCH 2
BANK DOWN
PATCH 3
PATCH 4
BANK b
PATCH 1
PATCH 2
PATCH 3
PATCH 4
BANK A
PATCH 1
PATCH 2
PATCH 3
Bank/patch switching
PATCH 4
when Bank Hold is off
Calibration
Select reference pitch for auto-chromatic
bass guitar tuner (calibration)
* Reference pitch (A) can be adjusted in
the range from 435 to 445 Hz. This is
shown as «35» to «45» on the display.
The normal setting is 440 Hz (40).
Bypass (Mute)/Tuner mode ON
Pressing both patch pedals simultaneously turns
the Bypass (Mute)/Tuner mode on. To turn the
mode off, simply press one of the two patch pedals.
Press
Release immediately
Press for 1 s or more
Release
#w
Regular tuning
4th string
?
Mi = E
So# = G#
w
Regular tuning
?
Fa = F
La = A
#w
?
Fa# = F#
La# = A#
w
?
So = G
Si = B
1st string
Pitch is too high
Correctly tuned
Tuner mode
Mute mode
3rd string
Pitch is too low