Zoom rfx 2000 инструкция на русском - Arganabio.ru - инструкции по эксплуатации и многое другое

Introduction

Thank you for selecting the ZOOM RFX-2000 (hereafter simply called the «RFX-2000»). The

RFX-2000 is a sophisticated digital reverb and multi-effect processor with the following features

and functions.

• Versatile effects and high-quality reverb

The RFX-2000 comes with a full complement of 48 preset effects (8 effects x 6 banks). The

reverb effects alone allow 121 different settings. The convincing sound stage created by the

RFX-2000 far surpasses anything else available in this class.

• 100 patch memory for immediate use

Up to 100 patches (effect settings) can be stored in the internal memory. Calling up any patch is

quick and easy.

• Supplied editing software

The RFX-2000 is supplied with nifty software that lets you manage and edit patches on a

computer. (Versions for Windows 95/98 and Macintosh are included.) Besides patch editing and

management, the software also provides access to eight additional effects including a 31-band

graphic equalizer and a 20-tap delay effect.

• Digital output

The S/PDIF output (with optical and coaxial connectors) allows connection to consumer

equipment with digital input (digital multitrack recorder, MD recorder, DAT recorder or

similar), keeping the signal in the digital domain.

• MIC IN jack

The dedicated microphone jack on the front panel comes in handy for creating vocal effects

without having to make cumbersome connections in the rear. Controlling the VOCODER effect

is a snap thanks to this feature.

• Built-in tap input

Time-based parameters such as delay time can be entered directly, using the tap input feature.

This makes it easy for example to match the delay time to the tempo of a song.

• MIDI based control

Functions such as patch switching, real-time parameter control, and storing of patch data on

external equipment can be performed via a MIDI link.

Please take the time to read this manual carefully so as to get the most out of your RFX-2000 and to

ensure optimum performance and reliability. Retain this manual, the warranty card and all other

documentation for future reference.

* Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation.

* Macintosh is a registered trademark of Apple Computer Inc.

Contents

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

OPERATION MANUAL

• • • • • • • • • • • • • • • • •

• • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • •

• • • • •

Источник

Не только медтехника:RFX-2200 — это сложный цифровой ревербератор и многоэффектный процессор со следующими особенностями и функциями. Инструкция на русском. ZOOM RFX-2200 Инструкция на русском ZOOM, RFX-2200, Инструкция, на русском.

Процессор эффектов RFX 2200 производят 24-разрядную обработку. Частота дискретизации 44,1 кГц. Среди алгоритмов есть реверберация (11 типов), компрессор/лимитер, дилей, смещение высоты тона, хорус, фленджер, фейзер, тремоло, автопаннер, комбинированные эффекты, «мастеринговые» эффекты, имитатор модели микрофона, спикосимулятор, имитатор вращения динамиков, кольцевой модулятор, вокодер.

На передней панели процессора находятся регуляторы входного и выходного уровней, баланса прямого и обработанного сигналов, времени реверберации, селектор вариации эффекта, симметричный микрофонный вход (комбинированный разъем XLR/джек) с кнопкой и светодиодным индикатором включения, кнопка питания.

На задней панели есть два линейных входа и два выхода (джеки), вход для педального переключателя FS 01 (33$), гнездо для кабеля питания.

Процессор RFX 2200 (203$) содержит шесть банков по восемь алгоритмов с 11 вариациями каждый. Есть дополнительные алгоритмы эффектов: синхронизируемый с темпом дилей, фильтры, четырехполосный эквалайзер, трехполосный компрессор. Возможно сохранение настроек, процессор имеет 48 пресетных и 100 пользовательских пэтчей. Поддерживается MIDI, в том числе для управления параметрами. Есть двухсимвольный дисплей, кнопки выбора банка, селектор алгоритма, шесть светодиодов индикатора уровня, два регулятора тембра реверберации, кнопка ввода темпа, цифровой выход формата SPDIF (оптический и электрический), три MIDI-разъема. Преобразователи 20-разрядные, АЦП с 64-кратной передискретизацией, ЦАП со 128-кратной.

Устройство однорэковое, габариты: 482 x 115 x 44 мм, масса 1,8 кг.

Инструкция по эксплуатации ZOOM RFX-2200 на русском языке (43 страницы)

Как приобрести

Стоимость доставки 4,0 WMZ, оплата посредством WebMoney. Если данное предложение Вас устраивает — свяжитесь с администрацией сайта.

Дата публикации: 23.12.2019

ZOOM, RFX-2200, Инструкция, на русском.

Страница сгенерирована за 0.025425 секунды

Техническая и эксплуатационная документация

Пресс-релизы

Источник

Created by
ataninghos1973
2017-10-05

———————————————————
>>> СКАЧАТЬ ФАЙЛ <<<
———————————————————
Проверено, вирусов нет!
———————————————————

Documents. PDF icon RFX-2000 Operation Manual (English). PDF icon RFX- 2000 Mode d emploi (French). PDF icon RFX-2000 Bedienungsanleitung ( German). Digital Reverb & Multi Effects RFX-2000 Achieve excellence. More than you could expect from. PDF icon Zoom RFX-2000 Operation Manual (English 1.33 MB). Thank you for selecting the ZOOM RFX-2000 (hereafter simply called the. time to read this manual carefully so as to get the most out of your RFX-2000 and to. View and Download Zoom RFX-2000 operation manual online. digital reverb & multi effects. RFX-2000 Musical Instrument Amplifier pdf manual download. Просмотр полной версии : Инструкции на русском (мануалы). DP-24 · Ищу мануал на Behringer Virtualizer FX2000 3D, можно и англоязычный. Мануал на Zoom RFX-2200,Mackie 1202-vlz · ищу инструкцию на русском к denon. 9 Sep 2010. Aqui esta el video que muetra principalmente la logica que sigue el Procesador en su funcionamiento. Se muestran algunos presets asi. Компания Zoom выпустила два новых однорэковых процессора эффектов: RFX 1000 и RFX 2000. Среди алгоритмов есть ревербератор. Zoom(Зум) RFX-1100 Процессор Эффектов, инструкция, поддержка, форум, описание, мануал, руководство, форум, Инструкция по эксплуатации. Two of Zoom s budget studio effects processors have been re-released with a few. and RFX2000 multi-effects processors reviewed back in SOS January 2000. Now, as then, both RFX models are based on the same set of effects. use of the in-built vocoder effect, which Zoom seem keen to point out in the manual. Бесплатная доставка. Заказать Ревербератор Zoom RFX-2000. Описание: МОДЕЛЬ СНЯТА С ПРОИЗВОДСТВА Питание: 12 В, 500 мА от адаптера. Results 1 — 18 of 18. ZOOM RFX-2000 REVERB VOCODER EFFECTS PROCESSOR WITH. MULTI EFFECTS RACK PROCESSOR WITH MANUAL & POWER. 1 day ago. Great condition and working order (a few tiny marks on top from sitting in rack, the rest of it is perfect) Comes with manual and power supply. Processeur multi-effets Zoom RFX-2000: 27 photos, 5 discussions dans les. Le RFX-2000 est un multi-effet studio au format rack 1U. RFX-2000 Manual. 6 hours ago. Zoom RFX 2000 vocal/guitar effects processor for sale,still in working order unfortunately no manual. Results 1 — 26 of 26. USED ZOOM RFX — 2000 Multi Effector Processor AD DA converter w/. Manual mode allows editing parameters in real time while using an.

Comments ()

You can clone a snippet to your computer for local editing.

Learn more.

Источник

Loading…

OPERATION MANUAL

Using the MIDI Control Function • • • • • 10

Front Panel

(1) POWER switch	(10) STORE key	(12) VALUE UP/DOWN keys

	(2) MIC IN jack	(11)	Level meter	(13) BANK key

(3)	INPUT control			(14) Display
	(4) OUTPUT control
	(5) MIX control and LED		(15) TAP key and LED
	(6) CANCEL key		(16) BYPASS key and LED
	(7) COMPARE key
	(8)	MIDI key
		(9) PARM CHECK key

(1)POWER switch

Serves to turn the unit on and off.

(2)MIC IN jack

A dynamic microphone with an output impedance of about 600 ohms can be connected here. Normally the input signal from this jack is mixed with the signal from the rear-panel INPUT jacks and sent to the internal effect circuitry. When the VOCODER effect is selected, the mike input signal serves for controlling the sound character and the envelope (volume change curve) of the effect.

(3)INPUT control

Serves to adjust the signal from the INPUT jacks and the MIC IN jack.

(4)OUTPUT control

Serves to adjust the level of the signal supplied at the OUTPUT jacks.

(5)MIX control and LED

Serves to adjust the balance between original sound (DRY) and effect sound (WET). When the control is

turned fully counterclockwise, only the original sound is output. When the control is turned fully clockwise, only the effect sound is output. If the mixing balance setting was changed since the last store operation, the LED lights up.

(6)CANCEL key

Serves to cancel a store operation.

(7)COMPARE key

When a patch (group of stored effect settings) is being edited, this key can be used to compare the sound before and after the edit.

(8)MIDI key

This key is used to make various MIDI settings.

(9)PARM CHECK key

Serves for checking effect parameter settings.

(10)STORE key

Used for storing patches in memory and other functions.

(11)Level meter

These indicators show the signal input level.

Rear Panel

(2) BYPASS jack

(1) MIDI connectors

(1)MIDI connectors

Serves for connection to the MIDI interface of a computer or to a MIDI keyboard or similar. This allows patch switching from external equipment or control of the entire operation of the RFX-2000 from a computer, using the supplied editor/librarian software.

(2)BYPASS jack

Serves for connection of the foot switch FS01 (option) for switching effects on and off.

(3)DIGITAL OUT connectors

The same signal as available at the OUTPUT jacks is carried by these connectors in S/PDIF digital format. This can be used to supply the signal to consumer equipment with a digital input, such as a digital multitrack recorder,

2 ZOOM RFX-2000

Controls and Functions

Front Panel

(17) BANK LEDs

(19) REV CHARACTER (EDIT 1) control and LED

(20) REV TIME (EDIT 2) control and LED

(18) EFFECT TYPE selector and LED

(22) REV EQ HIGH (EDIT 4) control and LED

(21) REV EQ LOW (EDIT 3) control and LED

(12) VALUE UP/DOWN keys

(17) BANK LEDs

Serve for switching patches and changing parameter values. Holding down one key while pressing the other results in a fast change.

(13)BANK key

Serves to select the effect bank (group of effects arranged by general type).

(14)Display

Shows various information such as patch numbers and parameter values.

(15)TAP key and LED

This key serves for tap input of time-based parameters such as delay time and rate. When an effect where tap input can be used is selected, the LED flashes with a frequency that indicates the current setting. When an effect where tap input cannot be used is selected, the LED is out.

(16)BYPASS key and LED

These indicators show which bank is currently selected. When the EXTRA bank (only selectable with the supplied software) is selected, all six LEDs are lit.

(18)EFFECT TYPE selector and LED

Serves to choose an effect from the currently selected bank. If the setting was changed since the last store operation, the LED lights up.

(19)REV CHARACTER (EDIT 1) control and LED

(20)REV TIME (EDIT 2) control and LED

(21)REV EQ LOW (EDIT 3) control and LED

(22)REV EQ HIGH (EDIT 4) control and LED

These controls allow the user to adjust effect parameters to a desired value. Which parameters can be adjusted depends on the currently selected effect. If a setting was changed since the last store operation, the respective LED lights up.

Serves to set the unit to the bypass condition where only the original sound is output. In this condition, the LED is lit.

Rear Panel

(3)DIGITAL OUT connectors

(4)OUTPUT jacks (5) INPUT jacks

(6) POWER (AC adapter) connector

MD recorder, or DAT recorder. The optical and coaxial output connectors can be used at the same time. The OUTPUT control is not active in this case.

(4)OUTPUT jacks

Connect these jacks to the recorder or playback system.

(5)INPUT jacks

Connect a line-level source, such as an instrument or CD

player to these jacks. If a plug is inserted only in the L/MONO jack, the signal from this plug will be supplied to both channels.

(6)POWER (AC adapter) connector

The supplied AC adapter is to be connected here for powering the unit.

Functions and Controls

ZOOM RFX-2000 3

The RFX-2000 is compatible with international 19-inch rack standards (EIA, DIN). Because the unit has been designed for rack installation, it is preferable to operate the unit in this

• The RFX-2000 uses a metal frame, making the unit heavier than it might seem at first

Caution glance. While installing the unit in a rack, carefully support the weight of the unit until all screws are securely tightened. Otherwise the unit may drop, possibly causing injury to persons or damage to itself or to other equipment.

•Do not directly stack the unit on top of other equipment. Otherwise heat may

way, rather than simply placing it on a table or similar. Align the four screw holes with the rack screw holes and securely fasten the unit to the rack with screws.

lead to a fire risk or cause performance degradation.

•Before installation, always unplug any connecting cables and the AC adapter cable. Otherwise the equipment or the cables may be damaged.

•Make sure that the rack in which the unit is installed is placed on a firm, solid surface, so that it cannot shake or topple over. Otherwise there is a risk of injury to persons or damage to the unit or to other equipment.

This section shows how to connect the RFX-2000 to the sound source and to the playback system.

Insert Connection

Send/Return Connection

digital multitrack recorder, MD recorder, or DAT recorder) is

4 ZOOM RFX-2000

Rack Mounting

* Rack mount screws are not supplied with the unit.

Getting Connected

Using the VOCODER Effect

MD player or sampler or similar with recorded voice

Connected Mounting/Getting Rack

Synthesizer	INPUT	OUTPUT
	L/MONO R	L R
Microphone
	MIC IN	RFX-2000 Keyboard amplifiers

This is a connection example for using the VOCODER effect from the SFX bank. Connect a dynamic microphone to the front-panel MIC IN jack on the RFX-2000. Connect a synthesizer or other instrument to the rear-panel INPUT L/MONO jack. You can then use the mike to vary the

envelope (volume change curve) and the sound character of the VOCODER effect.

If nothing is connected to the MIC IN jack, the signal supplied to the INPUT L/MONO jack is controlled by the signal supplied to the INPUT R jack.

Controlling the RFX-2000 Effects from a Computer

Sound source MIDI IN module

Computer

MIDI interface	MIDI IN	MIDI IN	MIDI OUT	RFX-2000 Playback system

The supplied software can be used to edit the patches of the	Note: For information on software installation, please
RFX-2000, switch the patches in conjunction with other	refer to the separate sheet. For information on
sequencer software, and to control patch switching and make	how to use the software, please refer to the
parameter changes. To enable these functions, make	documentation included on the CD-ROM.
connections as shown above.

ZOOM RFX-2000 5

This section is intended to familiarize you with the basic operation steps of the RFX-2000.

Power UP

1. Verify that the AC adapter, sound source, and playback system are correctly connected to the RFX-2000.

The INPUT control and OUTPUT control of the RFX2000 as well as the volume control of the playback system should be set to minimum.

2. Turn on the system in the following order: sound source RFX-2000 playback system.

3. While playing the sound source, turn up the

INPUT control of the RFX-2000 to adjust the input level.

To minimize noise and distortion, the INPUT control should be set as high as possible without causing the CLIP LED to light.

4. Adjust the OUTPUT control and the volume control of the playback equipment to obtain a suitable playback volume.

Selecting a Patch

The memory of the RFX-2000 contains 100 stored patches. The display shows the number of the currently selected patch (01, 02,…99, 00). This condition is called the play mode.

To switch patches, proceed as described below. We suggest that you simply try out various patches to see what kind of sound the unit can produce.

CLIP
-6dB
-12dB
-24dB
-36dB
-48dB
PARM CHECK	EDITED

Number of the currently selected patch

(01, 02,…99, 00)

1. Use the VALUE UP/DOWN keys to select the number of the desired patch.

The VALUE UP key switches to higher patch numbers and the VALUE DOWN key to lower patch numbers.

2. While playing the instrument or producing sound from the sound source, switch patches to check out the resulting sound.

Bypassing the Effects

You can temporarily turn effect processing off, so that only the original sound is output. This is useful to quickly check the change brought about by an effect.

1. To set the RFX-2000 to the bypass mode, press the BYPASS key while the unit is in play mode.

The BYPASS indicator lights up.

The RFX-2000 has two different bypass states, depending on the effect in the currently selected patch. (For information on which effects use which bypass type, please refer to pages 14 — 23.)

•WET MUTE

In this condition, only the effect sound is muted and the original sound is output. The level of the original sound output depends on the MIX control position. Therefore there may be a drop in volume or the sound may be entirely cut off.

•DRY THRU

The original sound is output without any processing. The setting of the MIX control has no effect on the volume level.

2.To cancel the bypass mode and return the RFX-2000 to the normal state, press the BYPASS key once more.

6 ZOOM RFX-2000

A patch called up from memory can be edited using the front-panel controls. You can for example select different effects and adjust effect intensity and other parameters.

If any parameter is changed from the stored condition, the new parameter value is shown on the display for about 2 seconds, and the EDITED mark (.) at the right edge of the display

	Parameter
LED lights	changed
EDITED mark (.) shown
EDITED

appears. This indicates that the current patch has been edited. Because the LED of the control knob that was used to adjust the value also lights, it is easy to see which parameter has been edited.

Note:

When the effect is changed, the LEDs of all control knobs except the MIX control light up.

Selecting an Effect

The effect determines the type of sound processing that is performed. To select an effect, use the BANK key and EFFECT TYPE selector.

depends on the current BANK position.

• Left side BANK selected

Pressing the BANK key cycles through the following banks: REVERB DELAY EFFECTS REVERB etc.

Bank switching

REVERB DELAY EFFECTS

BANK

setting currently selected with the BANK key.

REVERB or SFX bank selected

DELAY or RE-MIX bank selected

BANK key

• Right side BANK selected

Pressing the BANK key cycles through the following banks: SFX RE-MIX MIXDOWN SFX etc.

Bank switching	EFFECTS or MIXDOWN bank selected

SFX RE-MIX MIXDOWN

BANK key

•When a changed bank is returned to the original setting, the respective BANK LED flashes for 1 second.

Note:

For patches where the EXTRA bank is selected, all six BANK LEDs light up.

•When the EFFECT TYPE selector is moved, the display shows the effect number (1 — 8 in the normal banks) for about 2 seconds.

•When the effect number is changed from the last stored condition, the LED of the EFFECT TYPE selector lights up. When the setting is returned to the original effect, the LED goes out.

•When calling up a patch, the LED of the bank where the patch is stored lights up.

Patch a Editing

ZOOM RFX-2000 7

Changing the Value of an Effect Parameter

Each effect of the RFX-2000 consists of certain effect parameters which determine the intensity and tone character of the effect. Effect parameters can be adjusted with the following edit controls.

Storing an Edited Patch

If an edited patch is not stored in memory, the edited contents will be lost when another patch is selected. When wishing to keep the edited patch, store it in memory as follows.

Select the patch and edit it.	the patch.
Press the STORE key.	When wishing to use the same patch number, this step is
not necessary.
The patch number on the display flashes.
4. Press the STORE key once more to execute

	STORE
				the store operation.



STORE key			The patch is stored in memory and the flashing of the





		display stops.



Use the VALUE UP/DOWN keys to select the	If you press the CANCEL key instead of the STORE key,
the operation is aborted and the unit reverts to the
patch number in which you want to store
condition of step 1.

The RFX-2000 offers various handy functions for editing patches.

Checking the parameter value (parameter check)

You can also check a parameter value without moving its associated front-panel control.

1. Press the PARM CHECK key.

The PARM CHECK mark (.) in the center of the display appears and the EFFECT TYPE selector LED flashes for about 2 seconds.

This indicates that the effect setting is being checked. The number of the currently selected effect (1 — is shown for about 2 seconds on the display. The display then reverts to the original condition.

	Effect number			LED flashes

PARM CHECK

PARM CHECK mark (.)

PARM CHECK key

2. To check another parameter, press the PARM CHECK key again before the display indication reverts to the previous condition.

8 ZOOM RFX-2000

With each push of the PARM CHECK key, the parameter to be checked is advanced successively.

REV CHARACTER

Parameter adjusted with REV CHARACTER (EDIT 1) control

PARM CHECK

REV TIME

Parameter adjusted with REV TIME (EDIT 2) control

PARM CHECK

REV EQ LOW

Parameter adjusted with REV EQ LOW (EDIT 3) control

PARM CHECK

Comparing the Sound Before and After Edit (Compare Function)

This function allows you to compare the currently edited sound to the sound before editing.

1. Press the COMPARE key.

The currently edited patch is temporarily returned to the condition before editing. The indication «CP» and the patch number flash alternately on the display, and the «EDITED» mark is out.

	COMPARE key		Shown
	alternately
	COMPARE

2. To return to editing, press the COMPARE key once more (or press the CANCEL key).

•If desired, you can check the original value of each parameter by pressing the PARM CHECK key while the unit is in the compare mode.

•Moving any of the controls in compare mode has no effect.

Setting Parameters With the Tap Key (Tap Input)

The RFX-2000 allows input of time-based parameters by tapping the TAP key at the desired intervals. For example, the flanger modulation speed or delay time can be easily matched to the tempo of a song in this way.

1. Select a patch for which tap input is possible.

Whether tap input is possible or not depends on the effect selected for that patch (see pages 14 — 23). When a patch for which tap input is possible is selected, the TAP LED flashes.

TAP

2. Hit the TAP key several times in the desired interval.

The delay time or rate is set according to the tap interval and the tap beat parameter set for the respective patch (see page 12).

3. If desired, store the patch.

The parameter changed by tap input will revert to the original setting when the patch is switched. If wishing to retain the change, you should therefore store the patch.

•The parameter which can be set by tap input is preset (see pages 14 — 23).

•The maximum interval that can be measured by the tap input function is 2 seconds.

•If the tap input interval is outside the setting range for that parameter, it will be corrected to an acceptable value.

•If a parameter was set by tap input and is then changed by moving the control knob for that parameter, the control knob setting will override the tap input.

Functions Useful

ZOOM RFX-2000 9

You can only view or download manuals with

Upload your files to the site. You get 1 for each file you add

Get 1 for every time someone downloads your manual

Buy as many as you need

Источник

Using the VOCODER Effect

MD player or sampler or similar

with recorded voice

Synthesizer

Microphone